Beli Schaublin 53 N bekas (55)

Kondisi: bekas, Data teknis: Perjalanan X: 700 mm Itjdsxtnn Topfx Aaher Kecepatan putar: hingga 1500 rpm Feed: 12 - 1000 mm/menit Ukuran meja: 1100 x 250 mm Kepala dapat diputar: ya Dimensi, sekitar: 1750 x 1600 x 1850 mm Berat, sekitar: 1900 kg

Kondisi: bekas, tinggi total: 1.700 mm, lebar total: 1.600 mm, panjang total: 1.800 mm, 1 Itsdpfx Aaswni Akehjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1982, panjang pemakanan sumbu X: 700 mm, panjang umpan sumbu Y: 490 mm, panjang umpan sumbu Z: 250 mm, Tampilan Heidenhain 3 sumbu spindel ISO 40 meja 1100x305 mm Itsdpjxxmpmjfx Aahor perjalanan 700x490x250 mm 7,5 HP berat 2100 kg

Kondisi: siap digunakan (bekas), Table clamping surface: 1100 x 255 mm Table travel X-axis: 700 mm Table travel Y-axis: 250 mm Table travel Z-axis: 430 mm Spindle speeds: 38 - 1500 rpm Longitudinal and cross feeds: 12 - 1000 mm/min Itedpfxov Dh Irj Aahjr Vertical feed: 1.75 m/min Electrical connection: 380 V, approx. 4 kW Required space: 1700 x 1600 x 1650 mm Weight: 1650 kg

Kondisi: sangat baik (bekas), The used SCHAUBLIN 102N bench lathe is a Swiss-made, manual precision lathe of compact size, center height 102 mm, distance between centers 400 mm, spindle bore 20 mm. Itsdpfewqxcxex Aahsr Available: No. 2 similar machines (one with short bed and quick-change tooling, the other with long bed and geared headstock); both already equipped with electrical control panel and documentation in compliance with standards; tooling and conditions as shown in the photos.

Kondisi: bekas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over carriage: 120 mm Headstock Spindle nose for collets, type Schaublin W25 Spindle bore: 25 mm Collet capacity: 20 mm Gear reduction ratio: 1:5 Bed Height x Width x Length: 168 x 130 x 1000 mm Cast iron bed, trapezoidal profile as per lathe 102 N, with hardened and ground dovetail guideways. Carriage Maximum travel on bed: 400 mm Tool slide width - length: 80 – 194 mm Hand traverse: 90 mm Centre height above tool slide: 20 mm Tool shank size: 12 x 12 mm Cross slide width – length: 94 – 300 mm Hand traverse: 100 mm Saddle: length of guideways on bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric threads: 0.25 – 4 mm Machine plate for 25 imperial threads: 80 – 6 TPI Tailstock Quill diameter: 30 mm Quill taper: 2 Morse Quill travel: 80 mm Coolant System Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Iodpfxsbxkl Tj Aahjtr Lathe on cabinet base, approx. 550 kg

Kondisi: bekas, DATA TEKNIS - Tinggi pusat: 102 [mm] - Diameter maksimum di atas alas: 200 [mm] - Jarak antara pusat: 470 [mm] Itedpfx Aow Ihtteaher - Tipe penjepit spindel: W20 - Lubang gelendong: 20 [mm] - Transisi dari batang ke collet: 14,5 [mm] BERAT DAN DIMENSI - Kebutuhan ruang: 1500 x 800 [mm] - Tinggi mesin: 1300 [mm] - Berat mesin: 500 [kg]

