Beli Tabung Mandrel Benders bekas (1.334)

Kondisi: bekas, Tahun pembuatan: 2001, Technical Details: Tube diameter: 74 mm Wall thickness: 5 mm Tube diameter min.: 10 mm Tube diameter max.: 74 mm Round material: Steel max.: 40 mm Control: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max: 300 / min: 65 mm Maximum bending angle: max: 195° / min: 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube feed length: 3000 mm Hydraulic working pressure: max. operating pressure: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions approx. LxWxH: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine featuring a bending head and pivoting arm (cold bending machine). Fields of application: exclusively for processing tubes, round bars, and wires made of steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level adjustment: vertical travel = 300 mm (vert. position freely programmable) and max. horizontal movement 350 mm Credpsu Ibvhjfx Ad Doh - Bending dies of different sizes within a die stack can be approached as required. Bending direction is to the right. Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic power unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec. and max. acceleration 1100 mm/sec.) ID. *

Kondisi: baik (bekas), Tahun pembuatan: 1994, jenis kontrol: Kontrol CNC, produsen pengendali: Siemens, model controller: 840 D, diameter pipa: 168 mm, sudut pembengkokan: 190 °, radius tekuk (min.): 80 mm, radius tekuk: 700 mm, berat keseluruhan: 32.000 kg, lebar total: 2.700 mm, tinggi total: 2.450 mm, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle: +/- 190° Dimensions (LxWxH): 11.9 x 2.7 x 2.45 m Approx. machine weight: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are included: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Crodpfoxgqh Nox Ad Djh Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm There were a few mandrels with direct engravings, which had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outside diameters have been measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has a value of approximately €150,000.

Kondisi: bekas, Tahun pembuatan: 1991, Pipe diameter: 6 - 18 mm Maximum bending angle: 180° Mandrel length: 1500 mm Crsdpfx Ajv T Nq Hsd Deh Machine weight: approx. 0.55 t Space requirement: approx. 1.6 x 0.8 x 1.2 m Electro-hydraulic mandrel tube bending machine with - 4 bending angle memory settings - Digital display - Tube bending tools for 20.2 mm, 25.5 mm, 30.2 mm, and 38.2 mm.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, nomor mesin/kendaraan: 7385, jenis kontrol: hidrolik, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Transfluid, model controller: IPU 20, diameter pipa: 648 mm, panjang pipa: 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, sudut pembengkokan: 180 °, radius tekuk (min.): 50 mm, radius tekuk: 125 mm, panjang pembengkokan: 6.000 mm, panjang garpu: 5.500 mm, jumlah sumbu: 3, tinggi kerja: 1.300 mm, panjang meja: 7.000 mm, lebar meja: 900 mm, tinggi meja: 1.300 mm, berat keseluruhan: 1.000 kg, panjang total: 7.000 mm, lebar total: 900 mm, tinggi total: 1.300 mm, daya: 5 kW (6,80 hp), tegangan masuk: 400 V, arus masuk: 25 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tekanan kerja: 200 batang, kapasitas tangki oli: 1.320 l, Perlengkapan: dokumentasi / manual, henti darurat, Perangkat lunak pembengkokan memerlukan pembaruan baru. Mandrel pembengkok tersedia, alat pembengkok tidak termasuk. Credsxcxupspfx Ad Deh

Kondisi: baik (bekas), Mandrel tube bending machine, manufacturer LANG, type EL 45 Technical specifications: - For tube diameter: 45 x 2 mm - Mandrel holder length: 2,000 mm - Bending speed for 90°: approx. 3 s - Electrical connection: 380 V, 2.2 kW - Weight: approx. 1,000 kg - Including tooling: - 16 x R 76 - 22 x R 76 - 28 x R 75 - 35 x R 105 Codsqff E Eepfx Ad Derh

