Beli Sac Fs 305 bekas (32)

Kondisi: baik (bekas), Tahun pembuatan: 1984, SAC mesin jointer bekas SAC FS 430 Ndedpox Nrvvofx Aahof - Lebar penyerutan: 430 mm - Panjang meja: 2,90 m - Poros pisau 120 mm dengan 4 bilah pisau jointer - Motor 3 KW, 380 Volt - Rem motor otomatis - Pengambilan serpihan 8 mm - Pagar pengarah miring hingga 45° - Pengarah bantu Aigner dapat diputar - Pelindung kerja tipe jembatan (penutup pisau) - Model rendah kebisingan dengan bibir meja baja bergerigi - Sok hisap serbuk - Berat sekitar 650 kg Lokasi: di lokasi pelanggan - tersedia segera - Penjualan sebelumnya tetap diperhitungkan

Kondisi: sangat baik (bekas), I would like to offer you the following machine: 1 used jointer-planer SAC FS 430 - 43 cm planing width - 2.90 m table length - 120 mm cutterblock with 4-knife Centrofix reversible knives - 3 kW, 380 Volt motor - automatic motor brake - 8 mm depth of cut - tiltable fence up to 45° - Aigner auxiliary fence can be swung away - CPC safety guard (knife cover) - Low-noise design with toothed steel table lips - Control panel at eye level - 160 mm extraction port - Weight: approx. 750 kg - 4 new Leitz HSS Centrofix reversible knives installed (€90 + 19% VAT) - CPC safety guard gas strut Lift-o-mat 300 N replaced (€100 + 19% VAT) - Price: €4,600 + 19% VAT Ndsdpfexr Rtcjx Aahjf The machine has been technically inspected, cleaned, adjusted and repainted. Cables and plug are included, and it is ready for immediate use. Very good condition. Payment in cash or by bank transfer before collection. Shipping is possible. Loading by forklift is no problem. The machine is sold without any warranty or guarantee. Please send me a short message. Thank you!

Kondisi: bekas, Tahun pembuatan: 1992, Working width: 530 mm Cutterhead: Leitz - Centrofix Number of knives: 4 Planer table length: 2,900 mm Planer table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Motor power: 4 kW Machine length: 2,800 mm Ndjdpfx Aaeug Tytehsf Machine width: 1,000 mm Weight: 800 kg

Kondisi: sangat baik (bekas), Calibrating and Fine Grinding Machine with 1 Grinding Unit, 1 Motor, Processing from Above Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min 1st Unit: Combination unit, grinding roller, rubber-coated, 90 Shore / pneumatically operated sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Approximate dimensions L x W x H: 1385 x 1980 x 1900 mm Ndedpfxjudxcho Aahof Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Abrasive belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 exit rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago MORE THAN 30 PCS WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical specifications subject to error and prior sale. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Kondisi: bekas, Mesin serut tebal SAC RS/530 - bekas - Balok penekan rantai, pengaturan ketinggian elektrik, rol bawah meja, motor pengumpan terpisah ----- Data Teknis ----- Lebar penyerutan: 530 mm, Jumlah pisau: 4 unit, Ndedpfjw I T N Hex Aahsf Tinggi bukaan: 240 mm, Kecepatan pengumpan: 7 / 14 m/menit, Diameter saluran ekstraksi: 140 mm, Motor: 4 kW, Berat: 840 kg

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Hauptantrieb Spindeldrehzahlbereich 6000 U/min Ndedpex D Ncyjfx Aahef Werkzeuge Max. Werkzeugdurchmesser 240 mm Zusätzliche Ausstattung Werkzeuge: Ausgestattet mit Stark Italia Profil IV68/78/Al Fertigungsliste direkt an der Maschine oder am externen PC schreibbar Programmänderung über Tastatur, Diskette oder ONLINE-Verbindung möglich Kompatibel mit „Fensterfertigungs“-Programmen Programme für Ablauf- und Serienfertigung CNC-Positionssteuerung mit 999 speicherbaren Positionen pro Spindel Automatischer Motorstart/-stopp sowie elektronische Spindelmotorbremse Fehlerdiagnose über Monitor Diese SAC F300 wurde 2006 produziert. Eine robuste Holzbearbeitungsmaschine, ideal für vielfältige Holzverarbeitungsaufgaben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Sonstige Holzbearbeitungsmaschinen

