Beli Pipa Meluruskan Mesin bekas (79.018)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 34.797 h, nomor mesin/kendaraan: 2011-0250, Diameter pipa (maks.): 600 mm, Panjang pipa (maks.): 1.500 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 200 mm, ketebalan dinding: 3 mm, Original machine built in 1996. In 2011, the unit was comprehensively overhauled by the OEM for approximately €250,000: extensive renewal of both the electrical and mechanical systems. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 – 1,500 mm Tube outer diameter: 28 mm – 60 mm Material Parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion Data Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Twist angle: max. 360° Twist speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control desk (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance Data Total power requirement: 55 kW Hydraulic reservoir capacity: 340 l Control System Bending planes: up to 6 (CNC programmable) Positioning system: NTB design Control unit: Schwarze-Robitec operating and control panel FEATURES - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, guide rail, mandrel retraction, reinforced guide rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (dual) - Schwarze-Robitec control panel Hedpfsx Srklsx Aa Njng - Rittal control cabinet cooling unit type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operator knowledge. No faults are known. The machine is currently dismantled.

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 5 h, Fungsionalitas: berfungsi sepenuhnya, Mesin bending dan pemotong CNC otomatis penuh atau semi-otomatis. Ukuran pipa dari diameter 6,0–150,0 mm. Mesin CNC untuk bending, pengecilan, pemotongan, desain khusus tersedia. Stok mesin baru untuk dijual. Harga yang tercantum untuk mesin bending type60nc pipa 2,5 inci. Hnjdpfx Aajvl S Dgo Nsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Rohrdurchmesser-42.0-x-3.0-STAHL-mm Hnjdpex U El Iefx Aa Njg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: CV0604, Diameter pipa (maks.): 1.400 mm, Perlengkapan: Penandaan CE, de Hjdjw Igr Ijpfx Aa Nong

Kondisi: bekas, Tahun pembuatan: 2007, Diameter pipa (maks.): 35 mm, berat keseluruhan: 2.700 kg, panjang total: 2.400 mm, lebar total: 1.400 mm, tinggi total: 2.000 mm, Mesin deformasi pipa Merek: BLM Hnodpfxsx Tt H Ro Aa Njg Model: TUBE-FORM Tahun: 2007 No. seri: 415050200004 Berat: 2700 kg Daya: 12 KVA Tiga fasa 380V Dimensi: 2400x1400x2000 (t) mm Diameter pipa yang dapat diproses: 35 mm Gaya dorong: 3,5 ton Gaya pengunci: 5 ton Langkah kerja maksimum: 130 mm

Kondisi: bekas, RGM 3 adalah mesin serbaguna untuk pemrosesan ujung pipa yang mengesankan dengan konstruksinya yang kokoh dan kebutuhan ruang yang minim, sangat cocok untuk pemrosesan pipa dan profil. Dengan cekaman cepat yang praktis di bagian depan dan cekaman di bagian belakang, mesin ini memungkinkan penanganan mudah serta penyesuaian untuk berbagai diameter pipa. Selain itu, mesin ini dilengkapi dengan pemotong pipa dan alat pembebas gerinda dalam pipa, memastikan pemrosesan yang efisien dan presisi. RGM 3 juga dilengkapi dengan rangka dasar yang dapat dipindahkan sehingga mobilitasnya meningkat. Mesin tangguh dan andal dari KNUTH ini adalah pilihan sempurna jika Anda mencari solusi efisien untuk kebutuhan pemrosesan pipa Anda. Kini Anda dapat meminta penawaran atau memesan RGM 3 secara online untuk mewujudkan proyek pemrosesan ujung pipa Anda dengan sukses. Hjdouxc Rhspfx Aa Njng

Tahun pembuatan: 2025, Kondisi: baru, Spiral Pipe Machine Metformer MTR1500 The machine is designed for the production of round SPIRO-type ductwork. The produced ducts comply with DIN EN 12237, BS, and Eurovent standards. Features: - Sheet metal strip decoiler with vertically adjustable brake - Forming strips for pipe production Hnodpep T Smljfx Aa Njg - Fast, burr-free cutting with rotary shear blades - LCD touchscreen control - Essential automatic lubrication system - Automatic angle control - Automatic cutting during pipe production - Remote access and control - Production reporting system (daily, weekly, monthly quantities) - Automatic error detection METFORMER POLAND

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 48 h, nomor mesin/kendaraan: BD38CNCOMPACT, Diameter luar pipa maks. 38 mm, kontrol CNC. Model kompak. Hnodpfx Asvu R Amea Nsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Ercolina CML TB-76 Rohrbiegemaschine Ausgezeichneter Zustand Baujahr 2006 Hodpeu H Ibnsfx Aa Nong Fußpedalsteuerung Gewicht: 193 kg Stromversorgung: 415 V / 3-Phasen

Tahun pembuatan: 1998, Kondisi: baik (bekas), Manufacturer unknown Year of construction ?? Hedpof Axilefx Aa Nsng TRAV H/ 2830 The Aro Corporation Mod.78051BSN Technical specifications: Pneumatically operated Suitable for internal milling from 50–225 mm Accessories as shown

