Beli Toyoda bekas (14)

Tahun pembuatan: 1980, Kondisi: baik (bekas), steuernung-nct-700x500mm-hu-202406 Ijdoxzu D Dopfx Aa Netb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, de-2011 (Inbetriebnahme 2015) Tisch - Größenbereich: 630 mm - Positionierung des Untertisches: 1° - Positionierung des Rundtisches: 0,001° - Palettenhöhe: 1200 mm Verfahrwege - X-Achse: 1000 mm - Y-Achse: 800 mm - Z-Achse: 850 mm - Abstand Spindelmitte zu Tischoberfläche: 200 mm – 1050 mm - Abstand Spindelmitte zu Oberkante Verfahrweg: 100 mm – 900 mm Vorschub - Eilgang (X-, Y- und Z-Achse): 60 m/min - Arbeitsvorschub (X-, Y- und Z-Achse): 0,001 – 30 m/min Spindel - Spindeldrehzahl: min. 14.000 U/min / 35 Werkzeugwechsler (ATC) - Werkzeugplätze: 60 Stk. - Werkzeugwechselzeit (Werkzeug zu Werkzeug): 2,4 s - Verwendete Werkzeuge: SK 50 / Aufnahme Zapfen BT Kapazitäten - Betriebsöl: 53 l - Führungsbahn-/Spindelkopf-Schmieröl: 3,0 l - Kühlmittel für Spindel & Kugelrollspindel: 37 l Services / Leistungen - Positioniergenauigkeit (X-, Y- und Z-Achsen): ± 0,003 mm - Wiederholgenauigkeit (X-, Y- und Z-Achsen): ± 0,0015 mm - Paletten-Nutzlast: 800 kg - Axiale Belastbarkeit: 14.700 N Ijdpfjnmx Tpex Aa Netb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, TECHNICAL DETAILS Travel X: 750 mm Travel Z: 800 mm Travel Y: 850 mm Magazine positions: 120 Spindle Speed range: 50–15,000 rpm Spindle diameter (front bearing I.D.): 80 mm Spindle taper: ISO R297 / Taper No. 40 Tool holder: MAS I Type P40T Table Pallet size: 550 × 550 mm Max. rotary table swivel range: 360° Pallet height: 750 mm Iodpfxjxywtls Aa Netb Distances Distance between spindle nose and table center: 150–1,000 mm Distance between spindle nose and table surface: 50–850 mm Feed rates Rapid traverse X, Y, Z axes: 60,000 mm/min Cutting feed (shared for X, Y, Z axes): 0.001–30 mm/min Tool Changer (ATC) Number of tools: 40 Tool size (Ø × length): Ø75 × 470 mm Tool weight: 8.0 kg Tool change time (tool to tool): 1.3 s Performance Data Positioning accuracy (X, Y, Z axes): ±0.003 mm Repeatability (X, Y, Z axes): ±0.0015 mm Pallet load capacity: 800 kg Thrust force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Floor space required: 2,750 × 5,700 mm Machine weight: 16,000 kg Motors Spindle motor (15 min rated power): 22 / 18.5 kW Hydraulic pump motor: 3.7 (4) kW Operating Hours Running time: 12,976 h Control on hours: 112,997 h

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi teknis yang baik. Pergerakan pada sumbu X: 1100 mm Pergerakan pada sumbu Y: 650 mm Pergerakan pada sumbu Z: 600 mm Kecepatan maksimum: 8000 rpm Jumlah alat dalam magazin: 40 Ukuran meja kerja: 1300 x 650 mm Inspeksi mesin dalam operasi dapat diatur berdasarkan kesepakatan. Isdex Rzy Tepfx Aa Nstb

