Beli Stock bekas (12.951)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
iklan kecil
Goldenstedt
11.124 km
Gunting baja batang
HEZELScherscheiben
Hubungi
Kondisi: bekas, Sold is a single pair of shear discs for a manual cut-to-length device, presumably for AMH 3, formerly Gebr. Hezel, now Staco.
Shear disc diameter: 160 mm
Cajdpfxork Tgtj Aarea
Shear disc thickness 1: 47.88 mm
Shear disc thickness 2: 48.77 mm
Center bore: 40 mm
Pin bore: 14 mm
Threaded bore: M12
Shearing holes: 5 x Ø 20 mm; 5 x Ø 15 mm
iklan kecil
Wiefelstede
11.134 km
Stok pemotongan benang
Central3/8"-1"
Hubungi
Kondisi: bekas, Thread cutting head with chasers, thread cutting stock, thread cutting machine, pipe thread cutter
- Thread sizes: 3/8" - 1" BSP
- Supplied in carrying case
Casdpsb A Rlvjfx Aaroa
- Weight: 5 kg
iklan kecil
Wettenberg
11.158 km
Genset langsung dari stok
Atlas CopcoTyp Atlas Copco P 2500i AP S5 50Hz 230V
Hubungi
Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: AN2301155, Atlas Copco Generator P2500i
The Atlas Copco P2500i portable inverter generator is a lightweight, efficient, and reliable source of mobile power supply.
Thanks to its high fuel efficiency and compact dimensions, this generator is highly versatile, making it suitable for everyday use and frequent, individual jobs. It is typically used for powering electric tools as an inverter generator or as an emergency power unit.
Thanks to excellent sound insulation, the emergency generator operates very quietly—barely louder than an electric shaver. Equipped with a large fuel tank, the generator can run for up to six hours before needing to be refueled. Despite the large tank, the generator remains compact and light enough to be conveniently transported across job sites or stored with minimal space requirements.
The intelligent, variable speed control, together with the option for parallel operation, ensures efficient power supply with minimal fuel consumption by adjusting engine speed according to the current load conditions.
Key Features: Atlas Copco Inverter Generator P2500i
- Recoil starter
- Large fuel tank
- Low oil level sensor
- Overheat protection
- Sound-insulated enclosure, CE-compliant noise level, quiet
- Sockets
- Inverter technology for stable voltage and frequency
- Engine alarm: low oil, overload
- Variable speed control for optimal fuel efficiency
- Connections and cables for parallel operation
Technical Specifications:
Voltage: 230V / 50Hz
Peak Output: 2.5 kVA
Rated Output: 2.3 kVA
Tank Volume (l): 4.0
Starter Type: Recoil
Weight (kg): 27.0
Fuel: Petrol
Cajdel R Hy Aopfx Aarja
Max Sound Pressure Level (LPA) at 7 m: 63.0 dB(A)
Sound Power Level (LwA): 88.0 dB(A)
Outlets: 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
iklan kecil
Langenfeld (Rheinland)
11.262 km
EKG istirahat
GE cam connect 14incl. CardioSoft V7 many in stock
Hubungi
Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, In this offer, you are purchasing a nearly new resting ECG "GE CAM Connect 14"
Scope of delivery:
Cedpewr Anbjfx Aarjaa
1 x GE CAM Connect 14 with the following features:
- Mobile, portable resting ECG
- 12 or 15 leads
- Easily integrable into MUSE and PACS systems
- With automatic arrhythmia detection
- DICOM compatible
Condition:
This offer concerns a used device, which may show signs of previous use (minor scratches or discoloration).
The device has been tested for full functionality.
Packaging and shipping:
You are welcome to inspect the device during our business hours. Please arrange an appointment in advance!
Seaworthy packaging and worldwide shipping available upon request!
For further information, please feel free to contact us personally.
iklan kecil
Bühl
11.236 km
Pengumpan bar
SYMCOKH-16
Hubungi
Kondisi: bekas, Tahun pembuatan: 1999, Diameter 3 - 16 mm
Length 3000 mm
= automatic bar feeder
For bar diameters 3 - 16 mm, bar length 3000 mm, capacity e.g.
Cajdpetqqp Iefx Aarsa
23 bars of 8 mm diameter each
Temukan lebih banyak mesin bekas
iklan kecil
Bad Honnef
11.249 km
Mesin pengamplasan tepi KSO 150 M F 3 PRO model penawaran khusus Holzkraft dari stok
HOLZKRAFTKantenschleifmaschine KSO 150 M F 3 PRO Holzkraft
Hubungi
Kondisi: baru, KSO 150 M F 3 PRO edge sanding machine by Holzkraft
Promotional model, available from stock
Includes:
- 1x sanding belt K100
- 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm
- 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm
- toolkit
- mitre guide
Dimensions and weights:
- Length (product): approx. 1820 mm
Casdpfxsu R S Dze Aarsa
- Width/Depth (product): approx. 1050 mm
- Height (product): approx. 1470 mm
- Weight (net): approx. 400 kg
Drive power:
- Oscillation motor output: 0.38 kW
Extraction connection:
- Extraction port diameter: 150 mm
Worktable(s):
- Worktable length: 1000 mm
- Worktable width: 280 mm
- Table tilting: 45 / 35 °
Electrical data:
- Connection voltage: 400 V
- Line frequency: 50 Hz
Sanding unit:
- Sanding belt length: 2640 mm
- Sanding belt width: 150 mm
- Belt running speed: 14 m/s
- Oscillation stroke: 20 mm
- Sanding surface length: 890 mm
- Sanding surface width: 150 mm
- Max. sanding height: 150 mm
Subject to prior sale.
