Beli Tepi Tot bekas (20.991)

Kondisi: bekas, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for unit adjustment Pre-milling unit for pre-milling before gluing station Fully automatic edge magazine for roll and strip material GLU-JET cartridge adhesive application station + PU bonding Adhesive application by nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Nwedpfx Ajxu E Nwogyjp Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic switchover from 0-10° inclination for end saws Pneumatic milling unit, flush trimming up to 6 mm, radius milling - chamfer milling - 15°, programmable via control panel Scraper unit for chamfers and radii with 2 scraper holders Pneumatic infeed and outfeed Flat scraper unit - finish Spray device - PU Machine is FACTORY-REFURBISHED and in TOP CONDITION

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Nwodpsxvirfefx Agyjp Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg - immediately available -

Kondisi: hampir baru (bekas), Edge milling machine for deburring/chamfering various internal and external contours. Adjustable chamfer size up to 10 mm at 45°. Cutter 45° / 8 cutting edges, double row – KIF/MF. Suitable for steel, light metal, stainless steel (VA), cast iron, and non-ferrous metals. Includes 21 packages of 10 pieces each of indexable inserts X11.30.35.45 P25 BS TiCN. Includes 7 packages of 10 pieces each of fixing screws for X11.30.35.45. Available at extra cost: - 1 milling head 30° Nwsdpstwcn Rsfx Agysp - 1 milling head 35° - 1 milling head 45° - 1 milling head 60° Ex works, plus VAT.

Kondisi: baru, kecepatan pemakanan sumbu X: 7 m/menit, tinggi benda kerja (maks.): 50 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, With corner copying, suitable for plastic edges from 0.4 to 3 mm, solid wood edges up to 3 mm, and workpieces from 8 to 50 mm, with pneumatic adjustment Panel thickness: 8 – 50 mm Edge thickness: 0.4–3 mm (coil material) Jointing: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Top-spec configuration for high productivity in a compact footprint! Intuitive operation via eye-S control and large 10" touchscreen: HMI Maestro Active Edge; graphical display of all processing units and their operating status; graphical simulation of machining operations; control of all processing units; regulation of the glue pot temperature; assistant functions for machine setup according to the machining program; error diagnosis for quick resolution of simple faults; statistics of processing parameters; USB connection; prepared for network connection; prepared for Industry 4.0 with API REST data transfer protocol Outstanding accessibility to the working units thanks to the large hood, providing protection and noise reduction Monoblock steel frame construction ensures high stability and rigidity Automatic unit positioning when changing panel thickness Trimming and corner rounding unit (me 35 tr s): for trimming the edge as well as rounding corners on the top and bottom; for edging of solid wood edges, trimming is done by the radius cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber glide pads Extendable workpiece support Infeed fence adjustment via spacer plates Dimensions and weights Length (product): approx. 3314mm Width/depth (product): approx. 1085mm Height (product): approx. 1300mm Weight (net): approx. 623kg Flush radius milling unit Power consumption: 2 x 0.35kW Cutter diameter: HM 55.3mm Cutter speed: 12,000 rpm Extraction connection diameter: 60mm Number of extraction ports: 2 Corner copying unit Power consumption: 0.35kW Tool diameter: 58mm Speed: 12,000 rpm Electrical data Operating voltage: 400V Frequency: 50Hz Glue unit Glue pot power consumption: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed power consumption: 0.55kW Feed speed: 7m/min Edges Nsdpfoxxvanjx Agyewp Edge thickness (coil material): 0.4–3.0mm Pre-milling unit Extraction connection Ø: 2 x 80mm Power consumption: 3kW Cutter speed: 7,200 rpm Diamond cutter Ø: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Power consumption: 2 x 0.14kW Speed: 2,800 rpm Workpiece Workpiece thickness: 8–50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Kondisi: siap digunakan (bekas), Very good condition. Nedpfx Ajvunm Aogyswp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Terdiri dari: - Meja pengumpan Profi TBL100/20/06 (HOMAG, Tahun 2014) - Profi KAL310/7/A3 (HOMAG, Tahun 2014) Nwedpfx Aeqi Hqiogyop KAL cocok untuk pengerjaan papan kayu berlapis: - dengan edging melamin 0,3-0,4 mm - dengan edging ABS dan PP 1,0-2,0 mm (Tersedia alat: R 1,0 1,5 2,0) Mesin juga dilengkapi satuan pembuatan alur untuk grooving dan rabbeting secara vertikal dan horizontal. Konfirmasi pesanan lengkap dapat dikirimkan jika diminati. Pembongkaran dan pemuatan mesin menjadi tanggung jawab pembeli sendiri.

