Beli Vc 999 bekas (5.760)

Kondisi: sangat baik (bekas), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« Podpfxswgayks Ab Iogw All control and operation commands can be initiated by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and provide sufficient ventilation for the machine compartment, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with ports on the right and left sides, allowing measurement lines and test equipment to be routed into the test chamber interior. Standard ports installed: R1: DN 125 mm L1: DN 50 mm Test Chamber Interior Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Exterior Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C temporal deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temporal temperature deviation at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at the center of usable space: ±1 to ±3 % r.h. Electrical connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be provided onsite Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your security as a buyer, please note the following: The following measures are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Pedpfx Absw Idlle Iegw >> Electric chip guard >> Machine feet >> Splash guard About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 6.000 h, Unit Kontrol Merek HEIDENHAIN Model TNC 640 Pjdpfxjxtq Uve Ab Iegw SPINNER VC 1650-5A-9 5-sumbu ini diproduksi pada tahun 2018, dilengkapi spindle motor dinamis hingga 9.000 rpm, versi HIGH-TORQUE, dan kontrol Heidenhain TNC640. Mesin ini dilengkapi meja rotary 360°, meja penjepitan tambahan, dan penukar alat otomatis untuk 96 alat. Ideal untuk interpolasi simultan 5-sumbu yang kompleks dan machining presisi. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin SPINNER VC 1650-5A-9 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Milling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, vcnc-bearb-spinner-85012 Pedpjxwywnjfx Ab Ijgw

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Fully hydraulic circular saw automatic machine, Manufacturer: TRENNJAEGER Technical Data: Saw motor, pole-switchable: 1.5 / 2.0 kW Saw blade: 275 mm Pgjdpfxsxwkdxj Ab Ijw 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min - Integrated hydraulics - Safety enclosure with limit switch protection - 6 cutting speeds

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 81.963 h, VC 500/110 tech Tahun: 2007 Gaya penjepit: 1100 kN Unit injeksi: 500 Unit kontrol: EC200 A01 Diameter sekrup: D45 Jam kerja: 81.963 Kontrol pemanasan cetakan 8 zona 4x input digital, 4x output digital 2x soket satu fasa 1x soket tiga fasa 1x katup tiup udara Pgodpfjxvz Rgjx Ab Iew Robot terintegrasi + konveyor sabuk ER-HLI 41 X – pneumatik: Jarak gerak: 20 - 150 mm Kisaran penyesuaian: 0 - 300 mm Y: pneumatik Maks. jarak gerak: 250 mm Kisaran penyesuaian: 0 - 100 mm Z – servo Penggerak: motor servo Transmisi daya: sabuk bergerigi Kecepatan maks.: 2,0 m/dtk Jarak gerak maks.: 1025 mm Sumbu C (3,5 Nm): Penggerak: silinder pneumatik Jarak gerak maks.: 0 - 90 derajat 1 sirkuit vakum/udara tekan yang dapat diganti

Kondisi: sangat baik (bekas), Vötsch Model: VC 7330/S Climate Chamber, Water-Cooled Internal Volume: 3300 liters Specifications for Temperature Testing: Temperature Range: -70°C to +180°C Spatial Temperature Deviation: ±1 to ±2 K (corresponds to temperature gradient) (2 to 4) Temporal Temperature Fluctuation at Chamber Center: ±0.5 - 1 K Rate of Temperature Change (according to IEC 60068-3-5): Heating: 1.5 K/min Cooling: 1.5 K/min Specifications for Climatic Testing: Podpfx Abju Au Erj Iegw Temperature Range: +10°C to +90°C Humidity Range: 10% r.h. to 98% r.h. Temporal Temperature Fluctuation: ±0.2 to -0.5 K Temporal Humidity Fluctuation: ±1% r.h. to ±3% r.h. Dew Point Range: +5°C to +89°C Mechanical Load Data: Test Chamber Floor Load Capacity: 150 kg Max. Chamber Floor Load: 250 kg Test Chamber Dimensions: Width 2000 mm x Depth 1150 mm x Height 1510 mm External Dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating Data: Test Chamber Illumination: Halogen bulb 12 V, 20 W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 15 kW Rated Current: 34 A External control via RS 232 interface possible. Refrigerants: R404A / R23 Weight: 1550 kg For your security as a buyer, please note the following information! The following procedures are always performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: bekas, Tahun pembuatan: 2015, Axes: 3 Psdpfxjwlvryo Ab Isgw 4th axle: Lift axle SK50 head: yes Machine weight: approx. 8.5 t

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 75 - 132, berat keseluruhan: 250 kg, lebar dalam: 500 mm, panjang dalam: 700 mm, tinggi dalam: 500 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin dilelang karena penutupan usaha. Dengan mengajukan tawaran, Anda berkewajiban untuk mengambil mesin tepat waktu antara 26.01.2026 dan 29.01.2026! DETAIL TEKNIS Dimensi interior (P x L x T): 700 x 500 x 500 mm DETAIL MESIN Tegangan operasi: 220 V Dimensi & Berat Pgsdsxqnxyjpfx Ab Iew Dimensi (P x L x T): 1.000 x 880 x 1.500 mm Berat: 250 kg

