Beli Pahat Pemegang bekas (434)

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Maximum pallet dimensions: 800 x 1,200 mm Maximum load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Individually frequency-controlled carriage speed up/down Acoustic signal at start of wrapping and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Anti-drop device for film carriage Push buttons for power on, start & stop function, and reset in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 – Display lock for program modification F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed up and down can be set independently F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13 – F16 – Film application tension for base & top wrap / ascent & descent can be set independently F62 – Ergonomic height for film replacement Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrap (up or down only) F01-3 – Push button for manual operation F10–F11 – Wrapping cycle with preset start and stop heights F12 – Wrapping to a stored height (with deactivation of height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for installation of edge protectors F30–F31 – Reinforced wrapping cycle with adjustable wrap count Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motor drive string formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS” motor-driven pre-stretch system 200%. Optionally with easy-change gear set 150%–200%–250% Film specification: Max. outer diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power consumption: 1.2 kW / 6A Options available: FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio fixed at 200% Lrodpfx Agsv Iqyrjleg Turntable sizes up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for black products Cutting device etc. Further units available ex-stock Ludwigsburg. Images may show optional equipment subject to surcharge.

Tahun pembuatan: 2022, jam operasional: 2 h, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S22EVA_03, Exhibition machine – like new. EVA Rotary table / Raised base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm 150 mm - 200 mm raised base frame, adjustable for loading with electric pallet truck Ledswtc Anspfx Aglorg Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Beep signal at start of wrapping and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Drop safety system for the film carriage Pushbuttons for machine power on, and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of lower wraps (1 – 10 wraps) F06 – Number of upper wraps (1 – 10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01-1 – Cross-wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a preset height (disabling the photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start function to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on the film carriage Film specifications: Max. external diameter Ø 250 mm – Core Ø 76 mm – Height 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total rated output: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23Synthesi01,

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S Lrodpewtc Epofx Agljg with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S25MARATHON01, Semi-automatic manual stretch film wrapper MARATHON TECHNICAL DETAILS The world’s only "PATENTED" non-electric, mobile stretch wrapper capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight, and size It is recommended to use pre-stretched film with a maximum roll diameter of Ø 230 mm Minimum load size: 650 x 400 mm Minimum load weight: 50 kg Wrapping height (including pallet): 2000 mm Simple operation, without requiring motor power Manual movement by the operator The film carriage is moved up and down manually The machine features simplified operations Lrjdswtc A Uspfx Aglog Replaces hand wrapping MANUAL WRAPPING OPTIONS The operator acts as the motor, wrapping upwards and downwards as needed TYPE "FM" FILM CARRIAGE WITH MECHANICAL BRAKE With manually adjustable brake roller on the film carriage Film specification: max. external diameter Ø 230 mm – core Ø 76 mm – height = 500 mm Optional: stretch film with core Ø 50 mm or coreless Additional units available from stock in Ludwigsburg.

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS04, Exhibition unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120-400% Lrodpfxswtc Drj Agleg Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film tension electronically controlled via control unit IEF quick-change system for easy film roll replacement Film specification: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, pallet included): 2,150 mm Height detection via light sensor or manual input on display Protective bar for emergency stop of drive system Emergency stop switch according to CE regulations Acoustic warning signal and beacon on machine start-up Anti-drop device for film carriage Push buttons for start & stop Machine operation in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All operating parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet, up to 80 m/min - Film carriage speed up and down infinitely adjustable - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of bottom wraps (1 - 10 turns) - Number of top wraps (1 - 10 turns) - Pallet wrapping height setting - Film tension for bottom & top wraps / ascent & descent separable - Film pre-stretch for bottom & top wraps / ascent & descent separable - Ergonomic height for film replacement PROGRAMMABLE WRAPPING CYCLES VIA PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (upwards only or downwards only) - Wrapping cycle with predefined start and stop height - Wrapping to a preset height (disables light sensor height control) - Wrapping cycle for large dimension pallets - Wrapping cycle for top sheet application - Soft start cycle for corner protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Further units available immediately from Ludwigsburg stock.

