Beli Penggilingan Kepala bekas (11.530)

Kondisi: siap digunakan (bekas), produsen pengendali: Heidenhain TNC 530, berat kosong: 45.000 kg, panjang total: 11.055 mm, lebar total: 6.320 mm, tinggi total: 4.140 mm, ENGLISH TRANSLATION: Type: DMC-4100LH 2800 mm between columns!! MA-25 2-axis universal milling head – 20 kW – 6000 rpm C-axis range: 0–360° A-axis range: +/- 110° Coolant through spindle 40 bar Total power: 67 kW Ihodpfoxp Sk Dox Aa Net No foundation required! The Johnford DMC series double column bridge milling machine with moving table is constructed from a one-piece Meehanite cast iron bridge/column structure, reportedly occupying 30 percent less floor space than comparable C-frame vertical machining centers. The bridge mill is available in both moving table and sliding column (fixed table) configurations, ranging from 91 x 91 x 76 cm up to 18 x 6 meters. The bridge milling machines feature a long base with full support of the table over the entire 130 cm Y-axis travel, enabling machining of heavy workpieces. On the Y and Z axes, a constant weight is supported at all times, while only the X-axis carries dynamic loads. This results in precise machining with tight tolerances during high-speed operations. As there is no table overhang, the inclination and yaw angle of the X-axis are eliminated. The distance between the spindle center line and the column is minimized, providing extra rigidity. The machine’s heavily ribbed cast iron construction ensures longevity and optimum surface finish. The combination of dual chip augers and a conveyor belt ensures complete chip removal with minimal manual cleaning. Moreover, finite element analysis (FEA) is used in the design of each bridge mill, simulating the effects of realistic conditions such as vibration, heat, fluid flow, and other physical influences. Longitudinal travel X-axis: 4100 mm Transversal travel Y-axis: 2800 mm Vertical travel Z-axis: 800 mm Table clamping dimensions: 4200 x 2400 mm Spindle power: 30 kW Spindle taper: BT 50 Maximum speed: 6000 rpm

Kondisi: bekas, Tahun pembuatan: 2008, de-hu-001 Ihedpfx Aajxbtqis Not

Kondisi: bekas, Tahun pembuatan: 1965, Dimensions (length/width/height): 10,460 × 5,715 × 5,537 mm Horizontal spindle head travel: 3,160 mm Vertical spindle head travel: 1,000 mm Milling length: 2,250 mm Iedpouh E Tbofx Aa Neht Machine weight approx.: 76,660 kg

Kondisi: sangat baik (bekas),

Kondisi: sangat baik (bekas), Mesin kepala Konig Iedpsx Tg Eaefx Aa Nsht Pembagi dan pembulat adonan 4 baris, 45-120 gr Listrik baru Piston baru Sabuk baru

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 800 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% Iodpfjx E Dncex Aa Noht • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: bekas, Tahun pembuatan: 2000, jarak pergerakan sumbu X: 9.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.500 mm, lebar meja: 1.200 mm, beban meja: 5.000 kg, panjang meja: 9.500 mm, 5-axis bed milling machine Table size: 9500 x 1200 mm Travel distances: X-axis 9000 mm, Y-axis 1500 mm, Z-axis 1500 mm Maximum table load: 5000 kg/m Ihjdpfx Aaex Tucme Net Vertically swiveling milling head, adjustable in 1° x 1° increments CNC control: Heidenhain TNC 430 CB If you have any questions about the machine or would like to arrange a viewing appointment, please feel free to contact us by phone or email.

Kondisi: baik (bekas), Technical Data: Travel distances: Longitudinal X-axis 762 mm Cross Y-axis 305 mm Vertical Z-axis 406 mm Quill travel 127 mm Spindle Mount Collet chuck Table size 1067 x 229 mm Speed range 50–3750 rpm, two speed ranges Weight 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y axis) - Machine lamp - Drill chuck 0–13 mm Ihsdpsw Ebhmjfx Aa Not - Collet chuck set - Machine vice, jaw width 150 mm - Safety guard, electrically interlocked, Type: ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop tested

Tahun pembuatan: 1999, Kondisi: bekas, de-to-hu-it-lt-lv-nb-nl-pl Ihedex Edwnjpfx Aa Nst

