Beli Vc 999 bekas (6.391)

Kondisi: baik (bekas), Vakuumverpackungsmaschine. Gsdewt Tmkjpfx Adqskc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, VC-999 QS8 + VC-999 K8T1A-SP ID.NR. 2922 VC-999 Kammermaschine mit zugehöriger VC-999 Verpackungsmaschine, die zuvor für große ganze Käseblöcke verwendet wurde. Abmessungen: 480 x 190 cm, Höhe 225 cm. Gksdpfxov Iz Hve Adqsc

Kondisi: bekas, Tahun pembuatan: 2002, Overview This automatic heat sealing machine for pre-formed trays is manufactured by INAVEN MASCHINEN AG (VC999), model TS1200 N. It is specifically designed for vacuum heat sealing and modified atmosphere packaging (MAP) to achieve improved preservation, enhanced product presentation, as well as easier storage and transport. The machine automatically performs the MAP cycle, thermal sealing, and gas flushing, precisely cuts the film, and automatically collects the film waste. Gsdpstzg H Refx Adqjkc Technical Specifications - Length: 4400 mm - Width: 870 mm - Height: 1790 mm - Infeed conveyor: 2700 mm - Outfeed conveyor: 1120 mm - Power: 6 kW; electrical supply: 400 V, 50 Hz Scope of delivery: Tray sealer | VC 999 | TS 1200 | Year: 2002

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), VC999 07P vacuum packaging machine, year of manufacture: 2007. Connection: 400V. Chamber dimensions approx. 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps, year of manufacture: 1998, output 2x 5.5 kW. Gedpfxef Srcfj Adqokc Very good condition, fully operational.

Kondisi: sangat baik (bekas), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Overall Dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Gjdpfxjxfh Spe Adqskc time deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state, according to IEC 60068-3-5 dependent on test chamber temperature time deviation: ±0.1 to ±0.3 K spatial deviation: ±0.5 to ±1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Fuse protection: 16 A slow-blow, provided by customer Refrigerants: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), There are a total of four Engel injection moulding machines available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999. This machine is defective and being sold for spare parts. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation is available. An on-site inspection is possible. Individual sales are possible. Gkedpfxov Extze Adqoc

Kondisi: baik (bekas), Edelstahlrahmen, 50-kg-Edelstahltrichter, Gesamtlänge 2200 mm, Vibrationsförderer Maße 2000 mm x 600 mm, mobil, 1-Phasen-Anschluss Gsdpfjgmthcox Adqekc

Kondisi: sangat baik (bekas), Heraeus Vötsch Climate Test Chamber We are offering you a Heraeus Vötsch climate test chamber. Model: VC³ 0100 Test chamber dimensions (H x W x D): approx. 950 x 1100 x 950 mm TEMPERATURE TESTING: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate (cooling): 0.2 K/min Temperature change rate (heating): 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Heat compensation at +20°C: 350 W CLIMATE TESTING: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% r.h. Gkodpfx Adjn Ard Soqec Temporal humidity deviation: ± 1 to ± 3% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.6 kW Rated current: 12 A Refrigerant: R 404A Weight: approx. 1400 kg For your security as the buyer, please note the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Type: VC³ 0100 / Year of manufacture: 2013 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various used injection moulding machines are available: 1) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2003, operating hours: approx. 100,000 h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2006, operating hours: approx. 105,000 h. 5) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 6) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 7) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 8) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 67,000 h. 9) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2007, operating hours: approx. 98,000 h. Gkedpfxev R Ew Ds Adqoc 10) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 11) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2001. 13) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2002. 14) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2006, operating hours: approx. 107,000 h. Documentation is available. On-site inspection is possible. Machines can be sold individually.