Kondisi: bekas, Details on request Lrjdpfx Agsb E Evmslsg

Kondisi: baik (bekas),

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, translation-001 Lrodjvb Tz Espfx Agljg

Kondisi: siap digunakan (bekas), Diameter meja putar: 1650 mm, tinggi meja putar: 65 mm, tinggi tiang: 2560 mm, kapasitas maksimum: 2000 kg, dimensi palet maksimum X/Y/Z: sekitar 1200 mm/1100 mm/2400 mm. Dimensi mesin X/Y/Z: sekitar 2600 mm/1650 mm/2600 mm, berat: sekitar 550 kg. Dokumentasi tersedia. Inspeksi di lokasi memungkinkan. Lrsdow R Uz Aspfx Aglsg

Tahun pembuatan: 2025, Kondisi: baru, MANUAL STRETCH WRAPPER THE LATEST UNBELIEVABLE INNOVATIVE IDEA FROM ITALDIBIPACK – TWO SYSTEMS, THREE SYSTEMS IN ONE JOLLY WORK LIFTER & STRETCH WRAPPER Thanks to the 'TRANSFORMER'® device, the lifter and the assistant for pallet stacking, Jolly Work, can be instantly converted into a stretch wrapper without the need to attach or remove any parts. JOLLY WORK – SAVE TIME, MONEY, PERFORMANCE, AND HEALTH! Fortunately, JOLLY has arrived… In terms of occupational health and safety, manual lifting of heavy objects and manual stretch wrapping involves significant health risks. Lsdpfx Ajmv Eixeglorg Jolly Work increases productivity and work profitability, delivering improved results: it assists and enables stretch film wrapping of taller loads and, in the lifting mode, is a great help during load preparation. TECHNICAL DATA Machine dimensions (L x W x H): 640 x 760 x 1950 mm Weight: 45 kg (including batteries) Battery operation: 24 V DC (2 x 12 V 9 Ah batteries) Plug-in charger power supply: 220 V / 1 Ph / 6 A Motor drive system: 24 V DC Up/down speed: adjustable Max. wrapping height: 2150 mm Suitable film: PE/pre-stretched TECHNICAL SPECIFICATIONS IN LIFTING MODE (optional) Platform dimensions: 500 x 450 mm Max. lifting weight: up to 50 kg in decreasing steps Max. lifting height: 1500 mm / 50 kg Lifting platform material: aluminium/wood TECHNICAL SPECIFICATIONS IN STRETCH WRAPPER MODE Standard film 23 micron / Pre-stretched film with 9-10-12-15 µm thickness Outer film reel diameter: 105 mm Stretch film roll height: 440/450/500 mm Maximum core holder height: 460 mm / 520 mm (for 500 mm film) Inner core Ø: 50 mm Adjustable film feed speed Stretch film tension adjustment via mechanical brake Quick-release system with preset brake level

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic orbital stretch wrapper SPINNER 1800s + BN Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - Right-hand side in feed direction General technical data: - Main motor power: 3 kW - Max. ring speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 2,600 kg Standard equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed Lrjdefzrmfepfx Aglsg - Adjustable stretch tension with mechanical brake device - Automatic stretch film clamping and cutting system - Pneumatic front and rear clamps to fix the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touch screen to adjust machine parameters according to product requirements - Operator safety systems Optional equipment: - Various types of conveyors - Infeed and outfeed rollers - Bubble wrap unit (included in this offer) Technical specifications: Wrapping dimensions: - Max. length: unlimited - Min. length (WxHxL): 600 x 450 x 1,200 mm Conveyor functions: - Usable length: 2,680 mm - Total length: 2,910 mm - Working height: 950 mm - Electric motor power: 0.55 kW - Max. speed: 12 m/min - Max. loading capacity: 100 kg/m Stretch film properties: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron Bubble wrap unit: - Max. film width: 2,000 mm - Max. film roll diameter: 650 mm - Core diameter: 20 ~ 76 mm - Suitable films: PW film, PE bubble wrap, PVC film, PE foam film - Cutting & sealing system: Operating temperature: 50 °C ~ 150 °C

Kondisi: bekas, Coil width: 1600 mm Outer coil diameter: 1550 mm Space requirement approx.: 2.0 x 0.55 x 1.65 m Coil hook, coil turner for lifting, turning, and transporting coils a cost-effective lifting device Lifting device for crane operation Ljdscxxn Dopfx Agljrg Pipe sections, wire, cable bundles, or ring-shaped loads such as coils can be transported easily and safely using coil hooks.

