Beli Okuma Lc 50 bekas (232)

Kondisi: baik (bekas), Tahun pembuatan: 2002, Ref.-No.: 10434 Produsen: OKUMA Tipe: LC 40 Tahun Pembuatan: 2002 Jenis Kendali: CNC Dksdpfxey Ed Aye Aaqjl Kontrol: FANUC 18-i TB Lokasi Gudang: Halberstadt Negara Asal: Jerman Kecepatan Putar: 10 - 2.800 rpm Lubang Batang: 91 mm Diameter Chuck: 450 mm Diameter Senter Tailstock: 120 mm Diameter Pembubutan: 550 mm Panjang Pembubutan: 800 mm Diameter Putaran: 800 mm Lubang Spindel: 90 mm Hidung Spindel: A2-8 Jarak Gerak Lengan Tailstock: 150 mm Total Daya Terpasang: 44 kW Berat Mesin kira-kira: 8 ton Jumlah Stasiun Perkakas: 12 unit.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 21.269 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0082, panjang pembubutan: 1.500 mm, diameter pembubutan: 580 mm, jarak pergerakan sumbu X: 598 mm, jarak lintasan sumbu Y: 230 mm, jarak gerak sumbu Z: 1.660 mm, TECHNICAL SPECIFICATIONS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001 ° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed speed: 0.001 - 1,000 mm/rev Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) pos. Driven stations: infinitely variable Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirements: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Dksdoyxmyujpfx Aaqjl Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure cooling, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Kondisi: siap digunakan (bekas), 001 Dedsyttwzjpfx Aaqekl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0082, panjang pembubutan: 1.500 mm, diameter pembubutan: 580 mm, jarak pergerakan sumbu X: 598 mm, jarak lintasan sumbu Y: 230 mm, jarak gerak sumbu Z: 1.660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travel X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool positions: 2 (1x L-Tool / 1x M-Tool) Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Dodexb Awfepfx Aaqskl Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space and weight Floor space approx.: 6.0 x 3.2 x 3.0 m Machine weight approx.: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel 44 various tool holders

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0014, panjang pembubutan: 1.500 mm, diameter putar di atas sled silang: 610 mm, jarak pergerakan sumbu X: 598 mm, jarak lintasan sumbu Y: 230 mm, jarak gerak sumbu Z: 1.660 mm, TECHNICAL DETAILS Travels Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm C-axis: 0.001° Turning length: 1,500 mm Swing diameter over cross slide: 610 mm Dkedpfx Ajxqyikjaqol Swing diameter: 580 mm Spindle Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid traverse Rapid traverse Z-axis: 20 m/min Rapid traverse X/Y: 12,000 mm/min Rapid traverse C: 100 min^-1 Cutting feed rate X/Z/Y: 0.001 – 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Turret type: H2 ATC Tool stations: 2 (1x L-tool / 1x M-tool) Driven tool stations: stepless Spindle speed – driven tool stations: 40 – 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Quill taper: MK 5 MACHINE DETAILS CNC control: OSP 7000L Total power requirement: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Kondisi: siap digunakan (bekas), jam operasional: 13.245 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, beban meja: 800 kg, kecepatan spindel (maks.): 5.000 rpm, RINCIAN TEKNIS Perjalanan sumbu X: 700 mm Perjalanan sumbu Y: 800 mm Perjalanan sumbu Z: 700 mm Ukuran meja: 500 mm × 500 mm Meja putar: terindeks dalam langkah 1°, 360 posisi Kapasitas beban meja: 800 kg Kecepatan spindle: 5.000 rpm Jarak hidung spindle-ke-permukaan meja: 150 mm – 850 mm Tipe holder alat: BT 50 Majalah alat (ATC): 60 slot, majalah rantai Panjang alat maksimum: 450 mm RINCIAN MESIN Kontrol: CNC OSP U100M Dimensi & Berat Berat mesin: 21.000 kg Dimensi (P x L x T): 5.500 x 3.160 x 3.300 mm Dsdpfsxghcdex Aaqokl Jam Operasi Jam spindle: 13.245 jam Jam hidup: 27.372 jam PERLENGKAPAN Konveyor serbuk Perangkat presetting alat di meja 2 meja dengan lubang bor MAS untuk pemasangan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 500 mm, daya motor spindle: 22.000 W, jumlah sumbu: 5, The Okuma LB 300M X 500 5-axis lathe was manufactured in 2012. It offers a maximum turning diameter of 340 mm and a turning length of 480 mm. This machine is equipped with a powerful spindle speed range from 45 to 3,800 rpm and a robust 12-station turret. If you are searching for a high-quality lathe, the Okuma LB 300M X 500 horizontal lathe we offer for sale is worth considering. Please contact us for further details. • CNC control: OSP U100L • Maximum turning diameter: 340 mm • Maximum turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increments) • Rapid traverse: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Driven tools: 45-4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool cross-section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; stroke 120 mm; taper MT5 • Certification: CE-certified with manuals Additional Equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blower • Toolholder • 4 radially driven tools • 4 axially driven tools Technical Specification Dkodpfx Aaoy N Sabsqol Taper size: VDI 40 Counter spindle: No Driven tools: Yes

