Beli Tempern Oven Plastik bekas (7.454)

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Oven for Plastics Processing This oven is suitable for processing thermoplastics. Manufacturer: Reinhardt Model: VL Year of manufacture: 1991 Serial no.: 8182 Connected load: 50.2 kW Voltage: 380 Volt Operating temperature: 50 - 200 °C Trolley dimensions approx.: 2000 x 1200 mm (W x D), 500 mm opening Felhswp Em Ujcdw Hepr

Kondisi: baik (bekas), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina výroby: Západné Nemecko (Kelberg / Eifel) Typ: jednozávitovkový plastový extrudér Dokumentácia: Súčasťou dodávky (pôvodný nemecký manuál a korešpondencia z roku 1987) Stav: Použitý, ale kompletný a funkčný Miesto uloženia: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer závitovky: 30 mm L/D pomer: 25 D Fjlhcdoxu E E Sow Hspr Hlavný motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot/min) Napájanie: 3 × 380–420 V / 50 Hz Riadiace napätie: 220 V Chladenie: Vzduchom chladený valec s vykurovacími zónami Riadiaca skriňa: Súčasťou dodávky, vrátane relé, ističov a analógových meradiel Popis: Kompaktný, jednozávitovkový laboratórny alebo malosériový extrudér od spoločnosti Plastik-Maschinenbau GmbH vyrobený v Západnom Nemecku. Určený na spracovanie termoplastických materiálov, testovanie materiálov alebo pre menšie extrúzne linky (napr. výroba hadičiek, profilov alebo na poťahovanie). Obsahuje originálny elektrický rozvádzač, manometer a kompletnú dokumentáciu. Po mechanickej aj elektrickej stránke je kompletný, vyžaduje už len štandardné uvedenie do prevádzky.

Kondisi: baik (bekas), Haussler Steinbackofen Modell – INO 2000/4 230 Volt Anschluss Schwere Schamott-Steinbackkammer Folhevz Dv Tscdw Hjpr Temperaturbereich: 50–320 °C Exzellentes Design Hergestellt in Deutschland In hervorragendem Zustand

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 2 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LM 500 W6-P, Dijual mesin wrapping Plasmek Plastic Makinalari LM500 W6-P karena tidak terpakai. Mesin ini praktis memiliki nol jam operasional dan belum pernah digunakan. Semua suku cadang dan aksesori tersedia. Folhew H Rpvocdw Hopr

Kondisi: sangat baik (bekas), Miwe Condo 60x80 vloeroven met steenbodem en narijskast. Voor meer informatie kunt u een e-mail sturen. Fpeljkzhqmohcdw Her

Tahun pembuatan: 2002, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum temperature: 700°C Opening (WxH): 1,500 x 30 mm Fpelhcowi Ry Hodw Hjr Country of origin: Netherlands Electrical power: 14 kW Machine dimensions (LxWxH): 2,000 x 1,000 x 1,700 mm Machine weight: 1,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 450 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 21.1605, 21.1702, 21.1600, 21.1682, jenis arus masuk: tiga fasa, Komplette Anlage für das Waschen, Trocknen sowie Entstauben und Entfernen von Flusen aus starren Kunststoffen, mit einer Leistung von 1,5–2 Tonnen/Stunde: - Sink-Schwimm-Wassertank - Horizontale Friktionswaschmaschine - Mechanischer Reiniger und Trockner - Zickzack-Klassierer und Big-Bag-Abfüllsystem - Elektrische Schalttafel für das gesamte System Die mit Wasser in Kontakt kommenden Teile bestehen aus Edelstahl oder gehärtetem Stahl. Fpolhswpm U Tjcdw Her Die Maschinen (Sink-Schwimm-Wassertank und Horizontale Friktionswaschmaschine) sind mit Laufstegen und Podesten für Inspektionszwecke ausgestattet und ermöglichen eine Installation auf beiden Seiten; zudem können die einzelnen Maschinen gegeneinander verdreht werden, sodass die Linie als I-, L- oder U-Form aufgebaut werden kann. Die Linie ist voll funktionsfähig, wurde kaum genutzt und wurde ursprünglich für ein Projekt angeschafft, das nicht umgesetzt wurde.

Kondisi: sangat baik (bekas), J4 Tunnelofen aus dem Jahr 2012, demontiert und versandbereit. Für weitere Informationen senden Sie bitte eine E-Mail. Fpslhew Elytjcdw Hor

Kondisi: hampir baru (bekas), Mondial Forni Stonefloor oven 120x150, bouwjaar 2016, slechts enkele keren gebruikt Fpslswf Ix Sshcdw Hsr

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 1213255, de-DE Fslhcdwsxb Alvs Hjpr