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Schaublin 135 High-Precision Lathe with K&C 3-Axis Digital Readout (NEW) and Accessory Cabinet in Excellent Condition from a University Department! Technical Data: >> Machine No.: 252409 >> Center Height: 135 mm >> Distance Between Centers: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Thread Pitches: 0.25–14 mm >> Tailstock Taper: MK3 >> Infinitely Variable Spindle Speeds: 55–3000 rpm Iodpjx I Nkusfx Aahjtr >> Total Connected Load: 4.45 kW >> Weight: approx. 1,200 kg Included Accessories: >> K&C 3-axis digital readout, brand new, 12 months manufacturer's warranty, including user manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving function, reference mark, 200-tool memory, taper calculation, radius/diameter mode, quick zeroing, counting direction switch >> Accessory cabinet containing: - Several 3-jaw chucks with multiple sets of jaws - Multifix A quick-change toolpost with holders - Internal and external collet quick-change device - Change gears - 4-jaw chuck - Faceplate - Fixed and travelling steady rests - Coolant system - Centres - Operator's manual - Turning tools and much more About the Machine: For sale is a Schaublin 135 High-Precision Lathe. The lathe is in excellent condition, comes from a university, and has had very little use. Equipped with a brand-new K&C 3-axis digital readout and a comprehensive range of accessories. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 312560, Fully overhauled – newly painted, New worktable Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3-phase Customs tariff number: 8458.1930 TECHNICAL DATA – Centre height: 102 mm – Centre distance, headstock type W, standard: 470 mm – Centre distance, headstock W with reduction gear: 375 mm – Swing over bed: 200 mm – Swing over cross slide: 120 mm Bed: – Height-width-length: 168-100-1000 mm Bed made of cast iron with ground trapezoidal profile Headstocks: – Spindle nose for collets: W-25 – Collet capacity: 19.0 mm – Reduction ratio of gear train: 1:5 Cross slide: – Longitudinal travel: 90 mm – Cross travel: 100 mm – Shank cross-section for turning tools: 12x12 mm Tailstock: – Internal taper of quill: Morse 2 – Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors and omissions excepted. Technical data is given without obligation. Inventory no. 2210049, machine comprises: 1 bed 105-11 Iodpfjdr R Tcsx Aahjtr 1 headstock 105-26 1 cross slide 102-45 1 tailstock 105-65 1 Voegtle motor 380V/50Hz/3ph; 750–3000 rpm; 0.4/0.9 kW 1 set of 40 collets W20, Ø 0.5 to 20 mm (in 0.5 mm increments) 1 Tripan 111S tool holder 2 Tripan 131 tool holders 1 Tripan 132 tool holder 1 W20 hollow centre

Tahun pembuatan: 1998, jam operasional: 1.339 h, Kondisi: siap digunakan (bekas), Unit Kontrol Merek: FANUC Model: Series 18i-T Penggerak Utama Jumlah sumbu: 4 Kecepatan spindle: 4000 RPM Taper alat: VDI 30 Itsdpfx Aox D Itwsahor SCHAUBLIN 65 TM-3 4-sumbu ini diproduksi pada tahun 1998. Mesin bubut horizontal yang tangguh ini memiliki diameter putar maksimum 380 mm dan panjang 534 mm. Dengan kecepatan spindle dan alat berputar hingga 4.000 RPM, serta turret 12 posisi dengan alat bertenaga, ini adalah peluang menarik untuk membeli mesin bubut horizontal SCHAUBLIN 65 TM-3. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pembubutan

Kondisi: baik (bekas), Translation: Itsdpfxju Eqixj Aahor Travel paths: 300 x 150 x 355 mm Table size: 700 x 250 mm Spindle taper: ISO 30 Spindle speeds: 58–2000 rpm With digital readout Various accessories MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Control: Fanuc Series 20-T Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Ijdpfx Ajwh U Dtoahstr Spindle speeds: 5,000 rpm 8-station turret Minimum quantity lubrication