Kondisi: siap digunakan (bekas), Okuma BDU-30A Brushless Servomotor Drive Unit dengan E4809-045-061-D, nomor seri sesuai foto, bekas, terdapat bekas pemakaian normal, 100% berfungsi dengan baik. Dodpei D Naaefx Aaqokl

Kondisi: bekas, Tahun pembuatan: 2014, Detail teknis: Perjalanan x: 760 mm Perjalanan y: 760 mm Perjalanan z: 760 mm Kebutuhan daya total: 43 kW Berat mesin ±: 11,5 t Dksdpfoxrwpdsx Aaqsl Kebutuhan ruang ±: 2,7 x 4,73 x 2,87 m Beban maksimum pada meja: 500 kg

Kondisi: bekas, Tahun pembuatan: 2000, de-to-hu-it-lt Dksdeh D Anaspfx Aaqjl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 1.670 mm, jarak lintasan sumbu Y: 505 mm, jarak gerak sumbu Z: 190 mm, tinggi total: 2.950 mm, lebar total: 2.960 mm, berat keseluruhan: 13.700 kg, panjang produk (maks.): 5.110 mm, jumlah sumbu: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a centre distance of 1500 mm. The machine is equipped with a powerful main and counter spindle, both offering a spindle speed of 3,800 rpm and a milling spindle speed of 12,000 rpm. If you are looking for high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Please contact us for further details. • CNC Control: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, helical interpolation • Centre distance: 1,500 mm • Maximum swing diameter over covers: 550 mm • Maximum turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Chuck: ASA 8" large bore • Counter spindle: • Chuck: ASA 8 super big bore • Spindle speed: 3,800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with driven tools • Axes: • Travel: 1,670 mm / 1,655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 increments • Coolant/pump pressure: 15 bar • Operating hours (as recorded): • 30,870: 8:15 • 13,909:49:34 • 6,594: 8:59 Dsdpfxey Ddiwe Aaqskl • 9,497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Kondisi: bekas, en-001 Dkodpfxoy Er Hys Aaqol

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine has been serviced annually under a maintenance contract with Okuma Okuma Mac Turn 550 W / 9-axis turning-milling center Dkjdpfeyt Nvtjx Aaqel Year of manufacture: 2005, Control: OSP-E 100 L / Expansion kit “M“ Kit One Touch IGF Milling spindle slide X/Y/Z/B, Sub-spindle W axis, Main spindle with C axis, Sub-spindle with C axis, Lower turret slide X/Z axes, Max. turning diameter 720 mm, Turning length 2,000 mm, Distance tailstock tip - spindle nose 2,505 mm, Y axis 250 mm / +/- 125 mm, Main spindle speed up to 3,500 rpm, Spindle drive power 30 kW Lower turret with 12 stations, without live tooling, Lower turret fitted with steady rest, thus only 9 stations instead of 12, Self-centering steady rest 35 - 240 mm, Milling spindle with infinitely variable B axis 0.001°, 80-position tool magazine, HSK 100 tool holder, New Forkardt three-jaw chuck Ø 400 mm, worth €12,000, Sub-spindle currently with mandrel, no chuck fitted / delivery without mandrel, Enlarged main spindle 110 mm Ø 150/110 mm, Spindle nose size 11, 2-stage clamping pressure, Sub-spindle as hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measurement system Y axis, Tool length 450 mm instead of 350 mm, Automatic doors on both sides, Chip conveyor, Gravity band filter with 900 liter clean tank, Frequency-controlled supply pump up to 20 bar, Machine has been serviced annually under a maintenance contract with Okuma In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, linear guides X/Y/Z were renewed. Work performed by Okuma: Machine cleaned. Covers and sheet metal dismantled. 8th axis removed. Column dismantled and removed from the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of ZA-axis cleaned. New ZA linear guide including carriages installed and tightened to specified torque. New ZA ball screw incl. bearings assembled and installed. Base plate of the column installed and tightened to specified torque and bolted to the carriages. Lubrication lines connected. ATC including attachment parts fitted and connected. New YA and XA linear guides installed and tightened to corresponding torque. New YA ball screw incl. bearings fitted. Column mounted and lubrication lines connected. XA base plate placed and aligned. 8th axis mounted and aligned. H1 turret installed - 8th axis drive motor installed - 8th axis and new H1 assembly and geometry adjustment - Functional test 8th axis and H1 - Run-in program for B axis approx. 12h, then drain old oil from 8th axis - Run-in program for H1 and defect report for OEG to be prepared - Left door installed, various sheet metal adapted - Chuck installed - Zero points adjusted - Tool changer checked