Kondisi: baik (bekas), Perajam ketebalan otomatis untuk kayu, furnitur, kusen, material komposit, material plastik - Standar CE Data teknis Lebar kerja: 530 mm Tinggi kerja minimum/maksimum: 3-300 mm Kedalaman pemotongan maksimum: 8 mm Jumlah pisau: 4 Motor: 5,5 Hp Posisi meja digerakkan secara motorik dengan pembacaan elektronik Kecepatan umpan variabel elektronik dari 4 sampai 16 m/menit Diameter mulut hisap: 160 mm Dimensi keseluruhan: 1240 x 920 x 1090 mm Ndedpfx Aaox Hizkshef Berat: 970 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, For sale is this fine thickness planer from SAC. Njdpfow Hluasx Aahedf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.000 mm, tinggi penggerindaan: 160 mm, jenis penyesuaian ketinggian: listrik, Wide Belt Sander SAC RTE 1000 Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – SAC • Model – RTE 1000 • Working width – 1000 mm • Max. working height – 160 mm • 1 sanding unit, combination type (hard roller + pad) • Pad with jump-in/out function • Main motor power: 11/15 kW (option to downgrade for an additional charge of 1500 PLN) • 2 machine working speeds • Stepless adjustment of conveyor feed speed • Electronic thickness gauge for the workpiece • Pneumatic oscillation • New conveyor belt • Safety sensor preventing insertion of oversized workpieces • Original paint • Abrasive belt size: 1890 x 1050 mm • Extraction port: 190 mm • Weight: approx. 1500 kg • Year of manufacture: 1987 • Overall dimensions: 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent, factory technical and visual condition Ndsdpfxsx E Agds Aahjf • Photos show the actual condition of the item for sale • Machine can be started and tested on site

Kondisi: bekas, Tahun pembuatan: 2005, lebar total: 2.900 mm, tinggi total: 1.100 mm, panjang total: 1.300 mm, de-hu-001 Nedpfewnidzjx Aahodf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tenoning machine for window production SAC F4 Technical Condition: Good, fully operational machine. A large set of spare parts is included in the price. Technical Specifications: - Min. workpiece height: 30 mm - Max. workpiece height: 90 mm (105–130 mm) - Min. workpiece width: 30 mm - Max. workpiece width: 600 mm - Min. workpiece length: 200 mm (measured within tenons) - Max. workpiece length: 3000 mm - Max. tenoning depth: 130 mm - Max. trimming width: 1000 mm - Wavelength: 320 mm - Spindle diameter: 50 mm Nodpfjrzvkcex Aahsdf - Vertical stroke: 290 mm - Tool zero diameter: 300–350 mm Stumpfstoßsäge (Stump saw) - Horizontal stroke: 130 mm - Continuous axis positioning - Tool diameter: 400 mm - Rotational speed: 3000 rpm - Motor power: 3.2 kW Zapfenschneidwelle (Tenon cutting spindle) - Motor power: 5.5 kW (optionally 7.5 or 9.25 kW) - Rotational speed: 3500 rpm Profile Cutting - Min. workpiece height without left guide: 20 mm - Max. workpiece height: 140 mm - Min. workpiece width: 45 mm - Min. workpiece length: 200 mm (measured within tenons) - Wavelength: 320 mm - Spindle diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Zero tool diameter: 110–140 mm Max. tool diameter: 240 mm First profile cutting spindle: - Motor power: 5.5 kW (optionally 7.5 or 9.25 kW) - RPM (bi-directional): 6000 rpm Second profile cutting spindle: - Motor power: 5.5 kW (optionally 7.5 or 9.25 kW) - RPM: 6000 rpm Tenon cutting carriage: - Working table dimensions: 750 x 900 mm - Motor power: 1.1 kW - Working feed speed: 3–10 m/min - Positioning speed: 45 m/min - Number of chip shield positions: 4–8 - Fence positioning with continuous axis up to 3000 mm - Angle guide: ± 60° Glazing bead saw unit: - Motor power: 2.2 kW - Saw blade diameter: 200 mm - Rotational speed: 6000 rpm Profile milling feed device: - Motor power: 0.75 kW - Feed speed (range): 4–20 m/min - Number of rollers: 16 - Roller diameter: 145 mm Grooving cutter for hardware slots (optional): - Motor power: 3.3 kW (5.5 kW) - Max. tool diameter: 190 mm - Spindle diameter: 30 mm - Rotational speed: 6000 rpm - Horizontal movement: 70 mm - Vertical movement: 40 mm Hydraulic system power: 0.25 kW Weight: 4300 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, Mesin Penebal SAC RS/530 Penyesuaian ketinggian elektrik Rol bawah meja Motor pengumpan terpisah Lebar pengetaman: 530 mm, Jumlah pisau: 4 buah, Tinggi celah: 240 mm, Kecepatan pengumpanan: 7 / 14 m/menit, Diameter port ekstraksi: 140 mm, Motor: 4 kW, Berat: 840 kg Njdpfx Aasx Dylrehjdf Harga: 3200.- Tahun pembuatan: 1985

Kondisi: sangat baik (bekas), Four-Sided Planer PAOLONI SAC RD 230 15/24 Technical data: Maximum planing width: 230 mm Nedsuy H Nwopfx Aahedf Maximum planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom right left top Number of upper steel feed rollers: 2 Number of upper rubber feed rollers: 1 Number of smooth table rollers: 1 Extraction port diameter: 3 x 120 mm Table lubrication pump Manual body lifting Power supply: 400 V Total power: 21 kW Overall dimensions: Length: 3280 mm Width: 1290 mm Height: 1500 mm

Kondisi: baik (bekas), Tahun pembuatan: 1979, Diameter spindle: 30 mm Kecepatan putar: 2.800 - 4.500 - 6.500 - 10.000 rpm Motor: 10 HP Dimensi meja: 1.100 x 1.000 mm Diameter saluran ekstraksi: 2 x 120 mm Kisaran kemiringan: -5 hingga +45 derajat Maks. kenaikan spindle: 130 mm Berbagai macam alat tersedia dengan tambahan biaya Termasuk alat dorong 4-rol HOLZHER Tipe 1112, masing-masing dengan 4 kecepatan maju dan mundur Perpanjangan meja buatan sendiri di kanan & kiri Njdpfsxran Nox Aahedf Dengan alat sesuai gambar

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, mesin serut permukaan. berbagai model Nedpfx Aaswt T Hdehjdf mesin bekas Jumlah pisau: 4 380 V / 50 Hz

Kondisi: bekas, Tahun pembuatan: 2005, lebar total: 1.250 mm, tinggi total: 1.250 mm, panjang total: 1.050 mm, gew-820-kg-2005-tech Nodpfx Aswnhyzsahedf

Kondisi: sangat baik (bekas), Wood milling machine Manufacturer: SAC Model: TS 80 Nedpfjtyv Aasx Aahedf 4 milling spindles: Speed: 2900 - 4000 - 5800 - 8000 rpm Milling stroke: 150 mm Table size: 1000 x 800 mm 3-roller feed unit Manufacturer: ELU, infinitely variable speed Motor: 380 Volt, 2800 rpm, 11.3 Amps, 5.5 kW Transport dimensions: Length: 1020 mm Width: 800 mm Height: 1650 mm (including pallet) Weight: 470 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Thicknesser SAC RS53 4 pisau Spesifikasi: • Kondisi – bekas, setelah inspeksi • Lebar kerja – 530 mm • Tinggi kerja – 240 mm • Motor dengan daya 4,0 kW • Poros 4 pisau untuk pisau tradisional • Indikator ketebalan analog • 2 kecepatan umpan • Poros penarik penuh, lurus sebelum poros penyerut • Dua rol baja pembuangan di belakang poros penyerut • Rol geser di meja bawah • Pengaturan atas/bawah manual • Meja didukung oleh 1 silinder kuat Njdexdxk Topfx Aahsdf • Cat asli • Saluran keluar serbuk gergaji diameter 145 mm • Berat sekitar 800 kg • Dimensi keseluruhan 95 x 100 x 105 cm (p x l x t) Informasi tambahan: • Foto yang ditampilkan menggambarkan kondisi asli barang jual • Bisa dinyalakan dan diperiksa di tempat.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), SAC CS40 Panel Saw Year of manufacture: 2008 S/N 312029 Cutting length: 3,200 mm Anodized aluminium sliding table 3,200 x 420 mm, Table lock for easy panel loading in any position Steel guide system Main saw spindle (30 mm), tiltable 45° Electric rise and fall of main blade Main motor 5.5 kW, self-braking motor Cutting speeds: 2,600 – 4,000 and 5,600 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm (at 90°) 100 mm (at 45°) Parallel fence: 1,500 mm Scoring saw motor: 0.75 kW Scoring blade diameter: 120 mm – 8,000 rpm scoring unit, externally adjustable Square crosscut fence with stops, extension table with mitre fence and movable outrigger support. 400 V, 50 Hz Ndodpfxjhwwlpe Aahjf Weight: 820 kg CE marked

