Beli Emag Vsc 315 bekas (125)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 100226, Penawaran mengikat untuk pengambilan tepat waktu pada Minggu ke-1 atau ke-2 tahun 2026! DETAIL MESIN Berat total: 10.000 kg Koneksi listrik Jenis arus: 3~ Iedpfexzt R Nox Ab Ija Frekuensi: 50 Hz Tegangan operasi: 400 V Tegangan kontrol umum: 24 V Tegangan kontrol katup: 24 V Daya terpasang: 36 kW Arus nominal: 56 A Sekering utama: 80 A Koneksi lampu: 24 V Daya koneksi lampu: 18 W

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 6.000 rpm, diameter luar chuck: 250 mm, panjang pemakanan sumbu X: 680 mm, panjang umpan sumbu Z: 200 mm, daya: 39 kW (53,03 hp), gerak cepat sumbu X: 45 m/menit, pergerakan cepat sumbu Z: 30 m/menit, jenis arus masuk: tiga fasa, produsen pengendali: Siemens, model controller: 840 DS, tegangan masuk: 400 V, pasokan pendingin: 6 batang, daya nominal (semu): 45 kVA, Perlengkapan: Pelat tipe tersedia, kecepatan rotasi dapat diubah tanpa batas, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER EMAG - REINECKER VSC 250 DS Used, year of construction: 2015 Control: Siemens 840 DS Condition: Used machine, in good condition Operating hours (approx.): 35,000 Program run time (approx.): 22,000 hours Operating voltage: 400V Air connection: 6 bar Total power requirement: approx. 45 kVA Chiller: water/water Machine dimensions without peripherals (L x W x H): approx. 3200 x 1900 x 2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle with max. speed 45,000 rpm and max. power 18 kW Ijdpfelfduiex Ab Iea Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Portal: EKF basket stacking cell for raw/finished parts storage for baskets 400 x 600 mm on floor rollers 3 basket stacks for uninterrupted operation even during basket change, loading/unloading via loading portal The machine is well-maintained and has been serviced by EMAG. The production process provides for pre/finish machining of the bore/face surfaces by hard turning of the face surfaces and bore/diameter, followed by internal grinding of the bore. No driven tools Inspection under power possible by prior appointment. Dismantling and loading to be carried out by the buyer. Price and details on request / Special price All technical details subject to change/errors. Sale only within EU countries.

Kondisi: bekas, Tahun pembuatan: 2011, diameter pembubutan: 530 mm, produsen pengendali: SIEMENS, model controller: 840 D, jumlah spindel: 1, de-hu-001 Iodpjxt Dkwefx Ab Isa

Kondisi: bekas, Tahun pembuatan: 1994, Weight per unit: 6 t Iodju T Sfhjpfx Ab Ija Units in stock: 2 Set: yes For export only: yes Control system: Siemens

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 67.343 h, Fungsionalitas: berfungsi sepenuhnya, Semua data akan diberikan atas permintaan pada iklan ini. Mesinnya kotor. Hingga Juli, mesin ini memberikan toleransi terbaik di MAGNA POWERTRAIN dan selain itu dalam kondisi sepenuhnya berfungsi. Iedpfx Asxl Ah Ssb Ija

