Beli Pro Cool bekas (88.160)

Kondisi: baru, EN-ME-LINE – Air-cooled dehumidifiers are used for air drying at relative humidity (RH) levels up to 100% at temperatures of +45°C and above. EN-EU-LINE – Air-cooled dehumidifiers are used for air drying at relative humidity (RH) levels up to 100% at temperatures from -30°C to +40°C. Rust is the adversary of freshly blasted steel; high humidity combined with low steel temperatures creates ideal conditions for moisture condensation on the newly blasted surface. Flash rust is a major cause of premature coating failure. By reducing the relative humidity, Proton dehumidifiers are engineered to provide the optimal climatic conditions for blasting operations. Climatic conditions worldwide vary greatly, from cool and damp in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various technological approaches can be employed in the dehumidification process; certain dehumidification technologies perform more effectively than others when managing specific climatic conditions. Each Proton dehumidifier is manufactured to the highest quality standards and comes with regional certification. At the heart of the dehumidifier is a highly efficient and robust metal silicate rotor. The rotor contains numerous air channels aligned parallel to the shaft, ensuring a large internal surface area for adsorption of water vapor. The rotor is not affected by oversaturation, allowing the PROTON dehumidifier’s rotor to withstand long-term storage in high humidity environments without any loss of capacity. The PROTON dehumidifiers are specifically designed for corrosion protection in conjunction with sandblasting and painting operations, to preserve materials and prevent moisture-related problems. They meet the following requirements: • Available in sizes from 1,000 m³/h to 18,000 m³/h dry air capacity. • Available in precooled and postcooled versions for warm climates. • Robust construction with steel frame, lifting eyes, etc. • Key components can be easily serviced and replaced. Iodpfjkw Ukuox Ab Iea • Large air intake grilles and filters. • Can be installed in containers for protection. • Adjustable dehumidification capacity and air outlet temperature in 4 stages. • Suitable for indoor and outdoor use. • Dry air pressure up to 1200 Pa. Technical Specifications: Dehumidifiers are available with airflow rates from 1,000 m³/h to 18,000 m³/h. PROTON dehumidifiers reduce the relative humidity (RH) from 90% to 10–15%. Dehumidifiers can remove up to 100 liters of water per hour.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, daya laser: 30.000 W, jarak pergerakan sumbu X: 3.050 mm, jarak lintasan sumbu Y: 13.050 mm, jarak gerak sumbu Z: 450 mm, akurasi pemposisian: 0,03 mm, akurasi pengulangan: 0,02 mm, berat benda kerja (maks.): 2.000 kg, tegangan masuk: 380 V, frekuensi input: 50 Hz, panjang total: 16.800 mm, lebar total: 2.200 mm, tinggi total: 5.120 mm, masa garansi: 24 bulan, jangkauan kerja: 13.000 mm, Perlengkapan: unit pendingin, de Iedpfx Aov Hnl Asb Iea

Kondisi: baik (bekas), Cool compact sandwich preparation station 2-door preparation station with GN containers mobile on wheels granite worktop Dimensions W x D x H 107 x 70 x 113 cm Isdelkbccopfx Ab Iea Preparation stations – new and used – available in our shop! International shipping rates on request!

Kondisi: baru, CNC hydraulic guillotine shear New machine Manufacturer: UMS Model: PRO. 3100 x 13 CNC Technical data: Cutting length: 3100 mm Sheet thickness (42 kgf/mm²): 13 mm Sheet thickness (70 kgf/mm²): 8 mm Cutting angle: 0.5 – 3 degrees Number of hold-downs: 15 Cybelec Cybtouch 8 Monoblock steel welded construction Automatic blade gap adjustment Table with ball transfer rolls High-quality, hardened and ground upper and lower blades Front light barrier (sheet metal guiding) Adjustable stroke Isdpfx Aenl D Tfob Ija 1 m front support arm with scale 1 m front support arms (2 pcs.) Rear light barrier (sensor distance 10–16 mm) Cutting line illumination Motor: 30 kW Throat depth: 180 mm Cutting speed: 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump by original Eckerle Electrical components by Siemens Operating manual in German Table height: 900 mm Overall dimensions (W x L x H): 3840 x 2830 x 2180 mm Total weight: 11,000 kg Plus commissioning, training, and transport Delivery time from order: approx. 70 days

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), Technical Data Manufacturer: ZEISS Model: Pro Year of manufacture: 2003 Double-column CMM Measuring Table X = 6000 mm Y = 3000 mm The machine can be upgraded with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively at professional customers. (Specifications, information, and prices are subject to change and prior sale excepted!) Ijdpfx Abjgmpgxj Ija

