Beli Vertikal Mesin Bor bekas (79.564)

Kondisi: bekas, ALZMETALL AB 4 SV Column Drilling Machine Machine no. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle taper: MK 4 - quick quill Throat depth: 340 mm Quill stroke: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Kedpfen N Ekcjx Aa Nodg Spindle speed: 30 - 765 rpm, infinitely variable Motor power: 2.3 and 3.4 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds and stepless variator gearbox - Back gear with 2 transmission stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed rates: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece mounting surface - LED lighting unit Space requirement (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg In good condition

Kondisi: bekas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine no. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Nominal arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Power supply: 380 Volt, 50 Hz, 15 kW - Clockwise/counterclockwise rotation of the drilling spindle via hand lever switch - Hydraulic gear shifting for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition Kdodpfx Aolhwr Rja Neg

Kondisi: bekas, WEBO multi-spindle drilling machine with 4 stations, Model B 20 Serial Nos.: 376/13; 376/14; 376/27; 376/36 Year of manufacture: approx. 1970 Drilling capacity: 20 mm Spindle taper: MK 2 – long quill Distance between drilling heads: 335 mm Throat depth: 260 mm Quill travel: 190 mm Table size: 350 x 1500 mm Distance spindle/table: min. 30 mm / max. 700 mm Spindle speeds drill head 376/13: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Spindle speeds drill head 376/14: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Spindle speeds drill head 376/27: 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm Spindle speeds drill head 376/36: 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm Motor power: 1.1 / 1.3 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustment via 2 motor speeds and 4 stepped V-belt pulleys - Drill head height adjustment via rack-and-pinion with hand crank approx. 300 mm - Height-adjustable drill table approx. 350 mm Kjdpfjihmwtex Aa Nedg Space requirement (L x W x H): 1750 x 1100 x 1900 mm Weight: 1900 kg In good condition

Kondisi: bekas, CNC universal coordinate drilling and milling machine FEHLMANN model PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 Serial no. 16186651 Year of manufacture: 1986 Spindle taper FEHLMANN SF32 Drilling capacity Ø 30 mm in steel Tapping up to M20 in steel Travel distances X: 850 mm, Y: 435 mm Quill stroke Z: 210 mm Vertical head movement 580 mm Feed rate X and Y 1 to 8000 mm/min Feed rate Z 1 to 4000 mm/min Rapid traverse X and Y 8 m/min Rapid traverse Z 4 m/min Clamping surface of table 1570 x 500 mm Distance spindle nose – table 130 - 720 mm Spindle overhang – column 450 mm Spindle speed 50 - 7100 rpm, infinitely variable Spindle drive 10 kW Total connected load 20 kW Kdjdpjhik Ezofx Aa Njg Power supply 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3-axis control: X, Y and Z (quill adjustment) - hydro-mechanical tool clamping FEHLMANN SF32 - tapping device - cable remote control for machine operation and axis movement - motorized vertical movement of milling head with cutoff via adjustable limit switches - 3D probe RENISHAW, type MP 11F with Fehlmann SF32 holder - 20 tool holders FEHLMANN SF32 - swing tool rack with 21 tool positions - coolant system integrated in machine base - control cabinet fixed to the machine - documentation: operating instructions, control manual, and electrical diagrams Space requirement (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Kondisi: bekas, Kepala frais vertikal, kepala frais dengan penggerak motor THIEL Tipe penahan alat: MK 5 (Morse Taper ukuran 5) Gerak pinol/spindel: 80 mm Putaran spindel pada putaran motor 1410 rpm = 490 / 780 / 1200 rpm Ksdpfx Ajxddwrsa Nodg Putaran spindel pada putaran motor 2950 rpm = 970 / 1530 / 2380 rpm Lubang spindel: 37 mm Daya motor: 1,4 / 1,8 kW Kecepatan motor: 1410 / 2850 rpm Tegangan listrik: 400 Volt, 50 Hz - Kecepatan spindel melalui 2 kecepatan motor dan 3 tahap sabuk - Flens pemasangan kepala frais Ø 215 mm dengan 2 lubang Ø 15 mm, jarak antar lubang 180 mm - cocok untuk alat dengan ulir penarik (alat dengan ejector tidak dapat dipasang) Dimensi (P x L x T): 450 x 400 x 350 mm Berat sendiri: 61 kg kondisi baik