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak gerak sumbu Z: 200 mm, diameter luar chuck: 200 mm, kecepatan spindel (min.): 6.000 rpm, berat keseluruhan: 6.500 kg, daya: 40 kW (54,38 hp), tahun perombakan terakhir: 2023, Perlengkapan: dokumentasi / manual, Kedua mesin membentuk satu kesatuan. Tahun pembuatan 2003, berfungsi penuh dan masih beroperasi. Lihat foto. Mesin-mesin dilengkapi dengan konveyor serpihan untuk kedua mesin. Tangki pendingin ditambahkan secara terpisah. Iedoxq Aruspfx Ab Ioa Sebagai aksesoris terdapat berbagai holder, rahang, dan 1 AGW baru. Mesin masih dapat diuji dalam kondisi operasional.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 83.799 h, Fungsionalitas: fungsi terbatas, panjang pemakanan sumbu X: 685 mm, panjang umpan sumbu Z: 200 mm, jarak pergerakan sumbu X: 685 mm, jarak gerak sumbu Z: 200 mm, diameter luar chuck: 315 mm, gerak cepat sumbu X: 45 m/menit, pergerakan cepat sumbu Z: 30 m/menit, diameter pembubutan: 400 mm, panjang total: 5.200 mm, tinggi total: 3.282 mm, lebar total: 6.300 mm, kecepatan rotasi (maks.): 4.000 rpm, torsi: 460 Nm, berat keseluruhan: 10.000 kg, model controller: Siemens 840D, jenis kontrol: Kontrol CNC, Perlengkapan: unit pendingin, Dijual EMAG VSC400, tahun pembuatan 2006. Dilengkapi dengan kontrol Siemens 840 D. Iedow Dyzispfx Ab Iea Perlengkapan: - Sabuk masuk dan keluar (sabuk O) - Pemindah yang dikendalikan secara pneumatik - Unit penstempel - Konveyor serpihan (pembuangan kiri) - Sistem pendingin cairan - Dudukan alat 12x VDI40 Kerusakan yang diketahui: - Pintu pengisi - Penerangan ruang dalam - Sumbu Z hanya dapat digunakan dalam mode cepat yang dikurangi (feed kerja tidak terpengaruh) Unit dalam kondisi terhubung listrik dan dapat diperiksa.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Machine type: CNC lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Iodpfx Abjkyrwwj Iea Available immediately Ex-works, for self-dismantling Optionally, we can offer dismantling and loading services

Kondisi: bekas, Tahun pembuatan: 2001, Offered here is a vertical pick-up lathe EMAG VSC 250, manufactured in 2001. The machine is equipped with a circular conveyor belt that passes through the machine. Loading of the automation belt takes place at the front side of the machine. The working area features a work spindle and a turret with 12 tool positions. Additional accessories such as chip conveyor, coolant systems or decentralized extraction unit are not included in the scope of this listing. Ijdetrwdtspfx Ab Iea The machine was taken out of service several years ago. After inspection, the VSC 250 is found to be fully functional and is being sold in good condition, as can be seen in the pictures. The machine has been completely cleaned and newly painted. All electrical cabinet components and cables are still in their original condition. CONTROL Siemens Powerline TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm X-axis travel: 685 mm Z-axis travel: 200 mm MAIN SPINDLE Power: 28 kW Speed: max. 6,000 rpm TOOL CARRIER 1x disc turret, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time to be agreed upon.

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Isdpfx Ajia Rtdjb Isa Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 105488, Technical Data: Max. chuck diameter: 250 / 315 mm Swing diameter: 350 mm Max. workpiece diameter: 250 mm Travel: X-axis: 745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece): 4 – 6 s Main spindle: Spindle flange DIN 5502: Size 6 Front spindle bearing, max. bore: 110 mm Max. spindle speed: 5,500 rpm Iedowfgzlepfx Ab Ija Tool turret: Number of tool stations: 12 Shank diameter: 40 mm Driven tools: Maximum power: 8.5 kW Max. speed: 6,000 rpm Turret indexing time: 0.3 s CNC control: Bosch Rexroth MTX

