Beli Weiler 160 Cnc bekas (205)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Ksdjvivmyjpfx Adqenc >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Turning diameter 330 mm Turning length 750 mm Control WEILER D 1 Center height 165 mm Distance between centers 750 mm Max. swing diameter over cross slide 160 mm Spindle bore 42 mm Spindle speeds 1 - 4500 rpm Kedpfxswi Ugqs Adqenc Spindle nose DIN 55027 size 5 Cross slide travel 180 mm Feeds X-axis mm/rev Feeds Z-axis mm/rev Rapid traverse X-axis 5 m/min Rapid traverse Z-axis 10 m/min Feed force X/Z-axis 3000 / 6000 N Tailstock quill taper MK 3 Tailstock quill diameter 50 mm Tailstock quill stroke 110 mm Total power requirement 10 kW Machine weight approx. 1.3 t Machine dimensions L x W x H 1.8 x 1.2 x 1.7 m Accessories: 3-jaw chuck SCHUNK 0 mmø, quick-change toolpost head, coolant system

Kondisi: bekas, Tahun pembuatan: 1982, Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Distance between centers: 500 mm Spindle speed: 15 - 3550 rpm Spindle nose: Size 5 (DIN 55022) Knedpfxsvxwlps Adqec Spindle bore: 36 mm Tailstock quill taper: MK 3 Tailstock quill stroke: 90 mm Tailstock offset: 500 mm Motor speed: 1440 / 2830 rpm Motor power: 3 / 2.2 kW Weight: 0.8 t Required floor space approx. 1.40 x 0.70 x 1.20 m Chuck guard with electric interlock Tool cabinet with various contents

Kondisi: bekas, Tahun pembuatan: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital readout, year of manufacture 1980, 4-jaw chuck, Multifix quick-change toolpost with 3 holders. The machine is in very good, ready-to-use condition and comes from a training workshop. Can be demonstrated under power by appointment. Knsdpfx Ajvx Sw Hedqsc

Kondisi: baik (bekas), Perfekte Hochleistungsmaschine für Döner-, Burger- oder Tierfutterfabriken. Knjdewlfxvepfx Adqsc

Kondisi: bekas, translated-tech-specs-001 Ksdpfjwrahxsx Adqjnc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, WEILER Condor 81 Centre Lathe with Lead and Feed Screw, 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet locking >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev Knjdpfx Adjtlu Sceqsc >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm, 40 pcs collets partly double >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre Safety features: >> Lead- and feed screw guard >> 2 emergency stop buttons >> Spindle brake About the machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with a guard for safety. A very robust and powerful machine. The Heidenhain 3-axis digital readout makes operation easier and more precise. The machine has been electrically and mechanically inspected by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: bekas, Swing diameter over bed / mm Knodpfx Aswgi Tmjdqoc Swing diameter over cross slide / mm Turning length / mm

Kondisi: baik (bekas), Tahun pembuatan: 2014, kapasitas pengeboran: 60 mm, penjepit spindle: MK 5, Manufacturer: WEILER MAS Model: VOM 50 Year of manufacture: 2014 Specifications Metric Arm length: 1,250 mm Max. drilling diameter (steel): 50 mm Max. tapping diameter: M48 Quill stroke: 350 mm Max. distance spindle – table: 1,555 mm Min. distance spindle – table: 305 mm Spindle speed: 800 rpm Tool holder: ISO/Bt/Mk 5 Column diameter: 400 mm Estimated Dimensions Length: 3,200 mm Width: 1,325 mm Height: 2,970 mm Weight: 6,750 kg Please note: The information on this page was provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contractual terms. We recommend verifying all critical details. Knjdpfx Adjwpkr Njqoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Leadscrew and Feed Rod Lathe Weiler Condor 81 *Partially Refurbished* Item Number: 04-03-141 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of manufacture: approx. 1986 L x W x H: approx. 2000 x 1000 x 1700 mm Weight: approx. 900 kg Kjdpfxowl At Ds Adqsnc Digital display: 3-axis digital readout Sino *New* Specifications: Max. swing over bed: approx. Ø340 mm Max. swing over cross slide: approx. Ø185 mm Max. turning length: approx. 800 mm Bar capacity: approx. Ø42 mm Spindle: Speed range: approx. 30–2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0 kW Automatic longitudinal & cross feeds: Feed range: approx. 0.016–0.50 mm/rev Thread cutting capability: Metric 0.18 – 28 mm, Imperial 80 – 1 TPI, DP threads 200 – 2 3/4 DP, Module 0.1 – 9 Tailstock: MT3 Accessories: 3-axis digital readout SINO *New* 3-jaw chuck 160 mm *New* Quick-change toolpost size E + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feed rod cover *New* Drill chuck *Optional* Live centre *Optional* Additional quick-change toolholders *Optional* Further accessories on request Price and further technical data on request

