Beli Nakamura Tmc 15 bekas (40)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Maximaler Schneiddurchmesser 640 mm, maximale Schneidlänge 1.100 mm, Stangendurchlass 80 mm, B-Achse -120/+105 Grad, C-Achse 0,001 Grad, Spindelleistung 18,5 kW, Spindeldrehzahl 3.500 U/min, Fräserleistung 15 kW, Fräserdrehzahl 12.000 U/min, Gegenspindeldrehzahl 3.500 U/min, 40-fach Werkzeugwechsler (ATC), Y-Achsen-Verfahrweg +/- 125 mm, Fanuc 31i Steuerung, Stangenlademagazin, Rjdpfxstt Nrts Adcjch Späneförderer, Teilefänger.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 18.5 kW - Spindle speed: 59 – 4500 rpm - Max. bar diameter: 65 mm - Max. machining diameter: 250 mm - Max. main chuck diameter: 215 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 59 – 4500 rpm - Max. bar diameter: 51 mm - Max. machining diameter: 165 mm - Minimum C-axis resolution: 0.001° - Travel: 575 mm - Distance spindle / sub spindle: 250 – 870 mm TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 195/600 mm - Y-axis travel: ±42 mm Redeuhafrjpfx Adcoch - Driven tool speed: 80 – 3600 rpm - Driven tool power: 5.5 kW TURRET 2 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 195/600 mm - Driven tool speed: 80 – 3600 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Operating voltage: 400 V - Total power consumption: 63 kVA WEIGHT AND DIMENSIONS - Footprint: 3475 x 1933 mm - Machine height: 2225 mm - Machine weight: 6000 kg MACHINE HOURS - Power-on hours: 42,932 h - Spindle hours: 12,433 h EQUIPMENT - Control: 18i-TB - 3-color status signal lamp - Coolant tank * with high-pressure pump: 25 bar - Chip conveyor - Parts extraction unit - Parts belt conveyor - Bar feeder: LNS QUICK LOAD SERVO 3 - Number of driven tool holders: 6 - Number of fixed tool holders: 15 - Collet chuck

Kondisi: bekas, Tahun pembuatan: 2003, de-hu-001 Rcsdpfx Adexiy Auscoh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function Rcsdpfx Adox D Iuzecsh • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Tahun pembuatan: 2006, Kondisi: baik (bekas), Stangenkapazität 42 mm – drei Revolver mit jeweils 12 Stationen (3 x Y-Achse +/- 31 mm) – LNS Sprint S3, Baujahr 2007, mit Hinterlademagazin – umfangreich ausgestattet – Fanuc 31iTA Steuerung Rcjdpfx Asn Hvdkodceh

Kondisi: sangat baik (bekas), Doppelspindel_Y-Achse Rcodpfxex A Eupe Adceh

Kondisi: bekas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 18.5 kW - Spindle speed: 59 - 4500 rpm - Max. bar capacity: 65 mm - Max. machining diameter: 250 mm - Max. main spindle chuck diameter: 215 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 59 - 4500 rpm - Max. bar capacity: 51 mm - Max. machining diameter: 165 mm - Minimum C-axis resolution: 0.001° - Travel: 575 mm - Distance between spindle and sub spindle: 250 - 870 mm TURRET 1 - Number of stations: 12 - Number of driven stations: 12 - Travel X/Z: 195/600 mm - Driven tool speed: 80 - 3600 rpm - Driven tool power: 5.5 kW TURRET 2 - Number of stations: 12 - Number of driven stations: 12 - Travel X/Z: 195/600 mm - Driven tool speed: 80 - 3600 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 63 kVA WEIGHT AND DIMENSIONS Rcsdpfxeuhafxj Adcoh - Installation area: 3475 x 1933 mm - Machine height: 2225 mm - Machine weight: 7800 kg MACHINE HOURS - Power-on hours: 58,774 h - Spindle hours: 19,265 h EQUIPMENT - CNC control: 18i-TB - 3-color status light - Coolant tank * with high-pressure pump: 25 bar - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 11 - Number of fixed tool holders: 11 - Collet chuck

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Max. bar capacity: 51 mm - Max. machining diameter: 195 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5" - Spindle drive power: 7.5 kW - Spindle speed: 6000 rpm - Max. bar capacity: 42 mm - Minimum C-axis resolution: 0.001° TRAVELS - Z-axis travel: 400 mm - X-axis travel: 150 mm - Rapid traverse speed: 36 m/min - Distance spindle/sub spindle: 600 mm TURRET HEAD 1 - Number of stations: 24 - Number of driven stations: 12 Rodpsw Efgaefx Adcoch - X/Z axis travel: 400/150 mm - Y axis travel: +/-40 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.1 kW TURRET HEAD 2 - Number of stations: 9 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 3072x1974 mm - Machine height: 1799 mm - Machine weight: 6500 kg EQUIPMENT - Control: Fanuc 0i-TF PLUS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - 3-colour status lamp - Coolant tank * Internal coolant supply (ICS) - Chip conveyor: DROITE LNS MH500 - Tool measurement probe - Parts removal - Parts conveyor belt - Bar feeder interface - Electrical transformer