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1904P201, Tahun pembuatan: 2019, panjang total: 1.950 mm, tinggi total: 1.790 mm, lebar total: 2.430 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 1.500 kg, tegangan masuk: 380 V, arus masuk: 16 A, frekuensi input: 50 Hz, daya: 5,8 kW (7,89 hp), For sale is a BigRep-PRO, which unfortunately has not received the attention and use it deserves with us and has become oversized for our purposes. We purchased the unit directly from the manufacturer, and it has been fully serviced and maintained by professional technicians from BigRep GmbH to ensure everything is in optimal condition before selling. The only issue, as visible in the pictures, is the window on the left door, which we had to replace after the original was accidentally damaged. This is purely a visual flaw and does not affect functionality or performance in any way. Otherwise, the entire unit is still wrapped in the manufacturer’s protective film, as clearly shown—it’s practically in factory-new condition. Isdsv In Hcjpfx Ab Isa Depending on the agreement, we can also include a considerable amount of filament (approximately 15 large spools). The machine can be inspected and tested on site by appointment. For further questions or inquiries, please feel free to contact us directly.

Kondisi: bekas, Tumbler Iglu Scheid mit Kühlung Volumen: 250 Liter Abmessungen: 140x120x195 cm Anschlussleistung: 6,5 kW / 13 kW Ijdon Nw R Rjpfx Ab Isa

Kondisi: baru, Tahun pembuatan: 2025, Technical data: Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, 2 ms sampling time, optional RTCP tool-tip tracking, correction map Working area: X 600–3000 mm, Y 900–12000 mm Gantry clearance and Z-axis range: 100–1000 mm Drive system: Omron servo drives with EtherCat protocol. X, Y axes: Precision class 6 hardened, ground helical racks Z axis: Precision class 5 ball screw Linear bearing system: Bosch Rexroth 25 trapezoidal rails Traverse speed: Up to 120 m/min Acceleration: Up to 1G Software resolution: up to 0.0001 mm Ijdpen Hq Huofx Ab Iea Positioning accuracy: 0.01 mm Gantry drive: Dual-side master/slave with gantry angle correction Electrospindles: Up to 36 kW, powered by frequency inverter Tool taper: ISO30 or HSK63 ER32 Maximum electrospindle speed: 24,000 rpm (optionally 6,000 / 40,000 / 50,000) Construction: Welded, ribbed, stress-relieved, and precisely machined steel structure Equipment options: - Material positioning and correction via camera, laser, or touch probe - Linear or carousel tool magazine - Tool cooling with mist or chilled air - 3D laser or touch probe scanner - Positioning stops - Additional angular/rotary axes - Drilling units, angular heads - Oscillating, rotary, drag, creasing, and pen tools - Pneumatic workpiece clamps - Chip extraction system - Integration with industrial robot Table type: T-slot table: aluminium profiles, solid aluminium, solid steel; vacuum; hybrid; pneumatic workpiece clamps #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Kondisi: sangat baik (bekas), 8.60 m Bito pallet racking The pallet racking system by Bito is designed with a bay length of 2,700 mm, allowing for up to three pallets to be stored lengthwise in each bay. Isdewgichjpfx Ab Ioa To facilitate flexible assembly with various shelf spacings, the individual levels can be adjusted in height in increments of 50 mm. The beams are coated in gentian blue plastic and equipped with captive safety pins. For optimal corrosion protection, the surfaces of the upright frames are bright-galvanized. Technical Data: Manufacturer: Bito Rack height: 4,500 mm Rack depth: 8,600 mm Rack length: 11,400 mm Bay width: 2,700 mm Storage direction: lengthwise storage Number of bays: 3 Max. pallet weight: 600 kg Upright type: P2 Euro pallet storage capacity: 36 Number of storage levels: 4 (including floor level) Max. shelf load: 1,800 kg Max. bay load: 5,400 kg Colour: Uprights galvanized, beams plastic coated RAL 5010 Gentian blue Scope of delivery: 04 x uprights 4,500 mm high / 110 cm deep, bay load 5,400 kg, bright-galvanized 18 x beams 2,700 x 110 x 50 mm, shelf load 1,800 kg, gentian blue You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1904P201, Tahun pembuatan: 2019, No reserve price – guaranteed sale to the highest bidder! Maintenance regularly performed by BigRep GmbH specialist personnel TECHNICAL DETAILS Nozzle size: 0.6 mm Layer height range (for 0.6 mm nozzle): 0.1 mm – 0.4 mm Max. output (with 0.6 mm nozzle): 16 mm/s Extruder: Two MXT extruders with 0.6 mm and 1 mm nozzles Print Area Build volume (X × Y × Z): 1,005 × 1,005 × 1,005 mm Layer height resolution: 0.1 mm – 0.8 mm Acceleration: up to 10 m/s² Printing technology: FFF – Fused Filament Fabrication (material extrusion) Printing materials: ASA, PA66 (additional materials in development) Support materials: soluble plastics Max. heated bed temperature: 99 °C MACHINE DETAILS Printer (L × W × H): 1,950 × 2,430 × 1,790 mm Printer weight: 1,500 kg Installation Requirements Floor: level and even Safety clearance: 2 m around the machine (with doors closed) Required floor load: 500 kg/m² User: operator must be trained Operating temperature: 18 °C to 25 °C Relative humidity: 30 to 70% (non-condensing) Exhaust diameter: 100 mm Electrical Isdpfxewpqm Ho Ab Isa Connection configuration: 3 × AC 400 V, 50/60 Hz Connections: CEE socket (400 V, 16 A), LAN network (RJ45) Input current: 16.0 A Power consumption: 5,800 W Safety certifications: CE-certified EQUIPMENT - 15 large filament rolls - Packaging: original manufacturer’s film