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Nomor katalog 7364 DATA TEKNIS - tinggi maksimal material yang dikerjakan: 160 mm - panjang kerja spindel: 250 mm Ihedpfx Aasx Sylqs Not - diameter spindel: 40 mm - diameter alat maksimum: 220 mm - meja kerja (p x l): 410x1000 mm - motor: 11 kW - 2 penjepit material – pneumatik - diameter soket hisap: 160 mm - dimensi (p/l/t): 1070x1260x1400 mm - berat: 650 kg KEUNGGULAN – produksi Jerman – set ekstra mata freis + kopyor – belum dicat ulang – mesin frais bekas, kondisi sangat baik Harga netto: 33.900 PLN Harga netto: 8.070 EUR sesuai kurs 4,2 EUR (Harga dapat berubah tergantung fluktuasi nilai tukar yang signifikan)

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Control: Mazatrol 640 MT Pro Travel paths: X-axis = 630 mm Y-axis = +/- 230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid traverse speeds of axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Maximum torque: 1,200 Nm Speed range: 35 to 3,300 rpm SUB SPINDLE Drive power: 26 kW Maximum torque: 500 Nm Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Maximum torque: 120 Nm Speed range: 15 to 12,000 rpm Maximum turning diameter: 760 mm Maximum turning length: 1,500 mm Tool magazine: 80 stations (Capto C6) Coolant/chip disposal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure coolant unit 70 bar Ihsdpfx Aexy Nzuea Nst - 7 pressure stages PLC-controlled - Double switching filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Counter-rotating synchronization of turning and milling spindles - C-axis 0.0001 degrees (sub spindle) - Overload monitoring system for spindle and axis feed system - Automatic on/off with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1500 U) - Hand type D3 (clamping jaw type A, B, C, D, E) - Max. workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blast device at chuck CONTROL OPTIONS - Cylinder interpolation - Interface set - Option package for 5-axis simultaneous machining - Synchronous threading, MAZACC2D, - EIA/ISO, tool length compensation, - Fully programmable B-axis 0.0001°, - Software for 5-axis simultaneous mode, - For main and sub spindle - 3-jaw quick change power chuck Ø 315 mm Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Kondisi: baru, Tahun pembuatan: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain path control TNC 128 Travel X/Y/Z = 610/400/450 mm Spindle speed 1-4500 rpm Power 8.5 kW at 100% duty cycle Spindle taper SK40 DIN 69871 (Form AD) with pull stud DIN 69872 Fixed angle table 800 x 425 mm, 6 x 14 H7 T-slots Coolant system 66 liters Electronic handwheel HEIDENHAIN HR 510 FS Further technical data available upon request. Isdpfxouf Sv Ds Aa Njht The machine is located at our premises in 71334 Waiblingen-Beinstein, available immediately, and can be inspected by arrangement. Please contact us in advance to schedule a visit.

Kondisi: sangat baik (bekas), Mesin penggiling meja dengan meja rol dan penjepit pneumatik serta unit pemakan HolzHer ETZ. 4 kecepatan, 2 – 12 m/menit. 3 rol pemakan baru. Ukuran meja: lebar 1000 mm, kedalaman 930 mm. Spindel 30 mm. Konstruksi kokoh. Panduan penggilingan dengan pengaturan halus. 4,5 kW. Berat sekitar 600 kg. Ihjdoudwlzopfx Aa Nst

Kondisi: baru, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, posisi kepala milling: Universal-Diagonal-Fräskopf, kecepatan spindel (maks.): 6.000 rpm, lebar meja: 1.100 mm, beban meja: 10.000 kg, panjang meja: 3.100 mm, berat keseluruhan: 27.000 kg, torsi: 1.178 Nm, daya motor spindle: 53 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, MESIN MILLING TEMPAT TIDUR BARU DENGAN MEJA PUTAR TERINTEGRASI Kontrol dan Motor: Kontrol jalur digital HEIDENHAIN TNC 640 Paket HEIDENHAIN: Motor, sistem pengukuran, dan handwheel Meja putar terintegrasi: Ø 1.100 mm IKZ: Sirkulasi pendingin internal - 36 bar Perlengkapan tambahan: Penukar alat rantai dengan penjepit ganda, 40 posisi Iedsm Tv Iijpfx Aa Njht Konveyor serbuk ganda berengsel (searah memanjang), satu di depan dan satu di belakang Penutup perimeter Akurasi: Akurasi posisi: 0,015 mm Akurasi pengulangan: 0,008 mm Hanya pertanyaan dari Jerman yang akan dijawab // Hanya permintaan dari Jerman yang akan diproses

