Beli Scm Si 16 bekas (590)

Kondisi: sangat baik (bekas), Mesin Gergaji Panel SCM Si400e 9/24 Spesifikasi teknis: Panjang meja geser: 3200 mm Pengaturan sudut gergaji secara elektrik Pengangkatan gergaji secara elektrik Pengaturan pagar pemotong sisi kanan secara elektrik Lebar potong di kanan: 1270 mm Ketinggian potong maksimum: 130 mm Putaran gergaji dapat diatur dengan sabuk Putaran scoring saw: 6500 rpm Pelindung Sakelar pengaman Daya motor utama: 5,5 kW Daya motor scoring saw: 0,75 kW Dimensi keseluruhan: Tinggi: 1400 mm Lebar: 4300 mm Iedpjw Rkz Ssfx Adqotn Panjang: 3550 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Panel saw SCM Sigma Impact dengan pengisian belakang. Mesin sudah dibongkar. Isdew Rdkajpfx Adqetn

Kondisi: bekas, SCM Si400 EP Mesin Gergaji Panel, meja dorong 320 cm, pisau scoring 0,75KW, 2-sumbu, dapat diatur secara elektrik, Diameter scoring blade 120mm, lubang 20mm, kemiringan mata gergaji utama 45 derajat, diatur secara motorik, naik-turun mata gergaji utama dengan motor elektrik, Iedpfxsw Imn Ns Adqjtn pagar sisi kanan diatur secara motorik hingga 1460mm, motor utama 7,5KW (putaran 3000-4000-5000 rpm), maksimal diameter mata gergaji 400mm, display digital pada pagar di meja dorong, meja dorong dapat diatur sudutnya, mesin bekas, kondisi baik, semua pengaturan berfungsi.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Horizontal panel saw SCM SIGMA N Available September/October Ex-works price Itjdpfx Aow Du Ecodqsn Transport and installation available at extra cost.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Cutting length: 3,200 mm Itodehvan Ispfx Adqsn Cutting width: 3,200 mm Cutting height: 65 mm Maximum saw blade diameter: 300 mm Main saw motor: 5.5 kW Maximum scoring saw blade diameter: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. — 1 x 2,500 x 500 & 2 x 1,500 x 500 mm Office version for optimizing panel layouts Clamping grippers: 8 pcs Saw carriage height adjustment with THK guides Pressure beam with slotted passages Side aligner Pneumatic quick-change system for saw blade Extraction port diameter: 1 x 120 mm & 1 x 150 mm Setup dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg INVERTER NEW Note – Used Machines: • Technical information may be subject to error and prior sale. • Listed prices are ex-location and include free loading. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any claim to warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Carriage length: 3200 mm Electrically adjustable saw angle Electrically adjustable saw height Cutting width to the right: 1700 mm Main motor power: 7.5 kW Isdpfx Adelcfhtsqotn Scoring unit motor power: 0.75 kW Saw blade size max/min: 400/300 mm CE certified Year: 2001

Tahun pembuatan: 2010, Kondisi: hampir baru (bekas), I am selling an SCM Sigma Prima 67 panel saw, year of manufacture 2010. Cutting area: 3300 x 3200 mm Cutting height: 67 mm Max saw blade diameter: 320 + 160 mm Main motor: 5.5 kW Scoring motor: 1.1 kW Total power: 10 kW Overall dimensions: W 5400 mm x D 7000 mm Isdpfxji Evbzo Adqstn 8 grippers with pneumatic adjustment Side positioning rollers from above, pneumatic feed. WinCut optimization software included. Label printer included. Ottimo Perfect Cut software included. Very good condition. Available immediately.

Kondisi: baru, - NEW - Description Cutting level directly at the saw blade Heavy-duty grey cast iron steel construction Precision-guided aluminium sliding table, standard anodized finish Large support table guided on telescopic arm and adjustable lengthwise Extendable aluminium telescopic fence with professional flip stops, angle adjustable Parallel fence with quick clamping and fine adjustment Large worktable made from milled grey cast iron remains permanently flat Standard table extension and table widening enable easy handling of large workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-size saw unit made of cast iron is double-mounted on the table, guaranteeing stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with a scoring unit installed Equipment details: Double-trunnion saw unit - Large size, made of steel/cast iron - Positioned close to the saw blade, mounted on both sides for precision, smooth running, and durability - Height and tilt adjustable up to 45° via hand crank - Maximum cutting height even with scoring unit installed - Also available with scoring unit Telescopic fence - Extendable telescopic fence up to a max. of 2550 mm - Angle adjustable - With professional flip stops Aluminium sliding table - Proven ball contact system - Resistant to dust and dirt due to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on guideway wear Parallel fence with round bar guide - With fine adjustment and quick clamping - Sturdy round bar guide made of ground steel, 45 mm diameter - Standard fold-down feature for cutting large workpieces Technical data: Dimensions and weights Weight (net) approx. 380 kg Dust extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated operating mode S6 Current type AC Duty cycle drive motor 40 % Mains frequency 50 Hz Sliding table and worktable Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Ijdjvyuqfepfx Adqetn Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscut width left of saw blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilting 90 - 45° Saw blade speed 4000 rpm Art. No. 5504323