Kondisi: sangat baik (bekas), Nomor katalog 7829 DATA TEKNIS - Jumlah spindel: 20 unit - Diameter maksimum alat: 10 mm - Jarak spindel dapat diatur: depan/belakang, kiri/kanan - Ukuran permukaan meja: 530x1300 mm - Tinggi ke permukaan meja: 950 mm - Langkah kerja meja: 100 mm - Pengaturan meja naik/turun: pneumatik dan manual - 3 penekan pneumatik - Motor utama: 3×2,2 kW - Dimensi panjang/lebar/tinggi: 1700x1130x1600 mm - Berat: 555 kg KEUNGGULAN – Buatan Polandia – Jarak spindel dapat diatur: depan/belakang, kiri/kanan – Meja diangkat secara pneumatik – Tidak dicat – Mesin bor bekas, kondisi sangat baik Kdsdsxzh Nyopfx Aa Neg Harga netto: 18.900 PLN Harga netto: 4.500 EUR sesuai kurs 4,2 EUR (Harga dapat berubah mengikuti fluktuasi kurs)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, de Kedpfx Ajuu Rybja Nsdg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 50 h, de Ksdpfxjguq Txs Aa Nodg

Kondisi: bekas, Tahun pembuatan: 1995, 0 Kdjdpfx Ajx U Dkcoa Neg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, - BEKAS - KEPALA SPINDEL KEMBAR PUSAT PEMESINAN VERTIKAL 3-SUMBU DENGAN ROTOPALLET GERAK SUMBU X: 520 mm GERAK SUMBU Y: 360 mm GERAK SUMBU Z: 360 mm JARAK MONCONG SPINDEL-MEJA: 200-560 mm KECEPATAN GERAK CEPAT X-Y-Z: 60 m/menit SPINDEL: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALET: 2 unit BEBAN MAKSIMAL: 450 kg MAJELIS TOOL: 21X2 posisi DIAMETER MAKSIMAL TOOL: 88 (125) mm PANJANG MAKSIMAL TOOL: 250 mm UNIT KONTROL: FANUC 31i A5 Ksdpfex U E Szox Aa Nedg BERAT: 5300 kg DIMENSI KESELURUHAN: 3200 x 3250 x 3245 mm AKSESORI: Konveyor serbuk logam; Filter kertas; Pompa pendingin tekanan tinggi; Setter alat CATATAN: DENGAN 1 MEJA SUMBU KE-4

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Radialbohrmaschine, Csepel RFM 51, Gebrauchtmaschine Hersteller: Csepel Kdjdpfxjwcqlcs Aa Nog Modell: RFM 51 X-Achse: 4000 mm Auslegerweg: 3100 mm Radius: 2460 mm Abstand von der Basis zur Spindel: 1660 mm Bohren in Stahl: 100 mm Bohren in Gusseisen: 120 mm

Kondisi: bekas, Tahun pembuatan: 2007, Operating hours: 7669 h Technical data: Travel distances X/Y/Z: 500 / 400 / 500 mm Distance column–spindle: 400 mm Distance spindle nose–table: 102 - 610 mm Distance floor–table: 787 mm Table size: 990 x 400 mm Ball screw diameter: 32 mm, double supported Rapid traverse: 25.4 m/min Max. feed rate in X/Y/Z: 20 m/min Spindle speed: 10 – 8000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool positions: 21 Max. tool diameter: 76 mm with free adjacent slots: 114 mm Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 – 8 bar Weight, approx.: 3765 kg Kedpfxjw D Dgis Aa Nodg Equipment: GE Fanuc 0i-MC control: - Standard CNC control - User-friendly graphical display - Simple operation, programming, and diagnostic options Steinmeyer ETA and double-supported ball screws: - Increased rigidity - Minimal friction Cast iron base with robust box ways: - Flame-hardened box ways - Wide support on guideways - High vibration damping