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Produktübersicht der Industrie-Abfallholz-Paletten-Doppelwellenzerkleinerer Zerkleinerer werden im Allgemeinen zum Zerkleinern von schwer zerstörbaren Kunststoffen, Gummi, großen Reifen, großformatigen Nylonmaterialien, Fischernetzen, Fasern, Papier, Holz, Elektrogeräten, Kabeln, PET-Flaschen, Karton, Holz, Kunststofffässern usw. verwendet – also von festen Materialien. Die Hauptfunktion der Anlage besteht darin, sperrige Materialien und großvolumige Trommel-Metallmaterialien, die schwer zu transportieren sind, mittels Scherwirkung des Zerkleinerers zu verarbeiten und auf die geforderte Form und Stückgröße zu zerkleinern. Der Hauptaufbau des Doppelwellenzerkleinerers umfasst einen Einfülltrichter, Walzen mit Messern, einen Antrieb, Lager, ein Hydrauliksystem und einen Schaltschrank. Funktionsweise: Unterschiedlichste Abfallarten gelangen über den Einfülltrichter in die Zerkleinerungskammer. Die zwei Schneidwalzen drehen sich gegenläufig, zerschneiden und zerreißen das Material, das anschließend aus dem Zerkleinerer ausgetragen wird. So wird eine effektive Zerkleinerung auch von großformatigem Material erzielt. Einsatzbereiche und Materialien Der Doppelwellenzerkleinerer ist eine essentielle Maschine für die Abfallverwertung in folgenden Bereichen und für folgende Stoffe: + Sperrmüll: Sofa, Matratze, Stuhl, Möbel, Fenster usw. + Industrieabfälle: Textil, Leder, Gummi, allgemeine Industrieabfälle usw. + Gefährliche Abfälle: Medizinische Abfälle, Farbschlämme, radioaktive Abfälle, Altöltonnen, Big Bags usw. + Papierabfälle: Karton, Wellpappe, Bücher, Zeitungen, Akten, Broschüren, Verpackungspapier usw. + Gartenabfälle: Äste, Holzpaletten, Stämme, Bretter usw. + Haushaltsabfälle & Biomasse: Stroh, Bambus, Maisstroh, Sorghumstroh, Bohnenstroh, Nussschalen, Kokosnussschale usw. + Metallschrott: Karosserien, Aluminiumguss, Haushaltsgroßgeräte, Leichtmetallschrott, Felgen usw. + Papierfabrikabfälle: Siebreststoffe, Drahttrossen, Randabschläge der Papierproduktion usw. Fpslhjvn D I Njcdw Hor + Holzpaletten, Altmöbel, ausgediente Stühle, Baumwurzeln usw. Hauptgehäuse des Doppelwellenzerkleinerers: Das Maschinengehäuse ist aus hochwertigem Stahlblech geschweißt und garantiert damit dauerhafte Standfestigkeit auch unter hohen Belastungen. Lager: Die Lagergehäuse sind geteilt und dadurch einfach zu demontieren – bewegliche Messer, Festmesser, Lager und andere Komponenten lassen sich schnell ausbauen und warten. Die Dichtstruktur verhindert das Eindringen von zerkleinertem Material und Schmierstoffen und schützt beim Zerkleinern von Flüssigkeiten zusätzlich Lager und Getriebe.

Tahun pembuatan: 2013, Kondisi: baru, Wood-fired oven with direct firing Baking surface: 1.0 x 0.7 x 0.25 m (L x W x H) 8 cm fireclay lining with integrated ash drop chute Baking chamber door folds downwards Fpsloygm Uehcdw Hsr Available with fully automatic pellet firing upon request

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg Fpjlhcdjvz Hq Tew Her - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 211 h, de423c51-4f42-413a-bb58-284fe2f7a329 Fpelhjx D Ehrecdw Hjr

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 49 kW Working output: 45 kW Brand new in original packaging: Yes Warm air blower, flue gas fan, electronic control with digital display: included Intake air filter, recirculation intake filter: large-surface intake filter with no loss of performance / included Warm air ducting pipes: 2 x 200 mm with plug-in, freely rotatable 90° bends Flue outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Fpelhcdwepn Nyzj Her Air delivery: 3500 m³/h Intake air filter: Yes, large-surface intake filter with no loss of performance Power consumption: 550 W Designed for room volume: 1000 m³ Weight: 310 kg

Kondisi: Pembawa suku cadang rusak (bekas), Fungsionalitas: fungsi terbatas, dtf-offer-2024 Fpelhcdjx Ehggew Hsr

Kondisi: siap digunakan (bekas), kapasitas angkut: 600 kg, Hindenlang TPESM-600 - Oven Induksi Fpelhcdwjx Enflj Hor Suhu maksimum: 850° Tegangan: 400 V

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet Fpolhcjvz Hq Hsdw Hsr The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: siap digunakan (bekas), kapasitas angkut: 600 kg, daya nominal: 69 kW (93,81 hp), Hindenlang TPESM-600 - Oven Induksi Suhu maksimum: 850° Tegangan: 400 V Fpolhcdwex Enffj Her

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 Folhcovz Hqyjdw Hjpr - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: siap digunakan (bekas), Ekstruder Andouart Fslex Engpohcdw Hopr

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h Felhsvz Hqtocdw Hopr - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V Folhcdwevz Hqmj Hjpr - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ Fpelhcdwovz Hqgj Her - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 Folhcdjvz Hhxsw Hopr The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.