Kondisi: baru, - NEW - Description With TERSA cutterblock for change of planer knives in seconds The TERSA planer knife system enables particularly quiet operation Helically toothed steel infeed roller for constant and uniform wood feed The particularly long jointer tables, made from a single piece, allow for easy planing of workpieces Large planer fence can remain in position when opening the jointer tables Jointer tables open to the rear The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction. Work tables made from stress-relieved, annealed cast iron: durable, resistant, and permanently flat Table lips for quiet operation Equipment Details: TERSA planer cutterblock No more adjusting or screwing Knife change in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for jointing and thicknessing face in the same direction. Hose connection is from one side only. No hose needed to reach around the machine. Drive Sturdy chain drive design Drive wheels made of steel Massive cast iron bearing block Planing unit Heavy-duty anti-kickback fingers prevent workpiece kickback TERSA cutterblock with three knives ensures the best possible planing pattern Material feed Helically toothed steel infeed rollers provide constant and uniform material feed without marking Iedpfxovwga He Adqstn Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Technical Data: Dimensions and Weights Length (Product): approx. 2015 mm Weight (Net): approx. 330 kg Width/Depth (Product): approx. 990 mm Drive Power Drive motor power: 5 kW Jointer Total table length: 1800 mm Max. cutting depth (jointer): 4 mm Working height: 900 mm Extraction Connection Extraction port diameter (thicknesser): 2 x 120 mm Installation Information Space requirement, length: 2015 mm Machine body width/depth: 596 mm Space requirement, width/depth: 1460 mm Working area, length: 1000 mm Space Requirement Explanation Dimensions account for maximum travel or usable lengths. Working area, width/depth: 3500 mm Machine body length: 659 mm Working Area Explanation Add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. Thicknesser Thickness table length: 605 mm Max. workpiece height (thicknesser): 230 mm Thickness table width: 420 mm Max. cutting depth (thicknesser): 4 mm Min. workpiece height (thicknesser): 3 mm Electrical Data Connection voltage: 400 V Current type: AC Phase(s): 3 Ph Network frequency: 50 Hz Planer Cutterblock Cutterblock type: TERSA Cutterblock speed: 5200 rpm Cutterblock diameter: 72 mm Max. planing width: 410 mm Number of knives: 3 pcs Feed Feed speed: 7 m/min Scope of Delivery TERSA cutterblock Anodised aluminium planer fence No. 550 3414

Kondisi: bekas, Tahun pembuatan: 2022, termasuk 2 bak lem Ketebalan pelapisan tepi rol: 0,4 - 3 mm Ketebalan pelapisan tepi strip: 5 mm Tinggi benda kerja min - maks: 8 - 50 mm Kecepatan makan: 9 m/menit Unit pra-routing Unit lem Unit pemotong Unit pembulat Unit frais sejajar Pisau tarik radius Pisau tarik bidang Unit polisher Perangkat semprotan Lokasi penyimpanan: Pelanggan Iedpfx Aow Aig Sjdqjtn