Kondisi: baru, Tahun pembuatan: 2025, Technical Data Control System: Multi-axis real-time interpolator with active trajectory forecasting, LAN and EtherCat connectivity, sample time under 2 ms, correction map, RTCP, remote service access. Working Area: X: 2500 – 4000 mm, Y: 6000 – 12000 mm Z-Axis Clearance: 300 – 700 mm Drive System: Servo drives with EtherCat protocol. X, Y axes equipped with hardened, ground helical racks (accuracy class 6). Z axis utilizes ball screw (accuracy class 5). Linear Bearings: Trapezoidal guide rails. Traverse Speed: Up to 80 m/min Software Resolution: Up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: 12 kW to 50 kW, inverter-driven Iodpfx Aben Sk Huo Isa Tool Taper: ISO30 or HSK63 ER32 Maximum Electrospindle Speed: 24,000 rpm (options: 6,000, 40,000, 50,000) Construction: Welded steel frame, ribbed, stress-relieved, precision-machined Table Type: Aluminium T-slot, aluminium raster, solid aluminium, or solid steel Optional Equipment: - Material positioning and correction via camera, laser, or probing systems - Linear or turret tool changers - Tool cooling with oil mist or chilled air - 3D laser or touch scanner - Positioning bases - Additional rotary or angular axes - Drilling and angular aggregates - Pneumatic clamping systems - Workpiece marking - Integration with industrial robots - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #router #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Kondisi: sangat baik (bekas), 17.10 m Bito pallet racking The pallet rack from Bito, featuring a bay length of 2,700 mm, is designed to accommodate up to three pallets placed lengthwise per bay. For flexible assembly with various shelf spacings, the individual levels can be adjusted in height in fine 50 mm increments. The beams are finished with a gentian blue plastic coating and equipped with captive safety clips. For optimal corrosion protection, the upright frames have a high-gloss galvanized surface. Technical Data: Manufacturer: Bito Rack height: 5,000 mm Rack depth: 1,100 mm Rack length: 17,100 mm Bay width: 2,700 mm Storage orientation: longitudinal Number of bays: 6 Max. pallet weight: 600 kg Upright type: P2 Isdpfx Abewgiago Ioa Storage capacity (Euro pallets): 72 Number of storage levels: 4 (including floor space) Max. shelf load: 1,800 kg Max. bay load: 5,400 kg Colour: Upright frames galvanized, beams plastic-coated in RAL 5010 Gentian Blue Scope of delivery 07 x frames, 5,000 mm high / 110 cm deep, bay load 5,400 kg, high-gloss galvanized 36 x beams, 2,700 x 110 x 50 mm, shelf load 1,800 kg, Gentian Blue Further articles in other sizes – new and used – can be found in our shop! International shipping rates on request!

