Beli Pengawetan Injector bekas (225)

Kondisi: sangat baik (bekas), Henkel UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 Curing Chamber (LOCTITE 97039) is a flood lamp curing system developed for curing light-curing adhesives using UVA rays and visible light. It is suitable for both manual curing of individual parts during production processes and for laboratory use. The device is equipped with: - Control unit with integrated main switch and operating hours counter - Lamp housing with UV lamp burner - Reflector - Ignition unit - Supplied in a UV safety enclosure Features: - Equipped with a 400 W metal halide lamp - Optimized for UVA light output - Typical curing area: 10 x 19 cm - Expected UV lamp service life: up to 1000 hours - Power supply can be detached and operated separately from the lamp module - Adjustable lamp height for optimal exposure - Glass filter prevents emission of short-wave UVB/UVC Technical Data: Fpsdpfx Adjtv H A Tjqon - Power supply: 230 V AC ± 4%, 50 Hz - Power consumption: approx. 460 W - Power fuse: 2 x 5 A, slow-blow - Glass cartridge fuse: 5 x 20 mm - UV lamp warm-up time: 3 minutes - Lamp type: 400 W high-pressure metal vapor lamp with double-ended socket - Lamp lifespan: approx. 1000 hours - Intensity: See section 5.1 - Dimensions (W x H x D): 220 mm x 472 mm x 300 mm - Ambient/operating temperature: +10°C to +30°C - Storage temperature: -10°C to +60°C - Weight: ~11.5 kg Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, please contact us by phone.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Krauss Maffei KM 180 – 750 AX Injection Moulding Machine Fully electric machine Year of manufacture: 2010 MC5 control system with colour monitor, integrated control panel, and built-in disk drive. Plasticizing unit Complete plasticizing unit for thermoplastics with 50 mm screw diameter TECHNICAL SPECIFICATIONS Clamping Unit - Clamping force: 1,760 kN - Platen dimensions (H x V): 790 x 740 mm - Distance between tie bars (H x V): 560 x 510 mm - Max. mould opening stroke: 450 mm - Min./max. mould height: 200/600 mm - Platen opening stroke: 1,050 mm - Ejector stroke: 130 mm - Ejector force: 49 kN Injection Unit - Screw diameter: 50 mm - L/D ratio: 20.2 - Injection pressure: 1,892 bar - Injection volume: 393 cm³ - Shot weight for PS: 357 g - Injection rate: 314 cm³/s - Max. screw speed: 320 rpm - Nozzle contact force: 29.4 kN Electrical Parameters - Connected load: 38 kW - Heater power: 15.6 kW - Number of barrel heating zones: 5 - Dry cycle time according to Euromap 6: 1/h 2,000 - Dry cycle time according to Euromap 6: 1.8 s Fedpfsn Atndjx Adqopn Weight and Dimensions - Net weight with control cabinet: 6.5 t - Machine dimensions (L x W x H): 6.07 x 1.92 x 2.01 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Injektor daging dari baja tahan karat dengan sabuk jala Produsen: Fomaco A/S, Denmark Model: FGM 88 SC Nomor mesin: 10354-2006 Tahun produksi: 2006 Daya listrik: 3×400 V / 50 Hz Konsumsi arus: 29 A Fpsdpfxsw D Hz No Adqon Perlindungan (sekring maksimum): 63 A Tekanan udara kerja: 6 bar Jumlah jarum: 88 Jenis sabuk: sabuk jala plastik Lebar sabuk: 720 mm Dimensi keseluruhan: 2300 mm (p) × 1150 mm (l) × 2240 mm (t)

