Beli Tabel Pengeboran Mesin bekas (78.744)

Kondisi: baru, Column Drilling Machine Bernardo GB 35 HSV with Coolant System Maximum drilling capacity: 32 mm Drill chuck: 1 – 16 mm / B 16 Morse taper: MT 4 Spindle speed (12): 75 – 3200 rpm Feed range: 0.10 / 0.18 / 0.26 mm/rev Throat depth: 295 mm Max. spindle-to-table distance: 775 mm Spindle-to-base distance: 1185 mm Quill stroke: 125 mm Fpsdpfxod Hbwio Adgeb Column diameter: 115 mm Table size: 500 x 455 mm T-slot size: 14 mm Base working surface: 375 x 365 mm Motor output (S1 100%): 1.1 / 1.5 kW (400 V) Motor input (S6 40%): 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 630 x 700 x 2050 mm Weight: approx. 340 kg Scope of delivery: - Keyless drill chuck 1 – 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Coolant system - Reducing sleeve MT 4 / 3 - Height-adjustable safety guard - Digital drilling depth display - Thread cutting device - LED machine lamp - Operating tools

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Fpsdpfx Aeq Ii Dlsdgjb Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 5801, de-plate-drilling-fdb600 Fpjdpsibq Itjfx Adgsb

Kondisi: baru, Drilling capacity in steel (diameter): 25 mm Throat depth: 170 mm Drill stroke: 50 mm Slot milling cutter capacity: 16 mm Spindle mount: MT 3 Spindle speeds: 50 - 3000 rpm Table cross travel: 280 mm Fedpfevdldwjx Adgepb Table longitudinal travel: 155 mm Clamping surface of table: 500 x 180 mm Supply voltage: 230 V Max. distance between work table and spindle nose: max. 320 mm Total power requirement: 0.8 kW Machine weight approx.: 150 kg Required space approx.: 670 x 550 x 910 mm Drilling and milling machines: Digital depth and speed display, 2 gearbox stages With fine adjustment and variable speed, Includes left/right switch Head swivels to the left and right Supplied with corresponding tools

Kondisi: hampir baru (bekas), Tahun pembuatan: 1990, Drilling capacity in steel: 50mm Fpodpjg I I Eksfx Adgob Drilling capacity in cast iron: 63mm Spindle: MT4 Spindle speeds: (12) 45-2000 RPM Drill head travel: 350-1250mm Distance spindle to base plate: 350-1420mm

Tahun pembuatan: 1998, Kondisi: baik (bekas), I am selling a dowel boring machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Fpedpfxed Exwgo Adgsb Number of insertion heads: 1 Programming CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available immediately

Kondisi: baru, Bernardo Gear-driven Drill Press GB 28 S Fedpfxsd Du T Aj Adgopb Technical Specifications - Maximum drilling capacity: 28 mm - Maximum tapping capacity: M12 - Drill chuck: 1 - 13 mm / B 16 - Morse taper: MK 3 - Spindle speed (12 steps): 75 – 3200 rpm - Throat depth: 250 mm - Max. distance spindle / table: 810 mm - Distance spindle / base plate: 1210 mm - Quill stroke: 130 mm - Column diameter: 100 mm - Table working area: 325 x 330 mm - Table size / T-slot size: 375 x 375 mm / 14 mm - Motor rated output S1 100%: 0.85 / 1.1 kW (400 V) - Motor input power S6 40%: 1.1 / 1.5 kW (400 V) - Machine dimensions (W x D x H): 450 x 600 x 2020 mm - Weight approx.: 215 kg Scope of delivery • Hardened geared drill chuck 1 – 13 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2 • Automatic tool ejector • Tapping device • Forward/reverse drive function • Height-adjustable safety guard • LED machine work light

