Beli Pembakaran Tabel bekas (825)

Kondisi: bekas, Chroma Type: ATE 17020 The Chroma 17020 is a high-performance, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing - BMS verification - Validation of complex charging cycles High energy recovery – up to 85% efficiency Flexible expansion through multiple channels or higher current ranges Enterprise-grade use due to comprehensive safety features & data persistence Technical Data – Chroma ATE 17020 PTS Feature | Specification -----|----- Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel power: 600 W to 60 kW (modular and scalable) Total power: Up to 600 kW (depending on configuration) Voltage ranges: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher currents up to 2600 A Current and voltage accuracy: ±(0.05 % of measured value + 0.05 % of range) Power accuracy: ±0.1 % Transition time (charge/discharge): < 50 ms Kodpfx Adjwwrxaewond Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data recording: Cyclic, 10 μs – 1 s / buffer for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy feedback capability: Yes – up to 85% efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recovery Temperature monitoring: Optionally integrable, range 0–90 °C ±2 °C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Fields of application: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data, specifications may be subject to change!) If you have further questions, we are happy to answer your call.

Tahun pembuatan: 2002, Kondisi: perlu perbaikan (bekas), Oven putar Wachtel Comet - bekas - tahun pembuatan 2002 - listrik Kedpfexx Tx Uox Adwond - daya 90 kW - untuk loyang 58 x 98 - oven dari produksi, perlu diperiksa/diperbaiki - dirakit sepenuhnya - kontrol elektronik - tanpa troli - pengambilan di gudang/opsi pengiriman - harga berdasarkan permintaan

Kondisi: baru, Stretch film wrapping machine Knjdpfx Aed A Udnodwjd Continuously variable rotation speed. Table diameter customizable to customer requirements. Manual or automatic film dispensing. Various holders/accessories available for a wide range of applications.

Kondisi: bekas, Size: 3,000 mm x 1,200 mm - without stops Knjdpfxed Hwwue Adwjd - without hydraulic ram

Kondisi: perlu perbaikan (bekas), Fungsionalitas: belum diuji, Kami menjual tiga dari ketel pembakaran kami karena pembelian baru. Informasi lebih lanjut dan foto tersedia atas permintaan. Dapat dibeli secara terpisah. Inspeksi di lokasi dimungkinkan. Kjdpfx Adjxnxb Tewend

Kondisi: baru, Table diameter 300 mm Table load 50 kg Swivel range 90 degrees Rotation speed 1 - 12 rpm, stepless Table load 50 kg (vertical) Total power requirement 0.22 kW Machine weight approx. 0.036 t Space requirement approx. 0.45 x 0.43 x 0.38 m Welding positioner with - Foot switch - Manually tiltable/swiveling - Stepless adjustable speed - 250 ampere welding current transmission Demonstration machine. Documentation available in English only. Ksdpjfv Aztsfx Adwond

Tahun pembuatan: 2023, Kondisi: hampir baru (bekas), Thermo Fisher Model: ARL easySpark Metal Analyzer Tabletop spectrometer with PC, monitor & software Thermo Scientific OXSAS 2.7 software OXSAS is the most advanced software for optical emission spectrometers. - Current analyses are displayed using tab sheets - Immediate processing of data sets with Fill-Down and Increment-Down tools - OXSAS is a multiprocess application with impressive capabilities and potential - The comprehensive functionality of OXSAS enables you to meet all your requirements Technical machine specifications: Condition: Fully operational Like new condition Year of manufacture: 02/2023 System technical description: The ARL easySpark metal analyzer is designed to meet the challenges and demands of small to medium-sized plants and laboratories in the metal industry, requiring high-quality but cost-effective OES analysis for manufacturing parts for the automotive, aerospace, consumer goods sector, and other industries. The device is distinguished by exceptionally high resolution owing to a unique multi-grating/CCD (charge-coupled device) optical system. Further advantages of the Thermo Scientific ARL easySpark analyzer include: - The ability to accurately analyze all elements, from trace levels to percent concentrations, in any metallic solid samples - Groundbreaking spark excitation and optical design ensuring best-in-class performance - Intuitive, user-friendly Thermo Scientific OXSAS analysis software for rapid learning and simple routine operation - Rugged and reliable design requiring minimal maintenance - Compliance with safety and quality guidelines - A straightforward design suitable for both new production users and experienced laboratory personnel Ksdpfx Aov Hbvbedwjnd The instrument is also ideal for applications such as metal recycling, academic and non-academic laboratories, as well as primary metal producers who require a cost-effective solution for the analysis of metal products and materials for quality assurance and process control, or as a secondary instrument. Power supply: 110–230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: approx. L x H x D 0.80m x 0.45m x 0.70m Weight: approx. 80 kg Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change or errors.!) For further questions, feel free to contact us by phone.

Tahun pembuatan: 2001, Kondisi: diremaj di bengkel (bekas), Oven rotary Miwe Jumbo - bekas - tahun produksi 2001 - untuk 2 troli 60 x 80 - kontrol elektronik CS - burner gas atau minyak Kedexwbxajpfx Adwjnd - tudung dengan kipas - setelah renovasi - pengambilan dari gudang / opsi pengiriman - harga atas permintaan

Kondisi: baik (bekas), accumulation_table_recently_removed_from_honey_jar_filling_line Knedpfx Adsu Indrswed

Kondisi: baik (bekas), Tahun pembuatan: 2004, Tungku laboratorium tipe rol untuk pembakaran keramik, gres porselen. Tungku merek Spanyol TAI - TECNOLOGIAS APLICADAS A LA INDUSTRIA. Panjang tungku: 10 meter. Knjdsxu Nz Depfx Adwed