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, berat benda kerja (maks.): 800 kg, okuma-millac-550h-hmc-palettensystem Dodpfeyw Rlxox Aaqokl

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Pusat putar dan milling CNC dengan 9 sumbu CNC, Okuma Mac Turn 350 W, tahun pembuatan 2004, OSP-E 100L, majalah alat 80 slot, spindle utama dengan sumbu C, spindle belakang dengan sumbu C, sumbu Y untuk carriage atas/spindle milling, dudukan HSK 63, sumbu B tanpa langkah sebagai spindle milling, jarak pusat 1500 mm, lubang spindle 80 mm, diameter putaran maks 550 mm, diameter pembubutan 350 mm, revolver bawah 12 posisi dengan alat bertenaga, unit filter kompak Interlite 900 l, sistem ekstraksi, waktu operasi spindle sekitar 18.300 jam, konveyor serbuk, lengan pengambil alat telah diganti seluruhnya, pendingin tekanan tinggi, lengan pengukur alat, penukar alat telah direkondisi, spindle utama Kitagawa B - 210, spindle belakang Kitagawa B - 208. Dkjdpfoy Atu Tjx Aaqsl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, CNC Mesin Bubut Okuma LU 3000 EX MY 2SC950 Kontrol: OSP-P300 Tahun pembuatan: 2014 No. mesin internal: 27 Panjang pembubutan maks: 950 mm Diameter pembubutan maks: 340 mm Diameter pembubutan maks di atas peluncur: 380 mm Diameter pembubutan maks di atas ranjang: 580 mm Kecepatan putar maks: 4.200 rpm Sistem penjepitan alat: BMT 2 unit revolver alat Revolver A: 12 posisi alat (semua driven) Revolver B: 8 posisi alat Tailstock Konveyor serbuk Chuck hidrolik B210/A8 Touchsetter Pompa pendingin tekanan tinggi Tangki air diperbesar Dksdpfx Asyluvijaqel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, CNC Mesin Bubut Okuma LB 4000 EX II – M C750 Kontrol: OSP-P300LA Tahun pembuatan: 2017 No. mesin internal: 22 Panjang pembubutan: 750 mm Diameter pembubutan: 430 mm Diameter ayun di atas tempat tidur: Ø 670 mm Diameter ayun di atas carriage: Ø 480 mm Dkedpfx Aaeyk Uimeqjl Kecepatan putar: 42 – 4.200 rpm Revolver alat: V12 (semua posisi digerakkan) Perlengkapan: Konveyor serpihan Touchsetter OneTouch IGF Chuck 3-jaw Tailstock

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Mesin Bubut CNC Okuma LB 4000 EX – MY C750 Kontrol: OSP-P200L Tahun pembuatan: 2008 No. mesin internal: 21 Panjang pembubutan: 750 mm Diameter pembubutan: 430 mm Diameter ayun di atas ranjang: Ø 670 mm Diameter ayun di atas eretan: Ø 480 mm Dkodpfx Aoylkgqjaqel Kecepatan putar: 42 – 4.200 rpm Revolver alat V12 (semua posisi digerakkan) Perlengkapan: One touch IGF Konveyor serpihan Touchsetter Chuck 3-jaw (Kitagawa B212)

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 5.000 rpm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, kecepatan rotasi (maks.): 5.000 rpm, kecepatan rotasi (min.): 25 rpm, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, DETIL TEKNIS 2x Palet 500 x 500 mm Perjalanan sumbu X: 700 mm, sumbu Y: 800 mm, sumbu Z: 700 mm Ukuran meja: 500 mm x 500 mm, meja putar/sumbu B: diindeks dalam langkah 1°, 360 posisi Kapasitas beban meja: 800 kg Kecepatan spindle: 5.000 RPM Jarak hidung spindle-ke permukaan meja: 150 mm - 850 mm Tipe dudukan alat: MAS BT 50 Magasin alat (ATC): 60 slot, jenis rantai Dksdpoyrgzkjfx Aaqjl Panjang alat maksimal: 450 mm DETAIL MESIN Kontrol: CNC OSP 100M DIMENSI & BERAT Berat mesin: 21.000 kg Dimensi (P x L x T): 5.500 x 3.160 x 3.300 mm Jam spindle: 18.500 PERLENGKAPAN Konveyor serbuk, sistem pendingin dengan filter saku untuk pendinginan internal