Kondisi: baru, Tahun pembuatan: 2024, diameter pipa: 76 mm, daya: 3 kW (4,08 hp), masa garansi: 12 bulan, COUNTRY OF ORIGIN: TURKEY Codpjvkubljfx Ad Dsrh WARRANTY PERIOD: 12 MONTHS Standard Equipment - Self-memory NC Control Screen enables professional and easy operation of the machine - Allows pipe bending up to Ø 76mm x 3 mm - Clamp device supports the pipe during securing to the machine - Spare holes for mounting special tools - Steel welded construction frame - Thermal – Power & Reset indicator lights - Emergency stop button - Machine has internal memory for up to 500 programs - Minimum bending radius is 2 times the pipe's diameter (Ø) (varies based on pipe wall thickness and material) - Ø 33.7 mm Standard 1 set pipe die included - User manual MODEL: NBM 76 Minimum Diameter: mm 80 Maximum Diameter: mm 440 Working Speed: m/min > 7 Motor Power: kW 4 Weight: kg 260 Dimensions (L x W x H): 850 x 850 x 1050 Bending Capacity NBM 76 Thick-walled Pipes mm 76×3 Black Steel Pipe mm 70×5 Aluminum Pipe mm 76×6 Solid Round Bar (black steel) mm 45 Square Pipe (black steel) mm 50x50x5

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1990, nomor mesin/kendaraan: 260900101013, diameter pipa: 42 mm, panjang pipa: 3.000 mm, Ketebalan dinding tabung (maks.): 25 mm, radius tekuk: 170 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Crsdpjw T Sqgsfx Ad Doh Aplikasi: Pemrosesan pipa yang dapat dibengkokkan, pipa persegi panjang, batang bulat, serta pipa kotak DETAIL TEKNIS Diameter pipa: 42 mm Ketebalan dinding: 25 mm Diameter baja bulat maks.: 20 mm Pipa bahan kotak: 25 x 25 mm Radius tekuk dalam maks.: 20 mm Radius tekuk luar maks.: 170 mm Arah pembengkokan: kiri Panjang tarik pipa: 3.000 mm Kontrol: perangkat lunak RC 7000 Pemrograman: manual Pengoperasian: melalui panel kontrol DETAIL MESIN Berat mesin: 2,8 t Dimensi panel kontrol: 800 x 700 x 2.000 mm Dimensi mesin perkiraan (P x L x T): 5,1 x 0,7 x 2,0 m PERLENGKAPAN - berbagai perkakas bending untuk pipa 25 mm - 12 unit collet penjepit dan berbagai alat bantu serta alat penjepit

Kondisi: bekas, Mandrel Tube Bending Machine 42 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151–153 Crsdpfx Ajwnrt Ssd Djh D - 44143 Dortmund - Wambel

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter: 6 - 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control system: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display in the operator panel for angle presets, angle detection, and measurement via absolute encoder, automatic tool plate return, rotation unit with digital display, hydraulic quick-release chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Credpfxjvtgn Ns Ad Deh Control buttons: Hydraulic on/off, operating mode selection, clamp close/open, advance/retract, mandrel advance/retract, bend forward/reverse, lock forward/reverse, mandrel lubrication, rotation device forward/reverse, plate return, length stop forward, emergency stop. The machine comes from prototype production and was used only sparingly until 2000. Afterwards, the machines from this department were sold. The buyer never used the tube bending machine, therefore it has only been stored and has not operated since (original paint). This is a used machine, therefore we sell under exclusion of any warranty. INVENTORY DEALER WITH 1600 m² SHOWROOM.

Kondisi: bekas, Tahun pembuatan: 2012, Pipe diameter 51 mm Wall thickness 3 mm Control – semi-automatic UZMA Max. bending radius: 225 mm Crodpfx Aopunglod Doh Max. bending angle: 190° Bending speed: 35°/sec Mandrel length: 3,100 mm Motor power: 5.5 kW Operating voltage: 380 V Total power requirement: 11.0 kW Machine weight: approx. 1.36 t Space requirement: approx. 4.20 x 1.60 x 1.20 m - Factory No.: 0144 - Semi-automatic mandrel bending machine - Bending angle is program-controlled - Length and rotation angle adjustable manually - Digital display for rotation angle, length, and bending angle - Supplied with the following bending tools: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / Flat material 40 x 10 mm

Kondisi: baru, Features: Bending radii: R10 to R200 (minimum R = 1.8xD) Crodouudrkopfx Ad Deh (depends on wall thickness, material, and tube diameter) Max. bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 programs with 9 bends each Control: NC1 Bending direction: counter-clockwise Usable length (available in different lengths as required): 1.5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The stated price refers to 1.5 m length. Other lengths available on request! Early mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Capacity: Hard copper and aluminum: 60 x 4 mm Steel tube: 60 x 3 mm Stainless steel: 60 x 2 mm Scope of delivery: Machine Standard accessories (including foot switch, operating manual, 2 hex keys, 4 sets of chuck jaws, bending grease, 25 mm mandrel rod) Delivery without hydraulic oil

