Beli Traub Tna 600 bekas (97)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 22.232 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 317, panjang pembubutan: 1.000 mm, diameter pembubutan: 680 mm, daya motor spindle: 60.000 W, kecepatan spindel (maks.): 2.800 rpm, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Panjang pembubutan: 1.000 mm Diameter pembubutan: 680 mm Daya motor spindle: 60.000 W Putaran spindle maksimum: 2.800 rpm RINCIAN MESIN Model kontrol: TX 8H Data listrik Tegangan operasi: 400 V 3~ Tegangan kontrol: 24 V ~ Giedpfx Aow Rp Svjdtel Tegangan katup: 24 V – Tegangan kopling: 24 V – Daya total: 60 kW Arus total: 100 A Waktu operasi spindle: 22.232 jam PERLENGKAPAN Dokumentasi/manual Putaran dapat diatur secara kontinu Konveyor serbuk RUEZ SFWW2 Oil separator Pemegang alat VDI40 Dokumentasi lengkap Catatan: Pembongkaran dan pemuatan dapat didukung dengan personel dan derek.

Kondisi: baru, 3 safety windows suitable for CNC lathes TRAUB TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Dimensions: 660 x 480 mm Price: €500.00 / each net Delivery time: immediate, subject to prior sale Gsdpfx Aew Edq Dodtjil Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 246, panjang pembubutan: 900 mm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 400 mm, tinggi total: 2.700 mm, panjang total: 5.000 mm, lebar total: 2.000 mm, berat keseluruhan: 7.000 kg, produsen pengendali: TRAUB, model controller: SYSTEM TX 8H, jumlah slot dalam magazin alat: 12, TRAUB TNA 400 Mesin Bubut CNC Giedpfx Adox Tzx Ijtel - Tegangan operasi: 400 V - Frekuensi: 50 Hz - Daya terpasang: 36 kW - Arus nominal: 70 A - termasuk satu tailstock serta chuck HAINBUCH, juga dilengkapi conveyor serpihan, TOOL EYE, dan satu chuck tambahan merek FORKHARDT, diameter: 250 mm Perhatian: Item harus diambil secara wajib antara tanggal 18 dan 26.02.2026 pada tanggal yang akan disepakati. FCA D-78087 Mönchweiler - dimuat ke atas truk

Kondisi: bekas, Tahun pembuatan: 2000, drehdurchmesser-275-mm-drehlange-450-mm-system-tx-8h Gisdpfox Sr Haex Adtel

Kondisi: bekas, Tahun pembuatan: 1990, translation_001 Godpfew I R Ndex Adtjil

Kondisi: bekas, Tahun pembuatan: 1987, jam operasional: 80.678 h, Fungsionalitas: berfungsi sepenuhnya, Deskripsi menyusul Gijdpfxox A Hl As Adtjl

Tahun pembuatan: 2005, Kondisi: baik (bekas), 7 pieces of driven tool holders suitable for CNC lathe TRAUB TNA 480, toolholder size VDI 40. Also compatible with SAUTER tool turrets with VDI 40 mount. 7 pieces horizontal, nos. 3/4/5/6/7/8/9, for drilling and milling – price per piece €550 2 pieces horizontal, nos. 1 and 2, for tapping – price per piece €600 1 NC drill chuck VDI 40, clamping range 1–13 mm – price €100 Godpfxehwnfke Adtoil 1 NC drill chuck VDI 40, clamping range 2.5–16 mm – price €150

