Beli Tepi Gigi bekas (3.076)

Kondisi: bekas, Holz-Her Accura 1556 Premium Heavy-duty design with full equipment Edge thickness: 0.4 - 20 mm Nsdpfx Aoxy Nxyebmoli 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized adjustable infeed fence Pre-milling unit for edging before the gluing station with 2 NC servo axes Edge magazine Syncro, fully automatic for coil and strip material MOT3, with 2 motorized pressure rollers Glue application station GLU-JET automatic. Cartridge + PUR bonding. Thin film technology Adhesive height adjustment / contact nozzle Maximum edge height: 60 mm Pressure section with 4 rollers, motor-pneumatic. NC servo axis End trimming unit for coil and strip material up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0-10° angle Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multi-function milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC-controlled axes, for milling upper and lower longitudinal edges and copying the front and rear vertical end edges. Working height 60 mm. R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1,3; R2 (2x); bevel 45° Nesting package Flat scraper unit with pre- and post-sensing Operation-controlled, oscillating buffing unit for post-cleaning and edge polishing with 2 textile disks Spraying device at infeed and outfeed areas, as well as antistatic agent at the pressure section Infeed area: electronically controlled separating agent spraying device Pressure section: electronically controlled antistatic spraying device Outfeed area: electronically controlled cleaning agent spraying device incl. cleaning fluid Automatic chain lubrication Barcode scanner Machine is FACTORY SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing available Machine connected and ready for demonstration in showroom Available ex-stock Lieboch

Kondisi: baik (bekas), motor gearbox yang dapat diatur, motor gearbox variabel, elektromotor -Daya motor: 0,37 kW Nljdpfec Nlypjx Abmji -Rentang kecepatan putar: 190-1000 rpm -Motor: dapat diatur -Diameter poros: Ø 19 mm -Tipe konstruksi: B5 -Jumlah: 1 unit motor tersedia -Harga: per unit -Dimensi: 350/180/H200 mm -Berat: 14 kg

Kondisi: baru, Mesin bekas Tahun pembuatan: 1988 Kondisi: terawat Data teknis: - Panjang meja kerja: 1440 mm - Lebar total dua meja kerja: 710 mm - Penyesuaian kemiringan meja kerja: 0 – 30 derajat - Tekanan kerja: 6 bar - Panjang sabuk amplas: 2170 mm - Lebar sabuk amplas: 150 mm Njdpfsxzl Aqox Abmeli - Kecepatan sabuk amplas: 10 – 20 m/detik - Penyesuaian vertikal unit osilasi: 125 mm - Berat: 490 kg - Konsumsi udara: 25 NL/menit - Listrik: 400 V / 2,9 kW Ketersediaan: segera Lokasi penyimpanan: Baden-Württemberg

Kondisi: bekas, Tahun pembuatan: 1986, Diameter roda - maks. 150 mm Nljdpfx Aexzuzisbmoi Modul - maks. 5 Modul - min. 0,5 Berat mesin sekitar 10.000 kg Kebutuhan ruang sekitar 6500 × 2700 × 3600 mm

Kondisi: bekas, Condition: Used - Compatible Machine: EDGE BANDER - If interested, we offer an overhaul service; please contact us. Nljdpsvazxcsfx Abmoi

Kondisi: bekas, Tahun pembuatan: 2016, Industrial Automatic Edgebanding Machine SOLUTION XD MAIN FEATURES “E TOUCH” CONTROL WITH AUTOMATIC PROGRAMMING: ONE “TOUCH” IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimum panel guidance Edgebanding of coil material, strip edges, and solid wood edges GENERAL FEATURES Single-sided edgebander in left-hand configuration for edgebanding coils and strips using all common hot-melt adhesives. The base frame consists of a robust welded steel frame with increased rigidity, providing optimal support for housing the processing units. The top pressure is made of thick-walled steel profile with a double trapezoidal drive belt, which is positioned automatically according to the panel thickness. Height adjustment is displayed both on the top pressure and on the operator’s console. Manual workpiece feed system with generously sized working line and enlarged support surface for easy introduction of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling unit. Nsdpfxjxy Tm Ij Abmjli Machining units mounted on the pressure beam and mechanically linked to guarantee automatic adjustment when changing panel thickness. Lower processing units are fixed to the machine base or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency converters (inverters); each unit has its own inverter for optimal flexibility and improved production times. Protective hood for all units located after the gluing station, with polycarbonate windows providing a clear view of the processing units during operation. Interior lighting of the hood, equipped with sound-absorbing material to reduce noise emissions during operation. Spacer at the infeed fence allows correct panel loading. The spacing is automatically adjusted according to the selected feed speed. Swiveling control panel positioned at the infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations. Electrical components are housed in a metal cabinet mounted to the machine frame with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide plates made of rubberized nylon, for optimal guidance and high durability. The chain runs on two guides made of hardened and ground steel—one round, one flat—to ensure straight panel feed and to prevent lateral deviation. Automatic lubrication of the chain, with lubricant amount controlled by the system according to panels processed. External roller conveyor running the entire length of the machine, with an extendable opening system (up to 650 mm) for panels with maximum width of 1200 mm. E-TOUCH PC control system for quick and easy handling of main functions including: – Processing programs in Just-in-Time mode – Option to manage via parts lists – Option for management through ...