- new showroom machine -
iklan kecil
Legden
11.288 km
Truk pengangkut ternak
MERCEDES-BENZAntos 1833 EU6 2.Stock KaBa Vieh. m. Hubdach
Hubungi
Kondisi: bekas, jarak tempuh: 477.870 km, daya: 240 kW (326,31 hp), pendaftaran pertama: 04/2013, berat keseluruhan: 18.000 kg, jenis bahan bakar: diesel, warna: merah, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 11/2025, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, lebar ruang muat: 2.450 mm, panjang ruang muatan: 6.260 mm, tinggi ruang muatan: 2.775 mm, lebar total: 2.550 mm, tinggi total: 4.000 mm, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),
iklan kecil
Wiefelstede
11.134 km
Stok pemotongan benang
Prever1/2" / 3/4" / 1"
Hubungi
Kondisi: bekas, Thread cutting head with steel jaws, pipe threading die
- Thread sizes: 1/2"–3/4"–1" BSP
- Weight: 5 kg
Codpfx Asb A N U Rjarsaa
iklan kecil
Wettenberg
11.158 km
Generator daya 3 kVA segera dari stok
Atlas CopcoP 3500i AP S5 50Hz 230V
Hubungi
Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: AN2301155, Atlas Copco Generator P3500i
The mobile inverter generator Atlas Copco P3500i is a lightweight, efficient, and reliable source of portable power supply.
Thanks to its high fuel efficiency and compact dimensions, this generator is highly versatile for everyday use, repeated individual tasks, typically powering electric tools as an inverter generator or serving as an emergency power unit.
With effective sound insulation, this emergency generator operates very quietly—hardly louder than an electric shaver. It is equipped with a large fuel tank, providing up to six hours of runtime before refueling is required. Despite the large tank, the generator remains compact and lightweight enough to transport across construction sites or to store in a space-saving manner.
Smart, variable speed control combined with the option for parallel operation delivers efficient power supply with minimal fuel consumption, as the engine speed is automatically adjusted to match the current load conditions.
Key features: Atlas Copco Inverter Generator P 3500 i
Caedel R Hz Sepfx Aaroa
- Pull starter
- Large fuel tank
- Low oil level sensor
- Overheating protection
- Soundproofed enclosure, CE-compliant noise level, quiet operation
- Sockets/outlets
- Electric key start (12V)
- Inverter technology, stable voltage and frequency
- Instrumentation: Voltmeter, hour meter
- Circuit breaker
- Wheels
- Engine alarms: low oil level, overload
- Intelligent speed control for fuel efficiency
- Parallel operation ports (parallel operation kit with cables optionally available)
Technical specifications:
- Voltage: 230V / 50Hz
- Peak power: 3.3 kW
- Rated power: 3.0 kW
- Tank capacity (l): 10.0
- Starter type: Electric / recoil
- Weight: 45.0 kg
- Fuel: Petrol
- Max. sound pressure level (LPA) at 7 m: 63.0 dB(A)
- Sound power level (LwA): 88.0 dB(A)
- Outlets: 2x Schuko 2P+G 16A | 2x Nema 240/120V twist lock
iklan kecil
Bydgoszcz
10.480 km
TERSEDIA DI GUDANG mesin press tekuk 125x3200 OT-41
OtinusPBO-3212-CNC OT-41
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3212-CNC OT-41
Technical Specifications
- Nominal force: 1250 kN
- Maximum bending length: 3200 mm
- Throat depth (distance between tool and rear wall): 320 mm
- Maximum stroke of the bending beam: 120 mm
- Maximum open height: 390 mm
- Distance between uprights: 2700 mm
- Maximum backgauge travel: 600 mm
- Motor power: 7.5 kW
- Length: 3870 mm
- Width: 1550 mm
Cedsgi Dk Depfx Aarjaa
- Height: 2400 mm
- Weight: 6700.0 kg
Equipment
- Front support arms: 2 pcs.
- Backgauge adjustment (X-axis): Servo drive
- Beam adjustment (Y-axis): Servo drive
- Height adjustment of gauge fingers (R-axis): Manual
- Punch clamping system: Quick-release, AMADA-type
CNC OT-41 Control
The Otinus CNC control system features a user-friendly, intuitive menu. The software independently calculates the bending angle. The large color touchscreen is clearly readable from any angle.