Kondisi: sangat baik (bekas), 6368 TECHNICAL SPECIFICATIONS - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 7 spindles: 1) Bottom horizontal 230 mm 5.5 kW 2) Right vertical 130 mm 5.5 kW 3) Left vertical 130 mm 5.5 kW 4) Top horizontal 230 mm 7.5 kW 5) Top horizontal 230 mm 11 kW 6) Bottom horizontal 230 mm 18.5 kW 7) Universal 230 mm, 360-degree adjustable, 5.5 kW - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - Spindles 4 and 5 electrically adjustable up/down - 8 metal, knurled, driven feed rollers from above, including 2 double rollers - 4 rubber outfeed rollers from above - 2 top pressure devices Ijdpfx Ashfl T Iodqetn - Mechanical stops from below - 3 side pressure units from below - 2 smooth metal driven rollers from below - 2 double rubber driven rollers from below - Pneumatically pressed rollers - Feed via cardan shafts - Stepless feed speed adjustment: 5–36 m/min - Feed motor: 4 kW - Electric thickness adjustment motor: 0.75 kW - Infeed table length: 1980 mm - Enclosed in a cabin - Central table lubrication - Extraction port diameters: 5x120 mm, 2x150 mm - Dimensions (L/W/H): 5500 x 1840 x 1900 mm - Weight: approx. 5000 kg ADVANTAGES – Made in Italy – Equipped with 7 heads – For wet and dry timber – Last spindle is universal – Original paint (not repainted) – Used planer, very good condition Net price: 146,900 PLN Net price: 34,570 EUR (based on 4.25 EUR/PLN) (Prices may vary depending on exchange rate fluctuations)

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 5 Pusat pemrosesan CNC 5-sumbu SCM Accord 500 ini diproduksi pada tahun 2022. Sangat ideal untuk tugas pemesinan yang kompleks dan presisi, menawarkan teknologi kontrol canggih dan konstruksi kokoh. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin SCM Accord 500 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Itsdpfx Aoxnr Igsdqen Pemrosesan Kayu CNC

Kondisi: bekas, Tahun pembuatan: 2016, What are presale items at Second Owner? Presale items are machines that we sell in their current condition (“as-is”). We have purchased these machines solely based on photos and are reselling them with only the information provided in the listing. Unfortunately, we do not have additional details such as exact dimensions or technical specifications. Furthermore, these machines are often not yet in stock and have not been inspected by us. Isdoxb Tp Sjpfx Adqetn These machines are offered at attractive prices, which means the prices are lower than usual, but the risk is borne entirely by the buyer. Please check the information in the listing thoroughly before making a purchase. If you have any questions, please feel free to contact us! - Year of manufacture: 2016 - Documentation available: No - CE marking present: Yes Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for anything from the industrial sector Glenn Smeets

Kondisi: baru, Tahun pembuatan: 2025, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside. High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° backwards into the fence. Four spindle speeds. Forward and reverse rotation of the spindle moulder. Quick changeover to thicknesser thanks to parallel-opening jointer tables. 2-speed feed on the thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Supplied with a separate rip fence and separate jointer fence. Lockable main switch. Equipment details: Format fence Instant control Outrigger Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Guides riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty against wear on the hardened guideways. Grey cast iron double-trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Mounted close to the saw blade, supported on both sides. Height and tilt adjustable up to 45°. Scoring unit with separate 0.55 kW motor as standard. Double-trunnion moulder unit Large, tilting double-trunnion spindle moulder unit made of grey cast iron. Spindle fence Heavy-duty professional design. The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard. Three-way positionable for rapid return to preset settings. Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws. Planer units Helical-toothed steel infeed rollers for constant and uniform wood feed. Heavy-duty anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterhead ensures an optimal finish. Table lips for quieter operation. Tersa planing knife shaft Isdpfx Ajcnxa Sjdqjtn No setting or screwing required. Knife changes in seconds. Self-locking. Particularly quiet operation. Thickness table The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions. Special lifting mechanism keeps the table position stable even without locking. Parallel fence With fine adjustment and quick clamping. Robust round bar guide made of ground steel. Exchangeable aluminium rule. No measuring gap; guide rods overlap. Separate jointer fence Large professional design (1800 x 150 mm), tiltable 0-45°. Quick adjustment. Robust round bar guide made of ground steel. Simultaneous opening Model No. 5500557

Kondisi: bekas, Tahun pembuatan: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis travel length: 200 mm. Clearance height: 180 mm. The machine base is a monolithic construction made from thick-walled steel, reinforced throughout the machine bed with welded-in triangular plates for exceptional stability. The triangular design, particularly with a broad base for load-bearing components, is key to ensuring long-term precision and rigidity. The machine layout allows users optimal workflow with minimal space requirements. This chassis design provides the machining unit with a balanced and secure foundation, enabling outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on precision-ground prism guides using recirculating ball carriages. The working unit, mounted on it, also travels on prism guides and recirculating ball carriages for robust performance. Description of aggregates and standard accessories Drilling unit: Drill head with 10 + 4 spindles: · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm centering · Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) · Clockwise/anti-clockwise operation · Ceramic bearings · Included: 4 tool holders (right-hand), without collet Tool changer: · Lateral tool magazine, 7-fold (TR7), fully enclosed against chip contamination · 7 tool slots for HSK 63F tool holders, arranged in a row · Max. tool diameter: D=120 mm · Max. weight per tool holder: 4.5 kg · Max. total tool weight (TR7): 20 kg · Angle heads can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collets 3-20 mm (ER32) Isdpfx Adjw Aifzeqotn · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table: The work table is designed to provide the operator with maximum freedom of movement. The vacuum quick-clamping system allows for highly flexible, precise positioning and optimal workpiece holding. · 4 supports, 900 mm, steplessly manually adjustable in X · 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (left/right) · 1 stop in Y per support (6 in total) · Retractable reference stops, CNC-controlled · Includes: 4 plug-in adapters for vacuum cups · Standard pendulum processing (2 working zones) Axis movement: The X, Y, and Z axes are driven via precision-ground recirculating ball screws of the highest accuracy. The X-axis ball screw is centrally located for maximum performance.