Kondisi: sangat baik (bekas), Heraeus Vötsch Climate Test Chamber We are offering a Heraeus Vötsch Climate Test Chamber. Heraeus Vötsch climate chamber with humidity control (water-cooled) Gksdemt Du Topfx Adqjc Test chamber internal dimensions: Width 800 mm x Depth 800 mm x Height 950 mm External dimensions: Width 1090 mm x Depth 1960 mm x Height 1995 mm Specification for temperature tests: Temperature range: -45°C to +180°C time deviation ± 0.1 to ± 0.5 K spatial deviation ± 0.5 to ± 1.5 K Rate of temperature change according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate tests: Temperature range: -45°C to +180°C Temperature deviation in steady-state, per IEC 60068-3-5 depending on test chamber temperature Temperature range: -10°C to +95°C time deviation ± 0.1 to ± 0.3 K spatial deviation ± 0.5 to ± 1.0 K Humidity range: 10% to 98% RH Temporal humidity deviation: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber volume: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your safety as a buyer, please note the following information! The following procedures are carried out on the chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are run through a test cycle, which is monitored using calibrated equipment. Condition: used Scope of delivery: (See picture) (Technical details are subject to change and errors excepted!) If you have any further questions, please contact us by phone.

Kondisi: sangat baik (bekas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Gedpfx Adsqwim Ejqskc Temperature change rates: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 W Data for climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature uniformity: ±0.5 to ±1.0 K Temporal humidity deviation: ±1 to ±3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your safety as a buyer, please note the following! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Technical specifications and details are subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Vötsch Climate Test Chamber We are offering a Vötsch climate test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Feedthrough ports: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Gkedpfxsqmn A Ns Adqec Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight: approx. 840 kg Type: VC³ 4100 Important buyer information for your safety! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Pressure test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test Chamber Volume: 990 liters Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate (Cooling): 0.2 K/min Temperature Change Rate (Heating): 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Homogeneity: ±0.5 to ±1.0 K Heat Compensation at +20°C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% r. H. Temporal Humidity Deviation: ±1 to ±3% r. H. Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Homogeneity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V±10% 50Hz Rated Power: 2.3 kW Rated Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers in advance: Gedpjtz T D Asfx Adqskc 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data, information may vary!) Feel free to contact us by phone for further questions.

Kondisi: sangat baik (bekas), Vötsch Climate Test Chamber We offer here a Vötsch climate test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Godpfx Asqnutmsdqekc Cable port: Ø 125 mm / Ø 50 mm Specifications for temperature tests: - Temperature range: -42°C to +180°C - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature uniformity: ± 0.5 to ± 1.5 K - Temperature change rate: Heating 4.0 K/min, Cooling 3.0 K/min - Max. heat compensation at +20°C: 4,500 W Specifications for climatic tests: - Temperature range: +10°C to +95°C - Dew point range: -3°C to +94°C - Humidity range: 10 to 98% r.H. - Temporal temperature deviation: ± 0.1 to ± 0.3 K - Spatial temperature uniformity: ± 0.5 to ± 1.0 K - Temporal humidity deviation: ± 1 to ± 3% r.H. - Max. heat compensation: 500 W Mains voltage: 3/N/PE AC 400V ±10% 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 Important information for buyer safety! The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications are subject to change and error!) For further questions, please do not hesitate to contact us by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2006, CNC Vertical Machining Center Manufacturer: MAZAK Model: VC-NEXUS 510 C Year of manufacture: 2006 CNC control: Mazatrol PC Fusion CNC 640 M Nexus Working area: Table size (clamping area): 550 x 1300 mm Maximum table load: 1,200 kg T-slots: 5 pcs Distance between T-slots: 100 mm T-slot width: 18 mm Travel X/Y/Z: 1,050 x 510 x 510 mm Rapid traverse: 36 m/min Feed rate: 1 – 8,000 mm/min Distance spindle nose to table: 150 – 660 mm Spindle: Speed range: 35 – 12,000 rpm Tool holder: SK40 Main drive power: 18.5 kW Godpfxjttv Uhj Adqskc Tool magazine: Tool stations: 30 Max. tool diameter: 80 mm With adjacent stations free: 125 mm Max. tool length: 350 mm Max. tool weight: 8 kg Approx. machine weight: 6,900 kg Approx. dimensions L/W/H: 3.00 x 2.85 x 2.85 m Equipment: Tool length measuring device Complete coolant system Coolant and chip guard Work area lighting 3.5" floppy disk drive Documentation Special accessories: High-pressure through-spindle coolant, pump pressure approx. 15 bar Precision drilling cycle Tornado MAZAK Monitoring System B, Renishaw unit (M10) CROMAR chip conveyor, side discharge 91025ä

