Beli Soraluce Fs 8000 bekas (41)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.300 mm, jarak gerak sumbu Z: 1.500 mm, translation-1 Iedpfx Asxc Emxeb Ija

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 6.500 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 1.300 mm, panjang pemakanan sumbu X: 10.000 mm, panjang umpan sumbu Y: 10.000 mm, panjang umpan sumbu Z: 10.000 mm, gerak cepat sumbu X: 35 m/menit, pergeseran cepat sumbu Y: 35 m/menit, pergerakan cepat sumbu Z: 35 m/menit, kecepatan spindel (maks.): 7.000 rpm, kecepatan spindel (min.): 20 rpm, panjang meja: 8.000 mm, lebar meja: 1.100 mm, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Year of manufacture: 2016 Travels / Motion ranges: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: 7 units Width of T-slots: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 43 kW at 100% duty cycle Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axes: 2 – 10,000 mm/min Max. Rapid traverse: X, Y, and Z axes: 35,000 mm/min Base area SLP8000 (without enclosure): 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, diagonal H207 Adapter - Angular milling head SK50 with Hirth gearing Automatic tool changer with 60 magazine positions Iodpfxexvx Amo Ab Isa Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line undergo a strict selection process and a comprehensive inspection (deep-dive check) by us. After thorough cleaning, any identified obvious defects and faults are professionally repaired by our expert service team.

Kondisi: bekas, Tahun pembuatan: 1998, Travel path - X-axis: 5,000 mm Travel path - Y-axis: 2,800 mm Travel path - Z-axis: 1,500 mm Control system: HEIDENHAIN TNC426CB Spindle speed: 20 - 3,000 rpm Table length: 4,000 mm Table width: 2,000 mm Max. table load: 20,000 kg Tool holder: ISO SK50 Number of tool changer positions: 100 Dimensions (L x W x H): 9,800 x 6,200 x 7,100 mm Machine weight: approx. 31,600 kg Gantry milling machine | SORALUCE FS-5,000 The machine is in very well-maintained condition. We will be happy to provide you with a video of the machine at its factory location upon request. Iedpexrvl Dsfx Ab Ija Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FS 5.000 | FS5.000 | FS 5000 | FS5000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.100 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, kecepatan spindel (maks.): 4.000 rpm, panjang meja: 8.000 mm, lebar meja: 2.500 mm, beban meja: 15.000 kg, Chain-type tool changer with 80 positions Rotary table 1500 x 1500 mm with V-axis 1500 mm Table load capacity: 15,000 kg Optional box table: 3500 x 1000 x 1000 mm Electrically powered X-axis travel: 8000 mm Y-axis travel: 3100 mm Z-axis travel: 1600 mm Table length: 8000 mm Table width: 2500 mm Table load capacity: 15,000 kg Spindle power: 43 kW Spindle speed: 4000 RPM Tool holder: 50 ISO/BT/MK Feed rate X-axis: 25,000 mm/min Feed rate Y-axis: 25,000 mm/min Ijdpsxm Sudjfx Ab Ija Feed rate Z-axis: 25,000 mm/min CNC control: iTNC530 Milling head auto-indexing: 2.5 x 2.5° Length: 14,000 mm Width: 6,000 mm Height: 6,000 mm Weight: 68,000 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, sourced from the manufacturer. The details are given in good faith but accuracy cannot be guaranteed. Therefore, they do not constitute representation or contractual terms. We recommend verifying all critical information.

Kondisi: baru, Tahun pembuatan: 2023, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 4.000 mm, jarak gerak sumbu Z: 1.600 mm, Kontrol Heidenhain- / Siemens Motor Inline berpendingin air 43 kW / 900 Nm Ijdpfx Asqy Hkaob Ija Lintasan sumbu: X= 16.000 Y= 4.000 Z= 1.600 Kepala frais: 2,5°x2,5° / 1°x1° / 0,001°x0,001 / pinole Fitur tambahan: Penukar alat 40 / 60 / 80 / 100 Meja NC Meja pelat Meja putar karusel Konveyor serpihan Sistem pergantian kepala frais otomatis penuh Pemrosesan ayunan (pendular machining) Pelindung semprotan Paket teknologi pendukung operator

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, 1 nearly-new CNC travelling column bed milling machine Manufacturer: Soraluce Ijdpfx Ajwzx Ntjb Iea Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical Data: Travel X-Y-Z: 8000 x 1300 x 1800 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed range: up to 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Fully enclosed guarding Complete coolant system Electronic handwheel IKZ (internal coolant supply) Turning clamp Rotary carousel table D=1600 mm: 250 rpm Table field 6000 x 2000 mm Planer slide, etc.