Kondisi: sangat baik (bekas), 7739 Itsdpfxsxbp Ans Adqjn

Kondisi: bekas, Tahun pembuatan: 2012, CNC machining center SCM Morbidelli M-600 5-axis machine Year of manufacture: 2012 Machine no.: AA2/002032 Working range X-axis: 5,020 mm Ijdpfx Aownhccedqetn Working range Y-axis: 1,680 mm Working range Z-axis: 250 mm Tool changer positions: 36 Vertical drilling spindles: 24 Software: SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Liquid-cooled spindle SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity: 250 m³/h Machine dismantled for transport Weight: 7,450 kg - Drilling tools included: Yes - Vertical drilling spindles [qty]: 24 - Tool changer positions [qty]: 36 - System/Software: SCM Maestro - Vacuum pump included: Yes - Capacity [m³/h]: 250 - Working area X [mm]: 5,020 - Working area Y [mm]: 1,680 - Z-axis working area [mm]: 250 - Year of manufacture: 2012 - Documentation available: No - Serial number: AA2/002032 Financial Information VAT: The stated price is net of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Kondisi: baru, Tahun pembuatan: 2025, en:Tischfräse minimax twf 55 es M 3 UP Professional joinery machine with motorized height and tilt adjustment of the milling spindle, four speeds, and electronic control system Article Number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminum sliding table ✔ Handle on sliding table ✔ Milling fence FLEX ONE: Heavy-duty professional design, automatic adjustment of the entire milling fence according to tool diameter, manual chip removal adjustment, fence swiveling device, aluminum fence jaws with connecting rails Spindle height adjustment motorized Telescopic mitre fence with two flip stops Spindle tilt adjustment motorized Supporting table ✔ Control system Ready 3: Programmed movement of the milling unit in two axes, automatic adjustment of the entire milling fence based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Positioning of control elements Operator panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and Weights Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Suction port diameter 2 x 120 mm Work Table Table length 1200 mm Sliding table length 1200 mm Table width 530 mm Sliding table width 360 mm Table height 900 mm Sliding table height 142 mm Setup Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Explanation of space requirement: The dimensions include maximum traversing paths or usable lengths. Working area width/depth 2300 mm Iedpshp Rc Isfx Adqotn Machine body length 1200 mm Explanation of working area: Add the listed dimensions to the space requirement to determine the recommended free floor area for the machine. Electrical Data Supply voltage 400 V Drive motor power 5.0 kW Mains frequency 50 Hz Milling Spindle Spindle tilt 0 to -45° Milling spindle speed display Control system display Usable spindle length 125 mm Spindle shaft diameter 30 mm Spindle speeds 3500/6000/8000/10000 rpm Milling Tool Diameter (Max.) Maximum tool diameter 240 mm Maximum profiling cutter diameter 240 mm Maximum retractable tool diameter 230 mm

