Beli Premelter bekas (90)

Kondisi: bekas, Tahun pembuatan: 2011, Perfect binding line Kolbus KM 600 Lhodpjy Uvfrofx Ac Hsk Year of manufacture: 2011 Comprising: Gathering Machine Kolbus ZU 804 Description: - Manual feed station - Number of gathering stations: 20 - Optical signature detection: Sygna-Lynx - Air Center: Becker - Setup unit - Delivery for incomplete products Perfect Binder Kolbus KM 600 Production counter: approx. 12,800,000 Description: - Semi-automatic adjustment - Co-Pilot with touchscreen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction, the machine was linked to a central extraction system - Drive station for spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: LH 375 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Cover feeder: RA 49.A - 1st pressing station - 2nd pressing station - Laying down device (to the left) Conveyor Section Kolbus - Conveyor system, length (approx.): 20 m - Emergency delivery Three-Knife Trimmer Kolbus HD 143.P Year of manufacture: 2011 Production counter: approx. 12,570,000 Description: - Co-Pilot with touchscreen - Infeed belt from the right - Automatic magazine for inline production - Cut counter - Product counter - Knife presetting unit - Number of knife sets in total: 2 - Interchangeable cutting cassettes (standard set) The pictures also show a side stitching unit, which is mainly used for the production of schoolbooks for the Middle Eastern market. This unit is not included in the offer price but can be offered separately at an additional cost upon request.

Kondisi: bekas, Gluing unit, gluing component, gluing head, heated pot for edge bander, edge banding machine, pre-melting unit with granulate hopper - The pre-melting device ensures that a sufficient supply of hot melt adhesive is always available - Manufacturer: ENA - Model: 15-259 Lhedjd Dt R Espfx Ac Hsk - Electrically heated - Dimensions: 580/220/H570 mm - Weight: 18.7 kg

Kondisi: bekas, Gluing aggregate, gluing unit, gluing head, heated glue pot for edge bander, edge banding machine, premelting unit with granulate container -Manufacturer: HOMAG -Scope of delivery: see pictures -Electrically heated -Quantity: 1x glue pot available Lhedjb Uhk Uepfx Ac Hsk -The premelting unit ensures that enough hot melt adhesive is always available -Dimensions: 480/220/H200 mm -Weight: 30 kg/unit

Kondisi: bekas, Gluing unit, gluing part, gluing head, heating basin for edgebander, edgebanding machine, pre-melting unit with granulate hopper -With the pre-melter, you always have sufficient hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm Lhodped Dt Rzofx Ac Hok -Weight: 20.3 kg

Tahun pembuatan: 2017, Kondisi: bekas, Mesin pembuat kotak Kolbus DA 270 Bookjet Edition Tahun: 2017 Dilengkapi dengan: - Sistem Copilot dengan layar sentuh - Rak papan untuk pemuatan manual - Pengumpan kain untuk operasi tanpa henti dengan rak tumpukan, tinggi tumpukan maksimum 160 mm - Kontrol kain yang hilang selama proses pemisahan - Sistem penumpuk dengan konveyor rol setelahnya - Stasiun perekatan yang dapat dipindahkan untuk memproses lem panas dengan unit persiapan lem di dalam pra-pemanas, rol aplikasi lem yang dipanaskan, dan rol pengikis - Silinder kain dengan penjepit dan pelat yang dapat diganti untuk bantalan karet (termasuk 5 x 500 mm, 5 x 720 mm, dan 10 x bantalan karet) - Perangkat kontrol viskositas untuk suplai air otomatis untuk memastikan viskositas lem yang konstan dengan pompa dan tangki air untuk pengisian manual - Perangkat untuk pelapisan bagian dalam dengan lem panas - Perangkat rol penekan untuk penyambungan bebas lipatan pada bahan sampul dengan papan dan strip punggung - Perangkat untuk membuat kotak berlapis Lsdpfx Acjzhwu Ej Hjhk - Penghitung kotak otomatis - Pengaturan otomatis yang dapat diprogram, penyesuaian termotorisasi, indikasi kesalahan produksi - Permintaan kotak tunggal untuk tujuan kontrol yang dilakukan dari sisi pengoperasian - Teknologi penggerak yang dikontrol servo berdasarkan Siemens SIMOTION D Peralatan khusus: - tanpa perangkat rol strip tengah (opsional, tersedia!) - Dengan rak strip tengah papan, tinggi papan minimum 130 mm - Perangkat pemotong strip tengah papan (strip tengah silang) untuk memproses produk cetak digital dengan strip tengah yang bervariasi, perangkat untuk memotong strip papan tengah yang kaku sesuai lebar, dengan kemungkinan variasi lebar dari satu siklus ke siklus berikutnya - Perangkat Pembalik Kolbus WE 260, tahun 2017 (penghitung: hanya sekitar 4,7 juta kotak buku) Spesifikasi teknis: - Kecepatan mekanis: hingga 65 siklus/menit - Ukuran sampul terbuka maksimum: 670 x 390 mm - Ukuran sampul terbuka minimum: 205 x 140 mm - Lebar sambungan: 4 - 15 mm - Lebar punggung: 14 - 120 mm - Lebar lipatan tertutup: 8 - 15 mm - Lebar kain: 223 - 708 mm - Tinggi kain: 130 - 428 mm - Ketebalan papan: 1 - 4 mm - Lebar papan: 95 - 328 mm - Tinggi papan: 140 - 390 mm - Ketebalan strip tengah papan: 1 - 4 mm - Lebar strip tengah papan: 6 - 90 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, de-Biesse Akron 1330 A Kantenanleimmaschine Einseitige Kantenanleimmaschine AKRON 1330-A Leimauftragseinheit SP03 Kappenaggregat IT03 Feinfräsaggregat RF02 Eckenrundungsaggregat AR02 Vorfräsaggregat RT02 mit symmetrischen Diamantwerkzeugen H=45 mm Z=2+2 30° inklusive. Kantenzieher RB02 (Werkzeuge nicht enthalten). Leimfugenzieher RC02 Bürsteinheit SZ02 Zusätzliche seitliche Plattenauflage Set zur Installation des Plattenrückführsystems Manuelle Zuführung für schmale Werkstücke Satz zum Bearbeiten von „Shadow Line“-Profilplatten Geradliniger Lufttisch am Maschineneinlauf Antihaftmittel-Einheit ADZ02 Paar diamantbeschichtete Fräser H=65 mm Z=2+2 30°, als Ersatz für Standardwerkzeuge. Hybrid-Leimtopf für EVA/PUR-Granulatleim anstelle des Standardsystems TM15 Hybrid-Vorschmelzgerät für EVA/PUR-Leim Adaptive Infrarotlampe AdIRL-700 AX-4, NC-Achse am Feinfräsaggregat PRO-NESTING-KIT für Feinfräsaggregat Paar Multifunktionsfräser für Feinfräsaggregat: Fase 25°, R=2 mm + R=1 mm, gerade für Massivholz AX-2, NC-Achse am Eckenrundungsaggregat Nur Rundungsfunktion Schiebeeinheit für Eckenrundungsaggregat Paar Fräser R=2 mm für Eckenrundungsaggregat Paar Fräser R=1 mm für Eckenrundungsaggregat AX-4, NC-Achse am Kantenzieher PRO-NESTING-KIT für Kantenzieher Paar Messer R=2 mm für Kantenzieher Paar Messer R=1 mm für Kantenzieher Reinigungseinheit LPT02 (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Lhsdpfx Aeyyb Icsc Hok Die besten Holzbearbeitungsmaschinen aus den Niederlanden/Holland De beste gebruikte machines uit Nederland

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 34 kW (46,23 hp), tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure shift-free transport. Panel conveyor Long, heat-treated semicircular guide rail allows perfect contact with the conveyor, with zero play. The conveyor is fixed to the machine frame for stability when handling wide panels, with a maximum extension width of 600 mm. Narrow parts package Feed package for narrow components, ensuring minimum edge width of 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43 mm height. Two pneumatically controlled motors (2 x 3.7 kW), intermittent edge milling on the panel. Panel preheating unit x2 Heats the workpiece edge so the adhesive melts properly—ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel end for better bonding. Edge band support x2 Large support, optimally positioned for easy feeding and long service life. Edge band cutting unit x2 Pneumatically operated guillotine with electric switch for precise end trimming of the edge band. Premelt glue application unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps adhesive fresh. Automatic glue pumping + 25kg tank Glue is automatically pumped to the upper reservoir when levels fall below the sensor. Edge band cutting unit Pneumatically operated guillotine with electric switch for precise trimming at the end of the edge band. 2 sets of pressure rollers One 100 mm pre-press roller combined with four trailing rollers ensure secure pressing. Lubrication system Lodpfxsy Rlbnj Ac Hohk Lubrication pump for daily maintenance, greasing the guide rail with a simple lever action. End trimming unit Linear guide structure at 45°, with 2 motors of 0.35 kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is virtually zero. R1.5 diamond knives. Corner rounding unit Designed for rounding the edges of the edge band at ends and along the length to achieve circular radius R. 2 scraping units with pneumatic movement Two sets, each with different radius knives (one set R1.5, the other R1). Extraction system Each unit has an independent extraction port (125 mm), total 6 ports. Glue scraping and cleaning unit (straight) Removes edge band debris, followed by straight scraping to remove adhesive residue from the top and bottom surfaces. Spraying unit – cleaning agent Separation agent applied before pre-milling prevents glue from sticking to the panel surface. 2 sets of polishing units Designed for two glue colors (dark and light) to avoid contamination. Solution for narrow parts Allows processing of workpieces: 120x120 mm (all 4 sides), 200x40 mm (long side), 40x200 mm (short side). Additional conveyor roller Solid support for large or inline panels. PUR device 2KG/20KG – 6,500 EUR + VAT Temperature control system with touch screen and even heating. Polyurethane (PUR) adhesive technology ensures superior bonding performance.