Kondisi: siap digunakan (bekas), tinggi total: 3.850 mm, lebar total: 4.190 mm, panjang total: 11.300 mm, produsen pengendali: Heidenhain, berat kosong: 22.000 kg, Kepala frais CNC indexing (2,5°) Pengangkut serpihan termasuk Opsional: mesin dapat dilengkapi dengan kontrol Heidenhain 320 baru Perjalanan longitudinal sumbu X: 6500 mm Perjalanan lintas sumbu Y: 1600 mm Perjalanan sumbu Z (tinggi): 900 mm Dimensi area penjepitan - meja: 8000 x 800 mm Ijdpfoxpgfvsx Ab Ioa Daya pada spindle: 22/26 kW Konektor spindle kepala frais (ISO): ISO 50 Rentang kecepatan maks.: 20 > 3000 rpm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Gerak longitudinal: 8000 mm Gerak melintang: 1300 mm Gerak vertikal: 2100 mm Iedjxwlrqepfx Ab Ija Pelat dasar: 9000x2000x300 mm Kepala frais otomatis: 2,5°/2,5° 910 Nm Kecepatan spindle: 20–4000 rpm Taper spindle: ISO50 Feed/gerak cepat: 10/25 m/menit ATC: 60 posisi Catu daya: 52 kVA/94 A Motor spindle: 32 kW Panjang: 19950 mm Lebar: 7140 mm Tinggi: 4770 mm Meja indeks: 1200x1200 mm, 5 ton, 0,001° Kepala sudut indeks otomatis: 2,5°/2,5° Udara/air melalui spindle via M-code Pendingin: 5/20 bar 50 l/menit Renishaw RMP 60 Sistem pengukur Heidenhain X-Y-Z Kompensasi suhu elektrik Kontrol manual Perangkat lunak untuk kerja 2 zona

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Soraluce Modell FL8000 Hochleistungs-Wanderständer, bodengeführte CNC-Fräsmaschine Verfahrwege (X) 7.500 mm Verfahrwege (Y) 1.400 mm Verfahrwege (Z) 1.000 mm Eilgang (X,Y,Z) 25.000 mm/min Arbeitsvorschubbereich (X,Y,Z) 1 – 10.000 mm/min Ijdpfsw U Tlzsx Ab Ioa Beschleunigungsrate (sofort, nicht maximal) 1 m/s² Spindeldrehzahl 20 - 4.000 U/min Spindelaufnahme ISO 50 Spindelleistung 28 kW NC15C – HEIDENHAIN iTNC 530 (Flacher 15,1" TFT-Monitor mit digitalen Antrieben). Einprozessor-Ausführung. Für Maschine mit 10 Motoren vorbereitet (9 CNC-Achsen + Spindelmotor). Hauptbedienfeld mit einzeln angesteuerten Drucktastern für die Linearachsen (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC-Option für die i530M. Unabhängiger AC. HEIDENHAIN Digitalantriebs-Servomotor für jede Achse HEIDENHAIN HR-410 portables elektronisches Handrad mit 5 m Spiral-Kabel Automatischer Teilkopf 28 kW, 760 Nm, 0,001° x 0,001°, 4.000 U/min. Kontinuierliche Luft- und Öl-Nebelschmierung der Kopf-Zahnräder. Automatische Werkzeugklemmvorrichtung – 15.000 N. Automatische hydraulische Werkzeugauslösung. Spindelaufnahme: BT50 Hochdrehmoment-Spindelmotor 28 kW, 100 % ED, Digitalmotor. R10 – ZF-Getriebe, zweistufig mit Kühleinheit Spindeldrehzahlbereich 20 – 4.000 U/min Eilgang X-Y-Z-Achsen 25.000 mm/min Arbeitsvorschubbereich X-Y-Z-Achsen 0 – 10.000 mm/min Beschleunigungsrate X-Y-Z-Achsen 1 m/s² (sofort, nicht maximal) Hydraulischer Gewichtsausgleich für Kopf-/Rammeinheit X-Achsen-Antriebssystem mit zwei Servomotoren, zwei Getrieben und Doppel-Zahnstange Vorgespannt Kugelumlaufspindeln mit Doppelumlaufmutter in Y- und Z-Achsen. Automatische Zentralschmierung. Linearführungssystem mit umlaufenden Zylinderrollen in jeder Achse. Automatische Zentralschmierung der Führungen. HEIDENHAIN-Linearmaßstäbe in X-Y-Z-Achsen mit Druckluft-Abreinigung – (Genauigkeit +/- 0,005 mm) H48 – IKZ-Kühlung durch die Spindel Typ AD M3 – Automatischer Werkzeugwechsler mit 40 Stationen M6 – Horizontal-Vertikal-Werkzeugwechsel M8 – Motorbetriebene Werkzeugwechselvorrichtung, Werkzeugwechsler servomotorisch angetrieben Hydraulikaggregat Vordere Metall-Lamellenabdeckung für den oberen und unteren Rammbereich sowie Metallschutz an beiden Seitenteilen der Säule zwischen Maschinentisch und hinterem Führungsbahnträger, als Schutz für die vertikale Bewegung der Ramme. CE10 – Rück- und Seitenverkleidung der Säule P20 – Bedienerplattform an der Säule angebracht, fährt in X-Richtung mit. Das Hauptbedienpanel befindet sich im Bereich der Plattform (für Maschinen ohne Bedienpult) und ist von hinten zugänglich. D7 + D50A – Kühlsystem mit 1.000L Tank und zwei Pumpen, für Hoch- und Niederdruck, 5 & 12 bar, 50L/min Durchfluss. Papier- und Magnetfilter. E30A – Späneförderer FL8000, Scharnierband, Breite 350 mm PW11B – Pendelarbeitsraumsystem PM2 x 2 – Vorbereitung für zwei Rundtische durch Soraluce Arbeitsraumbeleuchtung Schaltschrankkühlung Schaltschrankbeleuchtung Arbeitsweise: gemäß CE-Sicherheitsrichtlinien Filter zur Gewährleistung der elektromagnetischen Verträglichkeit Seitenschutz der Säule mit Sicherheitskontakten Befestigungsbolzen Standardfarbe: Blau RAL 5005 / Grau RAL 7035 K19 – Zwei Maschinendokumentationen (je eine in Papierform und auf CD-ROM) Grundplatte 8.000 x 1.500 x 300 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, siemens-840d-specs-2024 Isdew Syv Ujpfx Ab Isa

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Gebrauchte Soraluce SP 8000 Fahrständer-CNC-Bettfräsmaschine mit 2,5° automatischem Universalfräskopf, 40-fach automatischem Werkzeugwechsler und Heidenhain 426 CB Steuerung. Seriennummer: 108540. BAUJAHR: 1998. TISCHLÄNGE 8.000 MM TISCHBREITE 1.100 MM Fahrweg X (Säule horizontal) 6.500 MM Fahrweg Y (Kopf vertikal) 1.600 MM Fahrweg Z (Pinole quer) 1.200 MM SPINDELAUFNAHME BT50 Isdpfx Abjwgd Rgs Ija SPINDELDREHZAHLEN 20 – 2.000 U/min SPINDELMOTOR 22 kW VORSCHUBGESCHWINDIGKEITEN 5 – 5.000 MM/min EILGANG 15.000 MM/min AUTOMATISCHER WERKZEUGWECHSLER 40 Plätze STROMANSCHLUSS 415 V, 3Ph, 50Hz AUSSTATTUNG UND MERKMALE Einrichtung für Horizontal-/Vertikalwerkzeugwechsel, Bedienerplattform, Kopf für Innenkühlung vorbereitet, Varilock R80, Kühlsystem mit 350-Liter-Tank und 3 bzw. 8 bar, 50 L/min Förderleistung, Elektronisches Handrad, Schiebespritzschutzsystem, Heidenhain Linearmaßstäbe, Kugelumlauf-Führungssystem. Eimeldingen Dreh-/Rundtisch, Durchmesser 2.000 mm, integriert, mit zusätzlichen Stirntischverlängerungen 5.000 mm x 1.600 mm. ABMESSUNGEN LÄNGE 10.250 MM BREITE (ohne Zusatzbetten) 4.455 MM HÖHE 3.800 MM GEWICHT 28.000 KG

Kondisi: baik (bekas), Tahun pembuatan: 2016, EN10569 Isdpfsxxpb Ejx Ab Isa

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.200 mm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, kecepatan pemakanan sumbu X: 12 m/menit, laju pemakanan gandar Y: 12 m/menit, laju pemakanan sumbu Z: 12 m/menit, kecepatan spindel (maks.): 3.000 rpm, lebar meja: 1.200 mm, diameter pemasangan: 50 mm, daya: 0,028 kW (0,04 hp), RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of manufacture: 2002 Capacities / Travel: Longitudinal (X): mm 2,500 Vertical (Y): mm 1,600 Cross (Z): mm 1,200 Table size: Length: mm 2,860 Width: mm 1,200 Paintwork: RAL 5005 and RAL 7035 Tool holder: ISO 50, DIN 69871 Form AD Main drive: Drive power: 28 kW Spindle speed range: Spindle speed: rpm 20-3,000 Full power from: rpm 250 Feed rates: X, Y, and Z axes mm/min 2 – 12,000 Iodpfx Aerp H D Tjb Ija Max. rapid traverse speed: X, Y, and Z axes mm/min 15,000 Weight: kg 22,200 Heidenhain 426 Heidenhain CNC control 426M with digital drive technology, Electronic handwheel HR 410 Automatic milling head, Diagonal H26 Automatically indexing Soraluce “Diagonal” milling head, type H26, incl. long spindle for internal coolant supply. 2.5° indexing in both joints and speeds up to 3,000 rpm. Clamping via Hirth coupling in both joints. Repeat accuracy +/-3 arc sec or 0.002 mm. Bearings: FAG spindle bearings with steel balls. Includes pneumatic locking. 3D thermal expansion compensation Automatic tool changer: Number of magazine stations: 40 Chip conveyor Coolant lubrication system Tank capacity 500 l + 150 l, delivery rate 40 l/min, delivery pressure 3/8 bar (2 pumps) with outlet via spray ring and internally cooled tools DIN 69871 Form AD Complete enclosure RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured through a rigorous selection process and subjected to a thorough (deep-dive) inspection. After intensive cleaning, all identified obvious defects and faults were professionally repaired by our specialist service team.

Kondisi: bekas, Tahun pembuatan: 2009, x-Weg 3.500 mm y-Weg 1.200 mm z-Weg 1.250 mm Steuerung HEIDENHAIN TNC-530 Tischgröße 1.250 x 1.250 mm Iedsxwzf Hepfx Ab Isa Tischbelastung 4.000 Kg Arbeitsvorschub 12.000 mm/min Drehzahl 4.000 rpm Antriebsleistung 24 kW Aufnahme ISO 50 DIN 69871 AD Spindelkopf Automatisch 2,5 x 2,5 Grad Handrad Heidenhain HR-410 innere Kühlmittelzufuhr 20 bar Gesamtleistungsbedarf 46 kW Maschinengewicht ca. 18.000 kg Raumbedarf ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung -500-l-Tank mit Magnetabscheider-Papierfilter Teilüberholt unter Strom zu besichtigen

Kondisi: bekas, Tahun pembuatan: 2021, produsen pengendali: Heidenhain, model controller: TNC 640, 001 Ijdexv Nknopfx Ab Isa

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Iodpfjxwdygex Ab Ija Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: X-axis travel: 30,000 mm y-axis travel: 3,600 mm z-axis travel: 1,900 mm Milling spindle speed range: 1 - 4,000 rpm Spindle taper ISO: 50 Feed rate: 1 - 10,000 mm/min Rapid traverse: 25 m/min Milling spindle motor: 46 kW Total power requirement: 85 kW Space requirements approx.: 45 x 8.7 x 5.5 m (L x W x H, above floor) Equipped with CNC HEIDENHAIN iTNC 530 Automatic milling head indexing, 2.5° Table size: 31,000 x 2,500 mm (4 plates 6,000 x 2,500 mm + 1 plate 7,000 x 2,500 mm) 2 chip conveyors, coolant system Iedpfx Aevmziheb Ioa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 11.200 h, Fungsionalitas: berfungsi sepenuhnya, daya motor spindle: 28 W, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, gerak cepat sumbu X: 25 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, jenis arus masuk: tiga fasa, torsi: 479 Nm, berat benda kerja (maks.): 5.700 kg, tinggi total: 3.155 mm, panjang total: 6.760 mm, lebar total: 4.060 mm, berat keseluruhan: 15.500 kg, panjang alat: 250 mm, Perlengkapan: dokumentasi / manual, Mesin Frais Soraluce TAA25 tahun 2014, CNC HEIDENHAIN TNC530 2024: Penggantian unit hidrolik dan retrofit kepala + spindle secara keseluruhan. Perjalanan X/Y/Z [mm]: 2.500 x 1.000 x 1.000 Meja [mm]: 2.700 x 850 Indeksasi kepala [°]: 2,5 x 2,5 Kecepatan spindle [rpm]: 4.000 Daya dan torsi [kW - Nm] S1: 28 - 479 Iedoxwna Rspfx Ab Ioa Majalah alat: 20 - ISO 50

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, gerak cepat sumbu X: 25.000 m/menit, pergeseran cepat sumbu Y: 25.000 m/menit, tahun perombakan terakhir: 2025, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Technical specifications of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel distances: X-axis (mm): 2,500 Y-axis (mm): 1,250 Z-axis (mm): 1,000 Rotary table size: Length (mm): 1,000 Width (mm): 1,000 Spindle speed range (rpm): 15,000 Feed rates X, Y & Z axes (mm/min): 10 – 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Isdpfx Absv Rw Uus Ija Tool holder: HSK 63 A Main spindle drive power (100% duty cycle): 25 kW - Chip conveyor - Coolant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA linear guideway system RUE 45 on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us through a strict selection process and subjected to a thorough examination (deep-dive check). Following intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 2.000 mm, kecepatan spindel (maks.): 4.000 rpm, CNC SELCA 4045 JARAK GERAK Jarak gerak memanjang: 6.000 mm Jarak gerak vertikal: 2.000 mm Jarak gerak melintang RAM: 1.200 mm SPINDLE Daya motor: 30 kW Kepala spindle: DIN 69871-B ISO50 Putaran: 4.000 rpm PEMAKANAN DAN GERAK CEPAT Kecepatan pemakanan kerja maksimum: 5.000 mm/menit Gerak cepat: 15.000 mm/menit Ijdextqqdspfx Ab Isa Daya dorong maksimum sumbu pada alat potong: 11.000 N

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, DE Iedpjr Hr Arsfx Ab Isa

Kondisi: bekas, Tahun pembuatan: 2008, Technical Details: X-axis travel: 6500 mm y-axis travel: 1400 mm z-axis travel: 1000 mm Table size: 7000 x 1100 mm Spindle speed range: 15 - 4000 rpm Spindle taper: ISO 50 Rapid traverse: 20 m/min Feed rate: 1 - 10000 mm/min Total power requirement: 75 kW Machine weight approx.: 30 t Equipped with SIEMENS 840 D CNC Automatic indexing milling head, 0.001 x 0.001° increments Automatic 100-position tool changer ICS 30 bar coolant system Ijdsvmz I Repfx Ab Ioa Chip conveyor

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.200 mm, gerak cepat sumbu X: 25 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 20 rpm, lebar meja: 850 mm, beban meja: 5.000 kg, panjang meja: 2.700 mm, berat keseluruhan: 15.500 kg, tahun perombakan terakhir: 2024, RefurbishmentPLUS by Dornhöfer The Difference. Including Installation & Commissioning! MAIN TECHNICAL DATA Year of Manufacture: 2007 Capacities / Travel Range: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Transverse (Z): 1,200 mm Table Dimensions: Length: 2,700 mm Width: 850 mm Number of T-slots on Table Surface: 6 Width of T-slots: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. Table Load: 5 t/m² Paintwork: RAL 5011 (steel blue) and RAL 7035 (light grey) Tool Interface: ISO 50, DIN 69871 AD Pull Stud: DIN 69872 Type A Main Drive: Drive Power: 100% duty cycle, 24 kW Spindle Speed Range: Spindle Speed: 20–4,000 rpm Torque: 479 Nm Feed Rates: X, Y, and Z axes: 10–10,000 mm/min Max. Rapid Traverse Speed: X, Y, and Z axes: 25,000 mm/min Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic Milling Head, Diagonal H200 Chip Conveyor Coolant System STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3 m coiled cable - Hydraulic weight compensation acting directly on vertical slide - 3D thermal expansion compensation for Heidenhain CNC path controls - Complete splash guard with two front doors and one rear door, enabling machine operation from both front and rear. All doors fitted with viewing windows - Heidenhain AC servo motors on all axes with diagonal drive technology - INA RUE 45 linear roller guideway system on all axes with central lubrication - Ball screws (IT5) on all axes Iedoun Nnqspfx Ab Ioa - Direct linear measuring system by Heidenhain on all axes - Telescopic covers for X-axis guideways - Automatic cycle lubrication for all axes and moving components - Work area lighting Refurbishment+ – What does that mean? The RefurbishmentPLUS line provides you with a machine that has been technically and visually restored to its original delivery condition without compromise. All assemblies have been completely dismantled, repainted, and reassembled using new original spare parts. Cables, hydraulics, guideways, spindles, rolling bearings – all new!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 3.200 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 15.000 m/menit, pergeseran cepat sumbu Y: 15.000 m/menit, pergerakan cepat sumbu Z: 15.000 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 20 rpm, 100%Retrofit by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2002 Control system: Heidenhain TNC 640 / TNC 7 Travel paths: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range (rpm): 20 – 4,000 Feed rates X, Y & Z axis (mm/min): 2 - 12,000 Max. rapid traverse speed X, Y & Z axis (mm/min): 15,000 Milling head: Automatic orthogonal milling head H10, 1° increment Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle, 37 kW - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & internal coolant supply (ICS) - Chip conveyor with floor discharge - Ergonomic operator platform - Safety guarding for hazardous zones - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We deliver the machine bed in the length you require, up to a maximum of 16,000 mm. 100%RetroFIT – our core business! For us, this means offering a machine that is truly comparable only to a new product, while also offering you numerous additional advantages: - Latest CNC control technology combined with proven machine stability Iedpfx Abev S Upfe Isa - Significant CO₂ savings compared to a new machine - Shorter delivery times - Often savings on complex foundation work - Significantly lower investment costs All mechanical components (e.g., ball screws, guides, roller bearings, etc.) have been replaced. Our engineers designed the complete electrical peripherals based on the most efficient technologies available (including the latest drive, control, and regulation technologies). Implementation includes new cabling, a completely new switch cabinet, and the latest Heidenhain control system with numerous innovative options. The entirely new and innovative hydraulic design meets the latest standards and achieves maximum efficiency. Through our refurbishment process, the machine matches the appearance of a new machine: The entire unit is completely disassembled down to every screw, ground, primed, and then finished with a durable 2K-EP coating. We have equipped the machine with a safety concept individually tailored to the operator’s needs, offering the highest level of safety, flexibility, and ergonomics. You receive a cutting-edge machine built to the latest standards, combined with substantial CO₂ savings.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 20 rpm, lebar meja: 850 mm, panjang meja: 3.700 mm, berat keseluruhan: 18.500 kg, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of manufacture: 2007 Travels / Axis movement: Longitudinal (X): mm 3,500 Vertical (Y): mm 1,250 Cross (Z): mm 1,000 Table size: Length: mm 3,700 Width: mm 850 T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle, 24 kW Spindle speed range: Spindle speed: min-1 20–3,000 Torque: Nm 479 Max. feed rate: X, Y and Z axes, mm/min 25,000 Mean acceleration: m/s² 2 Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Rotary control pendant including Heidenhain iTNC 530 controller (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatically indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic Tool Changer: Automatic tool changer (random-access turret) with 20 tool magazine positions: Automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip Conveyor Package: Three chip conveyors: two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, ejection height: 1,000 mm Coolant System 2: Coolant lubrication system 2 with ring nozzle outlet and internal coolant supply compliant with DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of the high-pressure pump (from 15 bar). RepairFIT is our proven solution for a profitable entry into our product portfolio. Isdpoxgn Efofx Ab Iea The machines available in this product line are sourced through a strict selection process and undergo a thorough inspection (Deep-Dive-Check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.