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 9 - Jumlah spindel: 2 SPINDEL UTAMA - Taper spindel: A2-5 - Daya penggerak spindel: 11 [kW] - Kecepatan spindel: 4500 [RPM] - Diameter batang maksimum: 65 [mm] - Diameter benda kerja maksimum: 200 [mm] - Resolusi minimum sumbu C: 0,001 [derajat] SPINDEL KONTRA - Taper spindel: A2-5 - Daya penggerak spindel: 11 [kW] - Kecepatan spindel: 5000 [RPM] - Diameter batang maksimum: 51 [mm] - Diameter benda kerja maksimum: 200 [mm] - Resolusi minimum sumbu C: 0,001 [derajat] - Jarak gerakan: 780 [mm] - Jarak antara spindel / spindel kontra: 980 [mm] SPINDEL PEMBUAT ULIR DAN PEMOTONG - Jarak gerakan X/Z: 570/1297 [mm] - Jarak gerakan Y: +/- 100 [mm] - Sudut sumbu B: 190 (+/-95) [derajat] - Tipe alat: Capto C4 - Kecepatan spindel: 12000 [RPM] - Daya penggerak spindel: 7,5 [kW] PENGGANTI ALAT - Tipe pengganti alat: Bras chargeur Rcsdpfjuhamcjx Adcsh - Jumlah alat dalam majalah: 48 (2x24) KEPALA TURRET BAWAH - Jumlah posisi: 24 - Jarak gerakan X/Z: 130,5/658 [mm] - Kecepatan alat penggerak: 6000 [RPM] - Daya alat penggerak: 7,1 [kW] SUPPLY LISTRIK - Tegangan suplai: 380 [V] BERAT DAN DIMENSI - Ruang yang dibutuhkan: 2700x3460 [mm] - Tinggi mesin: 2857 [mm] - Berat mesin: 14500 [kg] JAM KERJA MESIN - Jam operasi: 11000 [jam] AKSESORI - Kontrol: Fanuc 31iA-5 - Tangki pendingin * dengan pompa tekanan tinggi: 25 [bar] * Suplai pendingin internal (IKZ) - Konveyor serpihan: Droite - Pendingin spindel - Transformator listrik - Cekam 3 rahang: SCHUNK 215 / SCHUNK 165

Kondisi: bekas, Tahun pembuatan: 1992, Serial number 31302 Fanuc control with twin spindles Max. turning diameter: 600 mm X-axis travel: 1000 mm with magazine extensive accessories: approx. 100 tool holders, including driven tools Machine weight: approx. 13 t +++++ Rsdpfehn T D Ijx Adcech Please note that the machine has been dismantled and is ready for loading. For this reason, a demonstration under power or production of a video is not possible. Furthermore, our listing contains the most representative photos of the best possible quality. Unfortunately, sending additional images is not possible. +++++