Kondisi: bekas, Tahun pembuatan: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18”) Year of manufacture: 2009 Consisting of Gathering Machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 12 - ASIR optical signature recognition: III - ASAC signature thickness control Lodpfxexdx Tne Ac Hshk - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Portal system: Pfaff (yr 23) - Pump - Set-up module: 3641 - Delivery for incomplete products: 3714 - Intermediate module with vibration: 3643 - 2x - Transfer to perfect binder Perfect Binder Müller Martini Corona C15 S/35 (18”) Year of manufacture: 2009 Description: - Semi-automatic adjustment - Commander with touchscreen - Main milling station - 1st spine processing station - 2nd spine processing station - Brushing station - Exclusive dust extraction (machine was connected to central dust extraction system) - Drive station for 1st spine glue unit - 1st hotmelt spine gluing unit, interchangeable - Premelter for spine glue unit: ICS C80 - Drive station for 2nd spine glue unit - 2nd hotmelt spine gluing unit, interchangeable - 2nd premelter for spine glue unit: ICS C160 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Premelter for side gluing unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping station - 2nd nipping station - Laydown device Conveyor Section - Delivery for incomplete products Three-Knife Trimmer Müller Martini Zenith S (3672) Description: - Color monitor with touchscreen - Semi-automatic adjustment - Infeed from the right - Stacking counter - Knife presetting device - Total number of knife sets: 2 - Interchangeable cutting cassettes (standard set): 4 – 17 Book Stacker Müller Martini CB 16 (3631) Description: - Compensating book stacker - Delivery to left and right

Kondisi: bekas, Tahun pembuatan: 2007, Müller Martini Acoro A7 Year of manufacture: 2007 / 2000 / 1999 Comprising: Gathering Machine Müller Martini 3693 Year of manufacture: 2007 Description: Lhodpfek H Sfhsx Ac Hsk - Chain tensioning station - Manual feed station - Number of gathering stations: 15 - ASIR optical signature recognition: III - ASAC signature thickness control - PIAB compressed air converter to vacuum - Delivery station for incomplete products: 3715 - Intermediary unit - Book block feeder: 3642 - Transfer to perfect binder Perfect Binder Müller Martini Acoro A7 - 3027 - 22 Year of manufacture: 2007 Description: - Semi-automatic adjustment - Color monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction, machine was previously integrated with central dust extraction system - Drive station for spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: ICS C80 - 1st PUR spine gluing unit, interchangeable (Düsen) - Premelter for PUR spine gluing unit: Meler Micron Pur - Drive station for 2nd spine gluing unit - 2nd hotmelt spine gluing unit, interchangeable - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Premelter for side gluing unit - Drum cover feeder - Creasing station - Pump(s) - 1st pressing station - 2nd pressing station - Laydown device Conveyor System Müller Martini Description: - Transport system, length (approx.): 60 m - Emergency delivery Three-knife Trimmer Müller Martini Merit S - 3671 Year of manufacture: 2000 Description: - Digital display - Infeed from the right - Automatic magazine for inline production - Knife pre-setting device - Total number of knife sets: 2 - Interchangeable cutting cassettes (standard set) Book Stacker Müller Martini CB 16 - 3631 Year of manufacture: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Tahun pembuatan: 2021, Kondisi: bekas, MÜLLER MARTINI Book Casing-in Machine EMP 513 Type K317 Year of manufacture: 2021 For casing-in straight book blocks into hard covers, followed by pressing and joint forming. Designed for use as a stand-alone machine. Equipment: - Copilot system with 2x touch-screen monitors - Block feed via register belt and star feeder - Cover pre-stacking belt - Cover magazine - Cover bending unit - Cover forming station - Casing-in gluing unit with profile rollers and adjustable double glue application for the joint area of the book - Glue recirculation system with pump - EMP glue pump monitoring - Book and brochure clamp - Electrically heated joint forming rails, paired and individually controllable via regulator, 15° - Quick-change system for joint forming rails - 2 pressing stations - Heating monitoring - Servo-driven drive system based on Siemens SIMOTION D - Left-hand delivery, book transport lying flat Optional equipment: - Bottom divider with switchable separating roller for processing photo books - Hotmelt nozzle application for joint gluing - NORDSON pre-melter - Code-matching (comparison) from block to cover via Datamatrix code, barcode sensor: Cognex camera - Double cover control - Equipment for processing flexible covers Technical specifications: Mechanical performance: up to 30 cycles/min Book block format range max.: 280 x 375 x 80 mm Book block format range max.: 305 x 375 x 30 mm Book block format range min.: 100 x 100 x 2 mm Open cover format range max.: 660 x 385 mm Open cover format range min.: 210 x 105 mm Lsdoyr Hk Sepfx Ac Hshk Open cover thickness max.: 7.0 mm Open cover thickness min.: 0.1 mm Finished book format range max.: 285 x 385 x 90 mm Finished book format range max.: 315 x 385 x 30 mm Finished book format range min.: 105 x 105 x 6 mm KOLBUS Conveyor Belt System Year of manufacture: 2021

Tahun pembuatan: 2006, Kondisi: bekas, ketebalan tepi (maks.): 12 mm, kecepatan pemakanan sumbu X: 40 m/menit, tinggi pelat: 60 mm, panjang pelat: 2.400 mm, lebar pelat: 1.000 mm, nomor mesin/kendaraan: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package comprises four machines, configured as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel sizing/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure section Panel support guides NC positioning Panel infeed alignment system Panel sizing/milling units Unit 1: Pre-milling unit Automatic sequenced engagement NC positioning unit Unit 2: Double trimming unit top and bottom Model: KD 10 Lhjdpey Ur Hlofx Ac Hok Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatic sequenced engagement NC positioning Gluing and edging system Number of edge magazine positions: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool changer NC positioning Edge processing unit 5: Milling/roughing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool changer NC positioning Edge processing unit 6: Edge scraper blade NC positioning Edge processing unit 7: Glue scraper blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejector Panel feeder The machine will be sold and delivered in its actual physical and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, berat keseluruhan: 80 kg, arus masuk: 11 A, Condition: Practically NEW – only used as a demonstration unit (see photos of the exceptionally clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only the required amount of adhesive is melted – prevents PUR adhesive from burning. Compressed air/protective gas: Operation requires dried compressed air or CO2 (essential for PUR processing) Operation: Simple and robust membrane keypad Lhodoy D Hfzopfx Ac Hek Electrical connection: 3LPE 400V 50/60Hz Rated power (Pmax): 4200 W Maximum current (Imax): 11 A Weight: approx. 80 kg (manufacturer's specification) Protection class: IP32 The unit is fully functional, extremely clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approximately 50 km from the German border / Waidhaus) Keywords / Suitable for systems of: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge processing machine, PUR adhesive, pre-melter, profile wrapping.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Stefani Ibimatic Double Edge Bander Year: 1998 S/N: NH 002993 Manufacturer: Stefani S.p.A., Italy Edge Banding: min/max 14-65 mm Thickness: min 0.3 mm Max ABS size: 3 x 35 mm Panel thickness: min/max 60 mm Panel size: 220-3200 mm Working edge: 30-75 mm Distance between edges: 400 mm Adjustable feed speed: 6 to 36 m/min Units included: 1+1 Pre-milling units, 4 kW, pneumatic 1+1 Air blast unit for cleaning workpieces 1+1 Gluing station / hot-melt adhesive unit GR_HMP-P HM-P EDGE GLUING DEVICE FOR STRAIGHT EDGES Designed for bonding straight panel edges using a hot-melt adhesive with removable tank Tank and pre-melter for rapid melting The unit includes: A Adhesive tank Lhedjtrgy Nspfx Ac Hsk B Strip holding table C Pneumatic equipment box D Support base for strip storage E Guillotine shear F Side pressure unit G Glue unit inclination adjustment H Mobile tabletop 1+1 Edge strip feeder, 5-station 1+1 End trimming unit 0.35 kW, 12,000 rpm 1+1 Corner copying unit, 1 kW, 12,000 rpm 1+1 Chamfering unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 Edge rounding unit with two 0.35 kW motors 1+1 Trimming unit, 4 kW, right side, left side empty (U28+U55), diameter 125 mm, 12,000 rpm 1+1 Self-adjusting scraper RCA 95 1+1 Brush/buffing unit 0.29 kW, 1,500 rpm SPO (150/50 x 50 mm) 1+1 ABS strip color brightener, 1,600 W