Tahun pembuatan: 1991, Kondisi: bekas, nomor mesin/kendaraan: 9198590, Technical Data: - Drilling capacity: 60 mm - Arm reach: 1600 mm - Spindle taper: MT 5 - Spindle stroke: 390 mm Fpjdpfx Aedhkhtodgeb - Spindle speeds, 20 steps: 20 - 2000 rpm - Clockwise/anticlockwise rotation - Feed, 12 steps: 0.056 - 2.5 mm/rev - Drive: 400 V / 12.8 kW - Electromechanical clamping of arm and drilling unit - Distance (machined machine bed – spindle quill): - min. approx. 900 mm - max. approx. 1600 mm - Usable machine bed with 4 T-slots: 950 x 1700 mm - Coolant system - Box table - Space requirements: approx. W 2600 x H 3000 x D 1000 mm - Weight: approx. 4500 kg

Kondisi: baru, Tahun pembuatan: 2025, Neue halbautomatische Fräs- und Bohrmaschine MLA MP 34 zur Fräsung und Dreifachbohrung für die Griffmontage in PVC-Türen und -Fenstern Installierte Optionen: - Zentriervorrichtung Fpodewh Twxspfx Adgeb - Rechts- und linksseitige Auflagen, Länge = 2 m Auf Lager

Kondisi: baru, Drilling capacity in steel (diameter): 16 mm Throat depth: 170 mm Drilling stroke: 50 mm Slot milling cutter capacity: 16 mm Spindle taper: MT2 Fpodpfx Adeupxmrsgjb Spindle speeds: 50 – 2250 rpm Table cross travel: 320 mm Table longitudinal travel: 145 mm Table clamping surface: 500 x 140 mm Supply voltage: 230 V Total power requirement: 0.5 kW Machine weight approx.: 90 kg Required space approx.: 0.5 x 0.45 x 0.84 m Drilling and milling machine featuring: - Variable spindle speed - Digital depth gauge - Forward / reverse switch - Cross slide - Swivelling spindle head - Manual feed via handwheel - Tool case with content Note: Supplied without digital readout! Surcharge for 3-axis digital readout: EUR 499

Tahun pembuatan: 1973, Kondisi: bekas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 Spindle speeds - stepless: 70 - 2000 rpm Fpjdpfjgmu A Sex Adgjb Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drill radius max./min.: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pieces T-slot spacing: 18 mm Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirement approx.: – Support travel: 590 mm Without rotary table, without tools

Tahun pembuatan: 1963, Kondisi: bekas, Radial drilling machine, drill press, cantilever drilling machine, universal drilling machine, milling machine - Arm reach: 645 mm - Taper: MT3 - Spindle speeds: 95 - 1050 rpm - Column diameter: Ø 190 mm - Spindle stroke: 195 mm - Automatic feed: 0.05/0.10/0.20 mm/rev Fsdsdvnbxjpfx Adgspb - Clamping table: 735 x 520 mm - Dimensions: 1350/705/H2170 mm - Weight: 1100 kg

Kondisi: bekas, Tahun pembuatan: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirements approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Fpedpfot Hxa Hjx Adgjb Y-axis (transverse): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle – table top: 140 / 690 mm Vertical travel of drill head, motorized: 540 mm Spindle overhang approx.: 450 mm Spindle taper: SF 32 Drilling capacity in steel: 30 mm Spindle stroke (quill), vertical max.: 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feed rates, 6 automatic steps: 0.03/0.07 to 0.4 mm/rev Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total connected load: approx. 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / Special equipment: • HEIDENHAIN CNC 2-axis contouring control Type TNC 150 with color monitor, graphics, all standard subroutines and cycles, tapping cycles, hand-held controller or electronic handwheel, RS-232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC. • Drilling depth can be preset via a 12-position turret stop with digital display on the monitor. • The drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • With quick-change tool system and various tool holders, various drill chucks, coolant device, etc. Condition: good to very good - demonstration under power possible Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel: 28 mm - Thread cutting device - Drill spindle mount: MT 3 - Drill spindle stroke: 160 mm - Table dimensions approx. 750 x 500 mm - Arm reach up to approx. 620 mm - Vertical travel of the arm: 600 mm - Column diameter: 250 mm - Spindle speeds in 12 steps: 80 – 2800 rpm - 3 feeds: 0.1 / 0.15 / 0.25 mm/rev - Drill spindle drive: 400 V / 5.5 kW - Coolant system - Space requirement: approx. W 1100 x H 1550–2150 x D 950 mm - Weight approx. 1200 kg Fpsdeb Ennkjpfx Adgob - Operating manual