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, lebar di tengah: 630 mm, lubang spindel: 40 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 14 rpm, berat keseluruhan: 1.500 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Schaublin 150A Mesin Bubut Spesifikasi Pabrikan: Schaublin Tipe: 150 Tahun pembuatan: Tidak diketahui Kontrol: Konvensional Diameter putar maksimum: 340 mm Jarak antara senter: 630 mm Spindel Utama Kecepatan putar: 14 hingga 3000 rpm Fitting: Camlock D1-4'' Collet chuck: Schaublin B32 Fitur tambahan Multifix B ditambah 5 dudukan alat Chuck 3 dan 4 rahang Senter buntut Set collet B32 Instalasi pendingin Iodpfx Aox Ddamsahetr Heidenhain DRO (ND780, 3 sumbu) Lampu mesin Gir reduksi Perangkat penjepit cepat Dll.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Schaublin 135 High-Precision Lathe with NEW K&C 3-Axis Digital Readout and Accessory Cabinet in Excellent Condition from University Use! Technical Specifications: >> Center Height: 135 mm >> Distance Between Centers: 630 mm >> Swing over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock: MK3 >> Infinitely Variable Spindle Speeds: 55–3,000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Itedsx H Szyopfx Aahjr Accessories: >> New K&C 3-Axis Digital Readout, 12-month manufacturer warranty, with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zero setting, counting direction switching Accessory cabinet containing: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B, 3 insert holders >> Internal and external collets with quick-change system >> Change gears >> 4-jaw chuck >> Faceplate >> Fixed and travelling steady rests >> Coolant system >> Centre points >> Operating manual >> and much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in very good condition, coming from a university, and has seen little use. Equipped with a brand-new K&C 3-axis digital readout and extensive accessories. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 350735, Origin of manufacture: Switzerland Voltage: 400V Net weight: 1,570 kg Customs tariff code: 8458.1120 External dimensions: 1830 x 1260 x 1700 mm TECHNICAL DATA Capacities Maximum turning diameter: Ø 270 mm Maximum permissible diameter over cross slide: Ø 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Spindle speed, stepless: 50 – 5,000 rpm Internal spindle diameter (without clamping key): 39 mm Maximum bar capacity in collet W20: 14.5 mm Maximum bar capacity in automatic chuck: 32 mm Maximum recommended turning diameter: 200 mm Pneumatic clamping Adjustable axial clamping force at 5 bar: 1,150 daN Cross slide Cross travel, X-axis: 180 mm Resolution, X-axis (on radius): 0.0005 mm Drive: AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive: AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Working feed rates, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min Feed forces, X / Z axes, stepless: 503 / 503 daN Tool system: Turret Standardized tool holder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous / intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 – 5,000 rpm Maximum tool cross-section: 16 x 16 mm Integrated coolant supply and bi-directional indexing: yes Coolant Tank capacity: 55 L Pump flow rate: 10 L/min Pressure: 1.7 bar Pneumatic tailstock Taper of quill: Morse 3 External diameter of quill: 45 mm Quill stroke: 70 mm Adjustable support force: 25 – 260 daN Iodpfxjhr Rtne Aahotr Center height from floor: 1,162 mm All technical data is provided without guarantee and subject to change or error.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1968, feindrehmaschine-135-schaublin Iedpfew Rd Hbjx Aahotr

Kondisi: baik (bekas), Swing diameter over bed 270 mm Centre height 125 mm Centre distance 600 mm Spindle speeds 30-5000 rpm Control: FANUC 18i Manual Guide Itsdpfxetwpyae Aahjr Various accessories MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Schaublin tipe 125B dalam kondisi sangat baik. Spesifikasi: - Diameter putar di atas alas: 270 mm - Jarak antara senter: 500 mm - Kecepatan putaran: 40-3000 rpm Aksesori: - Digital readout Heidenhain ND780 pada 2 sumbu - Dudukan pahat Multifix dengan 6 holder - Chuck 3 rahang self-centering dengan rahang dalam dan luar - Set roda gigi pengganti Itodpfxjx Auv Ae Aahjr - 2 x chuck bor - Senter putar - Kaki mesin - Flens penggerak - Set collet dengan batang penarik - Pencahayaan mesin

