Beli Weeke Bp 145 bekas (69)

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 Nkodpegwbbqefx Aglet No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, CNC flexible gantry machine Horizontal throughfeed panel Control: Power Control Open powerTouch, software: WoodWOP (TAPIO-ready) Infeed table (panel support) + outfeed table (panel support) Panel feed by 3 conveyor belts Nkjdpfsx Aqi Esx Aglet Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special side guide system for workpieces with 'sensitive' edges 3 upper vertical pressure devices Powered conveyor belt for waste removal Integrated electrical and control cabinet Total installed power (kW): approx. 47 OPTIONAL: WIRELESS BARCODE SCANNER 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 drilling supports V15 (4 x 2.3 kW), each with 15 vertical spindles (total: 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 drilling supports V32 (6 x 2.3 kW), each with 32 vertical spindles (total: 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Nsdsh Ryhnspfx Aglekt Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving plate (workpiece), stationary working head – horizontal plate (workpiece) PowerControl control unit (woodWOP software) Safety enclosure for the working head No. 2 safety interlock workpiece clamping jaws within the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamping grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) With automatic panel pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 2500 x 1000 (optional 1300) x 80 mm (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) With separate electrical and control cabinet Nksdpelkdpmofx Aglet WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 23 independent vertical drilling spindles (drilling head output 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW) WORKING UNITS (BOTTOM): No. 23 independent vertical drilling spindles (drilling head output 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW)

Kondisi: diremajakan ulang (bekas), PC control Power Control Software Njdpovhcbzefx Aglekt No. 2 infeed motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 No. 6 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor Total connected load (kW): approx. 50 / 60

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 Nkedolikvhspfx Agljt X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Nodpfx Agjivawpelskt Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 3 Mesin HOMAG WEEKE OPTIMAT BHX 500 3-sumbu ini diproduksi pada tahun 2011. Mesin ini merupakan pusat pemrosesan CNC yang kokoh dengan area kerja 2500 mm x 1300 mm, daya spindle utama 6 KW, dan ketebalan panel maksimum 80 mm. Termasuk 84 spindle pengeboran dan spindle milling ganda, masing-masing dengan daya 6 KW pada 18000 rpm. Jika Anda mencari kemampuan CNC berkualitas tinggi, pertimbangkan mesin HOMAG WEEKE OPTIMAT BHX 500 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Nsdpfx Agox D Nvgjlokt Pemrosesan Kayu CNC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jumlah sumbu: 3, Penggerak Utama Jumlah sumbu: 3 Weeke Optimat BHP Vantage 24M 3-sumbu ini diproduksi pada tahun 2011. Sebagai pusat pemrosesan CNC yang tangguh, mesin ini menawarkan presisi dan efisiensi untuk berbagai tugas pengerjaan. Manfaatkan kesempatan untuk membeli pusat pemrosesan CNC Weeke Optimat BHP Vantage 24M ini. Hubungi kami untuk informasi lebih lanjut. Njdpfx Aox D D Ttjgljkt Jenis Aplikasi Pemrosesan Kayu CNC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.035 mm, jarak lintasan sumbu Y: 1.720 mm, jarak gerak sumbu Z: 380 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Kami menawarkan pusat pemesinan Weeke Optimat BHC 550 siap pakai tahun pembuatan 2003 ini. Nkodpsx Nw Drefx Aglet

Kondisi: bekas, nomor mesin/kendaraan: 008205, Arbeitsbereich Achse X: 4250 mm Arbeitsbereich Achse Y: 1320 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 31 Anzahl Werkzeugplätze: 22 Nksdpfjx A Th Rsx Agljt

Kondisi: bekas, nomor mesin/kendaraan: 008170, a1 Nkedpfxsx A Tcuo Aglst

Kondisi: bekas, nomor mesin/kendaraan: 007601, Working area X-axis: 4320 mm Working area Y-axis: 2245 mm Working table: Nesting table Nksdpfxsu N Skfe Agljt Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 16 Number of tool positions: 8