Kondisi: bekas, Tahun pembuatan: 2014, Glue unit Meler PUR Year of manufacture: 2014 Suitable for connection to: Kolbus KM 473 Lhsdjuliqyopfx Ac Hjk PUR spine gluing unit Premelter for PUR spine gluing unit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, PUSAT PERMESINAN DAN EDGE-BANDING CNC, IMA BIMA 410 V SPESIFIKASI UMUM: Dimensi kerja efektif: 4000mm x 1200mm x 100mm Kecepatan maks. sumbu X: 100 m/menit Kecepatan maks. sumbu Y: 100 m/menit Kecepatan maks. sumbu Z: 25 m/menit 2 area kerja 8 batang geser SCHMALZ 23 cangkir vakum SCHMALZ 4 pengangkat panel Pompa vakum SIEMENS UNIT MILLING: Terletak di kiri jembatan bergerak 10 HP, 0-20.000 rpm dengan INVERTER Sumbu C 360° Pendinginan cairan Pergantian alat otomatis, tipe koneksi HSK F63 Penyimpanan rotari untuk alat berukuran besar, 12 posisi UNIT BORING pada X: Terletak di kiri jembatan bergerak 7 spindle bor vertikal independen Penggerak sabuk bergerigi berkecepatan tinggi, 9000 rpm Motor independen UNIT BORING pada Y: Terletak di kiri jembatan bergerak 5 spindle bor vertikal independen Penggerak sabuk bergerigi berkecepatan tinggi, 9000 rpm Motor independen UNIT EDGE-BANDING: Terletak di kanan jembatan bergerak Ganda penyimpanan edge-band Pergantian edge-band otomatis Unit lem hot melt Gergaji untuk pemotongan edge-band sesuai ukuran Lhsdpfxszc E A Is Ac Hsk Agregat trimming atas/bawah Ganda agregat pemotong sisa edge dan lem PROGRAMMER NUM KONTROLER IMATRONIC SOFTWARE IMAWOP Perlindungan keamanan: tikar pengaman, pintu pembuka tertunda, dll. Kesesuaian standar keamanan CE SEPENUHNYA SUDAH DICEK, SIAP DIGUNAKAN

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness, coil (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Ledpfxewxwyfo Ac Hohk Safety and noise protection cabin Cam spacing (mm): FORMAT PROCESSING (for each side): Sprayer unit (for liquid non-stick agent) Protection milling unit (pre-milling) 1 x 4.5 kW Chipper KD 11 (2 x 6.6 kW) — free slot EDGE BANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for coils (slot No. 6) End trimming unit HL84 (2 x 0.22 kW) 0°-30° Pre-milling unit (2 x 0.55 kW) Contour trimming unit (for fine trimming) CNC-controlled FK 13 (2 x 0.4 kW) turret 8+8 Free slot Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scrapers + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW)

Kondisi: sangat baik (bekas), Double-sided machine (First machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 195 / 1500 Control: PC 22 / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin FORMATTING UNITS (per side): Lodpfxewxwxbo Ac Hjhk Spraying unit (for liquid anti-adhesive) Chipping unit KD 10 (2 x 6.6 kW) Free space EDGE BANDING SECTION (per side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) type A Edge magazine for rolls (compartment no. 6) Universal milling unit for grooving/rebating and profiling SF 20 (HSK63F - 4.5 kW) 0°-90° CNC Horizontal Pre-milling unit (2 x 0.55 kW) Milling unit MF 21 (2 x 0.55 kW) Multi-profile scraping unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in roll (min/max) mm 0.3 / 3 Lhodpfx Asd Scydec Hek Panel thickness (min/max) mm 8 / 60 Control system: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid release agent) Adjustable fence, CNC controlled Jointing milling unit with CNC-controlled pressure zone 08.379 (4.0 kW x 2) Glue application unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (compartments no.): 6 End trimming unit 08.42/30/B (0.2 kW x 2), max. 30 m/min (0°-25°) Milling unit 08.0587 (1.0 kW x 2), 4 profiles Multi-function unit (corner rounding and profile milling unit) KFA 20 (0.5 kW x 1), max. 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (0.18 kW x 4) Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1) 90°/180°/270° CNC