Kondisi: baru, Tahun pembuatan: 2025, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with hardened, ground helical racks (accuracy class 6), Z axis with ball screw (accuracy class 5) Linear guides: Bosch Rexroth 35 Travel speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Isdpon Nv H Sefx Ab Ioa Programmable resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-sided master/slave with portal angle correction Electrospindles: 8 kW to 36 kW Spindle inverter: yes Maximum spindle speed: 24,000 rpm (options: 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved, precision machined steel frame Table type: vacuum, hybrid, steel, or aluminium table with M16 or M18 threaded holes #plotter #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #plywood #chipboard #steel #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: sangat baik (bekas), 1990 cm Bito pallet racking The Bito pallet rack is designed with a bay length of 2700 mm to accommodate up to three pallets lengthwise within one bay. To allow for easy assembly with various shelf spacings, the individual levels are adjustable in height in a fine grid of 50 mm. The beams are coated with gentian blue plastic and equipped with captive safety pins. For optimal corrosion protection, the surfaces of the upright frames are bright galvanized. Technical data: Manufacturer: Bito Rack height: 5000 mm Rack depth: 1100 mm Rack length: 19900 mm Bay width: 2700 mm Storage orientation: Lengthwise storage Number of bays: 7 Max. pallet weight: 600 kg Upright type: P2 Storage capacity Euro pallets: 84 Number of levels: 4 (including floor storage) Max. shelf load: 1800 kg Max. bay load: 5400 kg Color: Upright frame galvanized, beams plastic coated RAL 5010 gentian blue Iedpswgh Uisfx Ab Isa Scope of delivery: 08 x upright frames 5000 mm high / 110 cm deep, bay load 5400 kg, bright galvanized 42 x beams 2700 x 110 x 50 mm, shelf load 1800 kg, gentian blue More items in various sizes – new and used – available in our shop! International shipping rates on request!

Kondisi: baru, Tahun pembuatan: 2025, Machine for processing sinks made from materials such as sintered quartz, granite, granite composites, and ceramic models, etc. Technical data: CNC ROUTER 1325 PRO+ WITH WORKING AREA 1300X2500MM Z AXIS RANGE: 700MM - PRO VERSION OMRON AC SERVO DRIVES HIGH SPEED (COMPLETE WITH PLANETARY GEARBOXES) 1.5KW ETHERCAT INTELLIGENT ENERGY REGENERATION INDUSTRIAL OSAI OPENSMART REAL-TIME CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT FOR UP TO 16 AXES, ETHERCAT COMMUNICATION WITH CONTROL CABINET AUTOMATIC GANTRY ANGLE CALIBRATION EUCHNER HBA-103037 HANDHELD UNIT CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRAL LUBRICATION WITH SKF GREASE BEAM SYSTEM WITH PNEUMATIC CLAMPS SINK FIXING SYSTEM Iodpjualqqefx Ab Ioa DUST EXTRACTION CHANNELS BALL SCREW PROTECTION ON Z AXIS BLOW-OFF SYSTEM FOR MOVING COMPONENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET #CNCrouter #CNC #millingmachine #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 330 t, Die Maschine ist zum Stanzen, Prägen, Ausbrechen von Abfall und Nutzentrennen konzipiert – verkauft im Ist-Zustand (as is). Ijdpeww E Nrsfx Ab Ioa Das System verfügt über einen Hochleistungs-Bogenanleger, der für einen vollautomatischen NON-STOP-Betrieb ausgelegt ist: • Für vollautomatisches Stanzen, Rillen und Prägen mit oder ohne Greiferrand • Zum Ausbrechen von Innenabfall sowie seitlichen und hinteren Bogenrändern • Für die stapelförmige Ablage gestanzter und ausgebrochener Bogen mit vorhandenen Greiferrändern oder • Für das Abtrennen der Greiferränder mit anschließender stapelförmiger Restbogenablage • Patentiertes Greiferwagen-Registersystem garantiert höchste Passergenauigkeit • Paketstapelmaschine ermöglicht vollautomatische Trennbogenzuführung sowie NON-STOP-Ablage, ohne Umrüstung selbst bei kleinformatigen Zuschnitten (Wechseltisch mit Kammstruktur) • Trennbogenmagazin mit elektrischer Vorratsüberwachung, während des Betriebs nachfüllbar • Centerline-Ausrüstung • Automatische Palettenwechselvorrichtung im Ablagebereich Spezifikationen: - Max. Bogenformat: 760 x 1060 mm - Min. Bogenformat: 350 x 400 mm - Maximale Stanzkraft: 3,3 MN (330 t) - Geschwindigkeit: 9.000 Bogen/h Verarbeitbare Materialien: - Papier ab 80 g/m² - Karton bis 2000 g/m² - Wellpappe bis 3 mm (max. Bogenkrümmung 4 %) Ausstattung: - Optische Bogenanlage (Dyset) - Automatischer Non-Stop Anleger - Ausbrechstation - Nutzentrennstation - Centerline - Vollautomatische Palettenwechseleinrichtung Ablage - Inklusive Podest - Schnellspannrahmen in allen Werkzeugstationen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosage volume: 136.1 cc Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Platen size: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Boy service in France It is possible to change the screw diameter to 32 mm or 42 mm Dimensions: Iodpfxsxz Af As Ab Ija Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pump/motor: 11 kW Heating power: 7.7 kW Total power: 18.7 kW All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2022, panjang total: 13.400 mm, lebar total: 2.460 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2021, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: baik (bekas), jarak tempuh: 54.868 km, daya: 106 kW (144,12 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, jarak roda: 3.280 mm, pendaftaran pertama: 07/2022, panjang ruang muatan: 2.220 mm, lebar ruang muat: 1.580 mm, tinggi ruang muatan: 1.350 mm, kelas emisi: Euro 6, warna: putih, kabin pengemudi: kabin harian, ukuran ban: 215/65R16, jumlah tempat duduk: 3, Tahun pembuatan: 2022, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci sentral, pendingin udara,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 07/2023, panjang total: 13.600 mm, lebar total: 2.600 mm, suspensi: udara, jarak roda: 770 mm, warna: putih, Tahun pembuatan: 2023, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: RTO-101871, jenis bahan bakar: diesel, produsen motor: -, de-001 Ijdpfxewvyuas Ab Ija

