Beli Paging Oven bekas (4.697)

Tahun pembuatan: 2013, Kondisi: baru, Wood-fired oven with direct firing Ledpfx Aasygm Ushshr Baking surface: 1.0 x 0.7 x 0.25 m (L x W x H) 8 cm fireclay lining with integrated ash drop chute Baking chamber door folds downwards Available with fully automatic pellet firing upon request

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V Ljdpfx Aevz Hq Teahshr - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Tahun pembuatan: 2023, Kondisi: baru,

Tahun pembuatan: 2018, jam operasional: 200 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 908011821811131, Oven dibeli untuk annealing bagian aluminium, juga dapat digunakan untuk pelelehan cat bubuk. Peralatan sedikit digunakan, dengan kurang dari 200 jam kerja. Suhu maksimum yang dapat dicapai - 350℃ (suhu dapat disesuaikan sesuai kebutuhan). Ukuran: 2x2x2m. Perangkat ini dilengkapi dengan kolektor udara panas dan pembuangan melalui pipa ventilasi. Troli transportasi yang dirancang khusus untuk peralatan juga akan disertakan. Lhedpsx H Rxwofx Aahor

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 49 kW Working output: 45 kW Brand new in original packaging: Yes Warm air blower, flue gas fan, electronic control with digital display: included Intake air filter, recirculation intake filter: large-surface intake filter with no loss of performance / included Warm air ducting pipes: 2 x 200 mm with plug-in, freely rotatable 90° bends Flue outlet diameter: 180 mm Lhjdpjpn Nyzefx Aahsr Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air delivery: 3500 m³/h Intake air filter: Yes, large-surface intake filter with no loss of performance Power consumption: 550 W Designed for room volume: 1000 m³ Weight: 310 kg

Kondisi: Pembawa suku cadang rusak (bekas), Fungsionalitas: fungsi terbatas, dtf-offer-2024 Lsdpfox Ehggsx Aahjhr

Kondisi: siap digunakan (bekas), kapasitas angkut: 600 kg, Hindenlang TPESM-600 - Oven Induksi Suhu maksimum: 850° Lhsdpfex Enfljx Aaher Tegangan: 400 V

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h Lodsvz Hq Hspfx Aahshr - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), WIESHEU EUROMAT B5 / B10 VARIO BAKERY OVEN Year of manufacture: 2016–2017 Fully functional and in very good technical and visual condition. The set includes: EUROMAT B5 / B10 VARIO oven + 2 loading chambers. Baking sheets/trays – accessories included. Freight costs depend on weight, volume, and above all on distance. For inquiries, the following information is required: delivery address (postcode and town/city). Further details must be clarified by phone, so we kindly ask you to contact us by telephone regarding transport costs and delivery arrangements. Our contact details can be found under Legal Information of the seller. Payment in cash upon collection is possible. We sell and export worldwide. Thanks to our large storage capacity, we are able to supply even larger quantities flexibly and quickly. Please contact us before making a purchase. We issue intra-community invoices – excl. VAT. Lodpfx Aaox Ihr Rjhjhr Opening hours: Mon–Fri: 8:00–16:00

Kondisi: diremaj di bengkel (bekas), Rational scc202e, 63 kW, perangkat setelah pemeriksaan. Ljdpfow S Nwzsx Aahehr

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.440 mm, berat keseluruhan: 800 kg, lebar total: 1.000 mm, jenis arus masuk: tiga fasa, tinggi total: 2.142 mm, tegangan masuk: 400 V, Stikken oven Salva Metro K 15 Standard BARU Generasi terbaru dari seri oven Dengan teknologi COOL-Touch dan LOW-E Jejak kaki kecil dengan area pemanggangan 5,5 m² Hemat energi & mudah perawatan Kontrol standar Sistem Penghemat Energi ECO Termasuk 1 troli stainless steel Untuk loyang ukuran 600x400 mm Sambungan 400V, 24,5kW, steker CEE 32/-63A Dimensi: 1000 x 1440 x 2142 mm (LxPxT) Sambungan air: 3/4 inci Unit BARU Garansi 12 bulan + layanan suku cadang Manfaatkan pengalaman lebih dari 35 tahun! Opsi: Filter air Troli stainless steel tambahan Paket layanan Kontrak pemeliharaan Pengiriman & instalasi Instruksi penggunaan & commissioning Lsdsx Dyn Topfx Aahohr

