Beli Ondol Kappen Melihat bekas (1.472)

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Reinchardt NC 700 Automatic Crosscut Saw Manufacturer: Reinchardt Model / Machine Type: NC 700 Year of Manufacture: 1998 Giedpfed H Hmhsx Adtol Category: Crosscut Saw Location: Gorzów Wlkp. Delivery Conditions: Collection by the buyer Delivery Costs: Borne by the customer Commissioning: To be agreed Description / Comments: Crosscut saw for custom lengths, cutting accuracy up to 1mm, new controller installed, saw blade feed via hydraulic system.

Kondisi: baik (bekas), Tahun pembuatan: 1962, large band resaw with 1250 mm wheel diameter with central cutting device 45 kW motor Gijdpfxofnh T Ij Adtsl wheel width 120 mm with electric saw blade tensioning upper wheel removed for transport very good condition, as very little used, completely overhauled in 1997

Kondisi: baru, Tahun pembuatan: 2025, The Randek Cut-Out Saw JS400C is designed for making notches at the ends of timber elements, for example, to allow the insertion of a tie beam into upright studs. The machine pneumatically secures the timber and performs two cuts using its two 400 mm diameter saw blades. The maximum notch length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. The saw is quick and easy to operate via foot pedal control. Function Description The timber to be notched, such as a stud, is pushed into the covered cutting slot up to the pre-set stop. The protruding end is supported on a roller stand (not included in the delivery). The timber is pneumatically clamped using the foot pedal, which also initiates the cutting cycle. Technical Specification • Notching depth: 30 - 115 mm • Notching length: 10 - 380 mm • Timber thickness: 30 - 70 mm Giodpfx Ajd Arwhjdtsl • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5 - 0.8 MPa (5 - 8 bar) • Saw blades: HM 400/30-3.5/2.5/40 Safety The saw is effectively shielded by a cover plate to prevent access to moving parts. When the cover is opened, the power supply is automatically interrupted, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple operation • Adjustable working height and foot-pedal operation ensure ergonomically correct working conditions for the operator

Kondisi: baru, Semi-automatic metal band saw with high cutting precision. This machine allows for 90° cuts, as well as mitre cuts, steplessly adjustable: up to 45° to the left and up to 30° to the right. (Swivel range: left 45°, right 60°) Standard features: - Large rotatable support table with no wear! (The cutting channel of the band saw rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation by potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Saw arm lowering via a hydraulic cylinder; stepless adjustment - Easy manual lateral movement (R/L) of the vice - Electric band tension monitoring with saw blade breakage detection - Coolant pump with dual supply to the band guides - Carbide band guides and support rollers - Bi-metal band saw blade M 42 - Chip brush Technical data ● Cutting range: Godpsctgkzjfx Adtjil 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° right round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° left round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° right round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connected load: 3.35 kVA ● Band speed: 20–120 m/min, steplessly adjustable ● Saw blade dimensions: 2910 x 27 x 0.9 mm ● Remnant piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Pada tahun 2026, mesin penggerinda profil kendali otomatis baru untuk gergaji bingkai dengan sistem penggerindaan basah, memungkinkan pengolahan 4 pitch gigi pada satu batang gigi. Diameter batu gerinda 300 mm, dengan sistem hisap kabut gerinda terintegrasi dan inverter frekuensi untuk pengaturan maju dan kecepatan keliling, dilengkapi alat pemotong batu gerinda. Godsg Uzl Ejpfx Adtjil

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), elumatec_profile_cutting_saw_listing Gjdpjw Nykgefx Adtsil

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), de-säge Gehrungssäge mit Bohrwerk BALESTRIERI TECHNA PLUS 3001 Hersteller: BALESTRIERI Modell / Maschinentyp: TECHNA PLUS 3001 Baujahr: 2006 Maschinenkategorie: Säge-Pflug Mobile Schneideeinheit mit Positionierantrieb über Bewegungseinheiten und elektronische Digitalanzeige. Führungen bestehen aus gehärteten Schienen und Umlauf-Linearführungen. • 2 Einheiten mit Ø 400 mm Sägeblatt – jede Einheit angetrieben von einem 3 kW Motor • Leistungsfähigkeit (Radialsystem) der Rollschlitteneinheit • 2 Werkstückauflagen mit vertikalen pneumatischen Spannzangen • 1 indirekter Auflagetisch • Ablesung über elektronische Digitalanzeige • 2 Bohraggregate, ausgerüstet mit je 5 Spindeln (32 mm) – Motoren mit 1,5 kW (Drehzahl: 5500 U/min) – Schlitten zur Bewegung der Bohrvorrichtung • Mechanisches Messsystem zur vertikalen und horizontalen Korrektur – Bohreinheiten können horizontal oder vertikal positioniert werden • Zyklusstart durch Zweihandbedienung (entspricht den Sicherheitsvorschriften) und pneumatische Fußtaster • Automatische Abfallentsorgung • Maximale Schnitthöhe: 145 mm • Maximale Schnittbreite: 300 mm Giodpfx Adjd Ifgvotsl • Minimale Schnittlänge: 170 mm (bei automatischer Be- und Entladung 355 mm) • Maximale Schnittlänge: 3.100 mm Schnittbreite 300,0 mm Schnitthöhe 145,0 mm Motorleistung 1,5 kW ----- Abmessungen (L x B x H): - × - × - Gewicht: 2.300 kg Betriebsstunden: - Elektrischer Anschluss: - Guter technischer Zustand CE-konform ----- Gewicht: 2.300 kg