Kondisi: baru, Drilling capacity in steel (diameter): 16 mm Throat depth: 180 mm Drilling stroke: 85 mm Spindle taper: MT 2 Spindle diameter: 47 mm Spindle speeds: 320 - 3300 rpm Table traverse (cross): 230 mm Table traverse (longitudinal): 100 mm Fpjdpeupxcyjfx Adgeb Clamping area of table: 420 x 155 mm Connection voltage: 230 V Maximum packing size: 900 x 600 x 300 cm Total power requirement: 0.75 kW Machine weight approx. 80 kg Dimensions (L x W x H): 0.7 x 0.7 x 0.8 m Drilling and milling machine with: - Cross support - Feed via handwheel - Chip guard - 16 mm drill chuck - Mechanical MT tool clamping

Kondisi: bekas, Drilling automation system, drilling machine, panel drilling machine, multi-spindle drilling machine - Drilling automation system: suitable for advertising signs - Spindle mount: 12 mm (can be modified to customer requirements) - Automatic drilling feed - Table size: 1200 x 1000 mm - Spindle stroke: 200 mm Fodeddfhxspfx Adgspb - Speed: 2800 rpm - Feed: via gearbox - Pneumatic workpiece clamping - Pneumatic workpiece ejection - Dimensions: 1360/1520/H2180 mm - Weight: 450 kg

Kondisi: baru, Drilling capacity in steel (diameter): 25 mm Throat depth: 175 mm Quill travel: 50 mm Slot milling capacity: 16 mm Spindle taper: MT 3 Spindle speed: 50 – 3000 rpm Table travel (transverse): 380 mm Fpodpfx Adeupxtfegob Table travel (longitudinal): 175 mm Clamping surface of table: 700 x 180 mm Power supply: 230 V Max. distance between spindle nose and worktable: max. 320 mm Total power consumption: 0.75 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drilling and milling machine with large table SINO 3-axis digital readout Quill travel digital readout 2 speed ranges Forward/reverse switch Head swivels 90° left/right Spindle guard Including toolbox with various tools

Kondisi: bekas, Pillar drilling machine, column drilling machine, upright drilling machine, multi-spindle head, multi-spindle drilling head, drilling gearbox - with twin-spindle drilling head by Sigloch Schrieder, type: V602 - Drive power: 1.02/0.88 kW - Adjustable drill spacing: 18-110 mm - Max. drill diameter: 2x Ø 6 mm Fpjdjc Rpnnopfx Adgeb - Table size: 275 mm - Spindle taper: MK3 - Throat depth: 220 mm - Speed range: 100-2900 rpm - Columns: Ø 100 mm - Spindle stroke: 75 mm - Gearbox - Dimensions: 900/400/H1910 mm - Weight: 230 kg

Kondisi: baru, Drilling capacity in steel (diameter): 30 mm Throat: 200 mm Drilling stroke: 70 mm Slotting cutter capacity: 16 mm Spindle taper: MT3 Spindle speeds: 50 - 3000 rpm Cross table travel: 565 mm Longitudinal table travel: 220 mm Clamping surface of table: 840 x 210 mm Connection voltage: 400 V Max. distance between worktable and spindle nose: max. 470 mm Fjdpsupxt Eefx Adgopb Total power requirement: 1.1 kW Machine weight: approx. 230 kg Required space: approx. 0.75 x 1.05 x 1.3 m Drilling and milling machine with large table SINO 3-axis digital display Digital quill travel display 2 speed ranges Left/right switch Head tilts left/right 90° Taper MT 3 - B16 Drill chuck 3 - 16 mm Spindle guard Machine base optional (199 EUR) Includes toolbox with various tools