Kondisi: bekas, Tool holder interface type: HSK-A 100 Tool mounting type: Wohlhaupter Tool mounting type: Fine boring heads / Precision turning Large selection of Wohlhaupter HSK-A 100 tool holders, boring heads, adapters, and extensions available. Parts list with prices available on request. Lredpfx Agjg Nqlieljg

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp, 500 mm long Manual roping device mounted on the frame at the pallet for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm Lredpfxjv Iqucj Agleg · Max. load capacity: 1200 kg · One ramp included Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop switch as per CE regulations Turntable always stops at initial home position Fall protection for film carriage Pushbuttons for machine power-on, as well as start & stop function & reset, Ø 22 mm, according to CE standards ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program changes F02 - Continuously variable turntable speed 5–12 rpm Carriage speed independently adjustable for up/down F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Photocell delay for wrapping height F13–F16 - Film application tension for base/top wrap and up/down direction, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) PROGRAMMABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (up/down) F01 - 2 - Simple wrapping (up only or down only) F01 - 3 - Pushbutton for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio preset to 200% Film application tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm; height = 500 mm; core Ø76 mm Standard power supply: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Further machines available ex-stock Ludwigsburg.

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23SynthesiLow05, Demo machine, as new. Lrodpfxjv Iqt Es Aglog SYNTHESI with flat turntable Turntable height 25 mm Short ramp 500 mm long TECHNICAL DETAILS: LOW PROFILE Turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage lift speed upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power, start & stop, and reset in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be adjusted independently F03 - Carriage lift speed upwards from 1.3 to 5.4 m/min F04 - Carriage lift speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Delay of photocell for wrap height F13–F16 - Film application tension base & top wrapping / ascent & descent individually adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (photocell height sensing disabled) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start function to reduce film tears on sharp pallet edges Wrapping cycle with manual or powered rope-threading (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch set to 200% Film application tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection: 230V – 1Ph+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Additional machines available from stock in Ludwigsburg.

Tahun pembuatan: 2024, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Lodsv Iqwdepfx Agljrg Total connected load: 1.2 kW / 6A Further units available from stock immediately.

Kondisi: diremajakan ulang (bekas), Good day, We are offering retrofitted ER-093996 Square 15 Holders C from Erowa. Lredpjwa I Hrefx Agljg The holders have been converted from the older version ER-007986, which had no gripper grooves or sealing plate. We have completely disassembled, blasted, cleaned, and realigned these holders. You are also welcome to send us your own holders for conversion or overhaul. If you have any questions or require technical assistance, we are happy to help.

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, en_001 Lredpstr Ut Iefx Agljg

Kondisi: baru, Tahun pembuatan: 2024, The PROFI machine – offering the best international price–performance ratio! Ergonomic operation with a clear view of the cutting edge at all times! Direct from the renowned Swiss manufacturer. The original from BERGER technologie, known for over 40 years for their extremely robust and exceptionally durable DRILL BIT GRINDERS MADE IN SWITZERLAND! WTG-1 Profi Mortise Chisel and Planer Knife Grinding Machine Description: For precise and efficient work, a perfectly ground, razor-sharp cutting edge is essential. With our grinding machine you can sharpen your tools quickly, easily, accurately, and cost-effectively. Grind mortise chisels, planer blades, carving tools, and gouges. Your advantages: - Highly precise, stable, and durable construction - Quickly produces a perfect, burr-free edge in just 30 seconds - Extremely user-friendly, suitable even for trainees and unskilled workers - Dry grinding principle – no problems with moisture (water or oil) - Continuously variable adjustment of bevel angle - Reduced requirement for new tools, lowering maintenance and fixed costs Manufactured in SWITZERLAND = Swiss Quality Applications of the WTG: Anywhere traditional woodworking is carried out, for example: in joineries, carpentries, timber construction companies, schools, vocational schools, and training workshops. Construction features: The WTG is powered by a high-performance 500-watt motor. The carriage runs on a dust-protected, high precision, ball-bearing linear rail guide, as used in thousands of machine tools, industrial robots, and special precision machinery. The infinitely variable grinding advance is achieved via an accurate and self-locking dovetail slide. Tools are clamped securely and stably with a parallel clamping system. Our WTG grinding machine offers an unmatched price–performance ratio. See for yourself or let us advise you. Lredpfx Ajbxudkeglsg Technical data: Weight: approx. 24 kg; Dimensions: approx. 55 x 35 x 30 cm; Power supply: 230 volts, plug type J; Motor: 550 watts; Speed: approx. 3,000 rpm. Sharpenable tool width: 5–60 mm; Bevel angle: stepless adjustment from 25–30° Main grinding wheel: special corundum Ø 100 mm; Polishing/buffing wheel: special ROTAX type Ø 150 mm. Additional accessories available on request. Sales price: EUR 2,225.00 excl. shipping A different perspective: A high-quality chisel, for example, with a width of 28 mm and a usable blade length of approx. 120 mm, costs on average CHF 50.00. With our WTG (Wood Tool Grinder), you can perfectly and burr-free sharpen such a chisel in approx. 30 seconds, on average up to 200 times per tool, assuming normal wear to the edge. This means both the machine and hand tools quickly pay for themselves. Above all, the high recurring variable costs for tool and grinding work each year are minimized. Once you own a WTG machine, you always work with perfectly sharpened tools, which also significantly boosts both quality and productivity. You benefit in several ways... Remarks If you sharpen a mortise chisel or a hand planer blade by hand or with a