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Knedpfx Asvrckqjdqjc Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1983 Machine no.: 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose according to DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty, including operation manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 1 piece NEW 160 mm 3-jaw chuck, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard Ksdpfxowb Supo Adqenc >> Rear splash guard >> Coolant system >> Machine leveling feet About the machine: A used Weiler Condor 81 is offered here in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our premises.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe in Excellent Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake Knodpswkh Abjfx Adqoc >> Weight approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> New collet attachment, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: This offer is for a Weiler Primus GS lead and feed screw lathe in excellent original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in top condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake Ksdpsvrcqdefx Adqonc >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: Knedpfx Ajwrmuxsdqec >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Knsdjvkfhpspfx Adqsc Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Excellent Condition! Technical Specifications: >> Year of Manufacture: 1991 >> Machine No.: 91-160-2804 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: from 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet locking >> Tailstock: Morse Taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Imperial, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle Brake: switchable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Equipment: >> New 3-axis digital readout by K&C, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching >> Quick-action collet chuck, collets from 1 to 29 mm increasing by 1 mm >> NEW 160 mm 3-jaw chuck with jaws >> Multifix size A with 2 tool holders >> Electrical chuck guard >> Bed stop >> Rear splash guard >> Machine feet Knodpfx Ajwv S Ufodqjc >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe, built to toolmaker accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely disassembled and repainted in light grey. All slides run very smoothly and evenly. The Weiler operates quietly even at high spindle speeds. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be machined to a ground finish. You are welcome to inspect the machine under power on site and see the condition for yourself.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws Kjdpfovv Etvex Adqjnc >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: baru, Tahun pembuatan: 2022, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, Commodor 230 VCD Lathe – LIKE NEW CONDITION The Commodor series has been the benchmark for long-term precision for decades. These proven, high-quality, and powerful production lathes are designed for universal use in industry, toolmaking, trade, and training. Equipment: - Distance between centers: 1000 mm - Center height: 230 mm - Automatic handwheel disengagement - Leadscrew and feedshaft cover - Holding brake - Toolmaker accuracy per DIN 8605 - Frequency inverter and speed potentiometer for stepless speed regulation - High drive power at the main spindle - Wide thread cutting range - Digital speed display - User-friendly operation - LED machine lamp WORKING RANGE - Center height: 230 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Distance between centers: 1,000 mm SPINDLE - Spindle nose: DIN 55027/DIN ISO 702-3, Size 6 - Spindle bore: 56 mm - Spindle diameter in front bearing: 90 mm MAIN DRIVE - Drive power (60% / 100% duty cycle): – / 11 kW - Speed range: 25 – 2,000 rpm - Number of speeds: stepless FEED RANGE - Number of feeds: 320 - Longitudinal: 0.026 – 7.4 mm/rev - Cross: 0.013 – 3.7 mm/rev THREAD CUTTING RANGE - Metric threads: 0.3 – 80 mm TAILSTOCK - Quill diameter: 70 mm - Quill stroke: 150 mm - Internal taper: DIN 228, MK 4 ACCEPTANCE ACCURACY Kedpfx Adov Tv R Hjqsnc - DIN 8605 The WEILER screen display for the VCD series with constant cutting speed (V-constant): - 3-axis readout for bed, cross, and top slide - Direct speed input and display - Constant cutting speed - Freely selectable speed limit (lockable via key switch) - Spindle orienting stop - Tool technology memory for 99 tools - Power display in percent (graphic) and kW - Axis displays can be disabled via key switch (for training purposes) Accessories: - 250 mm Röhm 3-jaw chuck DURO-M, DIN 55027 - Fixed steadies - 5 pcs Multifix size B - Movable chip splash guard covers - Numerical position displays About the machine: For sale is a Weiler Commodor 230 VCD lathe in LIKE NEW CONDITION. The Weiler has 3 spindle hours. The machine is CE-compliant. Take advantage of the opportunity to inspect and test this machine under power at our site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Kedsv Tyzcopfx Adqenc Digital readout available at extra cost.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg Kedpfjvtp Edjx Adqonc >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps Kodpfx Aju Aftgjdqonc >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads Knedpfxowrm Dto Adqec About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 – 3,000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Ksdpou Afqlsfx Adqonc Accessories and Equipment: >> 2-axis Heidenhain digital readout >> 1 new 125 mm three-jaw chuck with 2 sets of jaws >> New collet chuck system with collets (new), range 3 mm to 25 mm in 1 mm increments >> Multifix size A quick-change toolpost with 3 tool holders >> Rear splash guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides operate very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and enables you to achieve ground-like finishes. Take the opportunity to view and test this machine under power on site to convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop Ksdpfx Adsvambcsqenc >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.