Kondisi: hampir baru (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, lebar di tengah: 630 mm, lubang spindel: 40 mm, diameter pembubutan: 340 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 55 rpm, berat keseluruhan: 1.450 kg, Schaublin 150A Lathe Specification Manufacturer: Schaublin Model: 150 Year of manufacture: 1997 Control: conventional Max. turning diameter: 340 mm Distance between centres: 630 mm Main spindle Speed range: 55 to 3000 rpm Spindle mount: Camlock D1-4" Collet chuck: Schaublin B32 Extras Multifix B + 7 tool holders 3- and 4-jaw chucks Tailstock Collet set Coolant system Heidenhain DRO (2-axis) Machine lamp Taper gauge Quick-change toolpost Isdpfewgd R Hsx Aahstr Fixed and travelling steady rests Etc.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Schaublin 135 High Precision Lathe with 3-Axis Digital Readout ELESTA and Accessory Cabinet from University – Excellent Condition! Technical specifications: >> Centre height: 135 mm >> Centre distance: 630 mm >> Swing over bed: 315 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: Morse taper 3 >> Infinitely variable speeds from 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-Axis Digital Readout ELESTA (Heidenhain scales) Accessory cabinet containing: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B, 3 tool holders >> Internal and external collets with quick-change system >> Change gears >> Eccentric chuck >> Faceplates >> Fixed and travelling steady rests >> Coolant system Iodpex Hivnefx Aahstr >> Centre points >> Operating manual >> And much more About the machine: Offered is a Schaublin 135 high precision lathe. The machine is in very good condition, comes from a university, and has seen little use. Equipped with a 3-axis digital readout and extensive accessories. You have the opportunity to inspect the machine under power on site and see the condition for yourself.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Itedjw T Smhepfx Aahsr Customs tariff position: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstocks: Standardized spindle nose, allowing the use of various collets and chucks via adaptation accessories. Collet accessories for SCHAUBLIN: B45/F48 Maximum bar capacity, diameter: 36 mm / 42 mm Automatic chuck, standard diameter: 170 mm Direct drive by AC motor, power at 100% / 50% ED: 15 / 18.5 kW Maximum torque at 100% / 50% ED: 135 / 165 Nm Maximum spindle speed: 5000 min⁻¹ C-axis: Pneumatic clamping cylinder: 2700 daN Cross slide: Travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, rated torque: 3 Nm Ball screw, dia. x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, rated torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feed rates: Working feed, X/Z axes, stepless: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tooling system: Number of tool stations: 8 Standardized tool holder interface: VDI 30 Max. cutting tool section: 20 x 20 mm Integrated coolant supply Bi-directional indexing Coolant system: Tank capacity: 120 liters Pump flow: 10 l/min Pressure: 5 bar Unless otherwise indicated or in case of omission, the technical details above are provided without commitment.

Kondisi: bekas, Tahun pembuatan: 1999, de-to-hu-it-lt-001 Iedpfx Aaexlugmshjtr

Kondisi: sangat baik (bekas), Center height 125 mm Center distance 500 mm Spindle speeds 40-3000 rpm Various accessories Itsdelyrcispfx Aahjr MARCELS MACHINES CH

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Rectangular vertical table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed angle table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 250 mm Universal tilting table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 350 mm Swivel range in three planes, either side: 30°- 45°- 30° Spindle taper: - Horizontal spindle head: Iso 30 (40) - Vertical spindle head: Iso 30 (40) - High-speed universal head: SV E20+ES20 Swiveling in the vertical plane: Vertical spindle head: 360° Longitudinal travel (manual/automatic): 320/300 mm Vertical travel (manual/automatic): 375/355 mm Cross travel (adjustment handwheel): 150 mm Quill stroke: 60 mm Micrometer drum reading accuracy: 0.02 mm Main motor kW-rpm: 1.5/1500 Rapid traverse/feed motor kW-rpm: 0.45/3000 Coolant pump motor kW-rpm: 0.15/3000 Iedpfx Aow Uc Npeahstr Spindle speed range: - 1st range rpm: 58-375 - 2nd range rpm: 330-2000 Working feeds – longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical), mm/min: 1200 Unless stated otherwise, all technical data provided is without commitment and subject to possible errors or omissions.

Kondisi: baik (bekas), Dengan tampilan digital Dengan kepala bor dan frais Perjalanan 330 x 400 x 475 mm Area penjepitan meja 650 x 245 mm Kepala spindle ISO 40 Itedpfxew Nnuts Aahsr Kecepatan spindle 63-2.800 rpm Berbagai aksesori MARCELS MASCHINEN CH