Kondisi: bekas, TECHNICAL DATA - Max. turning diameter: 520 mm - Travels (X/Z): 1000 / 400 mm - Max. feed force X and Z: 1100 daN - Rapid traverse (X/Z): 45 / 30 m/min - Ballscrew diameter (X/Z): 50 mm - Spindle nose: A2-11 - Spindle motor power: 71 kW - Spindle speed range: 0 - 3400 rpm - Max. chuck torque: 750 Nm - Number of turret positions: 12 - Number of driven positions: 12 - Toolholder type: VDI50 - Machine dimensions: 4,050 x 1,960 mm - Installation dimensions: 8,500 x 5,000 mm - Machine weight: 13,500 kg - Installed power: 45 kW Isdpfsuhbfgjx Ab Iea - Electrical supply: 400 V, 50 Hz EQUIPMENT - SIEMENS 840D CNC - RS232 / RJ45 / USB - Marposs part probe - 1 fixed tool post on table: Capto C6 - Coolant tank - High-pressure coolant pump: 23 bar - Cooling unit - KNOLL chip conveyor - Workpiece feeder capacity: 70 - 320 mm - Number of driven toolholders: 6 - Number of stationary toolholders: 6 - 3-jaw Forkhardt chuck Ø: 400 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 72.284 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 685 mm, panjang umpan sumbu Z: 200 mm, jarak pergerakan sumbu X: 685 mm, jarak gerak sumbu Z: 200 mm, diameter luar chuck: 250 mm, gerak cepat sumbu X: 45 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang total: 3.100 mm, tinggi total: 2.650 mm, lebar total: 4.000 mm, kecepatan rotasi (maks.): 6.000 rpm, torsi: 460 Nm, berat keseluruhan: 7.800 kg, model controller: Siemens 840D, jenis kontrol: Kontrol CNC, Perlengkapan: unit pendingin, For sale: EMAG VSC250, year of manufacture 2008. Equipped with Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated part transfer unit - Stamping unit - Chip conveyor (left-side discharge) Isdpow Dyqdefx Ab Isa - Coolant system - Tool turret 12x VDI40 The machine is under power and can be inspected on site.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Two identical Emag VSC 200 machines are available. X-axis travel: 685mm, Z-axis travel: 160mm, chuck diameter: 200mm, swing diameter: 290mm, connected load: 29kW, control system: SIEMENS SINUMERIK. Dimensions: length 2700mm, width 1150mm, height 2800mm. Weight: 6.5t. Supplied with documentation. Isdpsm H Urhefx Ab Iea

Kondisi: bekas, Tahun pembuatan: 2004, Max. turning diameter 250 mm Turning length 100 mm Control system SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7,500 kg Space requirement approx. [to be filled in] E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece loading system Model VSC 250 DS Year 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length inside/outside approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-station tool turret Ø or swing diameter 480/790 mm Slide travel X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m / min Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Accessories / Special equipment • CNC path control SIEMENS 840 D with color display, graphics, menu-guided dialog programming and all standard options, cycles, and subprograms, etc. • 6-position hexagonal tool turret with 6 tool stations (Ø 40), without motorized drive, but functioning as a swiveling axis (B-axis), double bearing and with directional logic • 2 GMN grinding spindles mounted at turret positions T3 and T6, speeds approx. 42,000 rpm and 18,000 rpm, equipped with one CBN wheel and one ceramic pin • Workpiece loading system with circulating carrier frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device at the workpiece change station for rough and finish measurements • NORGREN air gap measuring system (?), hydraulic weight compensation for the main spindle • SMW Autobloc 3-jaw diaphragm chuck (for simplified loading of billet parts) approx. Ø 250 mm, with clamping monitoring • HYFRA recooling unit for cooling the main spindle and thermal stabilization of the machine body, advanced SEITZ paper band filter system, retractable chip conveyor, coolant chiller for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Ijdpfx Abst Hxa Ts Isa Vertical CNC lathes provide a thermally stable design (chips do not fall onto the machine bed), quick workpiece change times (pick-up system via main spindle), and a rigid tool setup that also enables non-standard machining processes. In this application, hardened gears were hard-turned and ground. Condition : Good – ready for demonstration shortly Delivery : Ex stock – as inspected Payment : strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 2012, Turning diameter 400 mm Isdpevxwx Ajfx Ab Iea Swing diameter 420 mm X-axis travel 850 mm Z-axis travel 315 mm Spindle nose to DIN 55026 - Size 11 Spindle bearing diameter 140 mm Max. spindle speed 4000 rpm 12-station tool turret with C5 Capto Rapid traverse X + Z axes 45 / 30 m/min Feed force Z / X 11 kN Total power requirement 58 kW Machine weight approx. 9 t Space requirements approx. 9.5 x 4.5 x 3 m Hard turning Dry machining Chip conveyor Promot portal and Cellmaster No clamping device included No tools included No Cellmaster accessories included

Tahun pembuatan: 2014, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: 105488, Technical Data: Max. chuck diameter: 250 / 315 mm Swing diameter: 350 mm Max. workpiece diameter: 250 mm Travel: X-axis: 745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece): 4 – 6 s Main spindle: Spindle flange DIN 5502: Size 6 Front spindle bearing, max. bore: 110 mm Max. spindle speed: 5,500 rpm Isdpefyaaisfx Ab Isa Tool turret: Number of tool stations: 12 Shank diameter: 40 mm Driven tools: Maximum power: 8.5 kW Max. speed: 6,000 rpm Turret indexing time: 0.3 s CNC control: Bosch Rexroth MTX