Kondisi: baik (bekas), Tahun pembuatan: 2004, Control: TRAUB SYSTEM TX8H Weight: 3,500 kg Dimensions (L x W x H): 3,960 x 1,640 x 1,800 mm Power: 11 kW Spindle speeds: 5,600 / 4,000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe was designed for the following machining of workpieces with a turning length of 450 mm: - For cutting metal and plastics with defined cutting edges using suitable tools - For clamping in chuck sizes 160 to approx. 250 mm - For machining bar stock up to Ø 42 mm or 65 mm - Includes EHS special design part removal unit - Extended chip conveyor: 800 mm Technical data Machining area - Spindle bore: 42 mm - Spindle nose: DIN 55026, size A5 - Chuck diameter: 160-175 mm / 200-250 mm - Max. turning diameter: 275 mm - Cross slide travel over center: 35 mm - Max. turning length: 450 mm - Swing over cross slide: 395 mm - Swing over bed: 520 mm Tool turret - Tool mounts for cylindrical shank DIN 60880: 12 pcs - Shank diameter: 30 mm - Tool cross-section: 20x20 mm - Index time for 1 station: 0.5 sec - Index time additional stations: 0.15 sec Feed drives X-axis: - Travel: 210 mm - Feed force: 5,000 N - Rapid traverse/traverse speed: 15 m/min Z-axis: Giedpjwwl Iusfx Adtjl - Travel: 450 mm - Feed force: 6,000 N - Rapid traverse/traverse speed: 18 m/min Y-axis: - Travel: ±35 mm - Feed force: 6,000 N - Rapid traverse/traverse speed: 10 m/min C-axis: - Speed: 100 rpm - Torque: 140 / 196 Nm - Electric resolution: 0.001° Tailstock - Quill diameter: 70 mm - Quill stroke: 60 mm - Fast retract stroke: 280 mm - Quill force at 55 bar: 8,600 N - Taper according to DIN 228: Mk 4 Steady rest - Clamping range: 8 - 95 mm Parts catcher - Max. part length: 250 mm - Max. part weight: 3 kg

Kondisi: bekas, Tahun pembuatan: 1996, 6701 Godpjxbtqvjfx Adtsil

Kondisi: bekas, Tahun pembuatan: 2001, de-hu-01 Giedsxwdw Ejpfx Adtol

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), Swing diameter: 320 mm, turning length: 1,000 mm, spindle bore: 80 mm, spindle speed: 3,150 rpm, travel X/Z: 265 mm / 1,000 mm. Machine dimensions X/Y/Z: approx. 5,500 mm / 2,400 mm / 2,400 mm, weight: approx. 7,000 kg, control system: Traub System TX-8. Includes a tool set, three-jaw chuck, and bar feeder with collets. Documentation available. Inspection on site is possible. Gijdpfx Adswzld Detol

Kondisi: bekas, Tahun pembuatan: 1997, Spindel lubang 80 mm Diameter putar maksimum 460 mm Panjang putar maksimum 1.000 mm Kontrol Sistem TX 8F Kecepatan spindle maksimum 2.800 rpm Mesin bubut CNC | TRAUB - TNA 500 Gjdpfoxbtpxsx Adtjil Mesin dalam kondisi terawat dan dapat diperiksa dalam keadaan terhubung listrik kapan saja. Data teknis mesin akan segera menyusul. Mohon pengertiannya! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Kondisi: sangat baik (bekas), Manufacturer: GRÜN SYSTEMTECHNIK WETZLAR including case Gedpfox Tdi Ajx Adteil We offer an original ATC measuring microscope, which was originally taken from a TRAUB TNA turning center. The device is designed for integration into the automatic tool changer and can be used on various CNC machines with a suitable tool holder interface (size comparable to TRAUB TNA400). Key Features and Benefits: • Universal Application: Suitable for any CNC machine with a compatible tool holder interface. • Fast Tool Setup: Enables direct measurement of cutting edges, tool lengths, and radii within the machine. • Process Reliability: Tool wear can be detected and corrected immediately without removing the tool. • Precise Referencing: Useful for checking reference points, bores, and fixtures directly during setup. • Time Savings: Eliminates the need for external presetting devices and reduces downtime. • Compact and Robust Design: Simple integration and operation within the tool change system. This ATC measuring microscope transforms your CNC machine into a precise measurement station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Kondisi: baik (bekas), Tahun pembuatan: 2003, 1249c960 Gjdpfjx A Evmjx Adteil

Tahun pembuatan: 2007, jam operasional: 24.593 h, Kondisi: bekas, nomor mesin/kendaraan: 5010481, Diameter pembubutan maks.: 340 mm, panjang pembubutan maks.: 750 mm, kecepatan spindel maks.: 4.000 rpm, konveyor serpihan, sistem kontrol TX 8I, revolver 12-posisi Gsdpjx Akmqjfx Adtsil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 47.600 h, nomor mesin/kendaraan: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X axis Godpeh Dzqljfx Adtjil Z axis C axis Automatic tailstock Chip conveyor