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 9813, FIXED SHAFT SPINDLE MOULDER SAC SUERI MOD. TS110 - CE COMPLIANT - USED Nodpfx Aaowrh Hvehsdf - Extended tables 2400 mm - Volt. 400/50 - Serial no. 9813 - Year 1998 - *M42 - Complete with manual and CE declaration

Kondisi: bekas, Tahun pembuatan: 1980, Spindle tiltable: No Sliding table: Yes Height adjustment: Handwheel Tilting adjustment: - Cutter head adjustment: Manual Height indicator: Scale Tilting angle indicator: - Fence position indicator: Scale Ndjdpfx Ajk Eakcsahof Spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 1200 mm Machine depth: 900 mm Weight: 600 kg

Kondisi: bekas, lebar total: 1.140 mm, tinggi total: 1.390 mm, panjang total: 1.020 mm, en Ndodpfx Aewng N Ijahsf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.320 mm, tinggi penggerindaan: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition: Used, after comprehensive inspection and calibration • Manufacturer: SAC • Model: Project RT 1320 • Working width: 1320 mm • Max working height: 160 mm • 2 sanding units: - First: calibrating roller, hard rubber, diameter 300 mm (brand new, freshly recoated) - Second: pad unit with segmented foot and jump-in/jump-out function • Outlet dust removal brush • Main motors: 10 and 11 kW • Total machine power at full load: 28 kW • Control via touchscreen panel, capable of saving various programs and settings as required • Can operate in manual mode (custom parameters) or automatic mode (pre-saved programs) Nsdpjw U Dxfjfx Aahsdf • Infinitely variable speed adjustment for the second sanding unit • Stepless feed speed adjustment for conveyor • Electronic thickness display for sanded material • Vacuum pump included • Paper cleaning mechanism • Photocell-controlled oscillation • Conveyor in very good condition • Extension rollers for support tables • Thickness gauge for sanded material • Safety sensor preventing oversize material entry • Original paintwork • Abrasive belt size: 2620 x 1320 mm • Extraction ports: 3 x 175 mm + 120 mm (brush) • Weight: 2300 kg • Year of manufacture: 2001 • Dimensions: 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Photos reflect the actual condition of the machine • Possibility to run and inspect the machine on site

Kondisi: bekas, Tahun pembuatan: 1999, Spindle tiltable: Yes, -5 to 45° Height adjustment: electric Tilting adjustment: electric Fence adjustment: manual Height display: scale Ndjdpfxeiixxcs Aahsf Tilt angle display: scale Milling fence display: scale Spindle diameter: 30 mm Speeds: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000 rpm Motor power: 7.5 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2400 mm Machine width: 1400 mm Weight: 1100 kg

Kondisi: siap digunakan (bekas), Planer thicknesser SAC RS53, 4 knives Specification: • Working width – 530 mm • Working height – 240 mm • Motor power – 5.0 kW • 4-knife cutterblock for conventional knives • Analog thickness indicator • 2 feed speeds • Solid, straight infeed roller before cutterblock Nedpswgdghsfx Aahodf • Two steel outfeed rollers after cutterblock • Slip roller in the lower table • Manual up/down adjustment • Table supported on a single robust piston • Original paintwork • Extraction port diameter 140 mm • Weight approx. 800 kg • Overall dimensions: 92 x 100 x 160 cm (L x W x H) Additional information: • The attached photos depict the actual condition of the item for sale • Possibility to power up and test the machine on site.