Kondisi: seperti baru (mesin pameran), LEFT-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 - in strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser - max 44) Control ICOS Open Feed speed m/min (adjustable) 16 - 30 Lhjdpfx Ajgbug Nec Hsk Pressure beam driven by V-belt Spraying unit (for liquid release agent) Adjustable fence, CNC-controlled Panel infeed system 700.101 (mm 500 x 500) Jointing unit with CNC-controlled 08.379 (kW 4.0 x 2) edge pressure zone (CNC-controlled) Gluing section (P.U.R. glue + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spraying unit (for separating liquid) Pressure zone + edge magazine for rolls (compartment No.) 6 Linear end trimming unit 08.428 LKA V30/2 (kW 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC-controlled) 08.0587 (kW 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC-controlled KFA 20 (kW 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-4 (kW 0.18 x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (kW 4.5 x 2) 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material Lhsdow A Ruqspfx Ac Hok OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: bekas, Tahun pembuatan: 2011, Thread sewing machine with inline endsheet feeder MECCANOTECNICA UNIVERSE Year of manufacture: 2011 For high-quality digital print finishing. The UNIVERSE SEWING completes 3 operations in standard mode: Feeding flat sheets, scoring, folding and gathering, as well as stitching. The UNIVERSE endsheet feeder completes 2 operations: Pressing the fold and gluing the endsheets. Equipment: • Flat sheet feeder • Siemens PC with touchscreen • GigaLynx signature recognition • Folding and gathering station • Thread sewing machine • Band delivery • Transfer to endsheet feeder • Fold press Lsdpfx Acou Utzyj Hehk • Endsheet feeder with hotmelt nozzle application and ROBATECH premelter • Delivery belt (Counter reading approx. 9,700,000 sewn products) Technical Specifications: Flat sheet feeder speed: up to 300 flat sheets (A4)/min Mechanical sewing speed: up to 50 folded sheets/min Max. flat sheet size: 420 x 640 mm Min. flat sheet size: 150 x 200 mm Max. folded sheet size: 420 x 320 mm Min. folded sheet size: 150 x 100 mm Max. number of stitches: 10 ...

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. Ljdpfx Aeyxndbjc Hehk External reference: 7673

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 6.500 h, Fungsionalitas: berfungsi sepenuhnya, Zusammentragmaschine_MullerMartini Lodpfxjyufk As Ac Hshk

Kondisi: sangat baik (bekas), Flexible batch size 1 production and single-sided edge banding line (right) Consisting of the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x Kw 3) DOUBLE gluing unit (PUR glue + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (12 compartments) End trimming unit WK13 (CHAMFER / STRAIGHT, automatic adjustment) Pre-milling unit (2 x Kw 0.55) pneumatic adjustment Multifunction profile milling unit (CNC-controlled) MF 21 (2 x Kw 0.55) Profile copying milling unit FF 32 (4 x Kw 0.4) with automatic changeover device Contour trimming unit (for fine milling), CNC-controlled FK 31 (30 m/min) recently added after a technological retrofit Multi-profile scraping unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbeting and profiling UF 11 (1 x Kw 4) Lhedpjinigmofx Ac Hok M.03) LOADING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a production line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 Cam spacing (mm): 500 FORMATTING UNIT (per side): - Protection milling cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) - 2 x Hogger heads DT 10 (2 x approx. 5.8 kW) - Spray unit for liquid anti-adhesive Ljdpfoywk Elex Ac Hshk EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue + premelter) SP30 (High Melt + Edge Control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for coils (No. 6 positions) - End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°–25° - Multifunctional unit (radius milling and contour milling) AR 30 (2 x 0.35 kW) - Left: 2 x Universal milling units for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0°–90° - Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x approx. 5 kW) 0°–90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 – spray aggregate (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower – edge trimmer PH 10 OPTION: D.O.M. stacker with carrier column and mobile jib (with vacuum suction cups) for unloading and stacking edge-processed panels.