Beli Roti Cutter bekas (5.355)

Kondisi: sangat baik (bekas), Penawaran terdiri dari: Polar 78 N Plus, tahun pembuatan 2017, layar sentuh, kondisi sangat terawat Knsdpfx Adsxvbn Sowed

Kondisi: sangat baik (bekas), Mesin Frais Macmon M100 (setara dengan Deckel FP1) Kecepatan putar: 40-2000 rpm Pergerakan sumbu X: 310 mm Pergerakan sumbu Y: 170 mm Pergerakan sumbu Z: 340 mm Spindle taper: SK 40 Ulir penarik: S20x2 Ukuran meja: 600 x 215 mm Ukuran alur-T: 12 mm Berat sekitar 1120 kg Dimensi: 1066 x 1048 x 1330 mm Kodjwu Egxspfx Adwond Aksesori/Perlengkapan: - Lampu mesin - Digital readout 3-axis - Sistem pendingin cair - Buku manual operasi - Kaki mesin Mesin telah diperiksa secara teknis dan dalam kondisi baik. Backlash sumbu X: 0,1 mm Backlash sumbu Y: 0,1 mm Backlash sumbu Z: 0,2 mm Harga netto, free on truck dari gudang.

Kondisi: bekas, set_bestaht_aus_zwei_frasern Knedpfexvcgcsx Adwsd

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 23.000 h, Bobst SP 142 CER II Kjdpoxxypyjfx Adwond

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Untuk dijual guillotine Boway R5670V2. Mesin dalam kondisi teknis baik dan sedang beroperasi. Meja tambahan dengan pengaman optik. Penerangan tambahan untuk meja pemotongan. Mesin diservis secara teratur. 1x pisau cadangan. Mesin dapat dipindahkan melalui bukaan selebar 100 cm. Spesifikasi teknis: Lebar potong maksimal: 670 mm Kontrol elektronik dengan tampilan Knodpfoxxb Uqsx Adwed Penggerak hidrolik untuk pisau dan penekan Pengaman cahaya pengaman Konstruksi kokoh dan stabil Penghitung potongan dan pengaturan kekuatan penekan

Kondisi: sangat baik (bekas), Trumpf TruTool C160-2 Plus Electric Slitting Shears Knodpfxeuhm Rbs Adwed The shears are in very good condition.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1987, Universal tool milling machine DECKEL FP 1 With 3-axis active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm Including the following accessories: Universal table, clamping area 600 mm x 250 mm Knjdpfx Adspxm Anjwsd Adjustable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. counterholder with counter bearing 1 pc. long milling arbor Ø 22 mm Various tool holders S 22 x 2 Bellows for Z-axis Machine lamp Automatic central lubrication pump Chip tray Coolant device Operating manual THE MACHINE IS IN VERY GOOD CONDITION!!

Kondisi: baru, Tahun pembuatan: 2024, de Knsdpot Ivamsfx Adwod

Kondisi: bekas, messer-wp-z2-v2 Knodpfexvcb Hjx Adwjd

Kondisi: bekas, de-001 Kjdpfjxu Dhfjx Adwend

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 542, Equipment: Precision six-jaw chuck Knodpfxsxxbpho Adwjd Cylindrical grinding attachment Workpiece positioning device Coolant system Grinding wheel mount Grinding wheels Operating manual

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, Mesin Pemotong Roti Treif Diskus SB Barang bekas Produsen: Treif Tipe: Diskus SB AL5 Tahun pembuatan: 2011 Knjdpfx Aoxxkt Nedwed Stainless steel / pisau bundar Jenis arus: 3-N-PE 50Hz 0,9/1,22 kW Tegangan operasi: 400 Volt Untuk layanan mandiri pelanggan 3 ketebalan irisan berbeda: 10, 12, 14 mm Dimensi luar: L: 95 cm P: 70 cm T: 120 cm Sudah dibersihkan dan diuji fungsi (pemotongan roti) Hasil: sangat baik No. artikel: 112284 Silakan hubungi jika ada pertanyaan