Kondisi: baru, Tahun pembuatan: 2024, diameter pipa: 60 mm, daya: 2,2 kW (2,99 hp), masa garansi: 12 bulan, kecepatan operasi: 45.000 mm/dtk, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS Standard Equipment Self-memory NC Control panel provides professional and easy operation of the machine Capable of bending pipes up to Ø60mm x 4 mm Clamp fixture supports the pipe during fixation to the machine Pre-drilled holes for mounting special fixtures Welded steel construction body Csdpfxevkua Uj Ad Derh Thermal, power, and reset indicator lights Emergency stop button Machine has internal memory for 500 programs Minimum bending radius is 3 times the pipe diameter (Ø), depending on wall thickness and material Ø33.7 mm Standard 1 set of pipe dies included User manual MODEL NBM 60 Minimum Diameter mm 80 Maximum Diameter mm 320 Working Speed m/sec 3 Motor Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 Bending Capacity NBM 60 Heavy-Walled Pipe mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Solid Round Bar (Black Steel) mm 40 Square Pipe (Black Steel) mm 40x40x4

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles Crsdpfjng A R Sox Ad Deh OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, Manual length and angle positioner for 6000 mm pipe length Codpjv Tz S Aefx Ad Djrh The bending capacity can be found in the attached technical documentation in PDF format.

Kondisi: baru, Metallkraft RB 54 Mandrel-free Tube Bending Machine NC-controlled, with large program memory. NC control for setting the bending angle High-quality, robust construction Up to 50 programs storable Fast tool change Fully motor-driven Automatically returns to home position TECHNICAL DATA: Max. bending radius: 125 mm Max. bending angle: 210° Bending speed(s): 2 rpm Torque: 2341 Nm Length (product): approx. 600 mm Width/Depth (product): approx. 220 mm Height (product): approx. 470 mm Weight (net): approx. 107 kg Bending capacity pipe material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Codpfofdr Sajx Ad Dsrh Bending capacity pipe material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity pipe material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Drive motor power: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Note: Base frame available as an option.

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises Codpfxeng Amkj Ad Dsrh • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: Cedpfonfvx Nsx Ad Djrh • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. Cjdenh R Ekspfx Ad Derh TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube dimensions ranging from 20 to 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD can also be reliably achieved in serial production. With a tool height of 120 mm, there is ample capacity for special profiles as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid design of the mandrel support and bending arm, contribute to the desired bending results. The plug-in bending tools enable quick changeovers to other tube sizes. The clamping force for tube fixation is fully adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angle, length, and twisting angle for up to 50 bend sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In "Simple Bending", the length and angle of the bends are automatically displayed relative to each other. In the "Controlled Bending" mode, the data is stored beforehand and a permanent target/actual comparison is conducted during the bending process. Crsdonh R Sujpfx Ad Djh Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal fabrication • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control; bend angle adjustment (0.1°) • Mandrel support lengths: 3000/4500/6000 mm • Maximum 180º bend result • Weight: 1600–3200 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and twist positioning via automatic braking function or manual stops using foot switch • Semi-automatic length and twist positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information session at your location • Advice and acquisition via leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance Cjdpjnfvy Usfx Ad Djrh

