Beli Schaublin 70 bekas (58)

Kondisi: baik (bekas), Tailstock for lathe, counter-support for dividing head, indexing device Kodpfsd Riw Hsx Acgsdp -for: Schaublin 102 -Collet chuck mount: W25 -Drawing: see photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, perangkat collet pneumatik dengan collet Kodozmm Dgepfx Acgodp

Kondisi: bekas, Data teknis: Perjalanan X: 700 mm Kecepatan putar: hingga 1500 rpm Kodpjxtnn Tjfx Acgedp Feed: 12 - 1000 mm/menit Ukuran meja: 1100 x 250 mm Kepala dapat diputar: ya Dimensi, sekitar: 1750 x 1600 x 1850 mm Berat, sekitar: 1900 kg

Tahun pembuatan: 1987, Kondisi: bekas, Mesin bubut Schaublin 102n Kdjdpfx Aozlugyjcgjp

Kondisi: baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Schaublin 102 N - VM, Nomor mesin BL 330699, Tahun pembuatan sekitar 1993, Mesin dengan poros ulir utama, Tinggi puncak 102 mm, Poros ulir utama: diameter 40 mm, dikeraskan dan ulirnya digiling. Pitch poros ulir utama: 4 mm. Kjdpfezlc Apox Acgsdp Gerakan makan: 8 gerakan memanjang dari 0,02 hingga 0,3 mm/putaran. Rentang ulir: Metrik: 20 pitch dari 0,25 hingga 4 mm. Imperial (inci): 25 pitch dari 80 hingga 6 tpi. Jarak antara pusat 450 mm, Ø putar maks. di atas alas 200 mm, Ø putar maks. di atas support 120 mm, Kecepatan spindle hingga 2.800 rpm, Dudukan tailstock, Aksesori,

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Schaublin 102 N, Kjdezlcz Eepfx Acgsdp Nomor mesin BL 329218, Tahun pembuatan sekitar 1998, Tinggi tengah 102 mm, Jarak antara tengah 375 mm, Diameter bubut maksimum di atas landasan 200 mm, Diameter bubut maksimum di atas luncur 120 mm, Kecepatan putar spindel hingga 2.800 RPM, Ekor mesin, Aksesori.

Kondisi: baik (bekas), Stufenfutter, Präzisions-Spannfutter, Glockenzange, Stufenspannzange, Ringfutter, Spannzangenhülsen, Spannzange, Werkzeugaufnahme, Werkzeughalter, Spannhülsen -Herstelle: Schaublin, Stufenfutter Präzisions-Spannfutter Aufnahme MK6 -Größe: 81 bis 106 siehe Fotos Kdjdpfxjyizh To Acgjp -Abmessung ges.: Ø 131 x 175 mm -Gewicht: 5,3 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 90 mm, daya motor spindle: 1.500 W, tinggi total: 1.370 mm, lebar total: 800 mm, berat keseluruhan: 360 kg, panjang produk (maks.): 2.000 mm, jumlah sumbu: 2, Horizontal lathe from 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor-driven headstock. It is equipped with a pneumatic clamping device and a Tripan-111S quick-change toolholder system. The machine includes a 3-jaw chuck and a tailstock with a revolving center. If you are looking for a high-quality lathe, consider the SCHAUBLIN 102Mi W25 we have for sale. Contact us for further details. • Headstock: Integrated motor • Mounting: Bench-mounted (CE version) • Cross slide: Crank cross slide with digital position measuring system • Tailstock: Morse taper 2 Additional equipment: • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic W25 clamping device with graphite distributor • Tripan-111S quick-change toolpost system • Boring bar holder, 30° inclined, max Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessories: revolving center 60°, Ø18 mm (Gepy) • W25 collet set (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp • Max. permissible diameter over bed: 200 mm • Max. permissible diameter over carriage (cross slide): 120 mm (60 mm with rear support) • Center height over bed: 102 mm • Center height over carriage: 20 mm • Max. center distance: 470 mm • Bed length: 1,000 mm • Bed height: 168 mm • Main spindle drive: AC motor, 1.5 kW (continuous operation) • Spindle type options: W20 / W25 • Spindle speed (stepless): 100 – 6,000 rpm • Spindle bore: 20 mm (W20) / 25 mm (W25) • Max. bar capacity: 14.5 mm (W20) / 19 mm (W25) • Manual carriage travel on bed: 442 mm • Cross travel (X-axis): 100 mm • X-axis resolution (radius): 0.001 mm (digital) • Longitudinal travel (Z-axis): 90 mm (optional: 150 mm with swiveling top slide) • Z-axis resolution: 0.001 mm (digital) • Trapezoidal leadscrew: Ø 9 x 2 mm pitch • Max. tool shank cross-section: 16 x 16 mm (Multifix system) / 12 x 12 mm (Tripan system) • Toolholder bore: 20 mm (Multifix system) / 12 mm (Tripan system) • Standard tailstock: Morse 2 internal taper, 30 mm quill diameter, 80 mm stroke • Lever tailstock (optional): W20/W25 internal taper, 40 mm quill diameter, 100 mm stroke • Starwheel-operated tailstock (option): W20/W25 internal taper, 40 mm quill diameter, 150 mm stroke • Quick-clamping lever system (optional): Maximum spindle speed 3,000 rpm • Pneumatic clamping system (option): Adjustable axial clamping force, 500 daN at 5 bar, max. spindle speed 6,000 rpm • Spindle lock: Pneumatically operated spindle lock, locking torque 48 Nm at 5 bar (max. speed 3,000 rpm) • Steadies (optional): Travelling and fixed steadies, Ø 0.01 to 40 mm • Electrical connection: 400V, 50/60 Hz, rated current 12A (max. 20A incoming fuse), +/- 5% permissible voltage fluctuation • Power consumption: 1.8 kVA • Noise level under load at operator station: < 60 dBA • Operating temperature: +15°C to +30°C (+5°C to +40°C for digital measurement devices) • Relative humidity: 5% to 80% • Battery for digital measurement devices: 1x lithium 3V, type CR 2032 (current draw: 45 µA, service life: 5,000 hours continuous operation) Kdodey Snmvopfx Acgep • Floor loading: 263 kg/m² • Floor payload capacity: 113 kg/m² Technical Specification: Counter Spindle: No Driven Tools: No