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Dijual beberapa oven reflow Rehm dan oven pengering Rehm (pengering cat). Oven dalam kondisi baik, bersih, dan sepenuhnya berfungsi. 1 x Rehm VXP nitro 3850 (th. 2010) Tipe 834 (No. Proyek 2680) Lokasi: Buchenstraße 18 - 20 / 93426 Roding = €3.500 nego Selain itu kami tawarkan: Asys TRM 03 (th. 2012) Asys FPS (th. 2010) Siplace S 27 dan Siplace F 5 HM (th. 2006) Exra X6 HSP (th. 2008) digunakan sebagai donor suku cadang Knodel oven pengering (th. 2015) Nutek Coating Inverter (th. 2014) dan masih banyak lagi Silakan hubungi kami, kami dengan senang hati akan mengirimkan data dan foto lebih lanjut mengenai mesin yang kami miliki. Kami tutup untuk libur perusahaan dari 19.12.2025 hingga 06.01.2026. Mulai 07.01.2026 kami kembali melayani Anda. Lhodpfsw Srqqsx Aahsr

Kondisi: siap digunakan (bekas), kapasitas angkut: 600 kg, daya nominal: 69 kW (93,81 hp), Hindenlang TPESM-600 - Oven Induksi Jenis: Tungku Induksi Ljdpfx Aox Enffoahshr Suhu maksimum: 850° Tegangan: 400 V

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm Ljdpfx Aovz Hqysahohr - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), de-MiweEtagenbackofen1 Lodpsx Ivh Tofx Aahohr

Kondisi: bekas, Oven ruang resirkulasi listrik Nabertherm Lhsdpfxjxmhhao Aahjr Tipe: N 500 / 45 HA Aliran udara: horizontal Suhu: maks. 450°C Daya total: 28 kW Dimensi ruang (L x P x T): sekitar 790 x 1000 x 760 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025, panjang total: 1.150 mm, berat keseluruhan: 800 kg, lebar total: 1.320 mm, jenis arus masuk: tiga fasa, tinggi total: 2.100 mm, tegangan masuk: 400 V, masa garansi: 12 bulan, Oven lantai listrik Salva Modular Power Master Control Panel 4 lantai masing-masing dengan area pemanggangan 600 x 800 mm Panel kontrol hingga 100 program Rangka bawah dengan roda Oven kelas atas Hanya di tempat kami diuji DGUV V3 Koneksi 400V, steker CEE 16A Dimensi: 1320 x 1150 x 2100 mm (PxLxT) Oven BARU dengan garansi Lhjdpfsx Dyntjx Aahsr Kunjungi pameran besar kami!

Kondisi: baik (bekas), Houno Oven Kombinasi Oven stainless, kontrol layar sentuh, resep yang dapat diprogram dengan pengatur waktu dan kontrol suhu, tujuh baki, ukuran baki 530mm x 320mm, dengan unit uap Brita purity, dipasang di rak stainless, 3 fasa (3Ph) Lhodpfx Aaex Ebh Dohsr

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, used.rotary.oven.roto.passat.koenig Lhedjx Hx Tpepfx Aahor

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution. Lsdpfxevz Hqts Aahshr

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), 4771bda1-7bd8-4bd0-b5fa-19c9957db2db Lhedpfjx Ividjx Aahor

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% Lhsdpsvz Hqmofx Aahjr - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), stikkenofen-2024-06 Lhjdpfjx Ivikex Aahjr

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C Lhsdovz Hqgopfx Aaher - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm Lhodpfx Asvz Hhxeahjr - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.