Kondisi: bekas, Tahun pembuatan: 2011, · Working area: 2,550 x 1,067 mm · Travel path X-Y: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting · Pneumatic advance stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with max. diameter 120 mm Main Milling Unit: · Tool holder: HSK 63F · Infinitely variable speed: 1,500 - 24,000 rpm via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Prepared for use with angle heads Tool Changer TR10 Automatic lateral tool change unit for 10 tools. · Number of tool positions: 10 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg each · Max. total tool weight: 28 kg A central extraction port combines all machining units into one connection with D = 200 mm. As a result, the required extraction capacity is reduced to approx. 3,200 m³/h. Work Table TVF The work table is designed to ensure maximum "freedom of movement" for the operator. The rapid vacuum clamping system allows for maximum flexibility with precise positioning and optimum holding of workpieces. · 4 TVF supports, L = 1,100 mm, continuously adjustable in X · 12 TVF vacuum cups, 120 x 120 mm, continuously adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · The retractable reference stops are CNC controlled Automatic Central Lubrication An electronic CNC control unit distributes the correct amount of grease (X, Y, Z axes) Vacuum System (Base Machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in the operator’s native language Safety devices with bumpers Technical data for the machine: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V, 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central exhaust port diameter: 200 mm Itedpfxjxpgw So Adqjn · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100mm and 18 vacuum cups 120x120 mm Cross laser for vacuum cup positioning Two cross lasers mounted to the unit carrier enable easy positioning of the vacuum cups. Location: Supplier’s warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, en-CASADEI F 25 LL FK - Spindle Moulder with Tilting Spindle and Table Extensions With Aigner integral fence and 3-roller power feeder - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle unit anchored to the worktable Especially sturdy build quality Smooth operation due to precision assemblies and high dead weight Standard with forward/reverse function and electronic locking during direction change 5 speeds from 3000 - 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for lasting precision Simple operation with control elements and speed display on the machine front Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Features: Spindle fence Spindle fence with crank/handwheel adjustment from the front With digital readout Interchangeable spindle MK 4 interchangeable spindle standard on all CASADEI F 23 and F 25 models Sliding table option Sliding table option for small tenoning tasks and slotting Scope of delivery: Manually tilting spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 interchangeable spindle Spindle fence with crank/handwheel adjustment from the front with digital readout Table extensions left and right (2500 mm length) Extending workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item No. 5220728 Iodpfx Adsxac Eyoqjtn Technical data Table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length with Ø 30-35 mm: 140 mm Usable spindle length with Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. cutter diameter for profiling: 250 mm Max. tenoning cutter diameter: 350 mm Max. grooving cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: in stock 54634 Bitburg - immediately available -

Kondisi: bekas, Tahun pembuatan: 2010, en-GB: · Working area: 2700 x 1300 mm · Travel range X-Y: 3070 x 1750 mm · Z-axis travel length: 270 mm · Clearance height: 180 mm The base frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, resulting in extremely high stability. The triangular form used for load-bearing elements, with a large base, is the key to ensuring long-term precision and stability. The machine layout allows the operator to achieve optimal workflow with minimal space requirements. The resulting base structure provides the machining unit with a balanced and secure foundation, ensuring optimal load distribution. The mobile unit carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides using recirculating ball carriages. The working unit is mounted on this mobile carrier via similarly prismatically ground guides and a recirculating ball carriage. Description of Units and Accessories (Basic) F12 Drilling Unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Pitch: 32 mm Itjdpfjxnld Isx Adqen · Drill holder: M10 with 11 mm register · Pneumatic stroke: 60 mm Grooving Saw Unit in X: · Integrated in the drill head · Grooving saw blade with diameter up to max. 120 mm Main Milling Unit: · Tool holder HSK 63F · Speed 1,500 – 24,000 rpm stepless via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Clockwise / counterclockwise rotation · Ceramic bearings (other power ratings optionally available) Tool Changer R4 Automatic tool changer for 4 tools, mounted on the rear unit carrier for fast tool access. · Number of tool stations: 4 · Max. tool diameter: 120 mm · Max. tool weight per slot: 4.5 kg · Max. total weight all tools: 16 kg · Slot for one angle head · Moves along X axis (other/larger changers optionally available) Work Table The work table is designed to guarantee maximum operator movement freedom. The quick vacuum clamping system provides maximum flexibility for precise workpiece positioning and secure holding. · 6 1000 mm pneumatic supports, infinitely adjustable in X · 12 round vacuum cups, D = 110 mm, infinitely adjustable in Y (2 pcs per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops CNC-controlled · Pendulum machining standard (2 working fields) --- other clamping systems optionally available --- Axis Motion The drive system for X, Y, and Z consists of ground recirculating ball shoes of the highest precision class. This characteristic is essential for balanced movement even during complex operations. Each axis is powered by brushless AC servo motors, which provide excellent positioning speeds owing to very short ramp-up times. Furthermore, these motors integrate the measuring system completely, making this drive system entirely maintenance-free. · Rapid traverse in ...

