Beli Traub Tnc 65 Dgy bekas (96)

Kondisi: bekas, Tahun pembuatan: 2004, produsen pengendali: Mitsubishi, model controller: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Gtodjxhbfnjpfx Adtot Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub-Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Turret I (X/Y/Z): Technology: 10-position turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Turret II (X/Z): Technology: 10-position turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feeder: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic parts gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, cleaning pistol

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, jam operasional: 46.282 h, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, tinggi total: 2.600 mm, panjang total: 11.000 mm, lebar total: 2.000 mm, berat keseluruhan: 6.000 kg, produsen pengendali: TRAUB, model controller: TX 8F, kecepatan spindle sekunder (maksimal): 4.000 rpm, jumlah slot dalam magazin alat: 10, en Godpfowpa Ruex Adtott

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 38.433 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 489, Diameter batang (maks.): 65 mm, model controller: TRAUB TX8F, panjang batang: 3.000 mm, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, Mesin CNC otomatis bubut dengan tujuh sumbu serta spindle utama dan spindle balik! RINCIAN TEKNIS Sumbu dan spindle Jumlah sumbu: 7 Spindle utama: ada Spindle balik: ada Jumlah revolver: 2 Sumbu C: 2 Sumbu Y: 1 Kontrol: TRAUB TX8F Gtedpfx Aew Uiktjdtst DETAIL MESIN Jam operasi: 38.433 jam PERLENGKAPAN Majalah pengisi batang otomatis Stamag DN61 (diameter batang 65 mm, panjang batang 3 m) Sistem pendingin Pengeluaran komponen Konveyor serbuk Filter udara

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Gtedpjv Scrhofx Adtet

Kondisi: belum diuji (bekas), Tahun pembuatan: 1996, jam operasional: 46.282 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 18770, model controller: TX 8F, diameter penjepit: 65 mm, kecepatan spindle sekunder (maksimal): 4.000 rpm, diameter benda kerja (maks.): 56 mm, No reserve price - guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obliges the buyer to collect the machine within the specified period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Constant power range (counter spindle): 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool mounting: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Index time per station: 0.6 s Index time over 5 stations: 1.5 s Input and output unit X/Z: 0.001 mm Input and output unit C-axis: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999.999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ±3 min Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Temperature range: 5 – 40 °C Max. relative humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed entry: 5 digits Cutting speed input: 4 digits Tool entry: 4 digits Program number: 8 digits Gtodpfx Adsxpgl Aetst Subprogram number: 8 digits Block number: 4 digits M function codes: 3 digits B function codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17/10/2025) EQUIPMENT Two 10-position tool turrets with driven tool stations HAINBUCH chuck system Counter spindle STAMAG bar loader Chip conveyor

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC twin-spindle lathe Traub, completely overhauled in 2025, is available. Turning length: 450mm, spindle bore: 65mm, max. speed: 4000rpm, main spindle/sub-spindle power: 18.5kW/11kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed travel: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed travel: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed travel: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12,938h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation available. An on-site inspection is possible. Gjdpfx Adev Scrbjtett

Kondisi: baik (bekas), Tahun pembuatan: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control: TRAUB TX Location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Rotational speed: 8,000 rpm X-axis travel: 450 mm Turning length: 450 mm Spindle speeds: 4,000 rpm Clamping diameter: 42 / 65 mm Spindle bearing diameter (front): 110 mm Tool mounts: 14 Max. torque: 170 / 230 Nm Rapid traverse X-axis: 15 m/min Gedpfx Adox Sw Icetett Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 30 m/min Required space (LxWxH): 4,354 x 2,076 x 1,917 m Cross section of turning and milling slide: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5,000 N Feed travel X-axis: 140 mm Feed travel Z-axis: 450 mm Feed travel Y-axis: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Additional Information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Deskripsi menyusul Gedpfx Ajx A Hdfsdtstt

Kondisi: bekas, Tahun pembuatan: 2003, tnc65-1 Gjdpfsxbtp Esx Adtjtt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 15.001 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 462, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F Gtjdpfxjw Uiqye Adtst MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Counter spindle 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Kondisi: bekas, Tahun pembuatan: 1996, de-to-hu-it-lt Gtedpfoxbtq Nox Adtot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 364, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Counter spindle Gtedpfx Adjw Ec Alstet 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 Gtjdpfxewi Izhe Adtet • 2x 10-position turrets with driven tool holders, VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: baik (bekas), Tahun pembuatan: 1996, CNC turning center TRAUB Type: TNC65 DG, Year of manufacture: 1996, Control: TRAUB TX8F Gjdpou Eug Iofx Adtott Comes with extensive accessories.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Traub Monitor TFT Layar TX8D TX8F TX8H monitor pengganti layar pengganti Gjdox Adb Iepfx Adtjtt Tipe: TFT (1) No. Art.: 222549 (2) No. Art.: 10892558 Kondisi: baru Monitor/Layar TFT Traub TX8D, TX8F, TX8H dengan bingkai dan kabel, dapat diganti satu per satu, 12" Solusi Plug and Play Bukan suku cadang asli Traub – 100% diuji, kompatibel Diproduksi oleh cnc-markt GmbH

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. Godpfewi I Eyex Adtott The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Kondisi: baru, 3 safety windows suitable for CNC lathes TRAUB TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Dimensions: 660 x 480 mm Price: €500.00 / each net Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Gjdpfx Ajw Edq Dsdtott Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Godpfx Ajwp D Nbjdtstt Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Gsdpfx Adst Hwq Dotett Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, equipped with bar loader

Kondisi: baik (bekas), Tahun pembuatan: 1994, TRAUB TNS 65 D / 5-Axis CNC Turning and Milling Machine - TX8 D Control - Complete technical data available in photos Gjdpfsw D Df Eex Adtjtt - Year of manufacture: 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Errors and omissions excepted.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS Gjdpfx Asuhadzodtstt - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter 1 angetriebener radialer ER Spannzangenhalter 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter Gtedpfx Adoq Npqmetst 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 10.170 h, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, Deskripsi menyusul Gedpfx Aox A Ha Hedtstt

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Gsdpfxjw E Nnbj Adtett Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNX65 with bar loader and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i - Both tool turrets have been refitted with new seals - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer’s tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 Gtsdpfxewm Igfj Adtjt - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg