Beli Thermoforming bekas (166)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 202-052, lebar film: 570 mm, jenis arus masuk: tiga fasa, tekanan: 6 batang, lebar total: 25.800 mm, panjang total: 82.200 mm, tinggi total: 22.800 mm, Used thermoforming machine, operational, suitable for PET, PS, PP. The machine is still in production use, but is available immediately. Todpfxjrh E Ibj Aatjf

Kondisi: bekas, Fungsionalitas: belum diuji, This Illig SB 74 D is being offered for sale; it is suitable for skin packaging, but not for blister applications. Todpowpvbpefx Aatef Please request technical specifications separately.

Kondisi: sangat baik (bekas), GEA thermoformer, type: PowerPack NT, year of manufacture: 2014, film width: 650 mm, tooling: 4 x 3 (156 mm x 190 mm), dimensions: 14,500 mm x 1,300 mm x 2,800 mm Tedpjhkr Ddsfx Aatof GEA PowerGuide Speed in-line aligning conveyor, year of manufacture: 2013, 3-to-1 alignment, belt width: 830 mm, dimensions: 2,900 mm x 1,050 mm x 1,300 mm

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F.24442.03.03, A unique opportunity for serial producers Todewpd Rrspfx Aatsf We are offering you an immediately available, top-quality thermoforming linear system featuring automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hot-melt extraction, heater enclosure, and many other special features, directly from the manufacturer FRIMO. Most recently, the system was used for the production of automotive door panels. The film itself was coated with hot-melt adhesive. However, the system can also be used for dispersion adhesives (adhesive applied to the carrier parts). Very large components are possible, with a forming area of up to 800 x 2,000 mm. The maximum forming height is 250 mm. Extremely fast cycle times of less than 60 seconds are easily achievable. The system was regularly maintained and was in operation until it was dismantled. Currently, the unit is professionally stored at our facility in Hungary. We have locations worldwide and can support you directly at your site. We can deliver this system anywhere in the world on a project basis, install it at your facility, train your staff, and provide you with technical consultation. Any type of retrofitting and modernization is also possible. Simply contact us with your individual project requirements!

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1506, lebar film: 1.000 mm, jenis arus masuk: tiga fasa, tekanan: 6 batang, lebar total: 700 mm, panjang total: 1.000 mm, tinggi total: 350 mm, tegangan masuk: 400 V, ketebalan lembaran (maks.): 10 mm, kapasitas pemanasan: 30 kW (40,79 hp), berat keseluruhan: 1.500 kg, tinggi alat: 490 mm, Maschinentyp: ILLIG UA 100 G Maschinennummer: 1506 Baujahr: 1988 Gesamtgewicht: ca. 1,5 Tonnen Tedpfxswfdd Ds Aatef Stromversorgung: 3x400V Gesamtanschlussleistung: 35 kW Gesamtheizleistung (Unter- und Oberheizung): 30 kW Heizplatten-Typ: Keramik Maximale Foliengröße: 1000x700 mm Minimale Foliengröße: 310x210 mm Maximale Folienstärke (Handbeladung): 12 mm Maximale Verformungsfläche: 960x660 mm Minimale Verformungsfläche: 270x170 mm Maximale Positivhöhe des Formteils: 350 mm Maximale Negativhöhe des Formteils: 350 mm Maximale Werkzeughöhe: 490 mm Die Maschine wurde ca. 2020 überholt. Das ursprüngliche Schleicher-Steuerungssystem wurde durch ein neues Omron-Steuerungssystem ersetzt. Außerdem wurden die Verkabelung und der Schaltschrank überholt.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 589-0263, de7f6d0c-0f51-4b35-9e6a-1f83e7ad8ebf Tedpouzi I Eofx Aatef

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 19.000 h, Fungsionalitas: berfungsi sepenuhnya, Gabler M92L termoformadora, en excelente estado de funcionamiento. Tedpfx Aswcdvneatof