Kondisi: bekas, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty design – edge thickness 0.4 - 5 mm PLC touchscreen control Large LCD display Pre-milling unit for edge preparation before gluing section Fully automatic edge magazine for rolls and strips Adhesive application unit for cartridge and PUR bonding Maximum edge height: 51 mm automatic glue height adjustment Pressure unit 1913, motorized and pneumatic End trimming unit for rolls and strips With pneumatic adjustment of 0-10° tilt for trimming saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for machining different radii – chamfers – flush trimming via PLC Corner copying unit 1832 for corner rounding up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfer and radius Pneumatic engagement/disengagement Finish surface scraper Regularly serviced by Holz Her Machine is FACTORY SERVICED and in TOP CONDITION Nwsdpfx Aoxuhpasgysp Available from stock Lieboch

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: MR005128, Bekas pakai ringan: Mesin edge banding dengan unit lem, unit pemotong ujung, dan unit frais rata. Mesin ini cocok untuk edging band hingga ketebalan 2 mm dan panel hingga ketebalan 50 mm. Spesifikasi teknis: - Ketebalan edging band minimal: 0,4 mm - Ketebalan edging band maksimal: 2 mm - Ketebalan panel minimal: 12 mm Nedpfx Ajxxx Dijgyjwp - Ketebalan panel maksimal: 50 mm - Panjang panel minimal: 180 mm - Lebar panel minimal: 65 mm - Kecepatan feeding: 6 m/menit - Volume reservoir lem: 0,5 kg - Unit pre-milling: Tidak ada - Unit pemotong potong: Pisau kap - Nomor seri: KK /138932

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tipe: Mesin Edge Bander Satu Sisi Pabrikan: BRANDT Model: Optimat KDF 550 C Tahun: 2008 Nwedpsxwwb Rofx Agyop Lokasi: Lituania Ketentuan: apa adanya di lokasi Ketebalan papan: 60 mm Ketebalan edge: 8 mm Kecepatan feed: 11 m/menit Dimensi (P x L x T): 5860,0 × 1560,0 × 230,0 mm Bobot: 2600 kg Kecepatan feed: 11 m/menit Ketebalan benda kerja: 8 – 60 mm / ketebalan edge: 0,4 – 8 mm / tinggi kerja: 950 mm Catu daya listrik: 400 V – 3 fase – 50 Hz / tekanan pneumatik: 6 bar / tingkat kebisingan: 80…87 dB(A) Diameter ekstraksi: 1 × 120 mm / 2 × 100 mm / jarak antar rol: maks. 3.0 × 45 mm / 0.8 × 65 mm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.774 mm, ketebalan tepi (maks.): 3 mm, berat keseluruhan: 842 kg, tinggi pelat: 50 mm, For plastic edges from 0.4 to 3 mm, solid wood edges up to 5 mm, and workpieces from 8 to 50 mm Panel thickness: 8 – 50 mm Edge thickness: 0.4–3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top features for high productivity with minimal space requirements! Intuitive operation with eye-S control and a 10” touchscreen: HMI Maestro Active Edge Graphical display of all processing units and their operating status Graphical simulation of processing operations Control of all machining units Regulation of glue pot temperature Assistance functions for machine setup according to the processing program Error diagnostics for quick resolution of simple faults Statistics on processing parameters USB connection Prepared for network connection Excellent accessibility to working units thanks to the large hood, providing protection and noise reduction Automatic adjustment of unit positions when changing panel thickness Panel feed via feed chain with rubber sliding shoes Quality Made in Italy Equipment details 10" touchscreen control panel Optimal machine management with the new 10" touchscreen control panel featuring Maestro active edge, displaying all machine functions graphically Pre-milling unit Two DIA cutters Glue station The glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during extended machine idle times Teflon-coated glue pot for easy glue change Device for recycling unused glue Automatic application of coil edges with guillotine for edges up to 3 mm 730 mm diameter turntable Self-lubrication of the glue pot Quick-change kit for the glue pot Flush/radius milling unit With tracing rollers in horizontal and vertical directions for optimal tool positioning Equipped with a combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via two digital readouts With chip extraction Flat scraper Absolute cleanliness for a perfect finish on the surfaces of the workpiece With rotating copying device Buffing unit Powered by two independent, swiveling, and height-adjustable motors For perfect cleaning and polishing of the panel edges Radius scraper With digital position indicator Nodpfx Agsxxuvbjyowp For perfect finishing of plastic edges With device for retracting the unit when not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed

Kondisi: baik (bekas), Tahun pembuatan: 2006, • Glue pot • Conversion: carried out by Hüttenhölscher GmbH in Verl • Application area: adhesive application unit for handle rails • Vacuum table: included Nedpjibdyqsfx Agyewp • Automatic pressure zone: included

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2650 x 640 x 1400 mm Weight: 700 kg Total power requirement: 5 kW Edge banding machine KANTOMAX BASIC - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 55 mm - Min./max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edging - Pressure zone with pneumatically operated main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, operating temperature 180 - 200 °C - Pneumatic guillotine shears Njdpfovz E T Hex Agyjwp - Pneumatic cylinder for workpiece separation - End trimming unit for front and rear edge overhang -- High-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pulling cut for high accuracy - Top and bottom flush and radius trimming unit with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from above, below, and side, for rounding pre-milled PVC edges - Buffing unit for finishing edges top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, height adjustable - Total power consumption 5.0 kW / 400 V - Extraction nozzle Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Nodpfxjd Hints Agyjwp Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Stasiun pertama: penghilangan gerinda pada tepi pelat logam, Stasiun kedua: penghilangan gerinda pada takikan dan jari-jari luar, dengan sikat VA; ketebalan pelat maksimum: 5 mm Nwjdpfxjxxbm Hj Agysp

