Beli Mikron Wf 51 D bekas (187)

Kondisi: bekas, Inrush current limiter, soft starter, softstarter, starting current limiter, soft start reactor - Manufacturer: varimax, soft start reactor / three-phase reactor from CNC milling machine Mikron WF 51C/155 - Type: D 1515 S3 - Current rating: 10 A Itedpfxjkzpnge Ag Rod - Dimensions: 180/90/H190 mm - Weight: 9.5 kg

Kondisi: bekas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Iedpfx Agskzpm Ho Retd -Manufacturer: LAPP, three-phase transformer removed from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300 VA -Primary: 3x380 V -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Kondisi: bekas, Tahun pembuatan: 1990, x-menet 450 mm y-menet 400 mm z-menet 400 mm Heidenhain 355 vezérlés Teljes energiaigény 4 kW Itjdpfspxrknsx Ag Rjd Gép súlya kb. 2,4 t

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 956.71.80.288, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 300 mm, model controller: HEIDENHAIN TNC 150, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Mesin dilelang akibat penutupan operasi. Penawaran mengikat untuk pengambilan tepat waktu antara 26.01.2026 dan 29.01.2026! DETAIL TEKNIS Perjalanan sumbu X: ca. 300 mm Perjalanan sumbu Y: ca. 300 mm Perjalanan sumbu Z: ca. 300 mm Kepala alat: SK 40 Dimensi meja: 1.000 x 500 mm, dengan 7 alur DETAIL MESIN Kontrol: HEIDENHAIN TNC 150 Data Listrik Tegangan operasi: 380 V Frekuensi: 50 Hz Arus nominal: 25 A Koneksi: 10,5 kW Dimensi & Berat Dimensi (P x L x T): 2.500 x 2.400 x 2.200 mm Berat: 2.000 kg PERLENGKAPAN Dokumentasi Collet Itedjxqg Itspfx Ag Rod Kotak blok ukur akhir

Kondisi: bekas, Tahun pembuatan: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm Table clamping surface 1000 x 500 mm Spindle taper SK 40 Control HEIDENHAIN TNC 150 Spindle speeds 31.5 - 3150 rpm Iodpfstqqplex Ag Retd Feeds - longitudinal/cross/vertical 1 - 3000 mm/min Rapid traverse longitudinal and cross 6 m/min Rapid traverse vertical 4 m/min Quill stroke 110 mm Distance spindle nose to table max. 559 mm Table load capacity max. 500 kg Total power requirement 14 kW Machine weight approx. 3.1 t Machine dimensions L x W x H 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamping and extendable quill, fixed table, coolant system

Kondisi: bekas, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travels: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 rpm Itodpfx Agsc Tt Hrj Red Accessories: Angle table, coolant system, various tool holders

Kondisi: bekas, Tahun pembuatan: 1989, nomor mesin/kendaraan: 6766, Travel X-axis: 560 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rate x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Required space approx.: 2.6 x 1.8 x 2.2 m Itjdpfx Ascxxpqog Red Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light

Kondisi: baik (bekas), Tahun pembuatan: 1991, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 400 mm, Pergerakan sumbu x: 560 mm Pergerakan sumbu y: 500 mm Pergerakan sumbu z: 400 mm Kontrol: TNC 360 Isdpfoytfhlsx Ag Rotd Kecepatan spindel: 40–4.000 rpm Kebutuhan daya total: 7,5 kW Berat mesin sekitar: 2,6 t Dimensi ruang sekitar: 2,6 x 1,8 x 2,2 m

Kondisi: siap digunakan (bekas), Speed: 3,150 rpm, Travel X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40 / M16, Distance spindle head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Machine dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Itedpstuwk Usfx Ag Rsd

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), X-axis travel: 560mm, Y-axis travel: 500mm, Z-axis travel: 400mm, vertical clamping table dimensions: 300x450mm, number of threaded holes: 2x6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460x800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. recommended workpiece weight: 350kg. Spindle drive: number of working spindle speeds: 21, speed range (geometrically graduated): 40-4000 rpm, step progression: 1.259, spindle motor power: 3.3 / 4 kW, tool interface: ISO 40 / M16 with draw-in slot, vertical quill stroke: 90mm, infinitely variable feed in all 3 axes: 2–3000mm/min, rapid traverse X and Y axes: 6000mm/min, rapid traverse Z axis: 4000mm/min, feed motor torque (longitudinal and cross): 3.5Nm each, feed motor torque (vertical): 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, machine weight with vertical milling head and angle table: 2410kg, pallet base weight: 170kg, transport crate weight: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20 tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An inspection on site is possible. Ijdpfx Agjxcxz Ne Rjtd