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Crjdpfjndn Agex Ad Djh Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE TUBE BENDING MACHINE FOR TIGHT BEND RADII: This bending machine, equipped with a free-standing bending head, can be easily converted for right- or left-handed bending, making it ideal for handling complex geometries. The plug-in bending tools allow for quick changeovers to accommodate different tube diameters. A high-speed hydraulic system reduces non-productive times—an essential factor for series production. Clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, lengths, and rotation angles for up to 50 bends per tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine features two operating modes: In "Simple Bending," the length and rotation of the bends relative to each other are displayed automatically. In "Controlled Bending" mode, the bending data is preset, and a continuous target/actual comparison is performed during bending. This minimizes user-dependent error rates by eliminating mispositioning within a tolerance window. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically retracted early upon achieving the desired bend angle. The compact drive unit with detachable mandrel support offers advantages on site, especially for custom constructions with very large tube feed lengths. It is also available in a stationary version with an integrated storage system for tools and mandrel rods. An economical alternative to fully automated CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • System engineering, e.g. chemical industry • Metal construction • Prototyping Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Minimum/maximum bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control with bend angle setting (0.1°) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions available in longer lengths) • Maximum bending angle: 180º • Weight: 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Crodpfx Adjng Exas Dsh • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Automated or manual (via foot switch) positioning of length and rotation with brake function • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking clamping force • 10" touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Consulting and information session at your location • Consulting and transaction possible as leasing/financed purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Condition: new Delivery time: approx. 4 weeks from order Country of origin: Italy Price: €9,340 Leasing rate: €180.26 Max. diameter (steel pipe): 48 mm Length: 570 mm Width: 410 mm Height: 1,000 mm Weight: 110 kg Max. bending section modulus: 6 cm³ Standard steel pipe: 48 x 3.5 mm Gas pipe for pipelines: 1"1/2 x 3.68 mm Furniture construction pipe: 54 x 1.5 mm St35 (for hydraulic pipes): 50 x 4 mm Stainless steel AISI304-318: 48 x 2 mm Stainless steel AISI308 (food grade): 48 x 2 mm Soft brass: 60 x 3 mm Hard copper and aluminium: 64 x 2 mm Soft copper: 64 x 2 mm Conduit pipe (TAZ): 60 x 2 mm Mepla, Geberit and similar: 50 x 4 mm Round steel (S275JO): 32 mm Flat bar (S275JO): 45 x 16 upright, 45 x 25 mm Max. bending radius: 300 mm Min. bending radius: 10 mm Min. pipe Ø: 10 mm Max. bending speed: 2/3 rpm Motor: 1.5 kW Three-phase Digital angle display Digital clamping point display Spring-back compensation Quick-change tool system 2 hexagonal tool holders (40 and 50 mm) Precise positioning of the sliding shoe Mobile with travel device Foot switch Operating manual ALSO AVAILABLE AS THE FOLLOWING MODEL (PRICE ON REQUEST): SB 48M (single-phase, 2 rpm) Model with TCPlus control panel upon request MACHINE KIT WITH TOOLS (PRICES ON REQUEST): . Machine Tube Radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø Bending segments: Ø 1/2" (21.3 mm), R46 Ø 3/4" (26.9 mm), R56 Ø 1" (33.7 mm), R67 Ø 1 1/4" (42.25 mm), R90 Ø 1 1/2" (48.25 mm), R100 . Machine Tube Crsdpewirlkofx Ad Djh Radius SB 48M K3D SB 48M Gas inch 3 x Ø SB 48T K3D SB 48T Gas inch 3 x Ø Bending segments: Ø 1/2" (21.3 mm), R67 Ø 3/4" (26.9 mm), R82 Ø 1" (33.7 mm), R112 Ø 1 1/4" (42.25 mm), R130 Ø 1 1/2" (48.25 mm), R150

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 4806067, 25059 Technical Specifications: - Bending capacity for tubes at 45 kg/mm²: up to Ø 48 x 3.5 mm - Solid material up to: 30 mm - Bending angle: 0 - 180° - Maximum center line bending radius (Rm): 225 mm - Minimum internal bending radius (Ri): 10 mm - Drive: 220 V / 1.7 kW - Space required: approx. W 400 x H 950 x D 600 mm - Weight: approx. 100 kg - Features: Credpfxjv Dux Ds Ad Djh - Programmable bending angle preselection - Digital bending angle display with fine adjustment - Bending tools included: Ø ½” R 67 mm, Ø 1” R 67 mm

Kondisi: baru, Tahun pembuatan: 2020, Mandrel bending machine Zopf 32 H with hydraulic tube clamping Crsdpfjfh Nz Tox Ad Doh with basic programmable control Mandrel length: 3000 mm Bending capacity: round tube up to 32 x 2.0 mm St 37 Max. bending radius: 275 mm Min. bending radius: 36 mm Max. bending angle: 190 degrees Bending speed: Bending motor: 2.2 kW Hydraulic motor: 1.5 kW Weight: 400 kg 400 Volt, 50 Hz, 3-phase.