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), spinner-cnc-fraesmaschine-2024 Podpfx Abexwn I Ue Isgw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 199583, gaya penjepit: 1.800 kN, diameter sekrup: 35 mm, tekanan injeksi: 1.595 batang, gaya ejektor: 80.000 N, langkah pembukaan: 1.050 mm, tech-details-001 Pjdexuqh Sspfx Ab Ijgw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, - BEKAS - PUSAT PEMESINAN VERTIKAL 3-SUMBU TIPE MEJA BERJALAN PERGERAKAN SUMBU X: 2050 mm PERGERAKAN SUMBU Y: 550 mm PERGERAKAN SUMBU Z: 560 mm JARAK UJUNG SPINDEL-MEJA: 180-740 mm JARAK KOLOM-SUMBU SPINDEL: 638 mm GERAK CEPAT X-Y-Z: 30 m/menit SPINDEL: BT-40; 15-18,5 kW; 12000 rpm UKURAN MEJA: 550 x 2500 mm MAKSIMAL BEBAN DIZINJKAN: 1200 kg PENDINGIN TEKANAN TINGGI: 20 Bar MAGAZIN ALAT: 40 POSISI; TIPE RANTAI DIAMETER MAKSIMAL ALAT: 80 mm PANJANG MAKSIMAL ALAT: 350 mm BERAT MAKSIMAL ALAT: 8 kg UNIT KONTROL: FANUC 0i-MF BERAT: 9050 kg DIMENSI KESELURUHAN: 5300 x 3430 x 3045 mm AKSESORIS: KONVEYOR SERPIHAN; PORT ETHERNET; PORT USB; HANDWHEEL PORTABEL CATATAN: PEMBATAS MEJA UNTUK OPERASI PENDULUM Pedpfxexn U Rde Ab Ijgw

Kondisi: bekas, Vötsch Model: VC 0018 Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Specifications for temperature testing: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state according to IEC 60068-3-5, depending on test chamber temperature over time: ±0.1 to ±0.5 K spatially: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5: Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat compensation in the range +20 °C to +50 °C: 200 W Calibration points: +4 °C and +90 °C Specifications for climate tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state according to IEC 60068-3-5, depending on test chamber temperature over time: ±0.1 to ±0.3 K spatially: ±0.5 to ±1.0 K Humidity range: 10% to 98% rh Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Rated current: 9.5 A (Neutral conductor in plug: loaded) Approx. connection cable: 3.5 m with Schuko plug Fuse: 16 A slow-blow, to be provided onsite Weight: approx. 380 kg net Refrigerant: R-134A Important safety information for buyers: The following procedures are performed on all chambers offered: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Pgodpfx Abow Swrtj Iow Scope of delivery: (see image) (Technical specifications subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, ENGEL VC 200-45 Tahun: 2004 Gaya penjepitan: 450 kN Unit injeksi 200 Unit kontrol CC200 A01 Screw D35 Jam kerja: 88.963 4x input digital, 4x output digital 2x soket fasa tunggal Pgodpfoxuqwgsx Ab Ijw 1x soket tiga fasa 1x katup tiup udara

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, tekanan injeksi: 2.000 batang, berat injeksi: 300 g, tinggi cetakan (min.): 394 mm, lintasan ejektor: 120 mm, jenis arus masuk: tiga fasa, gaya penekanan: 130 t, MESIN INJECTION ENGEL VICTORY DENGAN TEKANAN PENUTUP 130 TON, TANPA KOLOM, BERFUNGSI PENUH Pgjdpfx Ajxqdw Seb Ijw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Travels 2000 x 550 x 560 mm Spindle taper BT40 Spindle speeds - 12,000 rpm Tool changer with 32 positions Control: FANUC 18i Tool breakage monitoring Pgjdpjrrf Svjfx Ab Iew Tool length measurement device Partition for pendulum operation Chip conveyor Various accessories MARCELS MASCHINEN CH

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution Pgsdpfxjqwipne Ab Iow - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu (instead of WEILER VC plus display) The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 28.446 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MV0061-000288, panjang pemakanan sumbu X: 762 mm, panjang umpan sumbu Y: 516 mm, panjang umpan sumbu Z: 570 mm, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 516 mm, jarak gerak sumbu Z: 570 mm, kecepatan spindel (maks.): 10.000 rpm, lebar meja: 570 mm, panjang meja: 860 mm, posisi kepala milling: Vertical, masa garansi: 3 bulan, daya: 1,42 kW (1,93 hp), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de Psdpfx Abov Du A As Ijgw