Kondisi: bekas, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Single-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: Roll material 0.4 – 3 mm Solid wood strips up to 5 mm Workpiece thickness: 10 – 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying at 16, 18 & 19 mm thickness: feed speed 12 m/min Aggregate configuration: RIEPE separating agent application Joint trimming unit with 2 counter-rotating, actuation-controlled motors, equipped with diamond-tipped spiral cutterheads Option: diamond cutter tools, height 65 mm instead of 30 mm Automatic edge feeding with rotating roll table, diameter 800 mm, with automatic strip magazine, spike roller for solid wood strips Glue pot with automatic temperature control and standby function, glue roller temperature adjustable separately, capacity approx. 1.5 kg Option: glue run-out function, Teflon-coated drip tray, adapted software for EVA/PU glue Option: quick-change system for glue pot Pressure zone with 1 driven main pressure roller and 2 free-running follow-up rollers End trimming unit with 2 HF motors, 0.55 kW Nsdpoxugpljfx Agyowp Pneumatically tiltable 0 – 10 degrees, controlled from the operator panel Combination milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal and vertical tracing, motorized positioning via control system Option: nesting package for combi-milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges with up to 2 mm edge thickness (Not recommended for soft & postformed profiles) With 2 motors, 0.27 kW Two L-Motion motors each for positioning the horizontal tracing shoes as well as the tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Option: nesting package for radius scraper Flat scraper unit with pneumatic in/out control via the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW Control system: 18.5-inch graphic touchscreen with L-Motion software Option: floating contact for connection to a return conveyor system Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity. The return conveyor system shown in the photos is not included in the scope of delivery.

Kondisi: sangat baik (bekas), dua unit frais dua motor dengan daya 1,5kW penekanan pneumatik unit pengamplasan sepatu penekan lebar sabuk maksimum 80mm daya motor 1,5kW osilasi pneumatik pengaturan unit pada dua sumbu pengaturan kecepatan umpan secara halus Nwodoxf Indjpfx Agysp tegangan 380V

Tahun pembuatan: 1988, Kondisi: bekas, with lateral cross-cut saw Nsdpfxjbaz E Aj Agyjwp

Kondisi: baik (bekas), Tahun pembuatan: 2006, CNC Multitron PS 10Control system: Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Cutting speed 15 - 105 m/min Technical details Cutting diameter 320 mm Nodjv I Rfujpfx Agyjwp Saw band length 3280 mm Cutting width 320 x 320 mm Total power requirement 3.8 kW Machine weight approx. 115

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T/41242, tinggi benda kerja (maks.): 52 mm, ketebalan tepi (maks.): 12 mm, tinggi kerja: 880 mm, berat kosong: 3.000 kg, kecepatan throughput: 233 mm/dtk, TECHNICAL DETAILS Operation: Single-sided, right-hand version Edge thickness: 0.2 - 12 mm Workpiece Dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 - 14 m/min Working height: 880 mm MACHINE DETAILS Processing Units Njdpfxjxtfche Agyowp Jointing section with 2 HF motors, 1.5 kW Double end trimming unit with 2 HF motors, 0.3 kW Flush trimming unit with 2 HF motors, 0.7 kW Fine bevel trimmer (CHAMFER) with 2 HF motors, 0.3 kW Fine radius trimmer with 2 HF motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double pressure roller unit with electronic positioning Automatic roll magazine for rolls up to 800 mm diameter with pneumatic cutting device for 3 mm thickness Automatic edge magazine with optical control for strip edges in fixed lengths Infeed fence with automatic positioning upon input of jointing value CM - CombiMelt - gluing system in modular design Control system via 7-inch TFT touch color display 100 machining programs freely storable alphanumerically PLC for high-resolution routing control Individual frequency converters for selective activation of processing motors Hole detection for skipping CNC machining operations Network capability for integration into a data network

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Nwodewka Nyopfx Agyop Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, nomor mesin/kendaraan: 008107, Posisi 1: Mesin edge banding satu sisi HOMAG + LIGMATECH-KAR 310/9/A20/S2 Nwodpfsw U Rqzjx Agyop Posisi 2: Mesin pengembali panel HOMAG + LIGMATECH-KAR 310/9/A20/S2

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit - Cross-cutting unit - Milling unit Nwodpfed Inktex Agyep - Fine milling unit - Scraper - Buffing unit

Kondisi: bekas, nomor mesin/kendaraan: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Nwjdpfx Aewuz E Rjgyjp Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Number of working units: 9

Kondisi: bekas, nomor mesin/kendaraan: 008148, translation-001 Nwedpoxtugcsfx Agysp

Kondisi: bekas, nomor mesin/kendaraan: 008105, Jenis pinggiran terpasang: pinggiran tipis, pinggiran tebal, kayu solid Sistem lem: EVA Penyambungan penggilingan: ya Nwodew Idgpepfx Agyep Unit multifungsi: ya Unit penggilingan atas: ya Kecepatan makan maksimum: 18 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 9 buah