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, gearbox sangat kuat, motor 1,0 / 1,8 kW Mata gergaji: 360 mm Model putaran lambat dengan 6 kecepatan pemotongan: 8 / 10 / 12,5 m/menit 16 / 20 / 25 m/menit Pemotongan uji di tempat kami dengan spesifikasi berikut: Kapasitas pemotongan pada 90 derajat dengan ukuran blade 360 mm: Profil bulat: 110 mm Material bulat padat: 80 mm Profil datar: 200 x 80 mm Gkedpjxlzkljfx Adqec Berat sekitar 560 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Travels 2000 x 550 x 560 mm Spindle taper BT40 Spindle speeds - 12,000 rpm Tool changer with 32 positions Gjdpfx Aderrf Svsqjkc Control: FANUC 18i Tool breakage monitoring Tool length measurement device Partition for pendulum operation Chip conveyor Various accessories MARCELS MASCHINEN CH

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 45.312 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.020 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 18 m/menit, produsen pengendali: Siemens, model controller: 840D, panjang benda kerja (maks.): 1.200 mm, lebar benda kerja (maks.): 600 mm, berat benda kerja (maks.): 1.000 kg, tinggi total: 2.800 mm, panjang total: 2.900 mm, lebar total: 2.200 mm, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 8.000 rpm, panjang alat: 250 mm, diameter alat: 120 mm, berat alat: 7 g, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin dalam kondisi sangat baik. Rincian Teknis Pergerakan-x: 1.020 mm Gkedpfjw U Eirjx Adqoc Pergerakan-y: 610 mm Pergerakan-z: 610 mm Kontrol: Siemens 840 D Spindel Utama: Kisaran kecepatan putar spindel utama: 60 - 8.000 rpm Daya penggerak spindel utama: 12,3 / 18,5 kW Torsi maksimum: 177 Nm Tipe dudukan alat: (SK 40) Diameter bearing spindel: 70 mm Meja kerja: Ukuran meja: 1.200 x 600 mm Beban maksimum meja: 1.000 kg Alur-T: 5x 18 x 125 mm Penukar alat: Jumlah posisi alat: 24 posisi diameter maksimum alat: 80 mm diameter maksimum alat dengan slot tetangga kosong: 120 mm Panjang maksimum alat: 250 mm Berat maksimum alat: 7,0 kg Waktu pergantian: sekitar 6,5 detik Feedrate: Pergerakan cepat (X / Y / Z): 24 / 24 / 18 m/menit Kebutuhan daya total: sekitar 30 kVA

Kondisi: bekas, Tahun pembuatan: 1979, Saw blade diameter 380 mm Cutting diameter 135 mm Single stroke adjustment 700 mm Drive power 1.9 kW Speed 1500/3000 rpm Machine weight approx. 1.36 t Gjdpfx Adjrw Dkgsqskc Space requirements approx. 2.6 x 1.2 x 1.8 m Simple but robust cold circular saw automatic machine - 9 saw blades Ø 350-370 mm - Minimum quantity lubrication - Chip remover - Chip collection box - Cutting speed adjustment via pulleys - Documentation - New counter