Kondisi: bekas, Tahun pembuatan: 1988, Heidenhain 355 control SK50 spindle taper Machine weight approx. 8 t Knsdpfof Tdvbjx Adwed +++++ Please note that the machine is currently dismantled and ready for loading. For this reason, it is not possible to demonstrate the machine under power or to produce a video. Additionally, our listing already includes the most informative photos of the highest possible quality. Unfortunately, it is not possible to provide further images. +++++

Kondisi: baru, Table length 400 mm Table width 400 mm Table load capacity 0.2 t Table diameter 400 mm Swivel range 90 degrees Rotational speed 0.2 – 2 rpm, steplessly adjustable Table load capacity 100 kg (vertical) Total power requirement 220 kW Machine weight approx. 0.065 t Space requirement approx. 0.56 x 0.42 x 0.46 m Welding positioner equipped with: - Foot switch - Manual tilting/swivelling Knjdpfxefv Azzs Adwsd - Stepless speed adjustment - 400 ampere welding current transmission Demonstration machine, documentation only available in English.

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 24.259 h, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 7633193000003100, daya: 216 kW (293,68 hp), berat keseluruhan: 4.500 kg, lebar total: 1.900 mm, panjang total: 6.000 mm, tinggi total: 1.700 mm, jenis arus masuk: tiga fasa, tekanan: 6 batang, tinggi kabinet kontrol: 1.600 mm, panjang kabinet kontrol: 400 mm, lebar kabinet kontrol: 1.000 mm, suhu: 100 °C, tekanan kerja: 6 batang, Perlengkapan: Pelat tipe tersedia, air panas, en-GB Kedpfsxvb Tbex Adwend

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Meja perakitan bekas yang ringan dari Ruchser. Kami menggunakannya untuk merakit jendela dan pintu Schüco. Kami menjualnya karena produksi kami telah dihentikan. Knsdew Nyk Tjpfx Adwed

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, I am selling the window manufacturing table OMGA BA825 (+A+U). Year of manufacture: 2012. Complete package. In very good condition. Available immediately. Knjdpfxet Ndz Uj Adwed

Kondisi: diremaj di bengkel (bekas), Tungku rol untuk pembakaran keramik gres porselen, panjang 18 meter. Tungku telah direnovasi, sistem kontrol seluruhnya baru. Kodpfxoxu Ny Hs Adwond

Tahun pembuatan: 2022, jam operasional: 500 h, Kondisi: sangat baik (bekas), Flare beserta sistem penyalaan dijual dari pabrik hidrogen SMR. Knsdpfx Aext Dyrsdwjd

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Meja Geser dan Posisi (terpasang/pernah terpasang pada mesin bor MAXION 50 mm) Lebar x Dalam sekitar: 1400 x 700 mm Luas bidang penjepit: 1200 x 600 mm Knsdpfx Adjxr Rc Rowed Gerak geser memanjang: 600 mm . 3 alur T, jarak: 150 mm Posisi manual / rasterisasi pada lubang posisi .

Kondisi: baru, Tahun pembuatan: 2024, Variable adjustable paint rotary table • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms • Height adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Kjdpfxobzmage Adwsnd Top quality Can be shipped by UPS by us. Requires assembly upon delivery. Location: ex stock Bitburg

Tahun pembuatan: 2021, Kondisi: baru, NIVEAU - Scissor Lift Table HS 300 midi Description: > Mobile scissor lift table with a platform base frame and 4 holes for inserting locking pins; 4 swivel castors, 2 of which are equipped with brakes; wheel diameter 125 mm; operated via foot pump. Load capacity in kg: 300 Weight in kg: 85 Useful lift in mm: 610 Building height in mm: 400 Total height in mm: 1010 Platform size in mm: 1200 x 740 Included! SwivelMax - Platform tilt frame with 2-position lock (vertical/horizontal) for panel weights up to approx. 120 kg. The tilt frame can be mounted onto the platform base frame of the HS 300 midi in just a few steps. Thanks to this accessory, even large-format panels can be swiveled from vertical to horizontal position by one person without effort. Tilt frame size: 1800 x 1480 mm Knjdpfjb Irfcsx Adwed Further optional accessories available: * Worktop made of 30 mm thick beech multiplex * Perforated grid plate made of 30 mm thick beech multiplex

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, en001 Knedpfxetltr No Adwsd

Kondisi: seperti baru (mesin pameran), 600 kg load capacity height-adjustable welding positioner with plate diameter 1000 mm height min. 0.65 m, max. 1.53 m rotation speed from 0.01 – 1.1 rpm tilt angle up to 135° hand and foot remote control with speed display very robust construction Knodpjd D D Hlefx Adwjd

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1.” YOUR ADVANTAGES - Accessible from all 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Stepped longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped air guidance to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Ksdpjdqzhbjfx Adwjnd Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at the nozzle with 22 m/s: 1,000 Pa at DN140mm / 700 Pa at DN160mm Adjustable working height: 735 – 1,015 mm Working surface (WxL): 946 x 1,500 mm Dimensions (WxL): 1,000 x 1,600 mm Weight: approx. 73 kg

Kondisi: baik (bekas), Welding positioner KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless via geared crank motor 0–90° Speed: 0.3–2.5 rpm Includes foot remote control Optional at extra charge: Quick-change chuck Diameter 300 mm, €450.- Ksdpfob Dymhjx Adwjnd

Kondisi: baru, Tahun pembuatan: 2024, Variable adjustable paint-turning table • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with fixed outriggers and adjustable pivot arms • Height adjustable Knjdsbzmafopfx Adwod Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Location: Ex-stock Bitburg Top quality at a top price Can be shipped by UPS – assembly required on delivery.