Manual crowning (optional*)
This option ensures that the bent sheet has a consistent bending angle along its entire length.
Automatic crowning (optional*)
Allows the controller to monitor automatic crowning, ensuring the set value is always optimally adjusted.
OCS – Oil Cooling System
The oil cooling system guarantees machine parameter stability even during prolonged continuous operation.
Expert Support
We ensure constant communication with our customers by offering an hourly support package with every machine purchase, provided by Otinus specialists.
Visit and Test Our Machines
Take part in a specialized demonstration led by a qualified Otinus technician covering all machine functionalities. You are welcome to provide technical drawings and sample material.
Machine delivery includes:
A two-day operator training and commissioning
- Day 1 (up to 8 hours) – Commissioning and control system training.
- Day 2 (up to 8 hours) – Independent work on the machine under the supervision of our technician, including the option to program specific parts.
Telephone consultation with a specialist
- From 7:30 to 21:00 (Mon-Sat) – an 8-hour package, to be used within 12 months.
Free rental of transport rollers and two jacks for easier setup at the customer’s site. Rollers and jacks are provided upon prior request (minimum 7 days before machine delivery).
Terms of Cooperation
- 24-month warranty period.
- Delivery time: approx. 6–8 weeks.
Not applicable if the machine is marked as available from stock.
- The machine is brand new
- Warranty and post-warranty service provided by the seller
- The customer is responsible for the machine during unloading and transport on their premises.
iklan kecil
Bühl
11.236 km
Pengumpan bar
IRCOILS-RBE 7208
Hubungi
Kondisi: bekas, Tahun pembuatan: 1999, Diameter 15 mm
Length 800 mm
Caedpfx Aaovh I Uaorea
= Bar feeder and unloader magazine
For bars up to 15 mm diameter, bar length 800 mm
iklan kecil
Legden
11.288 km
Trailer angkut kuda
Stehmann 1.Stock Viehanhänger Bj.2013
Hubungi
Kondisi: bekas, berat keseluruhan: 13.400 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 04/2013, panjang ruang muatan: 7.300 mm, lebar ruang muat: 2.460 mm, tinggi ruang muatan: 2.000 mm, Perlengkapan: ABS,
iklan kecil
Wiefelstede
11.134 km
Set stok pemotongan benang
LUX541 424 R1/2- R1 1/4
Hubungi
Kondisi: baik (bekas), Thread cutting head with Strehler jaws, pipe threader, thread cutting die stock, hand-operated threader, threading die set, ratcheting threader
- Manufacturer: LUX, Hand Threading Die Set 541 424
- Die heads: R1/2", R3/4", R1", R1 1/4", 1 ratchet handle
- Carrying case
- Case dimensions: 360/340/H100 mm
Caodpovmhfpofx Aaroa
- Weight: 5.4 kg
iklan kecil
Bydgoszcz
10.480 km
Tersedia dari stok mesin press tekuk 80x2500 OT-41
OtinusPBO-2580-CNC OT-41
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-2580-CNC OT-41
Technical Specifications
- Rated pressure: 800 kN
- Maximum bending length: 2500 mm
- Depth (distance between tool and rear wall): 250 mm
- Maximum stroke of the bending beam: 120 mm
- Maximum opening height: 385 mm
- Distance between uprights: 2000 mm
- Maximum backgauge travel: 600 mm
- Motor power: 5.5 kW
- Length: 2600 mm
- Width: 1450 mm
- Height: 2300 mm
- Weight: 4500.0 kg
Tooling
- Front supports: 2 pcs
- Backgauge (X-axis) adjustment: Servo drive
- Beam (Y-axis) adjustment: Servo drive
- Height adjustment of backgauge fingers (R-axis): manual
- Punch clamping system: Quick-change AMADA-type
CNC OT-41 Controller
The Otinus CNC controller features a user-friendly and intuitive menu. The software automatically calculates the bending angle. The large color touchscreen is easy to read from any angle.
Manual crowning (optional*)
This feature allows the customer to ensure that the workpiece has a consistent bending angle along its entire length.
Codpfx Ash Ranloaroaa
Automatic crowning (optional*)
Allows the control unit to monitor and adjust automatic crowning. This ensures that the ultimate setting value is always optimized.
OCS - Oil Cooling System
The oil cooling system ensures consistent machine parameters, even during prolonged continuous operation.
Professional support
We remain in constant contact with our customers. With every machine purchase, we offer a package of support hours by Otinus technicians.
Visit and test our machines
Attend a dedicated demonstration by a qualified Otinus technician covering all functionalities of the machine. You are welcome to provide technical drawings and sample material.
Machine delivery includes:
A two-day operator training and commissioning session
- Day 1 (up to 8 hours) – Commissioning and control training
- Day 2 (up to 8 hours) – independent operation under our technician’s supervision, including programming of specific parts
Telephone support by a specialist
- From 7:30 to 21:00 (Mon–Sat): An 8-hour support package to be used within 12 months
Free loan of transport rollers and two lifting jacks to facilitate setup at the customer’s site. Rollers and jacks must be requested at least 7 days prior to machine delivery.