Kondisi: baik (bekas), Tahun pembuatan: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, centre distance 500 mm, max. swing over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix tool holder, 24 longitudinal feeds, metric threads, imperial threads, Podev Ifxiopfx Ab Isgw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 37.513 h, Data Umum Berat mesin: 9500 kg Penggerak Utama Taper alat: BT40 Jumlah sumbu: 3 Pergerakan Pergerakan Sumbu X: 762 mm Pergerakan Sumbu Y: 516 mm Pergerakan Sumbu Z: 570 mm Pgjdsxg Ui Depfx Ab Iow Alat Jumlah posisi alat: 40 DOOSAN VC 510 3-sumbu ini diproduksi tahun 2012. Dilengkapi dengan pusat pemesinan vertikal twin pallet dengan ukuran meja 2 x 860 x 570 mm, tinggi benda kerja maksimum 520 mm, dan kecepatan spindle 10.000 rpm. Mesin ini memiliki ATC 40 alat, pergerakan sumbu X 762 mm, sumbu Y 516 mm, dan sumbu Z 570 mm. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal DOOSAN VC 510 ini. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Milling/pengelasan

Kondisi: bekas, Tahun pembuatan: 2007, gaya penjepit: 120 kN, volume langkah: 154 cm³, tekanan injeksi: 2.175 batang, berat keseluruhan: 7.300 kg, jam kerja: 70.000 h, diameter konveyor sekrup: 35 mm, Shipping terms: ex works Delivery time: by arrangement Payment terms: 100% prior to machine takeover, strictly net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Minimum mold installation height: 300 mm Maximum mold installation height: - Platen dimensions (H x V): 790 x 680 mm Centering diameter (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar Pedpfxsqy Ukls Ab Iegw CONTROL: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hotrunner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated discharge conveyor (operating side opposite) +750mm, needle shut-off (hydraulic + pneumatic), interface for color dosing unit and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: drive motor + heating Total weight: 7,300 kg Overall dimensions (L x W x H): 4.4 x 1.4+0.8 x 2.0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 37.513 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MV0061-000073, panjang pemakanan sumbu X: 762 mm, panjang umpan sumbu Y: 516 mm, panjang umpan sumbu Z: 570 mm, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 516 mm, jarak gerak sumbu Z: 570 mm, kecepatan spindel (maks.): 10.000 rpm, lebar meja: 570 mm, panjang meja: 860 mm, posisi kepala milling: Vertical, masa garansi: 3 bulan, daya: 1,42 kW (1,93 hp), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de-DE Pedpfxsv Duy Is Ab Iegw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 29.083 h, Data Umum Berat mesin: 9500 kg Unit Kontrol Merek: FANUC Penggerak Utama Pgodpfxexg Ui Rj Ab Ijw Rentang kecepatan spindle: 10.000 rpm Tipe tirus alat: BT40 Jumlah sumbu: 3 Pergerakan Gerak sumbu X: 762 mm Gerak sumbu Y: 570 mm Gerak sumbu Z: 570 mm DOOSAN VC-510 3-sumbu ini diproduksi pada tahun 2013. Mesin ini merupakan machining center vertikal dua palet dengan ukuran meja 2 x 860 x 570 mm, tinggi maksimal benda kerja 520 mm, dan kecepatan spindle maksimum 10.000 rpm. Mesin dilengkapi ATC 40 alat, gerak sumbu X 762 mm, gerak sumbu Y 516 mm, dan gerak sumbu Z 570 mm. Pertimbangkan kesempatan untuk membeli pusat pemesinan vertikal DOOSAN VC-510 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: bekas, Tahun pembuatan: 2007, gaya penjepit: 120 kN, volume langkah: 154 cm³, tekanan injeksi: 2.177 batang, berat keseluruhan: 7.300 kg, jam kerja: 62.000 h, diameter konveyor sekrup: 35 mm, Freight basis: ex works Delivery time: by arrangement Payment terms: 100% prior to machine takeover, strictly net Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 62,000 CLAMPING UNIT: - Clamping force: 120 t Opening stroke: 500 mm Minimum mold height: 300 mm Maximum mold height: - Platen dimensions (h x v): 790 x 680 mm Psdpfjqxympox Ab Ijgw Centering rings (nozzle-ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,177 bar CONTROL SYSTEM: CC200 Screen languages: DE Operating manual: DE EQUIPMENT: - Core pulls: 2 Air valves: yes Hot runner control zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated deposit conveyor (opposite operator side) +750mm, needle shut-off (hydraulic + pneumatic), interface for color dosing unit and temperature control unit. GENERAL DATA: - Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: motor + heating Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 29.083 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MV 0061-000242, panjang pemakanan sumbu X: 762 mm, panjang umpan sumbu Y: 516 mm, panjang umpan sumbu Z: 570 mm, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 516 mm, jarak gerak sumbu Z: 570 mm, kecepatan spindel (maks.): 10.000 rpm, lebar meja: 570 mm, panjang meja: 860 mm, posisi kepala milling: Vertical, masa garansi: 3 bulan, daya: 1,42 kW (1,93 hp), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de-001 Podpfev Du Avjx Ab Isgw