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Gjdjqwipnspfx Adqekc Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu (instead of WEILER VC plus display) The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 37.513 h, Data Umum Berat mesin: 9500 kg Penggerak Utama Taper alat: BT40 Gedpfx Aoxg Ui Dodqokc Jumlah sumbu: 3 Pergerakan Pergerakan Sumbu X: 762 mm Pergerakan Sumbu Y: 516 mm Pergerakan Sumbu Z: 570 mm Alat Jumlah posisi alat: 40 DOOSAN VC 510 3-sumbu ini diproduksi tahun 2012. Dilengkapi dengan pusat pemesinan vertikal twin pallet dengan ukuran meja 2 x 860 x 570 mm, tinggi benda kerja maksimum 520 mm, dan kecepatan spindle 10.000 rpm. Mesin ini memiliki ATC 40 alat, pergerakan sumbu X 762 mm, sumbu Y 516 mm, dan sumbu Z 570 mm. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal DOOSAN VC 510 ini. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Milling/pengelasan

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Fully hydraulic circular saw automatic machine, Manufacturer: TRENNJAEGER Technical Data: Saw motor, pole-switchable: 1.5 / 2.0 kW Saw blade: 275 mm 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min Gjdpfx Aexg A Iuedqskc - Integrated hydraulics - Safety enclosure with limit switch protection - 6 cutting speeds

Kondisi: bekas, Tahun pembuatan: 2007, gaya penjepit: 120 kN, volume langkah: 154 cm³, tekanan injeksi: 2.175 batang, berat keseluruhan: 7.300 kg, jam kerja: 70.000 h, diameter konveyor sekrup: 35 mm, Shipping terms: ex works Delivery time: by arrangement Payment terms: 100% prior to machine takeover, strictly net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Minimum mold installation height: 300 mm Gedeqy Uklepfx Adqjkc Maximum mold installation height: - Platen dimensions (H x V): 790 x 680 mm Centering diameter (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar CONTROL: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hotrunner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated discharge conveyor (operating side opposite) +750mm, needle shut-off (hydraulic + pneumatic), interface for color dosing unit and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: drive motor + heating Total weight: 7,300 kg Overall dimensions (L x W x H): 4.4 x 1.4+0.8 x 2.0 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 29.083 h, Data Umum Berat mesin: 9500 kg Unit Kontrol Merek: FANUC Penggerak Utama Rentang kecepatan spindle: 10.000 rpm Tipe tirus alat: BT40 Gjdpfx Asxg Ui Rsdqokc Jumlah sumbu: 3 Pergerakan Gerak sumbu X: 762 mm Gerak sumbu Y: 570 mm Gerak sumbu Z: 570 mm DOOSAN VC-510 3-sumbu ini diproduksi pada tahun 2013. Mesin ini merupakan machining center vertikal dua palet dengan ukuran meja 2 x 860 x 570 mm, tinggi maksimal benda kerja 520 mm, dan kecepatan spindle maksimum 10.000 rpm. Mesin dilengkapi ATC 40 alat, gerak sumbu X 762 mm, gerak sumbu Y 516 mm, dan gerak sumbu Z 570 mm. Pertimbangkan kesempatan untuk membeli pusat pemesinan vertikal DOOSAN VC-510 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 28.446 h, Unit Kontrol Merek: FANUC Pergerakan Gerak Sumbu X: 762 mm Gerak Sumbu Y: 516 mm Gerak Sumbu Z: 570 mm DOOSAN VC 510 3-sumbu ini diproduksi pada tahun 2014. Mesin ini merupakan vertical machining center dengan twin pallet dan ukuran meja 2 x 860 x 570 mm, tinggi maksimal benda kerja 520 mm, serta kecepatan spindle 10.000 rpm. Dilengkapi ATC 40 alat, perjalanan sumbu X 762 mm, sumbu Y 516 mm, dan sumbu Z 570 mm. Pertimbangkan kesempatan untuk membeli vertical machining center DOOSAN VC 510 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Gsdpfxoxgv T Do Adqskc Jenis Aplikasi Frais