Kondisi: bekas, Tahun pembuatan: 2007, Running hours: 6,796 h Ksdpsw Du Eijfx Aa Nedg Technical Data: Travel X/Y/Z: 500 / 400 / 500 mm Distance column to spindle: 400 mm Distance spindle nose to table: 102 - 610 mm Distance floor to table: 787 mm Table size: 990 x 400 mm Ball screw diameter: 32 mm, double-supported Rapid traverse: 25.4 m/min Max. feedrate in X/Y/Z: 20 m/min Spindle speed: 10 - 8,000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool magazine capacity: 21 Max. tool diameter: 76 mm With free adjacent pockets: 114 mm Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3,765 kg Equipment: GE Fanuc 0i-MC Control: - Standard CNC control - User-friendly graphical display - Simple operation, programming, and diagnostic features Steinmeyer ETA and double-supported ball screws: - Increased rigidity - Minimal friction Cast base with robust flat guides: - Flame-hardened flat guides - Wide bearing surface on guideways - High vibration damping Note: On this machine, the tool changer is defective (no longer changes tools).

Kondisi: baik (bekas), Tahun pembuatan: 1999, Bohrerschleifmaschine, Bohrerschleifgerät, Werkzeugeschleifmaschine, Spiralbohrerschleifmaschine -Hersteller: CUOGHI AFFILATRICI, Bohrerschleifmaschine Typ APE60 mit Ausspitzeinrichtung Kdedpjyab Syefx Aa Neg -Bohreraufnahme: bis Ø 60 mm -Schleifscheiben:Ø 200 x 45 x 32 -Kühlmitteleinrichtung: vorhanden -Zubehör: incl. Werkzeuge siehe Foto -Abmessungen: 860/880/H1300 mm -Gewicht: 275 kg

Kondisi: bekas, Tahun pembuatan: 2007, 358288dd Kdsdpfx Aasyaci Hj Nog

Kondisi: bekas, Tahun pembuatan: 2005, de2hu-it-lt-lv-nb-nl-pl Kjdpjx U Em Eefx Aa Njdg

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication Kdodpfx Aexwaz Hsa Nog - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). Kdjdpfx Aoxnlfloa Neg - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: bekas, Mesin Bor Merek: GSP Tipe: 407C27 Jangkauan: 2250 mm Kapasitas pengeboran (baja): - umpan normal: diameter 70 mm - umpan lambat: diameter 90 mm Ksdpfx Asyanmwsa Nedg Langkah troli pada lengan: 1900 mm Radius pengeboran (min. - maks.): 630 - 2500 mm Tinggi (min. - maks.): 500 - 1750 mm Langkah vertikal lengan: 850 mm Langkah spindel: 400 mm Kecepatan spindel: 25 hingga 1400 rpm Daya motor: 6 kW Koni spindel: MT 5

Tahun pembuatan: 2007, jam operasional: 8.500 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Vertical Machining Center Emco FAMUP MCX 750-1200 with 40 bar Through-Spindle Coolant Year of manufacture: 2007 Control: Fanuc 21i Operating hours: 8,500h Chip Blaster high-pressure system - Max. spindle speed 8,000 rpm • Tool magazine with 24 magazine slots (ISO 40) • Tool holder ISO 40 - 24 draw bars ISO 40 • Standard paint: Red – Grey – Black • Spindle prepared for high-pressure cooling (Connection A) • Tapping without compensating chuck • Central lubrication system • Chip removal from enclosure via flushing device • Cleaning pistol for work area, clamping devices, parts • Coolant system with 3 adjustable nozzles • Coolant tank 500 l • Spindle air blast device for cleaning the taper during tool change • Work area illumination with 24 V halogen lamp • Two-color alarm lamp TECHNICAL DATA Kdjdoh Akhkopfx Aa Nsg MCX 750 X-axis travel (longitudinal): 750 mm Y-axis travel (crosswise): 500 mm WORKING AREA Z-axis travel (vertical): 640 mm Clamping surface: 900 x 520 mm T-slots: Number, width, spacing 5x18x100 mm Max. table load: 400 kg TABLE Distance table surface – floor: 925 mm Speed range: 50 ÷ 8,000 rpm Spindle motor power: 13/9 kW Tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive: Belt drive Rapid traverse X,Y,Z m/min: 24 Working feed X,Y,Z m/min: 20 AXIS DATA Axis acceleration (X,Y,Z) G: 0.25 Unidirectional positioning accuracy across entire travel XYZ µm: ±8 Repeating precision X, Y, Z µm: ±8 PRECISION Reversal error µm: 5* Number of tool stations: 24 Tool selection: random Max. tool diameter with (without) adjacent tools ø: 75 (150) mm Max. tool length: 250 mm Max. tool weight: 6 kg TOOL CHANGE Tool change time (tool/tool): 1.5" Connected load: 20 kVA Dimensions LxWxH: 2,650 x 2,400 x 3,050 mm Weight: 5.5 t.