Kondisi: bekas, 1 Nledpjxy Iw Uefx Abmei

Kondisi: baik (bekas), Servomotor, Elektromotor, Gleichstrommotor, Servo-Getriebemotor -Hersteller: Dunkermotoren, Servo-Getriebemotor -Typ: BG 44X25SI Nljdpfx Aop Hiywebmji -Spannung: 24 V -Drehzahl: 2860 U/min -Getriebe: PLG 52 i = 8:1 -Welle: Ø 12 x 22 mm -Anzahl: 8x Getriebemotor vorhanden -Preis: pro Stück -Abmessungen: 172/58/H52 mm -Gewicht: 1,1 kg/St.

Kondisi: bekas, Tahun pembuatan: 2017, gebrauchtmaschine2017 Nlodpfx Aew Sbblobmsi

Kondisi: sangat baik (bekas), Gear motor Flender MBH 125CC-B 27.7/1 Nljdpsk E Htcofx Abmoi Bevel helical gear motor 11 kW at 1400 rpm. 230/400 V, 50 Hz, IP 55 Operated with frequency inverters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 gear motors and 12 frequency inverters available!!! Very good condition, directly from production!!!

Kondisi: baru, Die KF 200 von KNUTH ist eine leistungsstarke Kantenfräsmaschine, die speziell für die Blechbearbeitung entwickelt wurde. Diese robuste Maschine ermöglicht es Ihnen, gerade Kanten an großen Werkstücken schnell und effizient zu bearbeiten, einschließlich Entgraten, Fasen und der Vorbereitung von Schweißfugen. Mit einer Drehzahl von 3.500 1/min und der Fähigkeit, Fasenhöhen von 0 bis 5 mm zu bearbeiten, eignet sie sich sowohl für Stahl als auch für Aluminium. Dank der langlebigen Wolframlegierung der Schneiden müssen Sie nicht oft wechseln, was die Wartung vereinfacht. Im Lieferumfang sind einen Satz Schneidplatten sowie eine Bedienungsanleitung enthalten, sodass Sie gleich loslegen können. Wenn Sie nach einer zuverlässigen Kantenfräsmaschine suchen, um große Blechtafeln oder lange Profile zu bearbeiten, bestellen Sie jetzt die KF 200 und profitieren Sie von der Qualität und Präzision von KNUTH. Nljdpfx Aoq Ny R Sjbmji

Kondisi: baik (bekas), Maximum wheel diameter: 1600 mm Wheel width: 250 mm Module – max.: 30 Module – min.: 8 Tooth height: 58 mm Tooth width: 250 mm Machine weight approx.: 42.3 t Required space approx.: 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° Minimum: 150 Maximum: 800 - Pitch cone angle, in degrees Minimum: 5 Maximum: 85 - Tooth angle Minimum: 0° Nledpfx Aju Dbucebmoi Maximum: 45° - Number of teeth to be cut Minimum: 10 Maximum: 150 The machine is complete, fully functional, and in good condition. Equipment / Accessories: - Complete set of change gears - 4 pcs. cutter heads - Various milling cutters - Operating manual in English

Kondisi: bekas, Tahun pembuatan: 2018, Edge banding machine AKV 3006 DK - F with jointing cutter unit, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: - Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm - Max. workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable cutter (combination design) and fine cutter adjustment from the operator side - Spaces available for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view window from both rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg, depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment, 1 pc. Toggle between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is done manually via the stop flap in the machine. Buffing station (polishing mop): 1 pc Corner rounding cutter: 1 pc, including combination tool and pneumatic setting for chamfer/radius. Maximum workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper: 1 pc, including pneumatic lift device, radius R 2.0 mm. Flat scraper: 1 pc, with pneumatic control. Glue pot quick-change system, including second glue pot and downward glue outlet, 1 pc for quick color change. Grooving saw unit, horizontal into the edge, 1 pc, including pneumatic lift device and grooving tool. Separate extraction for jointing unit, 1 pc, directly at the jointing unit, vertically upward, d=80 mm for optimal extraction; strongly recommended from model AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ball bearing for corner rounding cutter 24.2 mm, 1 pc Interchangeable motor 0.37 kW for corner rounding cutter, 1 pc, with quick-change device incl. radius cutter R 1. Nledpoxfh Tmefx Abmei Interchangeable spindles, 1 set = 2 pcs, 1 set Quick change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim.

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Gear Measuring Machine (New/Demonstration Model) Four-axis gear measuring machine for gearings, suitable for workpieces with diameters up to 400 mm. All axes equipped with air bearings for maximum precision. X, Y, and Z axes made of granite for uniform thermal behavior. Granite base frame with high stability and integrated passive vibration damping system. No separate foundations required. The measurement accuracy of gears complies with VDI/VDE 2612/2613, Group I. Standard scope of supply: - Base machine with rotary table Ø 300 mm, counter support (tailstock) - Renishaw SP600 probe - CNC control unit consisting of industrial PC and accessories - Swiveling housing for keyboard, monitor, and mouse - Control panel with 2 joysticks, emergency stop button, override potentiometer - Basic set of probe accessories - Calibration sphere Ø 25 mm with certificate - Software for remote maintenance via Internet - Operating manual, technical documentation - Color: Light grey RAL 9002 and Grey B – RAL 7043 TGear Software: - Software for measuring gears with external and internal toothing, both straight and helical (PTB-certified) Nsdpfx Abjxy Iv Rsmjli - Profile and flank inspection - Pitch and runout inspection - Measurement of crowned gears - Inspection of profile and flank modifications using K-diagram - Numerical measurement of tip and root reliefs - Calculation of Wildhaber dimension, tooth thickness, measurement over 2 balls or 1 ball, measurement over rollers - Inspection of all teeth - Topographical display of tooth flank geometry based on profile and flank measurement - Output of measurement reports in PDF format Additional content: - TStylus – software for probe management - TCali – software for probe calibration - TAlign – calculation of axis positions and compensation up to 2 mm - Inspection according to standards (Q-DIN 3961/62), (Q-AGMA 2000), (Q-AGMA 2015)

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with a new glue application system - Infeed guide manually adjustable - Milling unit 1961 - Edge feeding unit 1903 - Glue application station 1906 with sensing nozzle - Pneumatic pressure unit 1816 - End trimming unit 1822 - Milling unit 1942 M for radius, chamfer, flush cutting - Complete air blast nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Full safety cover set - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edging thickness depending on configuration: 0.4–5 mm - Max. edge height: 55 mm - Min. edge band length (strips): 350 mm - Max. edge overhang/height per side: 3 mm - Min. workpiece width: 60 mm - Min. workpiece length: 180 mm Nedpfxswka H So Abmjli - Feed speed: 12.5 m/min - Extraction: - Jointing/milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Jointing/milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Min. air velocity: 20 m/sec - Jointing/milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Flörsheim