Kondisi: baik (bekas), Tahun pembuatan: 2011, de-Metalbud Nowicki MH-75 SAS Mehrnadel-Injektor Metalbud Nowicki bietet eine Reihe von Injektoren mit SAS SYSTEM an. Fpedpjw Eb S Esfx Adqon Für eine optimale Kontrolle des Injektionsprozesses. SAS SYSTEM Fleischinjektoren sind für die Durchführung anspruchsvollster Injektionsverfahren konzipiert. Der Metalbud Nowicki MH-75 SAS Mehrnadel-Injektor eignet sich für Fleischmuskelstücke und Teilstücke von rotem Fleisch mit oder ohne Knochen, Geflügel sowie Teile von weißem Fleisch mit oder ohne Knochen. Vorteile des SAS SYSTEMS: - Hohe Wiederholgenauigkeit während des gesamten Arbeitsprozesses - Niedrige Injektionsraten ab 10% sowie hohe Injektionsraten bis zu 120%, geringe Abweichungen des Injektionsniveaus von 0,5 bis 2%, hohe Produktionsleistungen in kg/h - Maximale Injektionsgeschwindigkeit bis zu 60 Zyklen pro Minute - Injektion von Frischfleisch mit unterschiedlichen Stärken ohne Austreten von Lake - Ermöglicht die Programmierung des Injektionszeitpunkts, d.h. die Festlegung der zu injizierenden Fleischschicht; dabei ist der Antrieb des Transportbands mit dem Antrieb des Injektionskopfs synchronisiert, was verschiedene Injektionsmuster ermöglicht - Mehrstufiges Filtersystem - Leicht demontierbarer Injektionskopf Hersteller: Metalbud Nowicki Modell: MH-75 SAS Baujahr: 2011 Anzahl Nadeln: 75 Anzahl Köpfe: 1 Bandbreite: 370 mm Max. Injektionsgeschwindigkeit: 60 Zyklen/Minute Max. Leistung: 3.000 kg/h Injektionsvolumen: 5/100% Maschinenabmessungen LxBxH: 2.650 x 1.900 x 2.100 mm Maschinengewicht: 1.000 kg.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Thyssen Krupp Gerlach Preservation Tank Complete construction of the unit in stainless steel Fedpfx Aeihpbyjdqjpn with heating Year of manufacture: 2011 Dimensions: HxLxW = 100 x 556 x 83 cm You will find more preservation tanks in different sizes—new and used—in our shop! International shipping rates available upon request!

Kondisi: baru, The fine blasting device Type FB 1 was specifically designed for mobile use. Based on the proven "sandmaster" fine blasting system and in combination with pneumatic control, the device offers highly flexible operation. In addition, the FB 1 fine blasting device can be ideally combined with other injector series blasting cabinets by using the optionally available console. As the exclusive representative for sandmaster in the Baden-Württemberg region, IS Zubehör GmbH offers the Fine-Blaster FB 1 from our showroom. - "sandmaster" fine blasting system - Abrasive grain size: Mesh 46 – 180 - Nozzle diameter: 0.8 – 2.7 mm - Fully pneumatically controlled - Dimensions: 210 x 350 x 310 mm (W x D x H) You are welcome to inspect the equipment in our showroom in Stuttgart by prior appointment. The device is available immediately. Fodpfsdrfqtjx Adqopn

Kondisi: bekas, Combined conveying unit, blower connected to hopper, blower conveyor, combined conveyor, AirMove components, injector conveyor, injection conveyor - Injector Conveyor: Injection conveyor with distributor, without blower - Feed hopper: 175 x 180 mm - Distribution radius: 200 mm - Outlet pipe: Ø 60 mm - Drive motor: Euronorm 0.09 kW - Quantity: 3 conveyors available - Price: per unit - Overall dimensions: 1630/500/H1230 mm - Weight: 57 kg Fsdpfxjhg Rg Rs Adqspn

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Battenfeld HM 100/525 Injection Moulding Machine Year: 2006 Control System: Unilog B4 Technical Specifications Clamping Force: 1000 kN Platen Size (H x V): 680 mm x 594 mm Tie Bar Spacing: 470 mm x 420 mm Mould Opening Stroke: 500 mm Minimum Mould Height: 250 mm Maximum Daylight: 750 mm Hydraulic Ejector Stroke: 150 mm Ejector Force Forward/Backward: 41.2 kN Injection Unit Screw Diameter: 40 mm Ls/D Ratio: 22 Injection Pressure: 2100 bar Injection Volume: 251 cm³ Shot Weight (PS): 228.4 g Injection Stroke: 200 mm Screw Speed: 0 - 318 rpm Maximum Plasticizing Rate: 30.4 g/s Nozzle Pressure: 86 kN Fjdpfx Ajk Rnvmsdqspn Electrical & Hydraulic Equipment Installed Heating Power: 12.1 kW Adjustable Barrel Heating Zones: 1+3 Pump Motor Power: 18.5 kW Hydraulic Oil Capacity: 275 liters Dimensions & Weight Total Machine Weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Kondisi: bekas, Wolfking Belham multi-needle injector Model: B1-15S Serial number: 8207-01303 Equipped with 120 needles, walking-beam conveyor, product advancement, 500 mm working width Fjdeb Uaivspfx Adqspn

Kondisi: baik (bekas), Tahun pembuatan: 2007, de Fjdsvzq T Eopfx Adqopn

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), GAROS GSI-160 ID.NO. 2576 Garos GSI-160 salt injector with accompanying processing unit. Bridge width 560 mm, suitable for high-capacity production; products can be processed both with or without bones. Fjdpfxepcc Sio Adqspn Dimensions: 240 x 175 cm, height 240 cm.