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 2000 x 1000 mm Moulding area: 1960 x 960 mm Drawing depth: 600 mm Tedpfxjwf Ebwj Aatef If you would like further details or a quotation, please feel free to contact us.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: DHD/250/100, langkah bantalan cetakan: 200 mm, tinggi total: 4.500 mm, lebar meja: 1.200 mm, panjang meja: 1.000 mm, tinggi pemasangan: 900 mm, gaya penekanan: 250 t, panjang total: 2.000 mm, lebar total: 2.700 mm, tinggi kabinet kontrol: 1.800 mm, panjang kabinet kontrol: 800 mm, lebar kabinet kontrol: 500 mm, gaya bantalan cetakan: 100 t, kecepatan operasi: 170 mm/dtk, kecepatan mundur: 250 mm/dtk, tegangan masuk: 400 V, panjang langkah: 600 mm, tekanan: 235 batang, sekring listrik: 63 A, lebar pelat tuas: 1.200 mm, panjang pelat penekan: 1.000 mm, Trade fair machine Euroblech 2024 – Location Hamburg. Tedottriaepfx Aatef

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, lebar total: 17.500 mm, panjang total: 68.000 mm, tinggi total: 19.000 mm, berat keseluruhan: 5.500 kg, Universelle und äußerst erfolgreiche Blistermaschine im mittleren bis hohen Geschwindigkeitsbereich mit intermittierender Plattensiegelung. Formatbereich: - Max. Formfolienbreite: 300 mm - Max. Vorschub ET: 280 mm - Max. Vorschub MT: 97 mm - Max. Stanzbreite: 284 mm - Max. Ziehtiefe: 10 mm für PVC - Materialien: Form-PVC / PVDC / ACLAR Im Preis enthalten sind folgende Maschinenausstattungen: - Numatic-Ventile - Formfolien-Abrollständer - Formfolien-Puffer - Vorratsüberwachung für Formmaterial - Abwicklungseinheit für Formfolie - Formstation für PVC-Folie - Folienstoß-Erkennung für Formfolie - Temperaturüberwachung für Heiz- und Siegelstationen - Teile für Abluftabzug ohne Ablufteinheit - Formstation ohne Plug-Assist - ET-Indexstation nach der Formung - Dosierstation mit rotierender Bürste und Sicherheitsklappe - Elektrische Vorbereitung für das SimTap 2i Zuführsystem - Füllkontrolle-Inspektionssystem VisioChrom-CV - Deckfolienabwicklung - Vorratsüberwachung für Deckmaterial - Druckmarkensteuerung über Längsdehnung (Streckvorrichtung) des Deckmaterials - Folienstoß-Erkennung für Deckmaterial mit 2 Sensoren für Innen- und Außenseite - Siegelstation - Kühlstation nach dem Siegeln - Index nach dem Siegeln - Prägeeinheit - MT-Indexstation - Stanzstation - Querabführung der Blister Leistung: max. 600 Blister Todpsr Nv Icefx Aatef Index: max. 280 x 284 mm Formhöhe: max. 10 mm

Kondisi: siap digunakan (bekas), Spare parts package for Kiefel KMD 85 consists of electronics, gearboxes, and motors—see photos for details. Chain conveyor is available but not shown in the pictures. Tsdpoq Evmcefx Aatjf

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, de-DE: Marke: Kiefel Modell: Natureformer KFT 90 Speed Baujahr: 2022 Zustand: Neu – Die Maschinen sind ungeöffnet und befinden sich noch in der Originalverpackung von Kiefel. Formfläche: 900 x 600 mm (35,5 x 23,5 Zoll) Maximale Formtiefe: 120 mm (4,75 Zoll) Stanzkraft: 600 kN Tjdpfjwkkpqsx Aatof Maximales Schussgewicht: 300 g (10,5 oz) Taktzeit: 15 Sekunden +/- Das abgebildete Maschinenfoto dient nur als Beispiel. Die Maschine wurde noch nicht installiert.

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 191, jenis arus masuk: tiga fasa, tekanan: 10 batang, lebar total: 3.050 mm, panjang total: 2.400 mm, tinggi total: 3.480 mm, lebar kabinet kontrol: 850 mm, tinggi kabinet kontrol: 1.800 mm, panjang kabinet kontrol: 600 mm, This machine was overhauled in 2020, then installed at a customer's site, and has been used minimally, if at all. The machine is in excellent condition. It has been professionally disconnected and transported. Tedpfx Aaowpfrkstof

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Draw depth: 600 mm Tjdpfswf D S Usx Aatsf If you require further details or a quotation, please feel free to contact us.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1594, TECHNICAL DETAILS Todpfxjww Igys Aatsf Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Motor power: 3.52 kW Heating capacity: 216.0 kW Rated operating current: 86.5 A Permissible air pressure: 10 bar