Kondisi: baru, For sale: pipe straightening machine from the German manufacturer SMS MEER. The machine is brand new and was dismantled from a facility that went bankrupt during the delivery and installation process. The machine is equipped with two Siemens drive motors, each with 200 kW power. The straightening rollers have the following dimensions: length 460 mm, diameter at the ends 400 mm, diameter at the center 300 mm. The weight of the machine alone is 44 tons, total weight 55 tons. For interested parties, I can provide many photos taken before disassembly. Hsdpfxom H Unhs Aa Nong

Kondisi: baru, EM 250 adalah mesin pemrosesan ujung pipa yang bertenaga dari kategori pengolahan pipa dan profil, sangat cocok untuk semua aplikasi pengerjaan pipa, profil, dan material datar. Mesin ini secara andal menghilangkan serpihan dan gerinda pada benda kerja, baik di sisi dalam maupun luar, tanpa mengubah tepi potongan. Dilengkapi dengan sikat kawat yang kokoh, EM 250 memastikan pemrosesan yang efektif di bengkel industri maupun kerajinan. Mesin ini memiliki kaki mesin yang kokoh dan dapat dihubungkan ke sistem ekstraksi eksternal. Fitur khususnya adalah sikat bundar kawat yang tersedia dalam berbagai ketebalan kawat, termasuk untuk pemrosesan baja tahan karat. Anda juga mendapatkan garansi 5 tahun untuk motor penggeraknya. Mesin pemrosesan ujung pipa ini adalah tambahan yang sangat baik untuk lini produksi Anda. Pesan EM 250 sekarang – pilihan sempurna untuk pemrosesan pipa dan profil Anda. Hsdpfeu E H Tgex Aa Nsng

Kondisi: baru, Tahun pembuatan: 2025, MASZYNA DO PRODUKCJI RUR SPIRO Metformer MTF 1602 TUBEFORMER Hsdpfewa Skhex Aa Njng The machine is designed for the production of round SPIRO-type air ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: - Sheet metal decoiler with vertically adjustable brake - Forming strips for tube production - Burr-free fast cutting thanks to rotary disc knives - LCD touchscreen control - Automatic lubrication system - Automatic cutting during tube production - Production report system (daily-weekly-monthly output) - Automatic error detection Technical Data: 1. Diameter range: 80–1600 mm 2. Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminium: 0.4–1.3 mm 3. Strip width for 0.4–1.0 mm: 137 mm Strip width for 1.1–1.3 mm: 140 mm 4. Production speed: 60 m/min 5. Motor power: 11.25 kW 6. Forming: smooth, single or double bead 7. Lock: external lock seam 8. Cutting system: rotary disc cutting system 9. Weight: 2900 kg 10. Machine dimensions: 1900 × 2050 × 1500 mm 11. Decoiler: 1780 × 1130 × 1250 mm 12. Table: up to 2700 × 950 × 1200 mm Operating Environment: - Power supply: 3-phase, 380V, 50Hz - Clean environment - Max ambient temperature: 40℃ - Min ambient temperature: -5℃ - Humidity: 55–85% - Altitude:

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, Wire diameter range: 1.5 - 7.0 mm Cutting lengths: max. 3,000 mm Feed speed: 5 - 120 m/min *Machine has been completely repainted* Hnedpsc Ucxfjfx Aa Nsg

Kondisi: baik (bekas), Tahun pembuatan: 2005, jenis kontrol: Kontrol CNC, - Sudut pembengkokan maks: +/- 180 + 10° - Panjang dorongan pipa: 4100 mm Hjdjx T Di Ajpfx Aa Neng - Pipa baja bulat hingga 30 x 2,2 mm² - Pipa stainless steel bulat hingga 30 x 1,5 mm - Pipa persegi 20 x 2,5 mm - Waktu tekuk 90 derajat: 1,5 detik (maju) - Kecepatan pemajuan longitudinal: 450 mm/det - Rentang radius maks: 125 mm - Kepala bending berdiri bebas, panjang 850 mm - Penggerak sumbu pembengkok elektrohidraulis

Kondisi: baru, Tahun pembuatan: 2025, EN: Electric non-mandrel tube bending machine. A precise and efficient device for bending steel, copper, aluminum, and brass tubes. The ability to select the optimal bending radius ensures high-quality results without material deformation. The featured bender is very easy to operate. Tube bending machines are used for single-piece and small-series production of parts in the automotive industry, furniture manufacturing, architecture, and garden tool production. The main bending die is driven via a reduction gearbox by an electric motor. The device can operate in two modes: manual and semi-automatic. Its simple and robust construction guarantees long-term, trouble-free operation. Standard equipment: - Digital bend angle readout - The BENDMASTER 40A machine comes equipped with dies for tubes of the following diameters: 17.2; 21.3; 26.9; 33.7; 38.1 mm Alternative standard equipment: - Digital bend angle readout - The BENDMASTER 40A machine comes equipped with dies for tubes of the following diameters: 16; 20; 25; 32; 38 mm Technical data: MAXIMUM BENDING ANGLE: 180° DIE ROTATION SPEED DURING BENDING: 5 rpm MAIN MOTOR POWER: 1.5 kW OVERALL MACHINE DIMENSIONS: 720 x 500 x 1030 mm WEIGHT: 330 kg Hjdevugx Dopfx Aa Neng

