Beli Toyoda Fa 800 bekas (15)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 15.289 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 121, RINCIAN TEKNIS Lintasan Sumbu Lintasan sumbu X: 750 mm Lintasan sumbu Y: 800 mm Lintasan sumbu Z: 850 mm Meja Kerja (sumbu dikendalikan dengan motor sumbu AC) Ukuran palet: 550 x 550 mm Pembagian sudut terkecil: 0,001 derajat Spindel Konektor alat: #50 Daya penggerak: 30/22 kW Kecepatan putar spindel: 15.000 rpm Hfodsxnwq Hspfx Adqjn Majalah Alat Jumlah tempat alat: 121 alat Tipe majalah: Magasin rantai Tipe: BT-50 RINCIAN MESIN Kontrol: FANUC 31i Luas area (P × L × T): sekitar 2.780 × 1.500 × 2.300 mm Jam Operasi Waktu operasi: 15.289 jam Waktu nyala kontrol: 106.856 jam PERLENGKAPAN Sistem pendingin Renishaw infrared probe OMP 60 BT 50

Kondisi: baik (bekas), Tahun pembuatan: 2008, 10564 Hfodpfoxmd Ucox Adqon

Kondisi: bekas, Tahun pembuatan: 1973, Additional flanges and a spindle for internal grinding are included with the machine. The Jones was completely disassembled and inspected; it operates flawlessly. The price is for one machine. Hfedpfxow Dvwaj Adqsn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, FANUC Series 18i-MB control Table size: 1300 x 650 mm Table load: 1500 kg X travel: 1100 mm Y travel: 650 mm Z travel: 600 mm Spindle speed: 12,000 rpm Spindle taper: MAS BT40 Magazine: 32 stations Drive power: Weight: 7,200 kg Dimensions (LxWxH): 3100 x 2300 x 3100 mm Equipment and Accessories: - Chip conveyor Hfsdpfx Adjuu Rzreqon - Coolant system - Spindle cooler - Through-spindle coolant (IKZ) - Documentation Very good condition. Machine is being sold due to closure of production.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 8.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 640 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 680 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, laju pemakanan gandar Y: 6 m/menit, daya nominal (semu): 40 kVA, torsi: 200 Nm, produsen pengendali: Fanuc, model controller: OiMF, tinggi total: 3.070 mm, panjang total: 4.580 mm, lebar total: 2.720 mm, beban meja: 500 kg, kecepatan rotasi (min.): 40 rpm, kecepatan rotasi (maks.): 15.000 rpm, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 8.500 h, daya motor spindle: 22.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, panjang alat: 400 mm, berat alat: 8.000 g, tegangan masuk: 220 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Very well-maintained Wele HMC500 for sale. The machine underwent a professional inspection and disassembly by JTEKT/Wele factory service in calendar week 48. The machine is now securely packaged and ready for collection. Commissioning by JTEKT/Wele is available at an additional cost. Control powered on: approx. 25,000 hours Machine powered on: approx. 25,000 hours Program run: approx. 8,500 hours Spindle on: approx. 8,500 hours Drive on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Includes: – Probe – 4 pcs. SK40 tool holders (1x for the probe, 3x for tools) Hjdpfexnvpzsx Adqefn The machine has exclusively been used for machining aluminium. Also included with the machine: – 2 pallets with pallet changer (500 x 500 mm) – Table rotation: 0.001 degrees – 2 pallet towers, each with 4 sides and 3 longitudinal clamps per side (Lang Quick Point) – Chip conveyor and chip bin included – Coolant tank (500 litres) and oil separator included Feed rates: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Frequency converter included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, - BEKAS - PUSAT PEMESINAN HORIZONTAL 4-SUMBU DENGAN SISTEM MULTI-PALET PERGERAKAN SUMBU X: 1000 mm PERGERAKAN SUMBU Y: 850 mm Hsdpeq Drw Ejfx Adqofn PERGERAKAN SUMBU Z: 750 mm JARAK HIDUNG SPINDEL-MEJA: 50 - 900 mm GERAK CEPAT X-Y-Z: 30 m/menit SPINDEL: 15000 rpm; 30 kW; ISO 50 - BT PALET: INDEKSASI; JUMLAH: 15; 630x630 mm COOLANT TEKANAN TINGGI: 70 Bar MAGAZINE TOOL: TIPE RANTAI; 225 POSISI DIAMETER MAKSIMAL ALAT: 120 mm PANJANG MAKSIMAL ALAT: 500 mm BERAT MAKSIMAL ALAT: 27 kg UNIT KONTROL: FANUC 16i-M AKSESORIS: KONVEYOR SERBUK; PENGUKUR ALAT; TOUCH PROBE

Kondisi: baik (bekas), Tahun pembuatan: 2013, de Hfedpfertrzpox Adqjn

Kondisi: baik (bekas), Tahun pembuatan: 2011, 10565 Manufacturer: TOYODA Model: FH 630 SX Year of manufacture: 2011 Control type: CNC Control system: Fanuc 31i - A Location: Halberstadt Country of origin: Japan Serial No.: NS3XXXX X-axis travel: 1,000 mm Y-axis travel: 800 mm Hsdpfx Adjxc Tukoqsfn Z-axis travel: 850 mm B-axis: 360° Distance spindle/table: 200 - 1,050 mm Max. workpiece weight: 800 kg Max. tool weight: 27 kg Max. tool length: 545 mm Max. tool diameter: Ø 120 mm Max. workpiece size (LxWxH): Ø 1,000 x 1,000 mm Tool holder: BT-50 Tool magazine with: 60 pcs. Spindle speed: 6,000 rpm Rapid traverse X/Y/Z: 60 m/min Tool-to-tool change time: 2.4 sec Machine length: 7,000 mm Machine width: 3,500 mm Machine weight approx.: 20.1 t Pallet height: 1,200 mm Positioning accuracy (X, Y, Z axes): ±0.003 mm Repeatability (X, Y, Z axes): ±0.0015 mm Pallet load capacity: 800 kg Axial force: 14,700 N Additional information: - Cutting feed (equal for X, Y, and Z axes): 0.001 - 30 m/min - Distance between spindle center and upper edge of the area: 100 mm - 900 mm - Table size range: 630 mm - Subtable positioning: 1° - Rotary table positioning: 0.001° - Used tool holders: SK 50 - Operating oil: 53 l - Slide lubrication oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37 l Machine can be inspected under power by prior arrangement.

Kondisi: bekas, Tahun pembuatan: 2015, Perlengkapan: konveyor serpihan, Vertical Machining Center Wele (Toyoda) FV1165 Basic machine equipment: - FANUC 0iM CNC control with 10.4" LCD color screen - AC digital FANUC main spindle and axis motors - Tool holder DIN 69871 A40 - Spindle speed range 50 - 8,000 rpm, two-stage gearbox - Spindle drive power 18.5/15 kW - Travel X-axis: 1,100 mm - Travel Y-axis: 650 mm - Travel Z-axis: 600 mm - Table size: 1,300 x 650 mm - Rapid traverse X / Y-axis: 30 m/min Hfsdpfxow Smdxe Adqsn - Rapid traverse Z-axis: 24 m/min - Double-supported, preloaded ball screw drives in X / Y / Z axes - Through-spindle coolant, type A - Additional coolant tank with two switchable filter cartridges and a high-pressure pump, 20 bar - Number of tool magazine positions: 40 - Tool change time: 3 sec. (double gripper) - Cast iron construction - Oversized box guideways in X / Y / Z axes - Fully enclosed work area with work area light - Chip conveyor parallel to the X-axis - 3-color signal light (red/yellow/green) - 1 set of machine documentation - CE specification - In TOYODA silver/grey paint - Manual Guide i Space requirements approx. 3,200 x 2,240 x 2,940 mm Machine weight approx. 7.2 t - Air blast through the spindle in addition to internal coolant supply, controlled via a separate M-function Errors in the technical data excepted. The scope of accessories applies exclusively and within the framework of the written article description. There is no entitlement whatsoever to any other accessories shown, for example for illustrative purposes. Machine is sold without warranty, without guarantee. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Kondisi: bekas, Tahun pembuatan: 2007, Spindle speed: 6,000 rpm Tool holder: BT50 Number of tool changer positions: 121 Control: FANUC 31iMA Horizontal Machining Center | TOYODA - FH630SX Equipped with high-pressure coolant system (IKZ) and chip conveyor. Hfedpfxot I Ec Do Adqen Additional equipment: + NC rotary table 360,000 x 0.001° The machine is in well-maintained condition. Technical specifications of the machine will follow shortly. --- #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Horizontal machining center TOYODA FH 550 S Year: 2005 Control: FANUC Series 30i Technical specifications: X-axis travel: 750 mm Z-axis travel: 800 mm Y-axis travel: 850 mm Main spindle: 15,000 rpm, 22/30 kW Rotary table: 0.0001° 120-position tool magazine Hodpowr Akvofx Adqsfn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, de-2011 (Inbetriebnahme 2015) Tisch - Größenbereich: 630 mm - Positionierung des Untertisches: 1° - Positionierung des Rundtisches: 0,001° - Palettenhöhe: 1200 mm Verfahrwege - X-Achse: 1000 mm - Y-Achse: 800 mm - Z-Achse: 850 mm - Abstand Spindelmitte zu Tischoberfläche: 200 mm – 1050 mm - Abstand Spindelmitte zu Oberkante Verfahrweg: 100 mm – 900 mm Vorschub - Eilgang (X-, Y- und Z-Achse): 60 m/min - Arbeitsvorschub (X-, Y- und Z-Achse): 0,001 – 30 m/min Spindel - Spindeldrehzahl: min. 14.000 U/min / 35 Werkzeugwechsler (ATC) - Werkzeugplätze: 60 Stk. - Werkzeugwechselzeit (Werkzeug zu Werkzeug): 2,4 s Hsdpfxenmx Tpo Adqsfn - Verwendete Werkzeuge: SK 50 / Aufnahme Zapfen BT Kapazitäten - Betriebsöl: 53 l - Führungsbahn-/Spindelkopf-Schmieröl: 3,0 l - Kühlmittel für Spindel & Kugelrollspindel: 37 l Services / Leistungen - Positioniergenauigkeit (X-, Y- und Z-Achsen): ± 0,003 mm - Wiederholgenauigkeit (X-, Y- und Z-Achsen): ± 0,0015 mm - Paletten-Nutzlast: 800 kg - Axiale Belastbarkeit: 14.700 N