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 161 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 580 mm, jumlah sumbu: 7, Nakamura Tome WY-250 7-sumbu ini diproduksi pada tahun 2007. Mesin ini dilengkapi dengan konfigurasi spindle ganda dengan kemampuan sumbu Y pada kedua turret, yang memungkinkan pemesinan serbaguna. Mesin ini memiliki jarak gerak maksimum sumbu Z sebesar 580 mm dan jarak gerak sumbu Y sebesar mm. Jika Anda mencari fungsi pembubutan berkualitas tinggi, pertimbangkan Nakamura Tome WY-250 mesin bubut horisontal yang kami tawarkan untuk dijual. Silakan hubungi kami untuk detail lebih lanjut. • Jarak gerak: • X1: 160,5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Alat yang disertakan: • 4x dudukan alat eksternal • 4x dudukan alat untuk penempatan simultan 2 alat berlawanan • 6x dudukan boring bar • Dudukan alat bertenaga (HEIMATEC): • 4x radial • 4x aksial • Dudukan collet (Bellegrandi): • Spindle utama: MSCNT70-A6" untuk collet ukuran 70 BA dan BD, lengkap dengan cup terkait • Subspindle: MSCTNR70-A5" untuk collet ukuran 70 BA, lengkap dengan ejector pegas Peralatan tambahan • IEMCA Master 880/33/P Barfeeder (2003), S/N: 0200347S03 • Aplikasi: Majalah pemasukan batang otomatis untuk mesin bubut CNC • Kapasitas: • Panjang batang maksimum: 3300 mm (perlu konfirmasi) • Diameter batang maksimum: hingga Ø80 mm (referensi keluarga model) • Saluran pemandu: Ø65 mm termasuk; Ø70 mm saat ini terpasang dan dapat dikirim bersama mesin • Fitur: Pemuatan/feeder otomatis, sinkronisasi dengan siklus pembubutan, kompatibel dengan sistem collet spindle/saluran pemandu, rangka kokoh • Catatan: Dijual bersama Nakamura Tome WY-250; beberapa aksesoris/saluran pemandu dapat menjadi bagian dari perlengkapan mesin bubut • Satu set lengkap jaw tangan ("Manine") untuk parts catcher (parts catcher sendiri tidak dicantumkan) Kondisi mesin / Status teknis – PENTING Mesin dijual dalam kondisi teknis saat ini dan penjual TIDAK akan melakukan perbaikan sebelum penjualan. Poin masalah / kondisi penting yang diketahui: • Turret bawah dengan alat bertenaga tidak berfungsi dengan baik • Masalah dengan sistem pelumasan udara/minyak terdeteksi • Karat ditemukan di dalam gearbox turret bawah • Gearbox turret atas diisi dengan gemuk NBU15, meskipun sistem seharusnya bekerja dengan pelumasan udara/minyak • Panduan linier/slideway sumbu Z1 perlu diganti • Panduan linier/slideway sumbu Z2 perlu diganti • Penyimpangan geometris ditemukan selama pemeriksaan mesin • Deviasi run-out terukur pada spindle/rem/silinder hidrolik • Beberapa bearing, ball screw, seal, roller pemandu, sabuk, komponen pelumasan, dan scrapper harus diganti sesuai daftar suku cadang terlampir Sorotan inspeksi: • Geometri mesin dan paralelitas spindle telah diukur dan didokumentasikan • Nilai run-out spindle dan sistem penjepit hidrolik telah ditentukan • Komponen pelumasan dan proteksi pada beberapa sumbu perlu perawatan/penggantian • Daftar suku cadang rinci tersedia Dokumentasi yang disertakan: • Laporan inspeksi teknis Rcedey N Spcjpfx Adcoh • Laporan pengujian geometri • Daftar/daftar penggantian suku cadang

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 555 mm, jarak pergerakan sumbu X: 195 mm, jarak lintasan sumbu Y: 82 mm, jarak gerak sumbu Z: 600 mm, diameter benda kerja (maks.): 250 mm, TECHNICAL DETAILS Counter spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool positions upper turret: 12 Number of tool positions lower turret: 12 All tools driven Main spindle nose: A2-6 Counter spindle nose: A2-5 Rcsdjynhihjpfx Adcoh Feed power X1/X2/Y axis: 1 kW Feed power Z1/Z2 axis: 2.1 kW Max. loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle drive power: 18.5 kW / 15 kW Counter spindle drive power: 11 kW / 7.5 kW Bar loader Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm 8 pushers with pusher rod cones Intermediate sizes can also be loaded Unloading magazine Max. bar length: 2 m EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last bar loader overhaul 09/2020 (channel exchange, replacement of various bearings, replacement of pusher rods and spindle guide tubes, including maintenance)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, saluran batang: 34 mm, model controller: Fanuc 21T Modell B, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Diameter lubang batang: 34 mm DETAIL MESIN Kontrol CNC: Fanuc 21T Model B PERLENGKAPAN Sumbu CS kiri Rcsdpfx Adsyrf Enocsh Sumbu CS kanan Sekitar 26 dudukan tetap 2x dudukan penggerak (1x aksial, 1x radial) Chuck collet Hainbuch kiri dan kanan Konveyor serbuk Manual Catatan: Bar feeder tidak termasuk dalam penawaran.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, The tool holder is brand new and still in its original packaging. There is also a second one available, which, although used, shows no signs of wear (see photo). Spindle MTSK-40 Transmission ratio: 1:1 Max RPM: 6000 Maximum torque [Nm]: 50 External coolant: Yes Internal coolant: Yes Internal coolant pressure: 30 BAR The holder can also be used for the following CMZ machines: CMZ - TA15M/Y/MS/MY/YS 15 ST. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 ST. CMZ - TA25M/Y/MS/MY/YS 15 ST. Rodpfxeuzwutj Adcoch CMZ - TA30M/Y/MS/MY/YS 15 ST. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Kondisi: baik (bekas), Tahun pembuatan: 1990, 2 EINHEITEN verfügbar STEUERUNG FANUC 0 CNC-Drehmaschine Technische Daten: Drehdurchmesser: 165 mm Drehlänge: 200 mm Steuerung: Fanuc 18 TB X-Achse: 2x 195 mm Z-Achse: 265 (B 780) mm Stangendurchlass: 50 mm C-Achse: 0,001° Drehzahlen: 50–5.000 U/min Werkzeugrevolver mit 12 Stationen (2 x 12) Drehzahlen: 180–3.600 U/min Zubehör: Späneförderer Rcjdpfx Adjd S U Dgscsh