Tahun pembuatan: 2000, Kondisi: bekas, 3 pallets Dimensions (Length/Width/Height) see images mm Iodpeupmwlefx Aa Nsht Machine weight approx. . t

Kondisi: bekas, Tahun pembuatan: 2021, produsen pengendali: Heidenhain, model controller: TNC 640, 001 Isdpoxv Nknefx Aa Noht

Kondisi: bekas, nomor mesin/kendaraan: 186137200089, mesin frais alat TOS bekas, model FNG 40 CNC Tahun pembuatan: 1988 dengan kontrol jalur Heidenhain TNC 155 dengan meja sudut tetap 800x400 mm Lintasan sumbu: X/Y/Z = 500/400/400 mm Rentang putaran: 10-3150 rpm Spindel: SK40 Pelindung serpihan yang dapat dipasang Dokumentasi untuk mesin dan kontrol tersedia. Ihedpfx Aasxf Inks Njt Mesin berada di 71334 Waiblingen-Beinstein dan dapat dilihat dengan janji temu.

Kondisi: baru, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, posisi kepala milling: Universal-Diagonal-Fräskopf, kecepatan spindel (maks.): 6.000 rpm, lebar meja: 1.100 mm, beban meja: 14.000 kg, panjang meja: 5.100 mm, berat keseluruhan: 35.000 kg, torsi: 1.178 Nm, daya motor spindle: 53 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, MESIN FRAIS TEMPAT TIDUR BARU PABRIK Kontrol dan Motor: Kontrol jalur digital HEIDENHAIN TNC 640 Paket HEIDENHAIN: Motor, sistem pengukuran, dan handwheel IKZ: Pasokan pendingin internal - 36 bar Perlengkapan tambahan: Drum tool changer dengan penjepit ganda, 40 posisi Konveyor serpihan tipe rantai ganda (sejajar), satu di depan dan satu di belakang Persiapan sumbu ke-4 (meja putar) Penutup perimeter Akurasi: Akurasi pemposisian: 0,025 mm Ihedpfxsq Ixh Hs Aa Net Akurasi pengulangan: 0,008 mm Hanya pertanyaan dari Jerman yang akan dijawab

Kondisi: bekas, Tahun pembuatan: 1973, Weight 3 t X-travel 1000 mm Isdpfx Ajwzyt Tja Njht Machine no.: 110 Head swiveling +/- yes

Kondisi: bekas, Description: Main Spindle: Technology: Motor spindle Speed: 4,200 rpm Power: 22 kW Torque: 427 Nm Spindle bore: 91 mm Hollow clamping cylinder: 86 mm C-axis: High-precision package Chuck: SMW KNCS-N 275-86 K8 Counter Spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 22 kW Torque: 420 Nm Spindle bore: 80 mm Hollow clamping cylinder: 77 mm C-axis: High-precision package Chuck: SMW BHD-FC 210-52-3 Tool Carrier X/Y/Z/B: Technology: Milling spindle Ijdpfx Ajwu I Irsa Noht Speed: 12,000 rpm Power: 22 kW Torque: 120 Nm Tool holder: HSK 63 Y-axis: 250 mm (+/- 125 mm) B-axis: 240° Tool Magazine: Number of stations: 80 Equipment / Accessories: Positioning systems: Direct in X/Y/Z-axis (glass scales) Chip removal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ), 70 bar Coolant temperature control: Deltatherm E4 Chip flushing: Work area, hand gun Precision package: High-precision C-axes Software package: 5-axis auto-tuning Software option: Multi-function tool Gear cutting software package: Hobbing, power skiving CNC extension: Conversational programming Workpiece measurement: Renishaw probe Tool measurement: Tool setter Tool breakage monitoring: Renishaw TRS2 B-axis: NC function and rotary function Bar feeder: LNS Quickload Servo III+ Automation-ready: Robot interface Machining area door: Automatic Setup mode: Electronic handwheel

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox speeds 1400/2800 rpm Table size: 860 x 240 mm, 3 T-slots 14 mm, spindle taper SK30 Travel distances (X/Y/Z): 450/200/430 mm, horizontal speeds: 18 steps from 32 to 1342 rpm, vertical speeds: 18 steps from 72 to 2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overhead support arbor brackets, 1 collet chuck with key, 1 machine vice with handle. Ijdpsiqkc Iefx Aa Nsht