Kondisi: baru, Tahun pembuatan: 2025, DNE tube and profile laser cutting machines (among the best systems on the market) are distinguished by their outstanding price-performance ratio. The machines are robust, fast, and dynamic in operation. You can choose between a semi-automatic and a fully automatic tube loader. Depending on your requirements, these machines are available for tube diameters of up to 240 mm, 350 mm, 520 mm, and 640 mm. Laser power options range from 3 to 12 kW, and they can process lengths of up to 12 meters. A 45-degree laser cutting head is also available. We are happy to provide you with a quote and are confident that you will be satisfied. Our own German service team will support you from the installation of your laser cutting system to operator training. Hnedpfx Aaeq U A U Uj Neg

Kondisi: baru, The KPB 81 is a powerful tube and profile bending machine from the KNUTH series, combining maximum bending performance with advanced engineering. Equipped with three motor-driven rolls and hardened rolls and shafts, it ensures precise bending of medium and heavy steel profiles. The hydraulically adjustable bending rolls provide not only high drive power but also optimal adaptability to different profile shapes. Additionally, the KPB 81 features an adjustable overload protection and the capability for both horizontal and vertical operation. Standard accessories include a digital display, operator control panel, and a foot switch with emergency stop function. This machine is ideally suited for metal construction, locksmith workshops, as well as applications in the furniture industry and advertising technology. Purchase your KNUTH KPB 81 tube and profile bending machine now and benefit from its robust performance in tube and profile processing. Hedjn Upgljpfx Aa Nsng

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Wire diameter range: 2.5 – 7.0 mm Cut-off lengths: up to 4,000 mm Hjdofkx Trspfx Aa Nong Feed speed: 40 – 80 m/min *complete with WEBER DH 1000 floor pay-off*

Kondisi: baik (bekas), Tahun pembuatan: 2008, jenis kontrol: Kontrol CNC, Diameter pipa baja tahan karat: hingga 42 x 2,0 mm Diameter pipa baja: hingga 42 x 3,0 mm Sudut tekuk maks.: +/- 180 + 10° Hodpsx T Diisfx Aa Nsng Momen tahanan: 4,1 ccm Tekanan kerja: 6 bar Kebutuhan daya total: 5,5 kW Bobot mesin sekitar: 3 t Kebutuhan ruang sekitar: 6100 x 2300 x 1300 mm

Kondisi: baru, Tahun pembuatan: 2025, An accurate and efficient industrial pipe bending machine for bending steel, copper, aluminum, and brass pipes. The option to select the optimal bending radius ensures high-quality results without material deformation. The presented pipe bender is very easy to operate. Pipe bending machines are used for single and small-batch production of components in the automotive, furniture, architectural, and garden tool manufacturing industries. The main bending die is driven by a reduction gearbox with an electric motor. The machine can operate in two modes: manual and semi-automatic. Its uncomplicated, robust design ensures long-lasting, trouble-free operation and guarantees ease of use. Standard equipment: - Digital readout for bending angle - The BENDMASTER is equipped with dies for pipes with a diameter of: 38.1, 48.3, and 70 mm Technical data: - MAXIMUM PIPE DIAMETER: 70x5 mm - MAXIMUM SQUARE PROFILE SIZE: 50x50x2 mm - MAXIMUM BENDING ANGLE: 270° - DIE ROTATION SPEED (BENDING): 1.2 rpm - DIE ROTATION SPEED (RETURN): 2.4 rpm - MAIN MOTOR POWER: 5 kW - MACHINE DIMENSIONS: 1300x700x900 mm - WEIGHT: 680 kg For more information, please contact us by phone or email. We invite you to view our offer on our website. Hnsdpfx Aaovugv Aj Njg

Kondisi: baru, de-fi-001 Hnsdpjwhkf Hefx Aa Neg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Wire diameter: 0.1 - 1.3 mm Cut length: 5 - 70 mm Output: up to 400 cycles/min Hnsdj Syv Tspfx Aa Njg Complete with cooling unit and motorized wire spool

Kondisi: baik (bekas), Tahun pembuatan: 1998, Diameter pipa: 20 - 60,3 mm Panjang pendorongan pipa: 4500 mm Hnedox T Dhfopfx Aa Njg Berat mesin sekitar: 0,11 t Kebutuhan daya keseluruhan: kW Kebutuhan ruang sekitar: 5700 x 1600 x 900 mm - Pra-pilihan 4 sudut pembengkokan melalui kenop putar

Kondisi: baik (bekas), Tahun pembuatan: 1994, jenis kontrol: Kontrol CNC, produsen pengendali: Siemens, model controller: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190° Connected load: 400 V / 50 Hz / 85 A Dimensions (L x W x H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connected load: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm Hsdpfx Aox T Dguea Neng There were a few mandrels with engravings directly marked onto them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outer diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has a value of approx. €150,000.