Terms of cooperation
- 24-month warranty period
- Delivery time: approx. 6–8 weeks
(Unless machine is indicated as available from stock)
- The machine is brand new
- Warranty and post-warranty service by the seller
- The customer is responsible for the machine during unloading and on-site transport.
iklan kecil
Legden
11.288 km
Trailer angkut kuda
Top Zustand !!KA-BA 2.Stock Viehanhänger
Hubungi
Kondisi: bekas, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 02/2000, inspeksi berikutnya (TÜV): 02/2025,
iklan kecil
Bydgoszcz
10.480 km
AB LAGER Tukang las laser genggam 3000W
OtinusLWH-3000-N Relfar FWH20-S10A
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Handheld Laser Welding Machine LWH-3000-N Relfar FWH20-S10A
Scope of delivery includes:
- Laser welding unit with cooling system
- Welding gun with adjustable focal length and accessory kit
- Fiber laser source from MAX Photonics or Raycus
- Automatic wire feeder
- Hose and cable set
- Starter kit with nozzles and protective glasses
Technical Specifications
- Laser power: 3,000 W
- Laser wavelength: 1,064 nm
- Welding speed: up to 120 mm/s
- Power supply: 3x400 Hz
- Dimensions (with gun holder): 630x1300x1500 mm
Price includes
One-day operator training and machine commissioning
- Day 1 (up to 8 hours) – Commissioning and training
Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning
Otinus laser welding units are supplied with a set of nozzles and protective glasses. This makes the machine highly versatile and helps save on purchase costs, as for example there is no need to buy a separate handheld plasma cutter or an additional device for rust and paint removal.
Operation
Thanks to the revolutionary welding system, any operator can achieve excellent results after a brief training period.
The cable provides the welder with the flexibility to work in multiple locations without moving the device. The minimal heat-affected zone prevents excessive distortion. The weld seam is applied very quickly and efficiently, ensuring a proper and robust weld joint.
Intended Use
The laser welding machine is designed for professional use in workshops and production facilities requiring high-quality and aesthetically pleasing weld seams.
Laser Source Specifications:
1,000 W
- Carbon steel: up to 3 mm
Casdoup Uzxepfx Aarea
- Stainless steel: up to 3 mm
- Aluminium: 2 mm
- Brass: 0.8–1 mm
1,500 W
- Carbon steel: up to 4 mm
- Stainless steel: up to 4 mm
- Aluminium: 3 mm
- Brass: 1 mm
2,000 W
- Carbon steel: up to 5 mm
- Stainless steel: up to 5 mm
- Aluminium: 4 mm
- Brass: 2 mm
3,000 W
- Carbon steel: up to 8 mm
- Stainless steel: up to 8 mm
- Aluminium: 7 mm
Design
The gun cable offers maximum freedom of movement and facilitates welding in various positions. The integrated controller with a large, clear display is intuitive to operate. The unit is equipped with a high-performance cooling system, allowing continuous use under demanding conditions, including three-shift operation.
Operating Principle
The laser welding machine uses laser heat to melt the welding wire and the edges of the parts to be joined. The beam is focused and directed at the welding wire, which is fed via the wire feeder, and the contact area. When the trigger is pressed, the welding gun must be guided along the weld line in accordance with the wire feed speed. A constant operating temperature for the laser source and gun is maintained by a water-cooled system. The beam power and cooling are controlled by a controller that monitors parameters according to user settings.
iklan kecil
Bydgoszcz
10.480 km
DARI STOK Mesin las laser 2kW Relfar
OtinusLWH-2000-N Relfar FWH20-S10A
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Handheld Laser Welding Machine LWH-2000-N Relfar FWH20-S10A
Scope of delivery:
- Laser welding machine with cooling system
- Welding gun with adjustable focal length and accessory kit
- Fiber laser source from MAX Photonics or Raycus
- Automatic wire feeder
- Hose and cable set
- Starter kit with nozzles and protective lenses
Technical Parameters
- Laser power: 2000 W
- Laser wavelength: 1064 nm
- Welding speed: up to 120 mm/s
- Power supply: 3x400 Hz
- Dimensions (including head mount): 630x1300x1500 mm
Included in the price
One-day operator training and machine commissioning
- Day 1 (up to 8 hours) – Commissioning and training
Cajdpfx Ash H Ngtearea
Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning
Otinus laser welding systems are supplied with a range of nozzles and protective lenses. This makes the machine highly versatile and enables significant cost savings, as it eliminates the need to purchase a handheld plasma cutter or an additional device for removing rust and paint.
Operation
Thanks to the revolutionary welding system, any operator can achieve excellent results after brief training. The cable allows the welder to work freely in several locations without moving the unit. The minimal heat-affected zone prevents excessive distortion. Weld seams are applied quickly and efficiently, resulting in strong and precise joints.