Kondisi: baru, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.000 mm, posisi kepala milling: Universal-Diagonal-Fräskopf, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, kecepatan spindel (maks.): 6.000 rpm, rentang pivot: 1 °, panjang meja: 9.500 mm, lebar meja: 1.100 mm, torsi: 1.178 Nm, beban meja: 62.000 kg, pasokan pendingin: 36 batang, berat benda kerja (maks.): 62.000 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, MESIN FRAIS TIANG BARU PABRIK Ihedpfxem Tv D As Aa Njt Kendali dan Motor: Dua kontrol jalur digital HEIDENHAIN TNC 640 (satu di bagian depan mesin dan satu di bagian belakang kabin) Paket HEIDENHAIN: motor, sistem pengukuran, dan handwheel Perlengkapan tambahan: Pengganti alat rantai dengan penjepit ganda, kapasitas 60 alat Konveyor serpihan tipe double hinge-belt (memanjang), satu di depan dan satu di belakang Akurasi: Akurasi posisi: ± 0,040 mm Akurasi pengulangan: ± 0,008 mm Hanya permintaan dari Jerman yang akan direspon // Hanya permintaan dari Jerman yang akan diproses

Kondisi: bekas, EN-001 Ihsdjvxmy Nopfx Aa Net

Kondisi: baru, jarak pergerakan sumbu X: 6.200 mm, jarak lintasan sumbu Y: 2.600 mm, jarak gerak sumbu Z: 1.200 mm, kecepatan pemakanan sumbu X: 10.000 m/menit, laju pemakanan gandar Y: 20.000 m/menit, laju pemakanan sumbu Z: 15.000 m/menit, panjang meja: 6.000 mm, lebar meja: 2.400 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 19.000 kg, posisi kepala milling: vertikal, torsi: 1.350 Nm, hidung spindel: SK 50, daya motor spindle: 53 W, masa garansi: 12 bulan, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Kontrol dan Motor: HEIDENHAIN TNC 640 Kontrol jalur digital Paket HEIDENHAIN (motor, sistem pengukuran, handwheel) IKZ: Pasokan pendingin internal, 70 bar Iedpfshy Avtsx Aa Noht Perlengkapan tambahan: Pengganti alat tipe rantai dengan pengambil ganda, 60 posisi Konveyor ulir ganda (memanjang) Konveyor serpihan sabuk engsel (melintang) Persiapan untuk sumbu ke-4 (meja putar) Penutup penuh, tertutup atas Akurasi: Akurasi posisi: 0,045 mm Akurasi pengulangan: 0,030 mm Hanya permintaan dari Jerman yang akan dilayani.

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840 Dsl, Description: General: Year of manufacture: 2013 Control: Siemens 840 Dsl Turning length: 1,185 mm Swing diameter: 540 mm Bar capacity: 75 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS -N 260-78 C-axis: 0.001° Flushing: Chuck flushing Counter spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS -N 260-78 C-axis: 0.001° Flushing: Chuck flushing + through-spindle flushing Tool carrier I (X/Y/Z/B): Technology: Milling spindle on moving column Milling spindle speed: 12,000 rpm Max. power: 22 kW Tool holder: Capto C6 X-axis: 450 mm Y-axis: 200 mm Z-axis: 1,200 mm Ijdpfx Aexl Nfqoa Nsht B-axis: +/- 110° Position measuring systems: Direct (glass scales) Tool carrier II (/X/Y/Z): Technology: Turret on cross slide Tool drive: Direct drive Speed: 10,000 rpm Power: 14 kW Torque: 34 Nm X-axis: 195 mm Y-axis: 80 mm Z-axis: 1,200 mm Tool holder: VDI 40 Number of tool stations: 12 pcs Automation: Technology: Gantry loader with stacking magazine Workpiece diameter: 50 - 200 mm Max. workpiece height: 230 mm Max. workpiece weight: 15 kg Number of stacking units: 20 pcs Max. load per stacking unit: 40 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 80 bar Tool magazine: Chain magazine, 120 stations Workpiece measurement: Renishaw probe Tool breakage monitoring: Swing wire Automation: Gantry loader with stacking magazine Emulsion mist separator: Mechanical Setup mode: Electronic handwheel Work area door: Automatic Chucks: 2x SMW KNCS 260 Tool holders: Various Capto C6 holders