Kondisi: baik (bekas), Tahun pembuatan: 1964, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 700 mm, panjang umpan sumbu Y: 250 mm, panjang umpan sumbu Z: 490 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 490 mm, tinggi total: 1.720 mm, lebar total: 1.920 mm, panjang total: 2.250 mm, lebar meja: 305 mm, panjang meja: 1.100 mm, berat keseluruhan: 2.000 kg, lebar yang dibutuhkan: 1.920 mm, persyaratan ruang panjang: 2.250 mm, kebutuhan tinggi: 1.720 mm, Perlengkapan: dokumentasi / manual, de-hu-001 Kdsdsyhm D Dopfx Acgsp

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Schaublin 102N Mesin Bubut Presisi. Tipe meja. Kjdpfx Ajziq Dpjcgodp Kondisi baik, berfungsi penuh. Jarak antara senter: 450 mm Tinggi senter: 102 mm Spindle W20 Diameter pembubutan di atas carriage 120 mm dan di atas ranjang 200 mm Kepala lepas - dudukan MK2 Koneksi 50 Hz 3x 380 Volt

Kondisi: bekas, Schaublin 102 VM Tersedia total 5 unit di stok. Harga per unit: 2.000 Euro. Kodpfezicwbjx Acgodp Lihat foto.

Kondisi: bekas, Butuh perawatan dan sabuk datar baru, selain itu kondisi ok. Aksesori lihat foto. Kdsdpfx Aozicgiocgep

Kondisi: bekas, Centre height 102 mm Centre distance 450 mm Spindle bore 25 mm Spindle speed: 220 - 2600 Kdsdjwbi Hpjpfx Acgsp Accessories have not been checked for completeness Cabinets are not included in the scope of delivery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Control: Fanuc Series 20-T Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Kedpfx Aozb R Iascgedp Spindle speeds: 5,000 rpm 8-station turret Minimum quantity lubrication

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstock: Standardized spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Spindle clamping force: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Travel on X-axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feed Rates: Working feed (X/Z axes, stepless): 0–5000 mm/min Rapid traverse (X/Z axes): 8/10 m/min Feed force (X/Z axes): 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 AC motor, peak power (intermittent duty): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardized toolholder fixing: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant System: Tank capacity: 120 liters Pump rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i CNC control 1 A2-6 spindle headstock 1 12-station VDI 30 turret for 6 driven tools 1 pneumatically controlled tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 3-jaw chuck 1 Brucker CM5 live center 1 ESX-25 radial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25 without EX nut 1 EWS ESX-25 without EX nut 4 left radial toolholders, short, Form B2, ref 4100.0100 1 ESX-25 collet holder, Form E3 with EX25 nut and Ø 5 mm collet 1 same, without EX25 nut 3 tapping collets Ø 4.5–6 and 8 mm 1 indexable insert drill holder, Ø 40 mm bore, Form E1, ref 4100.00124 1 same, Ø 32 mm bore, ref 4100.00107 1 same, Ø 20 mm bore, ref 4100.00105 1 boring bar holder Ø 8 mm, Form E2, ref 4100.00108 1 same, Ø 10 mm, ref 4100.0109 1 same, Ø 12 mm, ref 4100.0110 2 same, Ø 16 mm, ref 4100.0111 1 same, Ø 20 mm, ref 4100.0112 1 same, Ø 25 mm, ref 4100.0113 1 same, Ø 32 mm, ref 4100.0115 1 same, Ø 32 mm, GARANT, long 5 steel protection plugs, Form Z2, ref 4100.00130 1 left axial toolholder, Force C4, ref 4100.00103 1 pneumatically controlled tailstock support, CM 5, ref 180-65.200 1 stand only for microscope, ref 180-60.005 1 coolant device OPTIONAL ACCESSORY 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref 180-70.200 chf. 2,500.-- + VAT Kodpozb U Epjfx Acgjdp Subject to errors or omissions, the technical information is provided without obligation.