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, OKUMA LCC15, Dkodpfxsyq S E Se Aaqjl OSP 700L, chuck collet, konveyor serpihan, pompa pendingin, touchsetter, konveyor serpihan, penangkap bagian, turret V12 direct mount, Mesin yang sangat kompak dan berkualitas untuk komponen batang. *Loader batang LNS disertakan gratis dengan mesin, namun bukan bagian dari penjualan dan harus diperbaiki secara elektronik oleh teknisi LNS.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 900 mm, jarak lintasan sumbu Y: 780 mm, jarak gerak sumbu Z: 780 mm, tinggi total: 31.500 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Dear Customer, We have an Okuma MA 500 HB 6APC in good condition available from stock for you. We look forward to your inquiry and send our best regards, Your Neff – The Okuma Specialist Team Datasheet: Control: OSP P200-M Travel X-axis: [mm] 900 Y-axis: [mm] 780 Z-axis: [mm] 780 B-axis: [degree] 1; 360-degree indexing Tool Changer 200 ATC MAS BT50 Tool stations: 200 Tool holder: MAS BT50 Maximum tool weight: [kg] 500 Dedpfxevta Sbs Aaqekl Maximum tool length: [mm] 450 Main Spindle Max. speed: [rpm] 6,000 Power output: [kW] 33 Pallet Station 6 APC Pallet size: [mm] 500×500 Workpiece weight: [kg] 950 Workpiece dimensions: [mm] 800×1000 Additional Features: – Renishaw probe – Renishaw tool break control – Mayfran Concept with high-pressure pump Neff – The Okuma Specialist and NeffBuy Additionally, we are pleased to offer you a complete worry-free package, including inspection at our showroom with machine demonstration and acceptance, loading, transport, installation and commissioning of the machine, operator training, and ongoing service. We provide Okuma CNC service throughout Europe, both electronic and mechanical, and, on top of that, we maintain a 1,200 m² stock of all Okuma spare parts. Please visit our homepage for more information.

Kondisi: sangat baik (bekas), Panjang lintasan: Sumbu X: 155 mm Sumbu Z: 320 mm Diameter ayunan di atas tempat tidur: 450 mm Diameter ayunan di atas dudukan (kereta): 350 mm Diameter pembubutan maksimum: 270 mm Panjang pembubutan maksimum: 500 mm Dkodpfx Aajyvy Utsqol Kecepatan spindle tanpa langkah: 75 – 3500 rpm Motor spindle: 7,5 kW Menara alat: 12 posisi Dimensi (P x T x L): 2200 x 1635 x 1670 mm Berat: 3800 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 760 mm, jarak gerak sumbu Z: 760 mm, tinggi total: 2.864 mm, berat keseluruhan: 11.500 kg, kecepatan spindel (maks.): 15.000 rpm, berat alat: 10.000 g, jumlah sumbu: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet with a maximum load capacity of 500 kg and offers an extensive travel range of 760 mm in the X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 rpm and a 64-position tool magazine, this horizontal machining center is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50-810 mm • Spindle nose to pallet center: 135-895 mm • Table/pallet: 500 × 500 mm; load capacity 500 kg; 1° indexing • Workpiece capacity: max. Ø800 × 1,000 mm • Cutting feed rate: 1-60,000 mm/min; table indexing motor 3.0 kW Dodsx D Rrcjpfx Aaqokl • Tooling: MAS403/BT40 tool holder; MAS 2 retention knob; magazine for 64 tools; random selection • Footprint 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Renishaw probe preparation • Shower/wash system

Kondisi: bekas, OKUMA OSP GRAPHIC PANEL 5000 E0105-800-027 Onderdelen zijn verwijderd uit tot stillegging functionerende productie-installaties. Staat: gebruikt (functionerend) Dedpfxoyn R S Ej Aaqekl

Kondisi: baik (bekas), Tahun pembuatan: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotic loading Description: two-axis X-Z lathe for short workpieces, equipped with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4,500 rpm Coolant system and chip conveyor Dksdpjk Hz Iwsfx Aaqjl