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: Kodpfeifn N Nex Aa Nodg - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: baru, Tahun pembuatan: 2025, en-GB Kdsdswkf Izepfx Aa Nsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi pembubutan: 1.700 mm, berat benda kerja (maks.): 10.000 kg, diameter putar di atas sled silang: 2.040 mm, diameter pembubutan: 2.000 mm, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Z: 1.661 mm, diameter pelat muka: 1.600 mm, laju pemakanan sumbu Z: 3 m/menit, tinggi total: 6.177 mm, lebar total: 5.638 mm, panjang total: 3.937 mm, gerak cepat sumbu X: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, jenis arus masuk: AC (pendingin udara), kecepatan rotasi (maks.): 258 rpm, kecepatan rotasi (min.): 1 rpm, torsi: 16.070 Nm, beban meja: 10.000 kg, diameter meja: 1.600 mm, tahun perombakan terakhir: 2024, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, - CNC-Einheit (FANUC 32i-A) - Automatische Werkzeugwechsler-Einheit (ATC) Pot-Kapazität (18 Töpfe) Für das Linearschneiden Standard-Werkzeughalter Werkzeughalter für das Linearschneiden - Spannfutter - Kühlschmierstofftank - Druckluftpistole - Werkzeug- & Bettwascheinheit - Spritzschutz (Spritzschutz) - Hydraulikeinheit - Achs-Führungsabdeckung - Arbeitsleuchte - Warnleuchte - Leiter und Handlauf - Werkzeugkasten für Standardwartung - Manuelles MPG-Handrad - Späneförderer Kjdpfxsulk D Ij Aa Njdg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Pusat Pemesinan Vertikal (BAZ) dengan Y-Axis 1000 mm, ideal untuk pembuatan cetakan. Tahun pembuatan: 2010. Kontrol: Heidenhain iTNC 530. Ukuran meja: 2220 x 1000 mm. Kapasitas beban meja: 3000 kg. Perjalanan sumbu: X 2020 mm, Y 1000 mm, Z 800 mm. Daya spindle: 25 kW. Rapid traverse X/Y/Z: 16/16/12 m/menit. 4 conveyor spiral chip di samping sumbu Y. 4 panduan datar pada sumbu Y. Handwheel elektronik. Tapping tanpa floating chuck. Pelumasan sentral otomatis. Majalah alat dengan 40 slot dan pengambil ganda cepat. Taper ISO 50. Gearbox switching otomatis dengan pendingin oli dari ZF. Skala kaca pada semua sumbu. Pendingin tekanan tinggi melalui spindle 20 bar (IKZ). Filter pita kertas dengan tangki coolant terpisah 330 l. Berat mesin sekitar 19.000 kg. Mesin segera tersedia karena penutupan bisnis. Mesin dapat dilihat dalam kondisi aktif. Kdedpfx Ajxln A Iea Neg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MT 4) • Infinitely variable speed setting • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left side of machine base • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose to table top min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capabilities Drilling capacity (solid material) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Thread cutting St 60 M 36 GG 22 M 45 Kodpfx Aox Uwpxea Nodg Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic