Beli Schaublin 53 bekas (54)

Kondisi: siap digunakan (bekas), Table clamping surface: 1100 x 255 mm Table travel X-axis: 700 mm Table travel Y-axis: 250 mm Table travel Z-axis: 430 mm Spindle speeds: 38 - 1500 rpm Longitudinal and cross feeds: 12 - 1000 mm/min Vertical feed: 1.75 m/min Electrical connection: 380 V, approx. 4 kW Hnedpfxjv Dh Irs Adqou Required space: 1700 x 1600 x 1650 mm Weight: 1650 kg

Kondisi: bekas, de-hu-001 Hnsdpfx Adowni Akeqeu

Kondisi: bekas, Tahun pembuatan: 1999, de-to-hu-it-lt-001 Hnedpfx Aexlugmsdqsu

Kondisi: baik (bekas), Swing diameter over bed 270 mm Centre height 125 mm Centre distance 600 mm Spindle speeds 30-5000 rpm Control: FANUC 18i Manual Guide Various accessories MARCELS MASCHINEN CH Hnodpfxotwpyao Adqou

Kondisi: baik (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 160378, diameter putar di atas sled silang: 180 mm, lubang spindel: 40 mm, diameter pembubutan: 375 mm, tinggi pusat: 160 mm, panjang pembubutan: 750 mm, panjang total: 2.500 mm, lebar total: 1.000 mm, tinggi total: 1.500 mm, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 38 rpm, berat keseluruhan: 2.500 kg, - Operating voltage: 380 V - Maximum workpiece diameter over bed: 375 mm - Maximum workpiece diameter over cross slide: 180 mm - Spindle taper: Morse 5 - Collet pass-through: 24 mm - Fine feed, longitudinal and cross: 0.015 to 0.21 mm/rev - Longitudinal and cross feed: 0.025 to 0.35 mm/rev - Cross slide travel on the bed: 750 mm - Tool slide travel: 120 mm - Cross slide travel: 215 mm - Center height above tool slide: 32 mm Hnodev Irh Dspfx Adqeu - Tool cross-section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill travel: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Including documentation - Matching workshop cabinet including accessories

Kondisi: sangat baik (bekas), The used SCHAUBLIN 102N bench lathe is a Swiss-made, manual precision lathe of compact size, center height 102 mm, distance between centers 400 mm, spindle bore 20 mm. Hsdpfx Ajwqxcxedqonu Available: No. 2 similar machines (one with short bed and quick-change tooling, the other with long bed and geared headstock); both already equipped with electrical control panel and documentation in compliance with standards; tooling and conditions as shown in the photos.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Aksesori tambahan dapat didiskusikan di lokasi. Hsdpfxov Natwe Adqenu

Kondisi: baik (bekas), Tahun pembuatan: 1997, diameter putar di atas sled silang: 60 mm, lubang spindel: 24 mm, daya motor spindle: 7.500 W, kecepatan rotasi (min.): 30 rpm, kecepatan rotasi (maks.): 5.000 rpm, tinggi total: 1.660 mm, panjang total: 1.700 mm, lebar total: 1.240 mm, berat keseluruhan: 1.420 kg, Mesin bubut CNC dengan chuck collet F38 Diameter putar maks. Ø 200 mm, langkah X/Z 180/255 mm, turret alat SAUTER 8 posisi VDI20 (16x16 mm), spindle 7,5 kW, ujung spindle A2-4, kecepatan putar 30-5000 rpm, lubang batang Ø 32 mm, stop spindle berlubang, kontrol FANUC Series T-20, buku manual Hedpfx Adovu Tvpsqsnu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1968, de2huitlt20240614 Hsdpsw Rd Hbefx Adqonu

Kondisi: baik (bekas), Translation: Travel paths: 300 x 150 x 355 mm Table size: 700 x 250 mm Spindle taper: ISO 30 Hnodpfx Aou Eqixedqsu Spindle speeds: 58–2000 rpm With digital readout Various accessories MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Schaublin 125 Lathe Center Height: 135 mm Center Distance: 400 mm Spindle Speeds: 68 – 2500 rpm Lathe Chuck: F 160 Multifix Toolpost Size A Collet System with 44 Collets Heidenhain Three-Axis Digital Readout Hedpfxjvi Hqpj Adqonu Drive Plate for Steady Rest Length: 1430 mm Width: 800 mm Height: 1800 mm (with pallet) Weight: 1100 kg