Kondisi: bekas, Tahun pembuatan: 2011, produsen pengendali: Mitsubishi, model controller: TX-8i, Description: Main spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Gedpfx Adsx E Inmetoil Rapid traverse in X2/Z2: 15 m/min Front attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar feeder, FMB minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Interface mechanically prepped Toolholders: Various fixed and driven holders

Kondisi: baik (bekas), Tahun pembuatan: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control: TRAUB TX Location: Halberstadt Country of origin: Germany Godpfsx Sw Icex Adtjil Machine No.: 93XXXXX Rotational speed: 8,000 rpm X-axis travel: 450 mm Turning length: 450 mm Spindle speeds: 4,000 rpm Clamping diameter: 42 / 65 mm Spindle bearing diameter (front): 110 mm Tool mounts: 14 Max. torque: 170 / 230 Nm Rapid traverse X-axis: 15 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 30 m/min Required space (LxWxH): 4,354 x 2,076 x 1,917 m Cross section of turning and milling slide: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5,000 N Feed travel X-axis: 140 mm Feed travel Z-axis: 450 mm Feed travel Y-axis: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Additional Information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Gisdpfxeu Rqabj Adtjl Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 43.000 h, Fungsionalitas: berfungsi sepenuhnya, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 5.000 kg, lebar total: 1.500 mm, panjang total: 4.000 mm, tinggi total: 2.400 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 40 m/menit, daya: 24 kW (32,63 hp), jarak gerak sumbu Z: 205 mm, Perlengkapan: dokumentasi / manual, Kami menawarkan salah satu mesin kami untuk dijual, yang akan dinonaktifkan sebagai bagian dari pembaruan armada mesin yang telah direncanakan. Mesin yang dimaksud adalah mesin bubut kepala geser TRAUB TNL 18P, diproduksi pada tahun 2013, dalam kondisi teknis yang baik. Alasan penjualan adalah akuisisi teknologi baru sebagai bagian dari modernisasi mesin kami. Jam operasi saat ini adalah 43.000. Penawaran ini juga termasuk FMB Minimag 20/3200 bar feeder, yang memastikan pemasukan material ke mesin berjalan lancar dan efisien. Sebagai bagian dari pengiriman, kami juga dapat menyediakan perlengkapan internal, termasuk bushing pemandu dan collet untuk spindle utama, spindle tambahan, dan bar feeder, cocok untuk diameter material hingga 12 mm. Giedpfxjxdk Ukj Adtsl Jika Anda berminat, jangan ragu untuk menghubungi saya.

Kondisi: sangat baik (bekas), Multispindle and bar automatic lathes TRAUB TK 42 * Spindle power: 5.5 – 9 kW * Max. workpiece length: 206 mm * Spindle bore: 42 mm * Length (L – R): 2500 mm * Width (F – B): 900 mm * Height: 1700 mm Gedpfx Adewc Aqdjtjil * Tool changer mount: 4 slides

Kondisi: bekas, Tahun pembuatan: 2004, produsen pengendali: Mitsubishi, model controller: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub-Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Turret I (X/Y/Z): Technology: 10-position turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Turret II (X/Z): Technology: 10-position turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Godpfjxhbfnjx Adteil Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feeder: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic parts gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, cleaning pistol

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Max. workpiece diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on): 23,495 h Tool turret: 12 stations Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shaft DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200 mm, hydraulic clamping Operation via double foot switch and control panel/operator desk Coolant system The TRAUB features an integrated chip conveyor with an ejection height of 1,100 mm (currently not functional). Accessories: various small parts 8 machine feet (various) without tailstock as is. Giedpfju Ix N Ssx Adtjl

Kondisi: baik (bekas), Tahun pembuatan: 2013, AUTOMATIC BAR LATHE TRAUB A 25 Year: 2013 Gjdpfxowc Amxj Adteil Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirements approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar loader included!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Multispindle & bar automatic lathe TRAUB TD 26 1991 * Power per spindle: 2.2 kW Giedpfx Ajwc Aqwsdtjl * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4750 rpm * Total power: 3.2 kW * Length (L – R): 1800 mm * Width (F – B): 1000 mm * Height: 1400 mm * Weight: 800 kg * Tool changer holder: 6 tools Additional Information * Max round bar: 26 mm * Max square bar: 18 mm * Max hexagon bar: 22 mm * Bar loader available