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical details Wheel diameter - max.: 2-45 mm Wheel width: 250 mm Module - max.: 1.5 mm Module - min.: 0.5 mm Control system: Fanuc 18i-MB Machine weight approx.: 2.2 t Space requirement approx.: 2100 x 1440 x 1700 mm Additional information The combined CNC hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is applied in the small module range. Simply by swiveling the milling spindle from the horizontal to the vertical position and selecting the respective operating mode on the CNC control, the machine can be switched from a worm milling machine to a hobbing machine and vice versa. CNC control Fanuc 18i-MB (conversational/ISO) CNC axes: X-axis: Plunge axis Z-axis: Longitudinal axis Nsdpfoxy Nhhsx Abmeli C-axis: Workpiece spindle B-axis: Tool spindle V-axis: Loader axis longitudinal A-axis: Swivel axis of the tool spindle head (included as an option) Y-axis: Shift axis (included as an option) Equipped with the following machining programs: - Worm milling - Gear hobbing - Worm hobbing - Bevel gear / spur gear milling - Bevel gear hobbing Milling cycles: - Straight, helical, crowned teeth - Radial, radial-axial, climb and conventional milling - Roughing, finishing - Worm gears - Straight-toothed bevel gears, face gear teeth (optionally in partial process only) - Worms [Equipment] - Coolant tank 300 liters with LNS Turbo MS 250 chip conveyor - Retrofitted and from year of manufacture 2021! - Kraft & Bauer fire extinguishing system - Spiral conveyor - Machine documentation [Technical Data] Workpieces: - Workpiece diameter: 2-45 mm - Max. workpiece length: 250 mm - Gear length: 150 mm - Max. module in steel: - 1 mm (gear hobbing) - 1.5 mm (worm milling) - 0.5 mm (bevel gear hobbing) Tools: - Cutter diameter: - 16-32 mm (gear hobbing) - 40-63 mm (worm milling) Machine: - Max. setting angle of milling head: - +/- 45° (hobbing) - +/- 30° (worm milling) - Shift path: - 34 mm (manual adjustment) - 34 mm (CNC axis) - Collet/Drawbar: W 20 - Max. speed of workpiece spindle: 770 rpm - Milling spindle drive: 0.55 kW - Max. speed of milling spindle: 8000 rpm Axis drives: - X-axis (plunge) / Travel: 80 mm via CNC - Z-axis (longitudinal feed) / Travel: 190 mm via CNC - C-axis (workpiece axis) via CNC Rapid traverse: - X-axis: 6000 mm/min - Z-axis: 6000 mm/min - Hydraulic unit: 0.37 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Edge banding machine Brandt KDF 530 C with jointing, corner rounding, two scrapers, and Riepe spray units. A video of the machine in operation can be sent upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Soundproof hood Extendable workpiece support Extraction connection 1x200 mm, 1x100 mm including the visible piping Nsdpfx Ajxd Dudsbmoli PC16 control unit with color display for easy machine operation Units: Manual upper pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Riepe separating agent spray system Joint milling with Leitz Whispercut diamond cutters, resharpened Gluing station switchable for conventional and counter-rotation Pressure zone with 3 rollers Cross-cut saw with 2 motors, programmable for straight or angled cuts Combination milling unit with motorized side adjustment Radius scraping blade R2, pneumatically adjustable Corner rounding R2 with diamond cutter, motorized, pneumatic adjustment between thin and thick edge Glue joint scraping blade pneumatically retractable with large roller Riepe cleaning agent spray system Polishing unit Hood lock CE mark Operating manual as folder and CD All indexable inserts for milling units and scraping blades have been replaced or rotated, saws sharpened, joint cutters resharpened, polishing discs replaced. The machine is thus ready for immediate operation. Only the diamond cutter of the shaping mill has not been replaced, but is still sharp. Minor paint touch-ups have been done. Approx. 3,500 operating hours. The machine's condition speaks for itself. Occasionally, the computer reboots while the machine is running (mostly at high ambient temperatures), but this has not posed an issue for us; operation can continue during reboot. Dimensions: approx. 4800 x 1200 x 1800 mm (LxWxH) Weight: approx. 1900 kg The machine can be inspected on site by appointment. We only offer machines that are fully operational and available for demonstration at our facility—see ‘More offers from this supplier’.

Kondisi: sangat baik (bekas), Curvilinear Element Sander OMAB/Comec Working width: 200 mm Sanding belt oscillation Pneumatic material feed pressure Main motor: 5.5 kW Nlodpfxjtvfmhs Abmji Feed motor: 0.25 kW Extraction connections: 2 x 100 mm Machine dimensions: 210 x 80 x 150 cm (H) Weight: 450 kg

Kondisi: bekas, Tahun pembuatan: 2012, Base machine Olimpic K 800 "T-ERL" (47), 1 pc STANDARD EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of work units - Swiveling control console - Support roller conveyor with ball-bushing guides along entire machine length - Protective and noise-reduction hood with separate doors between gluing and finishing units - Extraction ports arranged on the noise reduction hood - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber sliding pads, featuring a high coefficient of friction, mounted on 1¼” industrial chain - The chain runs on 2 guides made of hardened and ground steel, one round and one flat, to ensure straight feed and prevent lateral deviation - Automatic central lubrication for the feed chain - The upper pressure beam is a thick-walled steel structure fitted with double rows of roller bearings and protective device for pressure rollers - Manual lifting of the pressure unit with automatic positioning of the working units when changing panel thickness - Mechanical digital display for monitoring selected panel thickness CONTROL “ORION 100” Control system with PLC, allowing fast, simple, and error-free execution of individual processing programs (max. 60 programs). Manages pneumatic positioning of units, if equipped on the machine. (The control system does not include pneumatic positioning.) - Alphanumeric keypad and display - Function keys for quick access to processing units - Operating temperature range from 0 to +45°C MAIN FUNCTIONS: - Control of work units and automatic activation of motors - Monitoring and adjustment of glue pot temperature Nlodpoxq Apgefx Abmoi - Selection between longitudinal and cross processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: quantity, edge tape consumption, total chain feed distance - Measurement unit selectable in mm or inches Technical data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max edgebanding thickness, roll material: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. dimensions of edge strip: 135 mm² Rotary table diameter: 780 mm Max. excess relative to panel thickness: 4 (2+2) mm Min. panel width (with minimal 210 mm length): 55 mm Min. panel length (with minimal 100 mm width): - with strip or roll edge max 3 mm: 140 mm - with solid wood edge: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard equipment: - Pre-milling unit at infeed RT-E - Edgebanding station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for flat scraper - 1 S free space for flat scraper, universal mill, or buffing unit - 1 F free space for blowing nozzle unit European safety regulations (CE marking) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for versions ER2, T-ERS, and T-ERL Enables all necessary adjustments during every job change, directly from the control console. Includes: - Time-controlled pressure unit - Pneumatic and independent swiveling of the end saw blades (front/rear) - Pneumatic remote adjustment for the flush trimming unit RI/800