Kondisi: baru, Tahun pembuatan: 2025, The PROFI machine with the best international price-performance ratio! Ergonomic operation with a clear view of the cutting edge at all times! Direct from the renowned Swiss manufacturer of precision sharpening machines: BERGER technologie, THUN/Gwatt BE Sharpening of woodworking tools The #PROFI chisel and planer blade grinding machine! The original from BERGER technologie – for over 40 years known for its extremely robust and highly durable drill grinding machines MADE IN SWITZERLAND! Over 40 years of experience in tool grinding speaks for itself… #WOOD-TOOL-GRINDER WTG-1 – «Swiss Quality» Currently the most affordable PROFESSIONAL wood tool grinding machine on the market! For precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder, you can sharpen your tools such as: «#Chisels, planer blades, mortise chisels» quickly, easily, precisely, and cost-effectively… Lrjdpfx Agedt Ap Aslog Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Anywhere conventional woodworking takes place. - For example, in joineries, carpentry workshops, - Timber construction, schools, vocational schools, - Training centers / apprentice workshops… Your benefits - Highly precise, robust, and durable construction - Fast: a perfect burr-free edge in just 30 seconds - Extremely easy to operate, even for trainees and unskilled personnel - Dry grinding principle, i.e., no issues with moisture (water/oil) - Continuously adjustable cutting angle - Reduced need to purchase new tools, thereby lowering maintenance and fixed costs Construction of the «WTG-1» wood tool grinder The WTG is powered by a high-performance 500-watt motor. A dust-protected, high-precision, ball-bearing linear guide – as used thousands of times in machine tools, industrial robots, and precision special machines – serves as the carriage. The stepless grinding infeed is achieved by an accurate and self-locking dovetail mechanism. Tool clamping is secure and stable via a parallel clamping system. Technical Data Weight: 20 kg Power supply: 230 Volt Motor: 500 Watt Speed: 3000 rpm Sharpenable tool width: 5 – 60 mm Cutting angle adjustment: 25 – 30° continuously Main grinding wheel: Special corundum Ø 100 mm Polishing/buffing wheel: Special type ROTAX Ø 150 mm My tip: I recommend the basic machine and the double grinding set. That will equip you perfectly. Request documentation for the machine with no obligation. Your direct contact: Mr. Marc Brönnimann / Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Kondisi: bekas, Various tool holders from brands such as Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 shank. Only available for sale per pallet. Pallet 5: EUR 2,730 total - 3x driven tool VDI 40: EUR 580 each - 11x tool holder VDI 40: EUR 90 each Pallet 6: EUR 2,640 total - 3x driven tool VDI 40: EUR 580 each - 10x tool holder VDI 40: EUR 90 each Pallet 7: EUR 2,640 total - 3x driven tool VDI 40: EUR 580 each - 10x tool holder VDI 40: EUR 90 each Lodpfx Agsvry T Njljrg Pallet 8: EUR 2,730 total - 3x driven tool VDI 40: EUR 580 each - 11x tool holder VDI 40: EUR 90 each

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Ulma Superchik Stretch Wrapper 2 Stück verfügbar, Baujahr 1996 und 1997 Lsdpfx Aswnx Amsglerg Regelmäßig gewartet und vom Vorbesitzer gut instand gehalten