Kondisi: baik (bekas), Tahun pembuatan: 1990, Bearbeitungszentrum mit 4 Achsen Tischmaße: 1200 x 660 mm Verfahrwege: X 1050 mm, Y 650 mm, Z 660 mm Maximale Tischbelastung: 1.600 kg Vorschubgeschwindigkeit: 15.000 mm/min Werkzeugmagazin mit 31 Plätzen, teilweise mit BT 50 Werkzeugaufnahmen bestückt 4. Achse (gesteuert): NIKKEN CNC 250, Spannfutter-Durchmesser 250 mm Hfodpfefbml Nex Adqen Abmessungen (LxBxH) ca. 3.000 x 5.000 x 2.900 mm Gewicht ca. 13.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, daya nominal (semu): 69 kVA, torsi: 323 Nm, produsen pengendali: FANUC, model controller: 31i, tinggi benda kerja (maks.): 1.000 mm, diameter benda kerja (maks.): 850 mm, tinggi total: 3.000 mm, panjang total: 3.120 mm, lebar total: 5.447 mm, lebar meja: 550 mm, panjang meja: 550 mm, beban meja: 800 kg, kecepatan rotasi (maks.): 40 rpm, berat keseluruhan: 16.000 kg, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 10.000 h, pasokan pendingin: 70 batang, daya motor spindle: 22.000 W, hidung spindel: BT-50, jumlah slot dalam magazin alat: 120, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, konveyor serpihan, KNOLL chip conveyor belt KNOLL 1000-liter lubrication unit High pressure 70 bar 5 pressure levels 15,000 rpm BIG PLUS spindle Hfedpfx Adswyzuveqon Measuring scales on X, Y & Z axes 120-tool magazine BT50 Tool breakage detection Continuous B axis (4th axis) RENISHAW MP60 probing function

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 10.580 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 600 mm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 7.600 kg, TECHNICAL DETAILS Hfedpou Hkl Ajfx Adqsn Manufacturer: TOYODA Model: FV 1365 Year of manufacture: 2009 Control system: Heidenhain iTNC 630 Machine weight: approx. 7,600 kg Travel paths X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 600 mm Spindle Speed range: 12,000 rpm Tool holder: HSK A63 Coolant supply Internal coolant supply: 20 bar Tool magazine Number of tools: 40 positions Space requirements Dimensions (L x W x H): 4,738 x 2,990 x 2,940 mm