Kondisi: baru, Tahun pembuatan: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and cabinetmakers The especially long, one-piece jointer tables allow for easy straightening of workpieces Work tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening jointer tables with spring-assisted support for quick and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose during machine conversion, saving valuable working time Helically toothed steel infeed roller ensures a constant and uniform material feed Rubber outfeed roller at the end of the thickness planer guarantees even wood extraction Material feed with four speeds Planer thickness table adjustment via handwheel with integrated height display DIGITAL version: with electric thickness table height adjustment and digital display On/off switches positioned for operator convenience Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit installation Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length: 2250 mm Maximum cutting depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Explanation on space requirements: Dimensions take into account maximum travel distances or working lengths. Isdpfsff Hdpjx Adqetn Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Working length min.: 220 mm Maximum cutting depth: 5 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Line frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Kondisi: bekas, Tahun pembuatan: 2011, Grundmaschine Stk Volt 400 EU Stk #93.07.31 Serien 800 TV Arbeitsfelder 5020x1905 Stk # 52.19.14 8 Auflagen Matic (Y=1825 mm) mit 3 Grundmodulen Stk # 52.19.92 für Automatische Vakuumsauger Zusätzliches Grundmodul für Automatische Vakuumsauger Matic Stk # 52.19.99 4 Arbeitsfelder H= 50 Stk # 52.21.63 Vordere und Hintere Anschläge H=50- 8 Traverse Stk # 52.24.11 Integrierte Zusatzanschläge H=50 mm für 8 Traverse Stk # 52.24.15 Zentrale Doppelschiene (Agnehmbar) mit 6 Anschläge Stk # 52.24.18 H=50 mm Sauger TV 145 x 30 H50 Stk # 52.18.69 Sauger TV 145 x 55 H50 Stk # 52.18.70 Sauger TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Hilfen H50 Stk # 52.21.66 Gruppe 800 - Elektrospindel Prisma K 11 kW Stk # 52.21.80 Bohrkopf F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-Auf Pos.3 Elektrospindel PB+Rapid 6 Stk # 52.21.96 Werkzeugmagazin Rapid 12 on Board (X,Y-Mitfahrend) Stk # 52.22.90 Stk # 52.22.92 Vakuumpumpe mit 250 (300) M3/H50(60) HZ Stk # 52.21.97 Lagerort: Lieferant Itedsxnldhopfx Adqjn

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Itjdpfx Adsxnldbjqsn

Kondisi: bekas, Tahun pembuatan: 2012, Base machine Olimpic K 800 "T-ERL" (47), 1 pc STANDARD EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of work units - Swiveling control console - Support roller conveyor with ball-bushing guides along entire machine length - Protective and noise-reduction hood with separate doors between gluing and finishing units - Extraction ports arranged on the noise reduction hood - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber sliding pads, featuring a high coefficient of friction, mounted on 1¼” industrial chain - The chain runs on 2 guides made of hardened and ground steel, one round and one flat, to ensure straight feed and prevent lateral deviation - Automatic central lubrication for the feed chain - The upper pressure beam is a thick-walled steel structure fitted with double rows of roller bearings and protective device for pressure rollers - Manual lifting of the pressure unit with automatic positioning of the working units when changing panel thickness - Mechanical digital display for monitoring selected panel thickness CONTROL “ORION 100” Control system with PLC, allowing fast, simple, and error-free execution of individual processing programs (max. 60 programs). Manages pneumatic positioning of units, if equipped on the machine. (The control system does not include pneumatic positioning.) - Alphanumeric keypad and display - Function keys for quick access to processing units - Operating temperature range from 0 to +45°C MAIN FUNCTIONS: - Control of work units and automatic activation of motors - Monitoring and adjustment of glue pot temperature - Selection between longitudinal and cross processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: quantity, edge tape consumption, total chain feed distance - Measurement unit selectable in mm or inches Technical data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max edgebanding thickness, roll material: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. dimensions of edge strip: 135 mm² Rotary table diameter: 780 mm Max. excess relative to panel thickness: 4 (2+2) mm Min. panel width (with minimal 210 mm length): 55 mm Min. panel length (with minimal 100 mm width): - with strip or roll edge max 3 mm: 140 mm - with solid wood edge: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard equipment: - Pre-milling unit at infeed RT-E - Edgebanding station VC-800 Iedpfsxnlbyjx Adqotn - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for flat scraper - 1 S free space for flat scraper, universal mill, or buffing unit - 1 F free space for blowing nozzle unit European safety regulations (CE marking) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for versions ER2, T-ERS, and T-ERL Enables all necessary adjustments during every job change, directly from the control console. Includes: - Time-controlled pressure unit - Pneumatic and independent swiveling of the end saw blades (front/rear) - Pneumatic remote adjustment for the flush trimming unit RI/800