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut dengan gerobak dan peralatan Kdjdpszg Hk Tofx Acgep

Kondisi: bekas, DATA TEKNIS - lihat foto Kedpfsw Ihtyox Acgedp

Kondisi: bekas, DATA TEKNIS - Tinggi pusat: 102 [mm] Kjdpfsw Ihttox Acgedp - Diameter maksimum di atas alas: 200 [mm] - Jarak antara pusat: 470 [mm] - Tipe penjepit spindel: W20 - Lubang gelendong: 20 [mm] - Transisi dari batang ke collet: 14,5 [mm] BERAT DAN DIMENSI - Kebutuhan ruang: 1500 x 800 [mm] - Tinggi mesin: 1300 [mm] - Berat mesin: 500 [kg]

Kondisi: bekas, TECHNICAL DATA Kjdeuhcarspfx Acgsdp - Max. swing over bed : 270 [mm] - Max. swing over cross slide : 130 [mm] - Distance between centres : 440 [mm] - Spindle nose : CAMLOCK D1-3' - Max. bar capacity : 28 [mm] - Motor power : 7.5 [kW] - Spindle speed : 0-5000 [rpm] with variator - Travels X x Z : 180 x 400 [mm] - Feed rates : 0-5000 [mm/min] with variator - Rapid traverse : 7500 [mm/min] - Power supply : 3-phase 380V 50Hz 14kW - Dimensions : 1700 x 1226 x 1660 [mm] - Weight : 1415 [kg] EQUIPMENT - FANUC 20-T CNC control - Multifix 'A' quick-change turret - SCHAUBLIN B32 collet chuck - Tailstock with handwheel - Coolant tank with pump

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 3 - Jumlah spindle: 2 SPINDEL UTAMA - Putaran spindle: 30 - 6000 [rpm] - Daya penggerak spindle: 5,5 [kW] - Diameter batang maksimum: 32 [mm] - Diameter pengerjaan maksimum: 115 [mm] - Resolusi minimum sumbu C: 0,001 [derajat] SPINDEL LAWAN - Hidung spindle: A2-4 REVOLVER 1 - Jumlah posisi: 8 - Jumlah posisi bermotor: 8 - Kecepatan alat bermotor: 5000 [rpm] - Daya alat bermotor: 0,75 [kW] - Perjalanan X: 220 [mm] - Perjalanan Z: 300 [mm] - Kecepatan rapid traverse (X/Z): 6 / 10 [m/menit] Kodpozgx Absfx Acgodp REVOLVER 2 - Jumlah posisi: 6 SUPLAI LISTRIK - Tegangan suplai: 380 [V] - Total daya: 16 [kW] BERAT DAN DIMENSI - Ruang yang dibutuhkan: 2830 x 2610 [mm] - Tinggi mesin: 1860 [mm] - Berat mesin: 1600 [kg] PERLENGKAPAN - Kontrol: Fanuc 18-TB - Tangki pendingin - Pengambil bagian - Magazin batang: IEMCA BOSS 332 E / 32 LL

Kondisi: bekas, SPZNG-BOLEYSET Kdedpfx Acozbhu Degsp

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 490 mm, lebar meja: 305 mm, panjang meja: 1.100 mm, berat keseluruhan: 2.000 kg, tegangan masuk: 400 V, Schaublin 53 dalam kondisi baik. ISO-40. 5,1 kW. Ksdpfx Ajy A Nbijcgodp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: FANUC, model controller: Series 0i/-MC, tinggi total: 2.580 mm, panjang total: 2.150 mm, lebar total: 2.470 mm, lebar meja: 750 mm, panjang meja: 540 mm, berat keseluruhan: 4.500 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 1.480 h, hidung spindel: ISO40, jumlah spindel: 1, jumlah slot dalam magazin alat: 20, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Schaublin 60 CNC sangat cocok untuk pekerjaan dengan presisi tinggi dan produksi seri kecil. Mesin ini dikenal karena akurasi ukuran dan bentuknya yang sangat tinggi, presisi putaran spindle yang luar biasa, serta kualitas permukaan terbaik – ideal untuk pembuat alat, industri mekanik presisi, atau industri medis/perhiasan! Mesin ini standar dilengkapi dengan: - Pendingin internal (TSC) - Handwheel elektronik - Dokumentasi asli Kdjdpfx Aceyu Rpkogep - Sekitar 30 baut penjepit

Kondisi: sangat baik (bekas), The used SCHAUBLIN 120 VM precision parallel lathe is a Swiss manual lathe of medium/small dimensions, with a centre height of 120 mm, a centre distance of 600 mm, and a spindle bore of 25 mm. The machine is complete with feeds and various accessories, already equipped with an electrical panel and wiring in compliance with regulations; tooling and overall condition as shown in the photos. Kedpfx Aowqxcfocgodp

Kondisi: bekas, TECHNICAL DATA - Travels: 320 x 150 x 375 [mm] - Distance vertical spindle - table surface: 310 [mm] - Distance horizontal spindle - table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58-2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12-400 [mm/min] Kdodpeuhbw Nofx Acgop - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions: 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] EQUIPMENT - Swiveling vice - Coolant system