Kondisi: sangat baik (bekas), Centre height 125 mm Centre distance 500 mm Spindle speed 45 - 3000 rpm Feed rate 4 – 260 mm/min Spindle nose Camlock D1-3" Tailstock taper MT 2 Swing over bed 250 mm Swing over cross slide 120 mm Hnjdpfxotzxh To Adqsu Top slide travel 100 mm Cross slide travel 180 mm Dimensions (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), de Hjdpfxjxdfmbo Adqonu

Kondisi: baik (bekas), Tahun pembuatan: 1998, Schaublin 65 TM-3 Panjang 2800, Lebar 1700, Tinggi 2150 Motor 27 kW Termasuk seperti pada gambar Konveyor serpihan Chuck Fanuc 18i-T Hedpjxf D S Eofx Adqonu

Kondisi: bekas, Manufacturer: Schaublin In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Hodpfx Adow A Ap Teqenu Modifications and errors in the technical data and information as well as prior sale are reserved!

Kondisi: sangat baik (bekas), Center height 125 mm Center distance 500 mm Spindle speeds 40-3000 rpm Hnodjlyrciopfx Adqeu Various accessories MARCELS MACHINES CH

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Rectangular vertical table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed angle table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 250 mm Universal tilting table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 350 mm Swivel range in three planes, either side: 30°- 45°- 30° Spindle taper: - Horizontal spindle head: Iso 30 (40) - Vertical spindle head: Iso 30 (40) - High-speed universal head: SV E20+ES20 Swiveling in the vertical plane: Vertical spindle head: 360° Longitudinal travel (manual/automatic): 320/300 mm Vertical travel (manual/automatic): 375/355 mm Cross travel (adjustment handwheel): 150 mm Quill stroke: 60 mm Micrometer drum reading accuracy: 0.02 mm Main motor kW-rpm: 1.5/1500 Rapid traverse/feed motor kW-rpm: 0.45/3000 Coolant pump motor kW-rpm: 0.15/3000 Hjdpfew Uc Npox Adqsnu Spindle speed range: - 1st range rpm: 58-375 - 2nd range rpm: 330-2000 Working feeds – longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical), mm/min: 1200 Unless stated otherwise, all technical data provided is without commitment and subject to possible errors or omissions.

Kondisi: seperti baru (mesin pameran), Schaublin lunette steady rest bridge 102VM Hodpfx Ajkw Drzsdqjnu

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 205754, Schaublin 135 precision lathe in good condition, original paint, equipped with Mitutoyo 2-axis digital readout and accessories. Machine No. 205754 * Centre height: 135 mm * Distance between centres: 630 mm * Max. workpiece diameter over bed: 315 mm * Max. workpiece diameter over cross slide: 150 mm * Max. workpiece diameter in gap: 355 mm * Spindle speeds, infinitely variable: 14 – 3000 rpm, with reduction gearbox * Spindle nose: Camlock D1 – 4" * Spindle taper: Morse 5 * Spindle bore: Ø 40 mm * Sleeve for collet chuck B 32 Thread cutting and feed gearbox: Hjdpfsmidlkex Adqenu * 48 metric threads 0.25 to 14 mm * 48 imperial threads 72 to 1 TPI * 48 module threads module 0.125 to 7 * 24 fine feeds, longitudinal and cross: 0.015 to 0.21 mm * 24 longitudinal and cross feeds: 0.025 to 0.35 mm * Higher feeds by using thread gears Cross slide: * Travel along the bed: 620 mm * Tool post slide travel: 100 mm * Cross slide travel: 180 mm * Centre height above tool post slide: 26 mm * Tool section: 16 x 16 mm Tailstock: * Quill taper: Morse 3 * Quill stroke: 120 mm * Lateral adjustment: 10 mm Motor: * Speed: 750 – 3000 rpm * Power: 2 / 4 HP Weight and space requirements: * Approx. 1300 kg * Length x depth x height: 1715 x 970 x 1280 mm Accessories in cabinet: * Mitutoyo 2-axis digital readout * Change gears * 2 pcs. 3-jaw chucks * MULTIFIX quick-change tool post with 2 holders * Additional Drehblitz tool post with 4 holders * Faceplate * New drill chuck * New live centre * Storage box with various chisels and tools * Coolant system * Machine manual in German About the machine: For sale is a Schaublin 135 lathe in technically very good condition. The machine is fully functional and comes with accessories. All guides are in very good condition, and the machine is geometrically sound. All slides move smoothly and evenly. The machine has been mechanically and electrically inspected and an oil change has been carried out. The lathe runs very quietly, even at high speeds. Take the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.