Kondisi: baru, Tahun pembuatan: 2025, Injector gravity trough-belt blasting machine for blasting serial parts with glass beads, corundum, ceramic balls, etc. Thanks to the gravity system, the machine achieves 15-20% higher blasting performance compared to a standard injector blasting system. The unit features a bucket elevator with air separator for abrasive cleaning. Up to 20 programs can be stored for various blasting tasks. Fpodpfehunz Nex Adqon

Kondisi: bekas, Injectors, diesel engine nozzles -Type: 0423 1554 Fedpfeb A Sgiex Adqspn -Quantity: 12 units available -Price: per unit -Weight: 0.3 kg

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Arburg 221 K 350 - 100 U Injection Moulding Machine Year of manufacture: 2001 Control system: Selogica Clamping system: Toggle TECHNICAL SPECIFICATIONS Clamping force: 350 kN Tie bar spacing: 221 mm Platen dimensions: 324 mm x 250 mm Fpedpep At Rdefx Adqon Mould height: min. 150 mm - 300 mm Maximum opening stroke: 200 mm Maximum daylight between platens: 500 mm Screw diameter: 20 mm Injection volume / Shot weight: 31 ccm / 26 grams PS Injection pressure: 2500 bar GENERAL INFORMATION Motor power: 7.5 kW Heater power: 4.5 kW Operating hours: on request Dimensions (L x W x H): 2.7 m x 1.4 m x 2.2 m Weight: 1060 kg

Tahun pembuatan: 2005, Kondisi: belum diuji (bekas), IR-Härtungsofen für die Applikation von Conformal Coating. Fsdpfxsvgxlgj Adqopn Die Maschine ist betriebsbereit! Für weitere Informationen bitte anfragen!

Tahun pembuatan: 2006, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: FF102-062, • Masse (LxBxH) mm; • Anschlussleistung 5,0 kW; • Stromversorgung 400 V; • Arbeitsdruck 3–5 bar; • 102 einzelne, nicht federbelastete Nadeln, 2 mm; Fpsdpfod D I Hqox Adqjn • Bandbreite 400 mm.

Kondisi: bekas, Tahun pembuatan: 2005, Overview This automatic 14-needle injector, model: P14, was manufactured in Switzerland in 2005. It is one of the smallest automatic systems with 14 needles arranged in 2 rows, designed for enhanced cost-effectiveness in small and medium-sized operations. The machine guarantees reproducible injection accuracy through individual needle valve control. The feed speed is manually adjustable. Fpedpfsvttf Uox Adqjn Construction features: fully made of stainless steel, completely insulated. Technical Data - Length/Width/Height: 1200 mm / 450 mm / 1800 mm - Power: 0.75 kW - Maximum product height: 180 mm - Maximum product width: 280 mm Scope of delivery Automatic needle injector | Pökomat | P14 | 2005

Kondisi: baik (bekas), Die Rühle IR56 Injektor, ausgestattet mit einem Set aus 56 Nadeln und der entsprechenden Anzahl an Einschnittmessern, ist für die Verarbeitung verschiedener Fleischsorten – sowohl mit als auch ohne Knochen, darunter Geflügel, Fleisch und Fisch – konzipiert. Dank der fortschrittlichen Mikroprozessorsteuerung können sämtliche Prozessparameter präzise eingestellt werden, was eine gleichmäßige und qualitativ hochwertige Endproduktqualität gewährleistet. Der Injektor ermöglicht die exakte Dosierung der Lake auf jede einzelne Nadel, wodurch die Effizienz und Genauigkeit des Prozesses erhöht werden. Fsdpfx Aerwmndedqjpn Merkmale: – Separate Lakenversorgung für jede Nadel, für maximale Präzision und Effizienz der Injektion – Maschinenleistung bis zu 5.000 kg pro Stunde – Zartmacher – zusätzlicher Balken mit Einschnittmessersystem – Unabhängige Abschaltung der Lakezufuhr zu einzelnen Nadeln, um die Bildung sogenannter Lakenester beim Auftreffen der Nadel auf einen Knochen zu verhindern – Integrierte Lakestation, durch deren Bauweise der Kontakt von gebrauchter und frischer Lake ausgeschlossen wird – 350 mm breites Förderband – 200 mm Produktdurchlasshöhe Die Konstruktion des Geräts sowie die leistungsstarke Lakepumpe bestehen vollständig aus Edelstahl. Leistung: 7,5 kW Stromversorgung: 400 V, 50 Hz, 3N Maße (L x B x H): 1600 x 750 x 2020 mm Gewicht: 750 kg