Intended Use
The laser welding machine is designed for professional use in workshops and industrial settings requiring high-quality, aesthetic weld seams.
Laser source specifications:
1000 W
- Carbon steel: up to 3 mm
- Stainless steel: up to 3 mm
- Aluminium: 2 mm
- Brass: 0.8–1 mm
1500 W
- Carbon steel: up to 4 mm
- Stainless steel: up to 4 mm
- Aluminium: 3 mm
- Brass: 1 mm
2000 W
- Carbon steel: up to 5 mm
- Stainless steel: up to 5 mm
- Aluminium: 4 mm
- Brass: 2 mm
3000 W
- Carbon steel: up to 8 mm
- Stainless steel: up to 8 mm
- Aluminium: 7 mm
Design
The torch cable provides maximum freedom of movement, making welding in various positions easier. The integrated controller, featuring a large, user-friendly display, is highly intuitive. The system is equipped with a robust cooling system, allowing reliable use in demanding three-shift operation environments.
Operating Principle
The laser welding unit melts the filler wire and the edges of the components using laser heat. The laser beam is focused and directed at the welding wire via the wire feed, precisely at the contact point. When the trigger is pressed, the torch must be guided along the weld line matching the wire feed speed. A constant operating temperature of the beam source and torch is maintained by a water-cooling system. Laser output and cooling are managed by a controller that regulates parameters according to user settings.
iklan kecil
Bydgoszcz
10.480 km
READY STOCK Mesin press tekuk hidrolik 160x3200 OT-41
OtinusPBO-3216-CNC OT-41
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3216-CNC OT-41
Technical Specifications
- Nominal pressing force: 1600 kN
Cedogi Dlpepfx Aareaa
- Maximum bending length: 3,200 mm
- Depth (distance between tooling and rear wall): 320 mm
- Maximum ram stroke: 180 mm
- Maximum open height: 455 mm
- Distance between frames: 2,600 mm
- Maximum backgauge travel: 600 mm
- Motor power: 11.0 kW
- Length: 3,300 mm
- Width: 1,650 mm
- Height: 2,500 mm
- Weight: 8,800.0 kg
Tooling
- Front supports: 2 pcs
- Backgauge positioning (X-axis): Servo-driven
- Ram positioning (Y-axis): Servo-driven
- Backgauge finger height adjustment (R-axis): Manual
- Punch clamping system: AMADA-type quick release
CNC OT-41 Control
The Otinus CNC controller features a user-friendly and intuitive interface. The software automatically calculates the bending angle. The large color touchscreen provides excellent readability from any angle.
Manual Crowning (optional*)
This feature ensures consistent bending angles along the entire workpiece length.
Automatic Crowning (optional*)
Allows the controller to monitor and adjust crowning automatically, securing consistently optimal parameter settings.
OCS - Oil Cooling System
The oil cooling system guarantees stable machine parameters even during extended continuous operation.
Professional Support
We maintain continuous contact with our customers. Upon purchasing a machine, we offer an hours package for professional support by Otinus technicians.
Test Our Machines On-Site
Take part in an exclusive demonstration led by a qualified Otinus technician covering the full machine functionality. You are welcome to provide technical drawings and sample materials.
Machine Delivery Includes:
A two-day operator training and commissioning session:
- Day 1 (up to 8 hours): Commissioning and training in operating the controller.
- Day 2 (up to 8 hours): Independent machine operation under technician supervision, including programming of specific parts.
Telephone consultation with a specialist
- From 7:30 am to 9:00 pm (Mon–Sat) – an 8-hour support package to be used within 12 months.
Free rental of transport rollers and two lifting jacks for easier machine installation at your premises. Rollers and jacks are supplied upon prior request (minimum 7 days before machine delivery).
Terms of Cooperation
- 24-month warranty
- Delivery time: approx. 6–8 weeks.
Does not apply if machine is marked available from stock.
- Machine is brand new
- Warranty and post-warranty service by the seller
- Customer is responsible for the machine during unloading and transportation on their premises.
iklan kecil
Bydgoszcz
10.480 km
Gunting plat tersedia di gudang 4x3200
OtinusSMO-3204-N
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Attention – Special Offer!!
First warranty inspection completely free of charge: Special offer valid only for customers who participated in a demonstration prior to purchase – at the Otinus machine showroom in Bydgoszcz.
Some of our machines are AVAILABLE FROM STOCK.
Hydraulic Guillotine Shear “SMO-3204-N QC12Y 4x3200”
Technical Specifications
- Maximum cutting thickness for mild steel (S235): 4 mm
- Maximum cutting length: 3,200 mm
- Cutting angle: 1.5°
- Strokes per minute: 8–12
- Backgauge travel: 600 mm
- Motor power: 5.5 kW
- Length: 3,950 mm
- Width: 1,670 mm
- Height: 1,800 mm
- Weight: 4,200 kg
Equipment
- Power-driven backgauge (with ball screw spindles)
- Hydraulic sheet clamps along full cutting length
- Blade clearance adjustment
- Ball transfers on the table for sheet support
- Work area lighting
- Front support arms
- Mobile foot pedal
Rear Chute
The rear chute is fitted with ball transfers to prevent cut pieces from remaining on the machine.
E21S Controller
(Mounted on a movable arm on the left side of the machine)
- Backgauge control
- Ability to store up to 40 programs – with up to 25 steps in each program
- Backgauge retraction function
- Parameter memory at the push of a button
- Retains parameters after power loss
High-quality Components
- German branded hydraulic valve by Rexroth
- Main motor licensed by Siemens
- Electrical components by Schneider
Hydraulic steel connections
Hydraulic lines made from steel pipes instead of rubber hoses, reducing the risk of future leaks.
Ergonomics
Thanks to the mobile controller and the operator panel on the movable arm, the operator can move freely throughout the machine’s working area. Additional LED lighting and a laser pointer ensure optimal visibility of the workpiece in any situation.
Safety
We place special emphasis on the safety of our customers and their employees – that’s why our press brakes come with visible markings, protective covers, a rear safety gate, and easily accessible safety switches.
Cedpfevvuitex Aarjaa
The machine comes with carefully prepared German-language operating instructions.
The device is supplied with a CE Declaration of Conformity.
OCS – Oil Cooling System
The Oil Cooling System ensures machine performance remains stable even during long periods of continuous operation.
PCS – Pressure Control System
The Pressure Control System guarantees dependable performance of the blade for many years.
Specialist Assistance
We ensure ongoing communication with our customers. That’s why we include, with the purchase of each machine, an assistance package granting you access to Otinus specialist support hours.
Our staff can, as part of the service:
- Determine bending steps for complex parts,
- Advise on material and tool selection,
- and help choose operating parameters for different materials.
Remaining available assistance hours can be checked in the Otinus customer panel.
iklan kecil
Bydgoszcz
10.480 km
AB LAGER gunting guillotine 8x3200
OtinusSMO-3208-N
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Guillotine Shear SMO-3208-N QC12Y 8x3200
Technical Specifications
- Maximum sheet thickness (S235): up to 8.0 mm
- Maximum cutting length: 3200 mm
- Cutting angle: 1.5°
- Strokes per minute: 10 - 15
- Maximum backgauge distance: 600 mm
- Motor power: 11.0 kW
- Length: 4300 mm
- Width: 2000 mm
- Height: 2100 mm
- Weight: 6,400.0 kg
Equipment
- Rear backgauge powered by electric motor (ball screw drive)
- Hydraulic sheet clamping over the entire cutting length
- Blade clearance adjustment
- Transfer balls on the working table
- Work area lighting
- Front supports
- Mobile foot controller
Casdpfxoh Rah Us Aarja
E21S Control System
(Mounted on a moveable arm on the left side of the machine)
- Backgauge control
- Capability to store 40 programs – up to 25 different steps per program
- Retraction function
- Parameter saving at the touch of a button
- Parameter memory retention in the event of a power failure
Steel Hydraulic Connections
Steel pipe hydraulic connections instead of rubber hoses reduce the risk of future leaks.
OCS - Oil Cooling System
The oil cooling system ensures machine parameters remain stable even during extended periods of continuous operation.
PCS - Pressure Control System
The pressure control system ensures reliable blade operation for many years.
Expert Support
We ensure ongoing contact with our customers. Therefore, each purchased machine includes several hours of Otinus Specialist Support.
Technical Consultation
Our technicians assist in selecting the right machine and appropriate accessories based on the technical drawings of the parts to be manufactured.
Visit and test our machine
Take part in an exclusive demonstration where a qualified Otinus technician presents the full functionality of the machine. You may provide technical drawings and sample materials.
Included with the machine:
One-day operator training and commissioning
- Day 1 (up to 8 hours): Commissioning and control system training.
Telephone consultation with a specialist
- From 7:30 to 21:00 (Mon-Sat): An 8-hour support package to be used within 12 months.
Free rental of transport rollers and two lifting jacks to facilitate on-site installation at the customer. Rollers and jacks must be requested in advance (minimum 7 days before machine delivery).
Terms of Cooperation
- 24-month warranty period.
- Delivery time: approx. 10 - 12 weeks. Not applicable if the machine is marked as available from stock. - The machine is brand new
- Warranty and post-warranty service provided by the seller
- The customer is responsible for the machine during unloading and transport within their premises.
iklan kecil
Bydgoszcz
10.480 km
Mesin pemotong plasma tersedia stok 2020x6100
OtinusPCO-6020-DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, CNC Plasma Cutting System PCO-6020-DG
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 2020 x 6100 mm
- Clearance between table surface and gantry: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (cutting speed depends on plasma source output and material thickness): 25,000 mm/min
Cedpfoh E Izfex Aaroaa
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 6750 mm
- Width: 2780 mm
- Height: 1500 mm
- Total weight: 2700.0 kg
- Maximum load capacity: 7000.0 kg
- Adjustable support legs: 10
Systems
THC – Torch Height Controller: Integrated cutting height control system automatically adjusts torch distance to the material, based on real-time analysis of source voltage variations.