Kondisi: baik (bekas), Tahun pembuatan: 1990, Bearbeitungszentrum mit 4 Achsen Tischmaße: 1200 x 660 mm Verfahrwege: X 1050 mm, Y 650 mm, Z 660 mm Maximale Tischbelastung: 1.600 kg Vorschubgeschwindigkeit: 15.000 mm/min Werkzeugmagazin mit 31 Plätzen, teilweise mit BT 50 Werkzeugaufnahmen bestückt 4. Achse (gesteuert): NIKKEN CNC 250, Spannfutter-Durchmesser 250 mm Abmessungen (LxBxH) ca. 3.000 x 5.000 x 2.900 mm Itedpfx Ajfbml Nsa Neb Gewicht ca. 13.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2011, 10565 Manufacturer: TOYODA Model: FH 630 SX Year of manufacture: 2011 Control type: CNC Control system: Fanuc 31i - A Location: Halberstadt Country of origin: Japan Serial No.: NS3XXXX X-axis travel: 1,000 mm Itsdpfxexvw I Ij Aa Nsb Y-axis travel: 800 mm Z-axis travel: 850 mm B-axis: 360° Distance spindle/table: 200 - 1,050 mm Max. workpiece weight: 800 kg Max. tool weight: 27 kg Max. tool length: 545 mm Max. tool diameter: Ø 120 mm Max. workpiece size (LxWxH): Ø 1,000 x 1,000 mm Tool holder: BT-50 Tool magazine with: 60 pcs. Spindle speed: 6,000 rpm Rapid traverse X/Y/Z: 60 m/min Tool-to-tool change time: 2.4 sec Machine length: 7,000 mm Machine width: 3,500 mm Machine weight approx.: 20.1 t Pallet height: 1,200 mm Positioning accuracy (X, Y, Z axes): ±0.003 mm Repeatability (X, Y, Z axes): ±0.0015 mm Pallet load capacity: 800 kg Axial force: 14,700 N Additional information: - Cutting feed (equal for X, Y, and Z axes): 0.001 - 30 m/min - Distance between spindle center and upper edge of the area: 100 mm - 900 mm - Table size range: 630 mm - Subtable positioning: 1° - Rotary table positioning: 0.001° - Used tool holders: SK 50 - Operating oil: 53 l - Slide lubrication oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37 l Machine can be inspected under power by prior arrangement.