Kondisi: bekas, Tahun pembuatan: 2015, Technical details: Iodsq Sc Huepfx Ab Ioa Turning diameter: 200 mm Swing diameter: 260 mm Turning height: 60 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 103342, jarak pergerakan sumbu X: 850 mm, jarak gerak sumbu Z: 315 mm, kecepatan spindel (maks.): 3.400 rpm, diameter pembubutan: 340 mm, en-001 Iedpfx Abov T U T Hs Iea

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Two identical EMAG CNC machining centers, including a chip conveyor, coolant tank, various holders, chuck jaws, and a new AGW, are available. Chuck diameter: 200 mm, max. swing diameter: 290 mm, max. workpiece length: 140 mm, spindle speed: 6000 rpm, power: 34 kW, torque: 480 Nm. Travel X/Z: 550 mm / 200 mm, rapid traverse X/Y: 30 m / 20 m/min, feed force X/Z: 11 kN. Tool stations: 12, driven tool power: 7.8 kW. Machine dimensions X/Y/Z: approx. 2700 mm / 1150 mm / 2800 mm, weight: approx. 6500 kg. Documentation available. On-site inspection possible. Ijdpfxewi Tpqo Ab Isa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 685 mm, jarak gerak sumbu Z: 200 mm, diameter benda kerja (maks.): 200 mm, tinggi benda kerja (maks.): 150 mm, diameter pembubutan di atas alas geser: 250 mm, The machine has been thoroughly cleaned and repainted! TECHNICAL DETAILS Working Area Iedsw Hzupjpfx Ab Ioa Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm Axes Travel X-axis: 685 mm Travel Z-axis: 200 mm Main Spindle Main spindle power: 28 kW Main spindle speed: max. 6,000 rpm MACHINE DETAILS Control: Siemens Powerline EQUIPMENT Round belt 1x disk turret, 12x D40