Kondisi: baik (bekas), Main spindle with drive motor, universal milling head, milling arbor, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical drawing -Overall dimensions: 1700/580/H700 mm -Weight: approx. 525 kg Itsdekvrptepfx Ag Rsd

Kondisi: bekas, Three-phase transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer removed from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power rating: 4.5 kVA -Primary: 3x380 V -Secondary: 3x95/165 V Ijdekyy Uqepfx Ag Rotd -Dimensions: 335/135/H350 mm -Weight: 41 kg

Kondisi: bekas, Ball screw with nut, Transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded bar, ball screw drive, linear bearing, precision ball screw - Manufacturer: Mikron, ball screw drive from CNC milling machine Mikron WF 51C/155 - Thread length: 540 mm - Shaft: Ø 32 mm - Dimensions: see photos - Overall size: 870/140/H130 mm Itedpfxskvrqie Ag Rjd - Weight: 18 kg

Kondisi: baik (bekas), Servo drive, servo board, input processor, control board, input board, controller, converter, controller, servo module, axis amplifier, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier -Manufacturer: Bosch, fully equipped transistor amplifier from Mikron WF 51C/155 CNC milling machine -Type: TR15-XA-140-230V -Control boards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg Ijdewd N S Depfx Ag Rstd

Kondisi: baik (bekas), permanent-magnet-motor-si Ijdpfx Agjkxhpuo Rotd

Kondisi: baik (bekas), Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Iedpjkzpmuefx Ag Rotd -Manufacturer: Trasfor, Transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo nameplate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Kondisi: sangat baik (bekas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot pitch: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step ratio: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Itjdpfx Ajlnfggjg Rod Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travels Longitudinal travel of clamping table (X-axis): Automatic: 400 mm Cross travel of clamping table (Y-axis): Automatic: 400 mm Vertical travel of clamping table (Z-axis): Automatic: 385 mm No guarantee is given for the accuracy, completeness or currency of the information provided.

Kondisi: bekas, Tahun pembuatan: 1980, X-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 – 2240 rpm Infinitely variable feed: 1 – 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Heidenhain TNC 131 control, tilting device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping of all axes; the working axis is automatically released, all axes can be released for manual operation. Ijdpfxjcxxq De Ag Retd

Kondisi: bekas, Tahun pembuatan: 1985, x-axis travel 500 mm y-axis travel 500 mm z-axis travel 350 mm Table surface 800 x 450 mm Spindle taper: ISO 40 Iedpetv Ia Tsfx Ag Rotd Quill stroke mm Feeds - longitudinal and cross mm/min Feeds - vertical mm/min Speed range max. 3150 rpm Supply voltage 380 V / 50 Hz Drive power 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Kondisi: baik (bekas), en-001 Iodpfswiucfox Ag Rjtd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 400 mm, jenis arus masuk: tiga fasa, tegangan masuk: 380 V, arus masuk: 20 A, frekuensi input: 50 Hz, Kami menawarkan mesin milling Mikron WF31D/TNC355 siap pakai ini, tahun pembuatan 1989. Pemrosesan vertikal dan horizontal Tegangan fasa: 380 V Frekuensi: 50 Hz Isdpfeyhatlsx Ag Rstd Arus: 20 A Daya: 9 kW Tegangan sirkuit kontrol: 24 V Nomor diagram: 152.34.80.805 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: bekas, nomor mesin/kendaraan: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine - Clamping table: 800 x 445 mm - Travel: X/Y/Z 500/500/385 mm Itodpfx Ajfbma Nsg Rjd - Spindle taper: SK40 - Quill stroke: 90 mm - Speeds: 31.5 to 3150 rpm - Coolant system - Dimensions: 1475/1770/H2000 mm - Weight: 1966 kg

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 956.71.80.274, panjang pemakanan sumbu X: 600 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 400 mm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, The machine shown is in excellent condition and ready for immediate use. Itedpfx Aownq Sgeg Rsd No heavy roughing operations have ever been performed with this machine. The machine is sold together with a vise, including the tool cabinet with the contents as shown. Additionally included are 2 sets of ground parallels, as well as approximately 80 cutters, all in usable condition (some barely used), some like new, mostly with solid carbide coating, suitable for machining steel and aluminum.

Kondisi: bekas, x3001 Iodpfx Agsxv D U Is Rstd

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 152.41.80.203, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 460 mm, kecepatan rotasi (maks.): 3.150 rpm, model controller: HEIDENHAIN TNC 150, 43 Ijdpfx Asyr H Ukjg Rotd