Kondisi: baru, Automatische Zapfenschneidmaschine mit 3 Köpfen Arbeitstischabmessungen: 3000 x 300 mm Gusseiserne Konstruktion für maximale Steifigkeit 3 x vertikale hydraulische Werkstückspannungen 3 x horizontale hydraulische Werkstückspannungen Vorschubgeschwindigkeit hydraulisch einstellbar Automatischer Betrieb 3 Zapfenschneidköpfe Manuelle Positionierung in X-Achse mit mechanischen Verriegelungen Mechanische Siko-Anzeigen für die Höhenposition – Z-Achse Doppelt exzentrischer Betrieb der Zapfenschneidköpfe (patentiertes Design) Lredpfx Agsn Nv Txelog Motorleistung: 3 PS Drehzahl: 2800 U/min Max. Abstand zwischen den beiden äußeren Zapfenschneidköpfen: 2800 mm Min. Abstand zwischen den beiden äußeren Köpfen: 180 mm (Mitte zu Mitte des Zapfens) Absaugstutzen: 100 mm Hydraulikpumpenmotor: 10 PS

Kondisi: baru, Centauro BETA 3-Achs CNC-Schwenkmeißel-Stemmmaschine Neue, vollständig programmierbare 3-Achs-CNC-Schwenkmeißel-Stemmmaschine, geeignet für allgemeine Tischlerarbeiten und die Möbelproduktion. Durch die Kombination des automatischen Vorschubs des Stemmaggregats in der X-Achse und eines automatischen Greifers zur Positionierung des Werkstücks entfällt jegliche manuelle Bewegung oder Handhabung des Werkstücks – abgesehen vom Einlegen und Positionieren des Holzes am pneumatischen Anschlag sowie dem Entladen nach Abschluss des Stemmzyklus. Der gesamte Bewegungs-, Spann- und Stemmprozess erfolgt vollautomatisch. Die Bewegungen in X-, Y- und Z-Richtung erfolgen über Kugelgewindetriebe mit Linearführungen für maximale Positioniergenauigkeit. Dank der programmierbaren Z-Achse können versetzte Zapfenlöcher, Doppelzapfenlöcher oder breitere Zapfenlöcher mit demselben Meißel ausgeführt werden. Die Programmierung erfolgt intuitiv über den benutzerfreundlichen grafischen Touchscreen-Controller, bei dem Programme unter einer Nummer oder einem spezifischen Namen (bis zu 8 Zeichen) gespeichert werden können. Das Schwenkmeißelaggregat erzielt sehr saubere Zapfenlöcher; bei Bedarf können für tiefe Zapfenlöcher bis zu 3 Schnitttiefen eingestellt werden, was einen 'Woodpecker'-Arbeitsmodus ermöglicht. Weitere Programmieroptionen sind das Bearbeiten wahlweise von der Werkstückkante oder -stärke sowie das Herstellen von Spiegelteilen (links/rechts) in einem Arbeitsgang. Auf Wunsch kann die Maschine mit einem separaten, programmierbaren Hohlmeißelkopf zur Herstellung kleiner Zapfenlöcher für Sprossen ausgestattet werden. Alternativ ist ein horizontaler Fräskopf verfügbar, etwa zum Ausfräsen von Bandtaschen, zur Schlitzung von Lamellentüren etc. X-Achse: 1100 mm Verfahrweg Lodpfxjb Tmpqs Agljrg Y-Achse: 250 mm Verfahrweg, max. Stemm-/Schnitttiefe 120 mm (je nach Meißelgröße) Z-Achse: 100 mm Verfahrweg, max. Werkstückhöhe 120 mm Alle Achsen mit Kugelumlaufspindel und bürstenlosem Motor Max. Werkstückbreite: 200 mm (größer auf Anfrage) Max. Schwenkmeißelstärke: 20 mm Mindest-Schlitzlänge: ca. 25 mm (mit Schwenkmeißel) Mindest-Schlitzbreite: 6 mm 3 vertikale pneumatische Spannzylinder 3 horizontale pneumatische Spannzylinder 4 PS Hauptmotor 'Power 1000' grafischer Touchscreen-Controller, 99 Programme à 50 Zeilen, USB-Anschluss Programmierbare Schnittgeschwindigkeit für Stemm-/Schnitttiefe Ausreißschutz mit Luftdüsen und Absaugstutzen: 1 x Ø80 mm, 1 x Ø60 mm Arbeitstischmaße: 1210 x 215 mm Installierte Leistung: 3,6 kW (Standardmaschine) Druckluftversorgung: 6 bar / 470 l/min Verbrauch