Kondisi: bekas, Injectors, diesel engine injectors, fuel injection nozzles -Type: 0223 3085 -Quantity: 10 units available Fodpfx Ajb A N R Hodqspn -Price: per unit -Weight: 0.4 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Fpedpfek Rnq Njx Adqon Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Tahun pembuatan: 1997, Kondisi: hampir baru (bekas), Fomaco FGM 16/64 injector. Fpsdpod Ixcfofx Adqjn Conveyor dimensions: Length: 130 cm Width: 24.5 cm Height: 120 cm Opening dimensions: Width: 28 cm Height: 14 cm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 375 V 500-100 Vertical Injection Moulding Machine Year of manufacture: 2012 Clamping unit: Clamping force: 50 tons Max. opening force kN/mm: 40/250 Mould height, fixed / adjustable min. mm: 200 Daylight opening, fixed/adjustable max. mm: 450-550 Max. weight of moving mould half: 230 kg Ejector force/stroke max. kN/mm: 30/70 Injection unit 100: Screw diameter: 20 mm Effective screw length l/d: 25 Injection volume: 31 cm³ Fpjdpfsi Dahlex Adqsn Shot weight: 29 g /PS Machine weight: 3049 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, TOSHIBA IS 650 GTW Injection Moulding Machine Year: 2007 Screw diameter: 95 mm Fpsdpfx Adoi Dbtroqsn Injection weight: 2,900 g Injection volume: 3,150 ccm Clamping force: 650 tons Tie bar distance: 1,080 x 1,080 mm Platen size: 1,530 x 1,530 mm Opening stroke (Max. distance): 1,800 mm Opening stroke (Min. distance): 450 / 900 mm Machine weight: 30 tons Machine dimensions: 7.9 x 2.5 x 2.2 m Core function: 5 cores Pneumatic drive function: yes Hydraulic clamping function: yes Machine dimensions (LxWxH): 7.9 m x 2.5 m x 2.2 m Machine weight: 30 tons

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Krauss Maffei Injection Moulding Machine KM 50 - 100 PX Year of manufacture: 2023 Fedpfxopy Drhe Adqopn Clamping Unit 5-point clamping system with double toggle (3 plates), equipped with electric servo drive. Injection unit with electric servo drive and plasticising axes, as well as servo-hydraulic movement for the injection unit. MC6 Control System based on industrial PC with real-time Ethernet technology. Plasticising Unit Complete thermoplastic plasticising unit, screw diameter: 22 mm Nozzle radius: 10 mm, nozzle opening: 4 mm Clamping force [kN]: 500 Platen dimensions (HxV) [mm]: 490 x 440 Tie bar spacing (HxV) [mm]: 370 x 320 Min./max. mould height [mm]: 150 - 450 Max. opening stroke [mm]: 750 Injection Unit Screw diameter [mm]: 22 Injection volume [cm³]: 38 Shot weight [g]: 35 Injection pressure [bar]: 2500 Electrical-Hydraulic Equipment Rated pump motor power [kW]: 6.1 Heater power [kW]: 6.3 Dimensions and Weight Net weight with control cabinet [t]: 4 Dimensions (L x W x H) [m]: 4.2 x 1.44 x 1.85

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Netstal SynErgy 1500-600 injection moulding machine - Year of manufacture: 2003 - Maximum clamping force: 1500 kN - Injection unit: 600 Fpodjm Sgrzspfx Adqjn - Screw diameter: 50 mm - Shot volume: 353 ccm - Shot weight: 339 g - Injection pressure: 1890 bar - Hydraulic ejector on moving platen - Hydraulic core on moving platen - Hydraulic core on fixed platen - Two air valves - Mould height: 250-550 mm - Mould opening stroke: 0-450 mm - Tie bar spacing: 460 x 460 mm - Machine weight: 11,200 kg