AMS – Align Material System: Automatically corrects for material angle information in relation to the table.
Come and Test Our Machines
Take part in an exclusive demonstration where a qualified Otinus technician will present the full functionality of the machine. You can also try out how the equipment suits your requirements. You are welcome to bring technical drawings and sample material.
Otinus Academy Learning Software (optional)
A continuously expanding e-learning platform developed for Otinus brand customers. Purchasing this device grants you one year of access to online courses, ideal for onboarding new operators or refreshing training knowledge!
On-site Commissioning and Operator Training (optional)
- Day 1 (up to 8 hours): Machine installation and training on the control system usage.
Professional Telephone Support (optional)
- By phone: 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour package to be used within 12 months.
- Online: 7:30 AM to 2:30 PM (Mon-Fri) – an 8-hour package to be used within 12 months.
Access to Otinus Academy Online Courses (optional)
- MyPlasm – 12-month access
- LibreCad – 12-month access
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil
Bydgoszcz
10.480 km
Tersedia dari stok: mesin pemotong plasma 3000x1500
OtinusPCO-3015-DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, CNC plasma/oxy-fuel cutting system PCO-3015-DG
Csdoh E Sgtspfx Aaroaa
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 1520 x 3100 mm
- Clearance between table surface and gantry: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (cutting speed depends on plasma source power and material thickness): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 3650 mm
- Width: 2280 mm
- Height: 1500 mm
- Total weight: 1,200.0 kg
- Maximum load capacity: 2,500.0 kg
- Adjustable support feet: 6
Systems
GCS - Gas Cutting System – integrated oxy-fuel cutting system enabling the cutting of sheets up to 150 mm thick.
THC - Torch Height Controller – integrated system that automatically adjusts the torch height to the material, based on analysis of source voltage fluctuations.
AMS - Align Material System – automatically corrects information on the material angle relative to the table.
Visit and Test Our Machines
Take part in an exclusive demonstration, where a qualified Otinus technician will showcase the full functionality of the machine. Additionally, you may test how the system meets your specific requirements. You are welcome to bring technical drawings and sample material.
Otinus Academy Learning Software (optional)
A continuously expanding e-learning platform created for Otinus customers. With purchase of this device, you gain one year of access to online courses, supporting effortless onboarding of new operators or refreshing knowledge acquired during training!
Commissioning and On-site Operator Training (optional)
- Day 1 (up to 8 hours) – machine installation and training in use of the control system.
Telephone Consultation with a Specialist (optional)
- By phone: 07:30 to 21:00 (Mon–Sat) – an 8-hour package to be used within 12 months.
- Online: 07:30 to 14:30 (Mon–Fri) – an 8-hour package to be used within 12 months.
Access to Otinus Academy Online Courses (optional)
- MyPlasm – 12-month access
- LibreCAD – 12-month access
iklan kecil
Bydgoszcz
10.480 km
TERSEDIA DI GUDANG Mesin pemotong plasma-autogen
OtinusPCO-2512-DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Many of our machines are available directly from stock. Call us to learn more!
The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website.
CNC Plasma-Oxyfuel Cutting System PCO-2512-DG
The machine was designed and built in Poland.
Technical Specifications
- X and Y working area: 1270 x 2600 mm
- Clearance between table surface and gantry: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on the power of the plasma source and the thickness of the material to be cut.): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Parameters
- Length: 3150 mm
- Width: 2030 mm
- Height: 1500 mm
Cjdpfx Aaerp A Ukorsaa
- Total weight: 1,050.0 kg
- Maximum load capacity: 1,750.0 kg
- Adjustable support feet: 6
Systems
GCS - Gas Cutting System – integrated oxyfuel cutting system enabling cutting of plates up to 150 mm thick.
THC - Torch Height Controller – integrated torch height control system that automatically adjusts the torch distance to the material, based on analysis of fluctuations in the source voltage.
AMS - Align Material System – automatically corrects information about the material angle relative to the table.
Come and test our machines
Participate in an exclusive demonstration, where a qualified Otinus technician will showcase the full functionality of the machine. Additionally, you can try out the machine to see how it suits your requirements. You are welcome to provide technical drawings and sample material.
Otinus Academy Learning Software (optional)
This is a constantly growing e-learning platform created for Otinus brand customers. When you purchase this machine, you will receive one year of access to online courses, making it easy to onboard new employees or refresh skills learned in training!
On-site machine commissioning and operator training at the customer’s location (optional)
- Day 1 (up to 8 hours) – Installation of the machine and training in using the control system.
Professional telephone support (optional)
- Phone: 7:30 to 21:00 (Mon–Sat) – an 8-hour package to be used within 12 months.
- Online: 7:30 to 14:30 (Mon–Fri) – an 8-hour package to be used within 12 months.