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2841823, Maximum workpiece diameter: 250 mm Maximum workpiece length: 175 mm Maximum chuck diameter: 315 mm Axis travels: X-axis: 860 mm Z-axis: 200 mm Rapid traverse: X-axis: 45 m/min Z-axis: 30 m/min Main spindle speed: up to 4500 rpm Ijdsv U Emtjpfx Ab Ioa Main spindle power: 28 kW Control system: SIEMENS SINUMERIK 840Dsl Tool turret: 12 positions Maximum workpiece weight: 6 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Używana tokarka pionowa CNC EMAG VSC 250 (rok produkcji 2011) – Wysoka precyzja i automatyzacja Oferujemy na sprzedaż używaną tokarkę pionową CNC EMAG VSC 250 z roku produkcji 2011. Maszyna przeznaczona jest do wydajnych i precyzyjnych operacji toczenia, szczególnie dla detali o masie do ok. 6 kg. Dzięki pionowej konstrukcji oraz zaawansowanej automatyzacji, maszyna idealnie nadaje się do produkcji średnio- i wieloseryjnej, gwarantując wysoką wydajność oraz powtarzalność procesów. Najważniejsze cechy i możliwości: • Konstrukcja pionowa: Optymalne odprowadzanie wiórów oraz łatwe załadunek i rozładunek. • Sterowanie: Siemens SINUMERIK 840Dsl z zintegrowanym PLC S7-300 oraz monitorem TFT 15”. • Wysoka precyzja: Dokładność pozycjonowania w osiach X i Z wynosi ±0,001 mm. • Główne wrzeciono: Wysoka moc i szeroki zakres prędkości obrotowych. • Automatyczny załadunek/rozładunek: Podawanie i odbiór detali odbywa się przez zintegrowaną automatykę. • Narzędzia napędzane: Możliwość użycia narzędzi napędzanych rozszerza zakres obróbki o operacje wiercenia i frezowania. Dane techniczne (EMAG VSC 250): • Producent: EMAG • Rok produkcji: 2011 • Numer maszyny: 103035 1. Napęd główny: * Zasilanie: 400 V/50 Hz / 43 kW * Moc napędu wrzeciona głównego (100% ED / 40% ED): 18 kW / 28 kW * Moment obrotowy wrzeciona: 300 Nm * Zakres prędkości: 0-4500 obr./min * Głowica wrzeciona: DIN 55026-A6 * Maks. masa detalu: ≤ ok. 6 kg 2. Uchwyt: * Hydrauliczny 6-szczękowy uchwyt specjalny EMAG z urządzeniem do zacisku czołowego i centralnym smarowaniem. * Typ: 6AGF 260 K6 K14 * Średnica: 260 mm * Ciężar: 57 kg * Maks. siła zacisku (zacisk wewnętrzny przy 50 bar): 12,8 kN * Maks. siła zacisku (zacisk zewnętrzny przy 50 bar): 4,2 kN * Szczęki zaciskowe: szczęki chwytakowe EMAG: HB-I-G-146-K14 do obróbki blachy mosiężnej (6-krotne). * Adapter szczęk: (6-krotne) L90x840xH50 z drobnym uzębieniem (SAV). * Masa kompletu adaptera szczęk: 5,53 kg. * Szczęki miękkie: SMW MWB-DA 165 Nr 03611 L70xB40xH60. * Masa kompletu miękkich szczęk: 2,70 kg. 3. Przestrzeń robocza: * Przesuw osi X: 745 mm * Przesuw osi Z: 300 mm * Prędkość przejazdu X: 60 m/min * Prędkość przejazdu Z: 30 m/min * Siła posuwu X: 10 kN * Siła posuwu Z: 10 kN 4. Sterowanie: * Siemens SINUMERIK 840Dsl z PLC S7-300 * Monitor TFT 15” * Interfejs V24 5. Dokładność obróbki: * Osie (X/Z): ±0,001 mm * Wrzeciono (oś C): ±0,01° 6. Rewolwer narzędziowy: * EMAG Flange Turret Generation C361 – VDI 40 * Ilość stacji narzędziowych: 12 * Średnica uchwytu VDI: 40 mm * Maks. wymiary narzędzi: zależne od detalu * Czasy wymiany narzędzi (wieżyczka/narzędzie napędzane): 0,03 min / 0,04 min * Maks. prędkość narzędzia napędzanego: 6000 obr./min * Maks. moment i moc narzędzia napędzanego (100% ED / 10% ED): 15 Nm/3,5 kW / 40 Nm/8,5 kW 7. Układ chłodzenia: * Standardowe/najwyższe ciśnienie podawania: 7 bar * Zakres ciśnienia wewnętrznego podawania chłodziwa: 7 bar (brak regulacji) * Pojemność zbiornika: 360 litrów 8. Odbierak detali: * Brak odbieraka detali – załadunek i odbiór detali odbywa się za pomocą automatyki 9. Dane ogólne: * Wymiary maszyny (dł. x szer. x wys.): 3900 mm x 1500 mm x 3200 mm * Masa maszyny: ok. 7000 kg * Warunki otoczenia (temp. / wilgotność): do ok. 30°C / maks. 50% * Poziom hałasu (ciśnienie akustyczne / moc akustyczna): 78 dB(A) Lokalizacja: Zabrze, Polska Ijdpfxewp Ukve Ab Iea Słowa kluczowe: tokarka pionowa, tokarka CNC, EMAG VSC 250, obróbka metalu, toczenie, maszyna produkcy

Kondisi: baik (bekas), Tahun pembuatan: 1998, Emag VSC 200 with workpiece conveyor belt and chip conveyor. Isdpfx Abotq Ifne Ija The main spindle bearings were replaced in 2005. Control system: Siemens 840D Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, Width: 1,800 mm, Height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only operated in 1-2 shift operation.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Offered is a double-spindle pick-up lathe, EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. It is capable of machining either two identical components with the same operation simultaneously, or processing a single workpiece in two consecutive machining steps. According to requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL UNIT Siemens 840 Dsl TECHNICAL DATA Max. workpiece diameter: 440 mm Max. workpiece height: 250 mm Iodpjt Du Tdefx Ab Ioa Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS 2 x EMAG disc turrets, 12 x CDI 68, with driven tools Price, delivery time and machine configuration upon request.