Kondisi: bekas, nomor mesin/kendaraan: 008166, chq1ahua Nsdjx A Hdrspfx Aglskt

Kondisi: bekas, nomor mesin/kendaraan: 006351, Arbeitsbereich Achse X: 4250 mm Nkedpfx Aewcyfljgljt Arbeitsbereich Achse Y: 1250 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 15 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 31 Anzahl Werkzeugplätze: 36

Kondisi: bekas, nomor mesin/kendaraan: 008088, Area kerja sumbu X: 3700 mm Area kerja sumbu Y: 2100 mm Meja kerja: meja nesting Daya spindle utama: 9 kW Jumlah sumbu terkontrol: 4 sumbu Jumlah spindle bor: 31 Jumlah posisi alat: 14 Nodpfx Agex A Hbqjlokt

Kondisi: bekas, nomor mesin/kendaraan: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Positioning via NC control: yes Njdpfx Aspl Hvdogljkt Lateral horizontal groups: yes

Kondisi: bekas, nomor mesin/kendaraan: 007716, Working area X-axis: 3250 mm Nkjdewuz N Nepfx Aglet Working area Y-axis: 1220 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool stations: 16

Kondisi: bekas, nomor mesin/kendaraan: 005289, Area kerja Sumbu X: 7400 mm Area kerja Sumbu Y: 1550 mm Meja kerja: Meja nesting Daya spindle utama: 11 kW Jumlah sumbu terkontrol: 4 sumbu Nsdpfx Aswcyacegljkt Jumlah spindle bor: 10 Jumlah tempat alat: 14

Kondisi: bekas, nomor mesin/kendaraan: 006158, Maximum panel width: 1000 mm Maximum panel length: 2500 mm Nksdpfx Agoiwptusljt Number of injectors: 14 Positioning via NC control: yes

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical Specifications: • Year of manufacture: 2008 GUIDEWAY AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive on X-axis, ballscrew drive on Y- and Z-axes • Travel distances of the axes: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: Nkjdpjwx Iidofx Aglot - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) Optimat BHC200 • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changers o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for woodworking, plastics, and light metals • Condition: good; very well maintained, serviced regularly / last maintenance 03/25 • 10/2022 – Modernization measures: - New industrial machine computer / Siemens Industrial PC - woodWOP 8 / Windows 10 upgrade Advantages of the HOMAG BHC200: • Precise and efficient machining for a variety of materials • Ideal for joineries, furniture manufacturers, and custom projects • Reliable performance, even for demanding applications Scope of delivery: • Machine + Industrial PC • Operating manual • CE-compliant safety and protection devices - Protective fences on the sides and rear - Three-section safety tread mat at the front allows workpieces to be loaded in the inactive work area. Inspection and test run on site are welcome! Dismantling and transport to be organized by the buyer.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Pusat pemesinan CNC Homag Weeke Optimat BHC Venture 3, tahun 2004, dijual! Nodpfxsx Ey H Is Aglskt

Kondisi: bekas, nomor mesin/kendaraan: 005796, Area kerja sumbu X: 3700 mm Nodjhwi U Tspfx Aglokt Area kerja sumbu Y: 1550 mm Daya spindle utama: 9 KW Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 10 Jumlah slot alat: 8

Kondisi: bekas, nomor mesin/kendaraan: 007400, Lebar panel maks.: 800 mm Panjang panel maks.: 1250 mm Jumlah injektor: 1 Posisi melalui kontrol NC: ya Nedpet Hmt Isfx Aglskt Kelompok horizontal samping: ya

Kondisi: bekas, nomor mesin/kendaraan: 007564, Working area X-axis: 3700 mm Working area Y-axis: 1550 mm Worktable type: Nesting table Main spindle power: 10 kW Number of controlled axes: 3 axes Number of drilling spindles: 12 Nkedpjum H Ekefx Agljt Number of tool changer positions: 13