Access to online courses Otinus Academy (optional)
- MyPlasm – 12 months’ access
- LibreCad – 12 months’ access
iklan kecil
Bydgoszcz
10.480 km
Tersedia dari stok, mesin pemotong plasma 2000x1000
OtinusPCO-2010-DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, CNC plasma cutting system PCO-2010-DG
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 1,020 x 2,100 mm
- Clearance between table surface and gantry: 240 mm
- Maximum height of profile to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on plasma source output and material thickness): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Specifications:
- Length: 2,650 mm
- Width: 1,780 mm
- Height: 1,500 mm
- Total weight: 900.0 kg
Cajdothi Amepfx Aarsa
- Maximum load capacity: 1,120.0 kg
- Adjustable support feet: 10
Systems
THC – Torch Height Controller – integrated arc voltage torch height control system automatically adjusts the torch distance to the material based on source voltage fluctuations.
AMS – Align Material System – automatically corrects material angle information in relation to the table.
Come and test our machines
Participate in an exclusive demonstration with a qualified Otinus technician showcasing the full functionality of the machine. Additionally, you may evaluate how the equipment suits your specific requirements. You are welcome to provide technical drawings and material samples for testing.
Otinus Academy Learning Software (optional)
A continuously expanding e-learning platform created for Otinus customers. When purchasing this machine, you receive one year’s access to online courses enabling effortless onboarding of new employees or effective knowledge refreshment from prior trainings!
On-site commissioning and operator training at the customer’s location (optional)
- Day 1 (up to 8 hours) – installation of the machine and training in the use of the control system.
Telephone consultation by a specialist (optional)
- By phone: 7:30 to 21:00 (Mon–Sat) – 8-hour package valid within 12 months.
- Online: 7:30 to 14:30 (Mon–Fri) – 8-hour package valid within 12 months.
Access to Otinus Academy online courses (optional)
- MyPlasm – access for 12 months
- LibreCad – access for 12 months
iklan kecil
Bydgoszcz
10.480 km
DI GUDANG Pressa tekuk 200x3200 DA-58T
OtinusPBO-3220-CNC Delem DA-58T
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3220-CNC Delem DA-58T
Technical Specifications
- Nominal pressing force: 2000 kN
- Maximum bending length: 3200 mm
- Depth (distance between tool and back wall): 320 mm
- Maximum stroke of bending beam: 200 mm
- Maximum daylight opening: 480 mm
- Distance between columns: 2700 mm
- Max. backgauge travel: 600 mm
- Motor power: 15.0 kW
- Length: 3300 mm
- Width: 1800 mm
- Height: 2900 mm
- Weight: 10,500 kg
Equipment
- Front sheet supports: 2 pcs.
- Backgauge travel (X-axis): Servo drive
- Beam positioning (Y-axis): Servo drive
- Backgauge finger height adjustment (R-axis): Manual
- Punch clamping type: AMADA quick-change system
Delem DA-58T CNC Control
- Advanced operator assistance based on algorithms
- Enhanced graphical simulation of bending processes
- Operator guidance prompts
- Algorithms for optimized production cycle
- Automatic crowning
Manual Crowning (optional*)
This feature ensures that the bent sheet maintains a consistent bending angle over the entire length.
Automatic Crowning (optional*)
Enables the control system to monitor and automatically adjust crowning, ensuring that settings are always optimal.
Casdpfoipxzpex Aarsa
OCS
The oil cooling system guarantees stable machine parameters, even during long continuous use.
Professional Support
We maintain continuous contact with our customers. With each machine purchase, we offer a support hours package provided by certified Otinus technicians.
Come and Test Our Machines
Join our exclusive demonstration with a qualified Otinus technician to showcase the full machine functionality. You are welcome to provide your technical drawings and sample materials.
Machine Delivery Includes:
Two-day operator training and commissioning
- Day 1 (up to 8 hours): Commissioning and CNC control training
- Day 2 (up to 8 hours): Independent machine use under supervision – possibility to program individual parts
Telephone support from a specialist
- From 7:30 AM to 9:00 PM (Mon–Sat) – 8-hour package to be used within 12 months
Free rental of transport rollers and two jacks to facilitate on-site machine installation. Rollers and jacks provided upon prior request (minimum 7 days before machine delivery).
Terms of Cooperation
- 24-month warranty period
- Delivery time: approx. 6–8 weeks (unless marked as ex-stock)
- Machine is brand new
- Seller’s warranty and post-warranty support
- Customer bears responsibility for the machine during unloading and transport on their premises.
Kami memudahkan pencarian untuk Anda: "stock"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Stock (12.951)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan


















































































































































