Kondisi: baru, NEW Description: - Crosscut and mitre circular saw with a maximum cutting height of 135 mm - Saw head can be mitred in two planes - Durable cast iron construction - Precision linear ball bearing carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable hard stops at 90° and 45° - Lower blade guard connectable to extraction system Scope of delivery: Gisdpfx Ajvwf T Sjdtel Crosscut and mitre circular saw type ZS 135 N, without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Horizontal mitre range: 45°-90°-25° - Vertical mitre range: 90°-45° (tilting left) - Saw blade diameter: 350 mm - Extraction port diameter: 100 mm - Weight: 100 kg

Tahun pembuatan: 2024, Kondisi: baru, Universal mitre saw; height adjustment 1,100 mm; swivelling support +/- 180°; saw stroke 900 mm; saw blade diameter 500 mm Giodpfjd A Huwex Adtel

Tahun pembuatan: 1986, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 43153, Heavy-duty circular saw automatic machine, manufacturer Wagner Reutlingen, 1000 mm saw blade diameter. Further information to follow. Gsdpfx Aded N Uw Rjteil

Tahun pembuatan: 1976, Kondisi: sangat baik (bekas), Frame saw / Reciprocating saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 75 HP, 380 V, 50 Hz Giedjpyglijpfx Adtel Maximum opening: 710 mm Stroke: 500 mm Equipped with Marathon 2 riving knife Very good condition – immediately available Location: Austria, near Feldkirch

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), An aluminium mitre saw by Eisele, including a mobile extraction unit from AS Sägetechnik, is available. Gedpfx Asw D Et Rodtjil 1) Mitre Saw Pressta Eisele GS 600, Year of manufacture: 2023, Saw blade diameter: 600 mm, Indexing points: 22.5° / 45° / 90°, Mitre adjustment: 20° / -90° / -20°, Material stop shift: 200 mm, Working height: 970 mm, Extraction port diameter: 100 mm, Weight: approx. 650 kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, Extraction port diameter: 100 mm, Airflow: 1,400 m³/h, Machine dimensions (L/W/H): approx. 750 mm / 800 mm / 1,800 mm, Weight: approx. 100 kg. Documentation available. An on-site inspection is possible.

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), GOMAD FBKSR SLIDING TABLE SAW For sale: GOMAD FBKSR panel saw, table length 3800 mm. Condition as shown in photos, year of manufacture 2011, available with or without extraction unit, complete with documentation and operating manual. The machine is fully operational, price on request. Features: Gisdpfxeia Ngte Adtsl - Equipped with scoring unit, both cradles in good technical condition - Main saw blade diameter: 400 mm, scoring saw blade: 100 mm - 45-degree cutting: length 2800 mm, cutting width 1250 mm, electronic fence - Blade speeds: 4000 / 5000 / 6500 rpm - Weight: 990 kg

Kondisi: baru, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm - Saw can be set for mitre cuts in two planes - Robust cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable and recalibratable fixed stops at 90° and 45° - Lower saw blade guard can be connected to extraction system Scope of delivery: 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 N Incl. surcharge for 3 kW 400 Volt motor 1 x Machine stand for Type ZS 135 N and ZS 170 N Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilted left) - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Gijdpfx Adjvwf Rdetsl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: - Motor power: 2.2 kW S1 - Max. saw blade diameter: 350 mm - Saw blade bore: 30 mm Gisdpfxefhbuyj Adtel - Cutting time per stroke: 1.5 sec. - Spindle speed: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction port: 2x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 200 kg - Required air flow: 1000 m³/h - Voltage: 400 V / 50 Hz, 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard Features: - Pneumatically driven saw blade feed - Automatic motor brake - Set of operating keys - Emergency stop button - Feed rate controller for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety hold-down (protective hood) - Minimum extraction speed: 28 m/sec - Colours: Base frame light grey RAL 7035, doors tele grey RAL 7046, protective shield and hood zinc yellow RAL 1018 - Incl. HW circular saw blade for wood 350x3.5x2.4x30 mm Z72

Kondisi: bekas, TECHNICAL DATA - Round capacity: 360 mm - Square capacity: 360 mm - Rectangular capacity: 360 x 360 mm - Blade dimensions: 5250 x 41 x 1.3 mm Gedjuhca Eepfx Adtsil - Main motor power: 4 kW - Cutting speeds: 20 to 120 m/min - Machine dimensions: 1700 x 2000 x 2150 mm - Weight: 2600 kg EQUIPMENT - New advanced RÜSCH CNC control panel - Cutting speed variator - Hydraulic blade tensioning - Motorized chip removal brush - Coolant tank with pump - Chip conveyor - Oil mist unit for tube cutting