Kondisi: baik (bekas), Tahun pembuatan: 2008, 10564 Iodpfxoxvw Izo Aa Nstb

Kondisi: bekas, Tahun pembuatan: 1973, Additional flanges and a spindle for internal grinding are included with the machine. The Jones was completely disassembled and inspected; it operates flawlessly. The price is for one machine. Itodpfjw Dvwasx Aa Neb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 8.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 640 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 680 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, laju pemakanan gandar Y: 6 m/menit, daya nominal (semu): 40 kVA, produsen pengendali: Fanuc, model controller: OiMF, beban meja: 500 kg, kecepatan rotasi (min.): 40 rpm, kecepatan rotasi (maks.): 15.000 rpm, berat keseluruhan: 11.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 22.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, panjang alat: 400 mm, tegangan masuk: 220 V, pengganti palet: otomatis, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Very well-maintained Wele HMC500 for sale. The machine was professionally inspected and dismantled by JKET/Wele factory service in week 48. The machine is securely packed, ready for collection, and can be commissioned by JKET/Wele at an additional cost. Control on: approx. 25,000 hours Machine on: approx. 25,000 hours Program run: approx. 8,500 hours Spindle on: approx. 8,500 hours Drive on: approx. 8,500 hours Axes in operation: approx. 8,500 hours Includes probing system Includes 4 SK40 tool holders (1x with probe, 3x with tools) The machine has exclusively machined aluminum. Machine is sold including: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001 degree - 2 pallet towers, each with 4 sides and 3 Lang Quick-Point lengthwise clamps per side - Chip conveyor and chip container included - Coolant tank (500 liters) and oil separator included Feed rates: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Including frequency converter Ijdpsxyuvqefx Aa Nstb 500L coolant tank Oil cooler Only aluminum was machined on this machine All manuals included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 12.976 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NSO997, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, model controller: FANUC Series 30i, kecepatan spindel (maks.): 15.000 rpm, TECHNICAL DETAILS Travel X: 750 mm Travel Z: 800 mm Travel Y: 850 mm Magazine positions: 120 Spindle Speed range: 50–15,000 rpm Spindle diameter (front bearing I.D.): 80 mm Spindle taper: ISO R297 / Taper No. 40 Tool holder: MAS I Type P40T Table Pallet size: 550 × 550 mm Max. rotary table swivel range: 360° Pallet height: 750 mm Distances Distance between spindle nose and table center: 150–1,000 mm Distance between spindle nose and table surface: 50–850 mm Feed rates Rapid traverse X, Y, Z axes: 60,000 mm/min Cutting feed (shared for X, Y, Z axes): 0.001–30 mm/min Tool Changer (ATC) Number of tools: 40 Tool size (Ø × length): Ø75 × 470 mm Tool weight: 8.0 kg Tool change time (tool to tool): 1.3 s Performance Data Positioning accuracy (X, Y, Z axes): ±0.003 mm Repeatability (X, Y, Z axes): ±0.0015 mm Pallet load capacity: 800 kg Thrust force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Floor space required: 2,750 × 5,700 mm Machine weight: 16,000 kg Iedsxqmbgepfx Aa Netb Motors Spindle motor (15 min rated power): 22 / 18.5 kW Hydraulic pump motor: 3.7 (4) kW Operating Hours Running time: 12,976 h Control on hours: 112,997 h

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 15.289 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 121, RINCIAN TEKNIS Lintasan Sumbu Lintasan sumbu X: 750 mm Lintasan sumbu Y: 800 mm Lintasan sumbu Z: 850 mm Meja Kerja (sumbu dikendalikan dengan motor sumbu AC) Ukuran palet: 550 x 550 mm Pembagian sudut terkecil: 0,001 derajat Spindel Konektor alat: #50 Daya penggerak: 30/22 kW Kecepatan putar spindel: 15.000 rpm Majalah Alat Jumlah tempat alat: 121 alat Tipe majalah: Magasin rantai Tipe: BT-50 Iodpfx Aexnwq Hoa Nstb RINCIAN MESIN Kontrol: FANUC 31i Luas area (P × L × T): sekitar 2.780 × 1.500 × 2.300 mm Jam Operasi Waktu operasi: 15.289 jam Waktu nyala kontrol: 106.856 jam PERLENGKAPAN Sistem pendingin Renishaw infrared probe OMP 60 BT 50

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, FANUC Series 18i-MB control Itjdpeuu Rzrjfx Aa Nob Table size: 1300 x 650 mm Table load: 1500 kg X travel: 1100 mm Y travel: 650 mm Z travel: 600 mm Spindle speed: 12,000 rpm Spindle taper: MAS BT40 Magazine: 32 stations Drive power: Weight: 7,200 kg Dimensions (LxWxH): 3100 x 2300 x 3100 mm Equipment and Accessories: - Chip conveyor - Coolant system - Spindle cooler - Through-spindle coolant (IKZ) - Documentation Very good condition. Machine is being sold due to closure of production.

Kondisi: bekas, Tahun pembuatan: 2007, Spindle speed: 6,000 rpm Tool holder: BT50 Number of tool changer positions: 121 Iodpst I Ec Defx Aa Njtb Control: FANUC 31iMA Horizontal Machining Center | TOYODA - FH630SX Equipped with high-pressure coolant system (IKZ) and chip conveyor. Additional equipment: + NC rotary table 360,000 x 0.001° The machine is in well-maintained condition. Technical specifications of the machine will follow shortly. --- #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Kondisi: baik (bekas), Tahun pembuatan: 2013, de Iedpfx Aertrzpsa Nstb