Kondisi: baik (bekas), Flat gear motor, geared motor, electric motor, electric geared motor, variable-speed geared motor, adjustable geared motor -Brake: disassembled -Manufacturer: Nord, variable-speed geared motor -Type: SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5–109 rpm -Motor: Type SK 112 M/4 BRE60 Nlodjwl Uxlopfx Abmji -Power: 4.0 kW -Protection class: IP54 -Shaft: Ø 45 x 90 mm -Brake torque: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 450 kg, jenis arus masuk: tiga fasa, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, – Italian-made – Year of manufacture: 2016 – Pre-milling – Technical documentation (DTR), CE certificate TECHNICAL PARAMETERS: – Edge thickness: 0.5 – 3 mm – Solid wood edging: 0.5 – 5 mm – Workpiece height: 8 – 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min – Pre-milling – Radius cutters – Edge trimming – Radius scraper – Straight scraper Nodpewb Ha Tefx Abmsli – Air blow-off on each unit – Working pressure: 8 bar – Working machine length: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg

Kondisi: sangat baik (bekas), jam operasional: 1.500 h, - Shear rotor tipe MEWA UC 201 - Penggerak listrik 2 x 75 kW Nodpfxoxyz Rhe Abmoli - Panjang rotor: sekitar 2 meter - Lebar pisau: 70 mm - Termasuk konveyor sabuk rantai untuk pengeluaran produk Ini adalah mesin yang sangat kuat untuk penghancuran, misalnya, ban dan logam non-ferro.

Kondisi: bekas, Tahun pembuatan: 2018, panjang total: 5.370 mm, tinggi total: 1.600 mm, lebar total: 1.020 mm, trans_001 Nledjxyy Ryopfx Abmoi

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, I have two identical LORENZ LS 304 CNC gear shaping machines for sale. Both machines were manufactured in 1986—one is blue, the other is green. They are both equipped with a BWO CNC 900 control system. Each machine weighs approximately 8.3 tons. These machines come from a special production department at ZF. In the past twenty years, the machines have been regularly upgraded and modernized. Upgrades include, among others, new hydraulic hoses, control cabinet components, various drive motors, as well as the installation of relatively new ELBATRON extraction systems, all in compliance with German production and safety standards. The machines have been continuously maintained and serviced. Technical specifications: - Maximum shaping cutter diameter: 300 mm - Maximum workpiece diameter: 400 mm Nodoxyuy Nspfx Abmoli - Maximum module: 6 - Minimum module: n/a - Gear width: n/a - Table diameter: n/a - Table bore: n/a - Strokes per minute, shaping/scraping: n/a - Total connected load: 11 kW - Machine dimensions: n/a - Control system: CNC - Control system manufacturer and type: BWO CNC 900 Both machines are in excellent condition. They run smoothly, precisely, and reliably, and are immediately available for operation.

Kondisi: baik (bekas), Gear motor, electric motor, geared electric motor, helical gear motor - Manufacturer: Nord, gear motor with frequency inverter - Model: SK 02-71 L/4 TF TR1 i= 6.89 Nodewpgidjpfx Abmsli - Speed: 205 rpm - Motor: Nord type SK 71 L/4 TF TR1, 0.37 kW - Frequency inverter: Nordac Trio SK 370/1 TR - Shaft: Ø 20 x 40 mm - Quantity: 3x gear motors available - Price: per unit - Dimensions: 420/160/H285 mm - Weight: 16.2 kg