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Westphal Mechanik C7x Commutator Slotting Center Machine No.: M64127 Year of manufacture: 09/2019 The commutator slotting center performs four machining steps. During these steps, the following components are approached: - Contact slot saw - Insulating slot saw - Deburrer - Brush The Stäubli TS 80 robot with SP1 control is equipped with two grippers, which transfer the commutator to the individual stations. Software data: - Marking Builder2 (2D) - Marking Builder2 (3D) - Logo Designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC Further images via this link. Additional technical data will follow shortly. Complete plant closure. Large selection of mezzanine platforms, pallet racks, shelving racks, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools. Gjdpfxog H Inzs Adtsil You can find more items – new and used – in our shop! International shipping costs on request!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2019/72/23, diameter mata gergaji: 520 mm, ketinggian potong (maks.): 200 mm, kecepatan rotasi (maks.): 2.800 rpm, kecepatan rotasi (min.): 2.800 rpm, panjang pemotongan (maks.): 500 mm, jenis arus masuk: tiga fasa, lubang pisau gergaji: 50 mm, persyaratan ruang panjang: 8.800 mm, lebar yang dibutuhkan: 1.200 mm, hentian panjang: 8.800 mm, arus masuk: 16 A, I am selling a Graule ZS 200N and a Beck ESF 2 due to business closure. Mobile saw stand Beck ESF 2 with Graule ZS 200N Giedpswauafjfx Adtel Mobile saw stand; total length approx. 8,600 mm, suitable for G-ZS 170 and 200 saw The stand is mobile, equipped with 4 swivel casters (200 mm diameter), 2 of which have brakes The extension rails on the infeed and stop roller conveyors are fitted with foldable support legs; the saw stand is powder-coated in grey-white RAL 9002; Includes drawing holder; fitted with 5 crank supports for stable positioning during operation; with electrical distribution and triple 230 V socket Precision measuring system “Exakt A” on the left side, track length 5,200 mm, measuring range from 400 to 5,960 mm with digital LED display; the stop is fixed pneumatically – otherwise same as ESF 1 – measuring length incl. extension approx. 8,800 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1979, Raimann saw height: 90 mm, chain width: 250 mm, after overhaul. The machine has undergone a complete refurbishment. Motor: 22 kW. Cutting width: 250 mm. Shaft diameter: 80 mm. Main drive from the motor to the shaft via flat belt. Gsdsh Rv Eyjpfx Adteil

Kondisi: baru, description: - Crosscut and miter circular saw with a maximum cutting height of 170 mm - Saw adjustable for miter cuts on two planes - Robust cast iron construction - Precise ball bushing guide for the tool carriage on hardened and ground steel shafts - Manual saw feed Giedpfx Adjvwf N Tjtsl - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Adjustable end stops at 90° and 45° - Lower saw blade guard connectable to an extraction system delivery scope: 1 x Graule crosscut and miter circular saw type ZS 170 N including surcharge for 3 kW 400 Volt motor technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, 670 USED Seewer Rondo industrial line, model RONDOLINE, EXTENSIVE EQUIPMENT included: - calibrator, - filling unit, - sugar sprinkling unit, etc., - hard topping application, - double rolling with rollers, - guillotine, - many interchangeable cutting dies, Giedpfjpl Urtox Adtel - a wide variety of different rollers. The line comes with additional spare parts. Extensive additional accessories and equipment as seen in the photos. year of manufacture: 2001 EXTERNAL DIMENSIONS (in cm): - length: 1430 - width: 130 The machine is located in our warehouse (36-068 Bachórz) Paid options available: transport. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Kondisi: bekas, Tahun pembuatan: 1999, rondo-doge-rondolino-feingebaecklinie-1999 Godpoxvx Tfsfx Adteil

Kondisi: bekas, Tahun pembuatan: 1999, Rondo Doge Rondolino fine pastry line Gijdpfx Aju Huwvsdtol Year of manufacture: 1999 Total table length: 380 cm Belt width: 635 mm Cutting station Guillotine ZGM635.A Pictures BEFORE cleaning

Kondisi: baik (bekas), Groninger ZSK800 cap sorter, year of manufacture 2002. Includes 5 different format sets. Universally applicable, in very good condition! Giodpon Hqrcefx Adtjl

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Rak Besi untuk Ruang Ritel ✔ Gondola dan unit ujung gondola ✔ Rak dinding 🔹 Buatan Eropa – kualitas unggul 🔹 Berbagai model, ukuran, dan warna tersedia 🔹 Konsultasi dan perenderan ruang 3D sesuai permintaan 🔹 Transportasi dan instalasi disediakan Gijdpew S Ildofx Adtel HARGA BERVARIASI TERGANTUNG MODEL Harga fleksibel, dihitung per elemen (tinggi, kedalaman, jumlah rak). 📞 Hubungi kami untuk penawaran pribadi dan konsultasi gratis!