Tahun pembuatan: 2024, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G22SJ2408......., The iCombi Pro is the latest combi-steamer from RATIONAL. The iCombi Pro 20-2/1 Gas (natural gas H) model with 20 GN 2/1 or 40 GN 1/1 rack inserts is easy to operate even for untrained staff, as you can achieve outstanding food quality without the need for supervision. The unit has been tested in our in-house specialist workshop and is fully functional. Original gross list price: €49,182.70 Our price: €25,585 gross, year of manufacture 08/2024!! Isdpjxzqgnofx Ab Ija The images shown are actual, recent photos of the unit. The ultra-fast intermediate and self-cleaning functions keep your unit spotless. The combi-steamer is available from 48 kW onwards. You will receive an invoice with VAT shown separately. Condition: Used, tested and fully functional Technical specifications: Dimensions (W x D x H): 1082 x 1117 x 1872 mm Minimum door opening for transport (W x H): 1200 x 1900 mm Serial number: G22SJ2408..... Year of manufacture: 2024 Max. loading per rack: 5 kg Max. total loading: 100 kg Weight (gas version): 358 kg Electrical connection requirements: Voltage: 1 NAC 230 V Gas connection power rating: 80 kW Fuse protection: 16 A Water connection requirements: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Further information: Temperature range: 30°C to 300°C Detects actual cooking chamber conditions Recognizes size, load quantity and product condition to determine browning Learns and implements frequently used cooking routines Determines the optimal cooking process for the desired result MyDisplay – fully customizable, user-specific control panel TFT color display and touchscreen Operating and user manuals accessible on the device display Core temperature probe with automatic error correction in case of misplacement and positioning assistance Double-glazed, energy-saving door compartment LED interior lighting Includes energy consumption display Humidity regulation: precise percentage humidity measurement and adjustment Individual programming of at least 350 cooking programs with up to 12 steps each Steam injection adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system (no additional grease filter required) Cool-down function: rapid chamber cooling Our equipment service for you: 6 months’ warranty on all electrical parts High-quality branded equipment at fair prices Professional and competent advice – before and after purchase Flexible shipping or self-collection options Provision of operating instructions, wiring diagrams & spare parts Trade-in of your combi-steamer from year of manufacture 2004 onwards Full range of accessories at attractive prices The iCombi Pro by Rational sets a new benchmark in intelligence, efficiency, and flexibility. Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior agreement

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosage volume: 136.1 ccm Clamping Unit: Clamping force: 55 t Tie bar distance: 360x335 mm Platen size: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode 2 pneumatic core pulls Injection unit hardened – bimetallic The machine has been regularly serviced by the authorized Boy Service Partner in France It is possible to change the screw diameter to either 32 mm or 42 mm Dimensions: Weight: 2,430 kg Length/Width/Height: 3.25 x 1.14 x 2.02 m Ijdpfexz Afvox Ab Ioa Drive: Pump/motor: 11 kW Heating capacity: 7.7 kW Total installed power: 18.7 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 04/2021, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2021, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosage volume: 136.1 ccm Clamping unit: Clamping force: 55 t Isdpfx Absxz Afps Ija Tie bar spacing: 360x335 mm Platen size: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Boy Service in France It is possible to change the screw diameter to ø 32 mm or 42 mm Dimensions: Weight: 2,430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pump/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request