Tahun pembuatan: 1999, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, A used and refurbished blister machine, model UPS1030 ET (94/125) Technical Data - Format range: Maximum feed width: 142 x 255 mm Maximum forming depth: 10 mm Tedpsr Ii R Uefx Aatef - Output at least: 15 cycles/min - Maximum output: 70 cycles/min (PVC) - Maximum output: 50 cycles/min (ALU) Included: - Forming film roll holder with two tension shafts, for maximum roll diameter of 800 mm, electromechanically foldable, including cutting and bonding table, painted neutral grey - Continuous feed of forming material with a non-contact loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum forming film with 4-column guide system - Electrical preparation for pore and crack detection (Visio-Scan) - Clamping jaw for securing forming film in the forming station when the machine is stopped - Servo-driven feed after the forming station, compensates for film shrinkage - Contact cooling with servo-driven feed - Cooling water connection for upper and lower forming tools and lower sealing tool - Deflection with compensating pendulum - Filling section, approx. 1900 mm with angled brush and safety flap - Electrical preparation for SimTap 2.i and brush-infeed - Sealing station for platen sealing and toggle lever drive, with 4-column guide (reinforced version with adjustment domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted at the rear of the machine with 2 pneumatic tension shafts, core diameter 76 mm - Deflection shoulder for cover film with pressure presence monitoring - Stretching station for cover film with touch probe-controlled stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Adjustable punching station, including blister lowering - Scrap cutter with integrated feed for immediate separation of the waste grid - Compressed air monitoring - Sliding door cladding, protective doors electrically interlocked for emergency stop when activated, dual-channel, made of Plexiglas, foldable hood in the transfer area - Switch cabinet foldable at the rear of the machine, mains 400/230 Volt, 3/N/PE 50 Hz with neutral conductor and separate grounding. The stations have been completely refurbished, and all obsolete components were replaced at the time of refurbishment. - Schneider PacDrive3 system with Pac2Touch - Machine painted RAL 9007 - Linear transfer with: o Lowering unit in the punching station o Good product discharge below punch with sliding rails o Individual vacuum transfer o Individual ejection with discharge verification o Collection conveyor with separate drive o Transfer conveyor o Good product removal at downstream machine standstill - CE compliance with declaration of conformity - Two sets of operator manuals

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1531, suhu operasional: 650 °C, panjang pelat: 1.000 mm, lebar pelat: 700 mm, TECHNICAL DETAILS Film width: 700 mm Type of input current: Alternating current (AC) Input voltage: 400 V Plate thickness: 10 mm Plate dimensions: 1,000 x 700 mm Operating temperature: 650 °C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Todpfx Aaowr Ab Ustof Forming height (min.): 300 mm MACHINE DETAILS Overall width: 700 mm Overall length: 3,500 mm Overall height: 3,500 mm Control cabinet width: 1,000 mm EQUIPMENT - Top heating: 3 pilot emitters, bottom heating: 1 pilot emitter - Counter-mold height motorized adjustment - Fast clamping of upper and lower frame - Quick clamping of tools on the lower table - Quick clamping of the tool on the upper table - Monitoring of the sagging of the bottom film - Bubble formation controlled by electric photo cell - Storable bubble and demolding intensity, pneumatic valves in cascade arrangement - Vacuum pump: BUSCH, 100 m³/h