Kondisi: baru, Drilling capacity in steel (diameter): 35 mm Throat depth: 230 mm Drilling stroke: 125 mm Spindle taper: ISO 40 Spindle speeds: 115 – 1750 rpm Cross table travel: 560 mm Fjdeu Imkdopfx Adgepb Longitudinal table travel: 175 mm Table clamping surface: 1000 x 240 mm Max. distance between worktable and spindle nose: 375 mm Supply voltage: 400 V Total power requirement: 0.85/1.5 kW Machine weight approx.: 0.95 t Required space approx.: 1.3 x 1.2 x 2.1 m Equipment/features: - 3-axis digital readout - Digital depth display - Motorized feed for X and Y axes - Left/right rotation - Emergency stop - Swivelling drill head - Spindle guard - Machine lamp - Tool box with contents

Kondisi: bekas, Tahun pembuatan: 1985, Perjalanan x 400 mm Perjalanan y 180 mm Perjalanan z 300 mm Ukuran meja 760 x 200 mm Dudukan spindel ISO MK 3 Kecepatan spindel 40 - 1800 rpm Langkah pahat 80 mm Kebutuhan daya total 1,2 kW Berat mesin sekitar 0,38 t Dimensi P x L x T 1,75 x 1,65 x 1,9 m Fpedpfx Asw Tdwredgob Mesin bor dan frais - Sumbu X tanpa spindel - Pelumasan terpusat

Kondisi: baru, Drilling capacity in steel (diameter): 16 mm Throat depth: 185 mm Drilling stroke: 50 mm Capacity, slotting cutter (end mill): 20 mm Spindle taper: MT 2 Spindle diameter: mm Spindle speeds: 100–1500 / 200–3000 rpm Table travel, crosswise: 175 mm Fsdpfx Ajurznwedgopb Table travel, longitudinal: 280 mm Table clamping surface: 500 x 180 mm Connection voltage: 230 V Total power requirement: 0.85 kW Machine weight approx.: 0.12 t Space requirements approx.: 0.86 x 0.6 x 0.9 m Drilling and milling machine with: - variable spindle speed - cross slide - 90° swiveling spindle head left/right - feed via handwheel

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table cross travel: 190 mm Table longitudinal travel: 490 mm Clamping surface of table: 730 x 210 mm Supply voltage: 400 V Feed rates: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Required space approx.: 0.8 x 0.75 x 1.85 m Drill/milling machine equipped with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Change-gear transmission Fsdeupw T Dopfx Adgjpb

Kondisi: baru, Drilling capacity in steel (diameter): 45 mm Fjdpfeupxrnsx Adgjpb Quill travel: 125 mm Table traverse (cross): 560 mm Table traverse (longitudinal): 230 mm Table clamping surface: 800 x 240 mm Spindle speeds: 75 - 3200 rpm Max. milling cutter diameter: 80 mm Spindle taper: ISO 30 Max. distance between table and spindle nose: 460 mm Throat: 230 mm Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight: approx. 580 kg Space requirement: approx. 1.2 x 1.0 x 2.1 m Equipment: All axes with 3-axis digital readout. Quill travel with separate digital display. Automatic feed on X-axis and quill. Motorized Z-axis. Tapping unit. Coolant system. Machine base. Collet set, SK tool holder. Additional machine accessories in box.

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 – 3,200 rpm Table traverse (cross): 190 mm Table traverse (longitudinal): 490 mm Clamping surface table: 700 x 210 mm Supply voltage: 400 V Max. milling cutter diameter: 80 mm Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine equipped with: • Tapping device • Compound table with adjustable guides • Quill feed Fodpfoupw Uzex Adgopb • Gearbox • SK 40 spindle taper