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1994, Universal tool milling machine DECKEL FP 1 With 3-axis active digital display Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 Y 160 Z 340 mm Speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Swiveling vertical milling head Retractable quill Infinitely variable feed via potentiometer 1 pcs. machine vice 1 pcs. steady rest with counter bearing 1 pcs. long arbor ø 22 mm, ø 16 mm, ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pcs. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual Knodpsw Agxrsfx Adwjd THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Mikron WF 3S with 3-axis active digital readout Heidenhain TNC 114 and infinitely variable feed Technical data: Knjdpfoxu Hkcex Adwjd >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed in all 3 axes from 1-750 mm/min >> Rapid traverse in 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight: approx. 1600 kg Accessories and features: >> 3-axis active digital readout Heidenhain TNC 114 >> Centralized lubrication >> Operating manual, programming manual, electrical schematics About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain TNC 114 path control, allowing axis travel to a programmed dimension (X, Y, or Z) and automatic stop upon reaching it. Four different zero points can be set; measurements can be entered in either absolute or incremental mode. The feed rate can be adjusted steplessly from 0-750 mm/min even during milling, and rapid traverse is possible at the push of a button. Spindle speed is adjustable in steps from 50 to 2240 rpm, but only when at a standstill. The vertical milling head is mounted with three screws and can be removed or reattached in just 2 minutes. It is manually fastened using the joint arm seen on the left of the machine and simply swung aside. The standout feature of this machine is its large travel range relative to its size: Z=380 mm, X=500 mm, Y=500 mm. The machine also features electronic protection for the vertical spindle. Mechanically and electrically tested. You are welcome to inspect and test the machine on site under power.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis Heidenhain digital readout Original condition!!! Technical data: >> Machine No. 56560/08 Year of manufacture: approx. 1975 Kodpsu Nvxmofx Adwjnd >> Fixed angular table >> Spindle speeds: 40 - 2000 rpm >> Feed on 2 axes >> Motor power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes Kodpfx Ast Aav Iedwsnd >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine no.: 2102-2867 >> Swivel-tilt rotary table (recently planed) >> Spindle speed range: 40 – 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the column >> Vertical and horizontal quill – SK40 taper >> Drawbar system: M16 >> Weight approx. 800 kg Kodpst Aarpofx Adwsnd Accessories and Equipment: >> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual. Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout – As new condition!! Ksdpfx Adewpi Dqswond Technical Data: >> Machine no.: 2101-51084, year 2011 >> Rigid angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal spindle taper: SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. The scope of delivery includes a hydraulic vise with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP1 live under power at our facility. The machine is available immediately.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition Kodsvb Ud Uopfx Adwsnd Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill – SK40 taper >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine leveling feet About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb Knedpfx Aju Racrjdwod >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) Knedju T D Nropfx Adwjd >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Knjdpfx Aeu Nvwvsdwjd Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis digital display Heidenhain ND 780. As new condition! Technical details: >> Machine No. 55249/08, year 2010 >> Fixed-angle table >> Spindle speed: 40 - 2000 rpm >> Feed: 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar: S20x2 >> Weight approx. 700 kg Equipment and accessories: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic machine vise >> Collets >> Tool holders >> Cutters Kedpoxu Hbhofx Adwond >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP1 repowered by FPS, in like-new condition. The package includes a hydraulic vise with swivel base, collets, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain digital readout simplifies and improves accuracy of operation. You are welcome to inspect and test the Deckel under power at our location. The machine is immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis Aktiv TNC 113 Heidenhain digital readout and infinitely variable feed in TOP condition Technical Data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (freshly planed) >> Spindle speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse on 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertically extendable quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and features: >> 3-axis TNC 113 Aktiv digital readout Heidenhain >> Coolant system >> Central lubrication About the machine: Ksdpfx Asuc Ubwedwend For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 comes from a laboratory of a state-owned facility, where it saw only limited use. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. On this later FP2 model, the feed is infinitely adjustable on all three axes, and the machine further features rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain positioning control, you can enter dimensions and the machine will automatically move to the set position. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take this opportunity to view and test this machine under power on site.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp Knodsu R D I Sspfx Adwod >> Coolant system >> Operating manual, spare parts catalog About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.