Kondisi: diremaj di bengkel (bekas), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Tedpfx Aowf D R Reatsf Draw depth: 600 mm If you would like more details or a quotation, please feel free to contact us.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 45.353 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1537, tinggi produk (maks.): 10 mm, panjang pelat: 1.000 mm, lebar pelat: 700 mm, Hybrid machine for thermoforming sheets or coils TECHNICAL DETAILS Maximum width: 700 mm Maximum plate size: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating capacity: 31.1 kW Tedjwr Abzopfx Aatef Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating - Coil unwind unit type PR - Upper and lower tables - Schleicher PDPF control director - Quick clamping for reduction frames and tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Tipe: distributor Nomor seri: 202302 Tahun pembuatan: 2020 Hopper: 4 x 2 unit Ukuran hopper: 135 x 185 mm Area pengisian: 545 x 375 mm Tinggi keluar: 900 mm Udara tekan: 6 - 8 Bar Dimensi: 920 x 1700 x 2350 mm Digunakan untuk mendistribusikan produk beku ke dalam thermoformer Dengan seluncuran penolakan produk Tjdpfx Aajxzfnmjtjf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.500 mm, Slightly used ORMA MEMBRANE PRESS, model DUPLEX 30/15 vacuum press with preheating oven/table for acrylic and thermoplastics. Has only seen occasional light project use. Suitable, for example, for machining Corian sheets. An alternative to a new machine. Pressing area: 3000 x 1500 mm Vacuum pressing force over the entire working area: 44 tons 11 tons/m² Max pressing height of the workpiece: 500 mm ORMA HEATING OVEN/TABLE 30/15 FOR ACRYLIC AND THERMOPLASTICS • Heated by electric resistance and air circulation • Heated area: 3000 x 1500 mm • Max height of heated workpiece: 100 mm • Heating power: 18 kW • Maximum temperature: 200°C • Temperature digitally adjustable from the control panel The device frame is a welded heavy-duty steel beam construction with welded steel plates. There is an insulation layer between the galvanized steel plates of the oven’s inner and outer surfaces. The heating oven opens manually, guided by rails, and is equipped with transfer wheels. The membrane press table is made of phenol-coated plywood, grooved for improved vacuum distribution. The upper table, where the membrane film is mounted, opens 45 degrees and is fitted with gas struts. The upper table has fast and easy locking. Manual quick-mount system for membrane film. Vacuum system with a single 25 m³/h vacuum pump. Control panel mounted at the left end of the machine includes: • Main switch • Control indicator lamp • Emergency Stop push button Tjdpfx Aexz Rhfjatef • Temperature monitoring/adjustment • Vacuum pump status indicator (on/off) • Heating system status indicator (on/off)

Kondisi: bekas, Gebrauchte Abfülllinie von TANG OG WEISS AS (DK) zur Verpackung von Flüssigkeiten in Kunststoffflaschen. Geeignet für Füllvolumina von 50 ml bis 750 ml. Leistungsdaten der Linie: - Für Flaschen mit 750 ml Volumen: bis zu 600 Stück/h - Für Flaschen im Bereich von 200 bis 400 ml: ca. 800–900 Stück/h - Für kleinere Flaschen ist eine Kapazität von etwa 1.000–1.200 Stück/h realistisch. Die Linie setzt sich aus folgenden Komponenten zusammen: - Flaschenzuführbehälter von PACKFEEDER S.L. (Spanien), Modell MN 100-4 - Füll- und Verschließeinheit von TANG OG WEISS AS (DK), Modell TWKS. Beinhaltet das Füllmodul TWRF mit zwei Füllventilen, einen Puffertank aus Edelstahl (Gesamtvolumen 15 l), Rundlauftisch, Verschlusszuführung, Verschließarm und Plattenförderer - Edelstahl-Drehkolbenpumpe von SSP PUMPS (England), Modell L2-0017, zur Förderung des Produkts in den Puffertank - Etikettiermaschine von EME Etiketteringsmaskiner ApS (Dänemark), Modell 4-120 (4000 Serie), ohne Drucker, ausgestattet mit Plattenförderer und zwei Selbstklebe-Etikettierstationen (Vorder- und Rückseite der Gebinde). Etikettenzuführungshöhe: 20–120 mm, -breite: 10–250 mm, Arbeitsgeschwindigkeit: 0–40 m/min Todpfxjxw Tgpe Aatof - Automatische Folieneinschweißmaschine von SKINETTA PAC-SYSTEME GMBH & CO. (Deutschland), Modell ASK 450. Die Maschine umwickelt 6er-Packs mit Schrumpffolie und verschweißt/thermoformt sie. Einlauföffnung zur Schrumpfsektion: Breite 440 mm, Höhe 320 mm (Baujahr 1994, ohne Dokumentation) - Plattenförderer und Steuerpulte Im Lieferumfang enthalten: Schrank mit Formatteilen für ovale Flaschen (Volumen 50, 200, 400, 750 ml), Herstellungsdokumentation in Dänisch und Bedienungsanleitung auf Polnisch. Baujahr der Linie: 2007.

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Oven for Plastics Processing This oven is suitable for processing thermoplastics. Manufacturer: Reinhardt Model: VL Tsdpfswp Em Ujx Aatsf Year of manufacture: 1991 Serial no.: 8182 Connected load: 50.2 kW Voltage: 380 Volt Operating temperature: 50 - 200 °C Trolley dimensions approx.: 2000 x 1200 mm (W x D), 500 mm opening

Tahun pembuatan: 2025, Kondisi: baru, Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Tjdpfx Asd Ecc Tjatof Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: ex stock 54634 Bitburg - loaded, free of charge -

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: ex stock 54634 Bitburg Tedpfx Aedvldaoatjf - loaded, free of charge -