Kondisi: bekas, de2hu2it2lt2lv2nb2nl2pl Hjdpfx Aew Sx Ucedqsnu

Kondisi: sangat baik (bekas), with NC indexing head Travel paths: 600 x 510 x 510 mm Spindle mount: BT40 Spindle speeds: up to 12,000 rpm Hnjdpfxewhlcmj Adqou Tool changer: 20 positions Control: SIEMENS 810D Shopmill Through-spindle coolant Zero-point clamping system Various accessories MARCELS MASCHINEN CH

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 350735, Origin of manufacture: Switzerland Voltage: 400V Net weight: 1,570 kg Customs tariff code: 8458.1120 External dimensions: 1830 x 1260 x 1700 mm TECHNICAL DATA Capacities Maximum turning diameter: Ø 270 mm Maximum permissible diameter over cross slide: Ø 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Spindle speed, stepless: 50 – 5,000 rpm Internal spindle diameter (without clamping key): 39 mm Maximum bar capacity in collet W20: 14.5 mm Maximum bar capacity in automatic chuck: 32 mm Maximum recommended turning diameter: 200 mm Pneumatic clamping Adjustable axial clamping force at 5 bar: 1,150 daN Cross slide Cross travel, X-axis: 180 mm Resolution, X-axis (on radius): 0.0005 mm Drive: AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive: AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Hnsdpfx Ajhr Rtnedqju Working feed rates, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min Feed forces, X / Z axes, stepless: 503 / 503 daN Tool system: Turret Standardized tool holder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous / intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 – 5,000 rpm Maximum tool cross-section: 16 x 16 mm Integrated coolant supply and bi-directional indexing: yes Coolant Tank capacity: 55 L Pump flow rate: 10 L/min Pressure: 1.7 bar Pneumatic tailstock Taper of quill: Morse 3 External diameter of quill: 45 mm Quill stroke: 70 mm Adjustable support force: 25 – 260 daN Center height from floor: 1,162 mm All technical data is provided without guarantee and subject to change or error.

Kondisi: baik (bekas), Dengan tampilan digital Dengan kepala bor dan frais Perjalanan 330 x 400 x 475 mm Area penjepitan meja 650 x 245 mm Kepala spindle ISO 40 Kecepatan spindle 63-2.800 rpm Berbagai aksesori Hnsdpfjw Nnutex Adqju MARCELS MASCHINEN CH

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff position: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstocks: Standardized spindle nose, allowing the use of various collets and chucks via adaptation accessories. Collet accessories for SCHAUBLIN: B45/F48 Maximum bar capacity, diameter: 36 mm / 42 mm Automatic chuck, standard diameter: 170 mm Direct drive by AC motor, power at 100% / 50% ED: 15 / 18.5 kW Maximum torque at 100% / 50% ED: 135 / 165 Nm Maximum spindle speed: 5000 min⁻¹ C-axis: Pneumatic clamping cylinder: 2700 daN Cross slide: Travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, rated torque: 3 Nm Ball screw, dia. x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, rated torque: 6 Nm Hnjdpfx Adew T Smheqou Ball screw, dia. x pitch: 32 x 10 mm Feed rates: Working feed, X/Z axes, stepless: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tooling system: Number of tool stations: 8 Standardized tool holder interface: VDI 30 Max. cutting tool section: 20 x 20 mm Integrated coolant supply Bi-directional indexing Coolant system: Tank capacity: 120 liters Pump flow: 10 l/min Pressure: 5 bar Unless otherwise indicated or in case of omission, the technical details above are provided without commitment.

Kondisi: sangat baik (bekas), Double spindle, C-axis FANUC 18i-TB control Turning diameter: up to 300 mm Turning length: up to 366 mm Main spindle speed: 30–5,000 rpm Counter spindle speed: 30–6,000 rpm Turret: 12 driven stations Hsdpfx Aewufdqedqonu C-axis indexing: 0.001 degrees Various accessories MARCELS MASCHINEN CH