Beli Weiler Condor 81 bekas (204)

Kondisi: bekas, Tahun pembuatan: 1970, Weiler lathe with tailstock Fgedehtnu Topfx Alyjf

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible Fgodpfxsyylq Uj Alyef >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories & Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 toolholders >> Motor brake >> Bed stop About the Machine: This Weiler Matador VS-2 is offered in excellent condition. The machine is, of course, fully functional and has been newly repainted in light grey. It is a very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All linear scales are new and are equipped with protective covers to prevent contamination. All slides move smoothly and evenly. You are welcome to inspect the machine under power at our premises to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in Special Light Grey Paint Finish!!! Technical Specifications: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, 200-tool programming, taper calculation, radius/diameter mode, quick zeroing, count direction switching >> 1 three-jaw chuck (1 set of jaws) >> 1 four-jaw chuck (2 sets of jaws) >> Electronic spindle guard >> Multifix Size A quick-change toolpost with 2 tool holders Fjdjyylqhjpfx Alysgf >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A very well-presented machine. The K&C 3-axis digital readout was retrofitted. All scales are new and equipped with protective covers to guard against dirt. The slides run smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C, in Special Light Grey Paint!! Technical Data: >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> 3-axis digital readout by K&C, NEW, 12-month manufacturer's warranty including operating manual Fjdjyyb T Sepfx Alysgf Features: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power on-site and verify its condition for yourself.

Kondisi: baik (bekas), Tahun pembuatan: 1991, Machine type: Cycle-controlled lathe Manufacturer: WEILER Model: E30 Year of manufacture: 1991 Control system: Weiler Country of origin: Germany Additional information: Cycle-controlled lathe WEILER - E30 Technical details Max. turning diameter: 330 mm Turning length: 750 mm Control system: Weiler Centre height: 165 mm Swing diameter over bed: 330 mm Max. swing diameter over cross slide: 160 mm Cross slide travel: 180 mm Longitudinal bed slide travel: 395 mm Main spindle: Speed range - main spindle: 1 - 4,500 rpm Fedpfsr Dvqzsx Alyogf Drive power - main spindle: 9 / 11 kW Max. torque: 165 Nm Spindle nose: DIN 55027 / 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: ( - ) mm Tool turret: Type: MultiFix Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill stroke: 110 mm Quill diameter: 50 mm Tailstock taper: MK 3 Feeds: Rapid traverse: max. 10 m/min Feed force: 6 / 3 kN Feed range: 0 - 20 mm/rpm Thread cutting: Metric: 0.1 - 400 mm Inch: 1/4 - 56 TPI (G/1") Module: 0.125 - 28 mm.II DP: 1 - 224 TPI (.II) Max. number of thread pitches: 50 Total power requirement: 10 kVA Machine weight approx.: 1.5 t Space requirements approx.: 2.8 x 2.0 x 2.0 m

Kondisi: bekas, en Fedpfx Aloyg Rfioysgf

Kondisi: bekas, 1051de-lathe-desc-en Fodpfx Aleyah Rvjysgf

Kondisi: siap digunakan (bekas), Mesin Bubut L&Z WEILER LZ 330 termasuk indikator digital 3-sumbu baru (bekas institusi pendidikan) - Indikator digital 3-sumbu "BARU" - Ketinggian puncak 165mm - Diameter pembubutan di atas tempat tidur 330mm - Panjang pembubutan 800mm - Rentang putaran (girboks) 25-2800 rpm - Otomatis pakan membujur/muka - Dudukan dasar Multifix baru dengan sisipan - Chuck tiga rahang - Perlengkapan collet dengan 20x collet - Perangkat pemotong salinan asli - Berbagai perlengkapan tambahan - Dokumentasi Fgjdpfxjy Id Uhe Alyef Dimensi: P x L x T 1,8 x 0,7 x 1,6 meter / Berat 800 kg Kesalahan dan kekeliruan input dapat terjadi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Mesin Bubut L & Z / WEILER DA 210x1000 / Dengan Tampilan Digital 3 Sumbu Baru Fgsdsy H Ikqepfx Alysf - Tahun pembuatan 2005 - Penanda CE - Panduan dalam kondisi baik - DATA TEKNIS LENGKAP LIHAT FOTO - Tampilan digital tiga sumbu "BARU" - Perangkat penjepit collet pelepas cepat termasuk 79 buah collet (173E) - Dudukan dasar Multifix dengan sisipan - Chuck tiga rahang - Pelindung chuck elektrik - Pelindung geser tambahan - Perlengkapan pendingin - Chuck bor / senter putar - Dinding belakang penahan serbuk - Lampu kerja - Dokumentasi lengkap Ukuran: PxLxT 2,8x1,2x1,8 meter / Berat 1600 kg Kesalahan ketik/tulis dapat terjadi.

Kondisi: bekas, 1 Fedeyr R Dcepfx Alysgf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Fsdpfxsyaimfj Alysgf Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Kondisi: baik (bekas), Tahun pembuatan: 2008, Weiler DZ 40, tahun pembuatan 2008, kontrol Siemens 840 D, perjalanan X/Z 200/350 mm, diameter putar 180 mm, diameter lingkar maksimum Ø 560 mm, sumbu Y +/- 25 mm, sumbu Q / tailstock yang dapat diprogram, perjalanan sumbu Q 360 mm, sistem pengukuran sumbu Q rotatif, tailstock MK 4, spindle utama maksimum lubang batang 42 mm, lubang spindle 52 mm, rapid traverse X/Z/Q 30/30/20 m/menit, turret 16 posisi – semua posisi digerakkan, VDI 25, diameter shank 25 mm, alat berputar hingga 4.500 rpm, wadah bagian, aksesori, pemegang alat berputar, pemegang kaku. Fjdpfx Aey Ev Iujlyegf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, For sale: Lathe manufactured by Weiler, model Primus LZ-GS The machine is in very good condition. Fgjdsihig Iepfx Alysf Technical specifications: - Year of manufacture: 1989 - Machine No.: 4443 - Operating voltage: 380 V - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 gear steps - Spindle bore: 23 mm - Short taper spindle nose DIN 55027 - Tailstock Morse taper 2 - Feed rates: 0.03 to 0.15 mm/rev - Thread cutting: Metric, imperial, module, and diametral pitch - Metric thread pitch: 0.25 to 2.5 mm - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Prices plus VAT Inspection possible by appointment. Please contact us—our team is pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility, or do you want to sell yours? For more information or contact options, visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 410 mm, lubang spindel: 54 mm, kecepatan rotasi (maks.): 3.000 rpm, tinggi total: 1.800 mm, panjang total: 2.200 mm, lebar total: 1.500 mm, berat benda kerja (maks.): 700 kg, berat keseluruhan: 2.100 kg, For sale: Weiler lathe, model E35. Fgedpsxu Ehgefx Alyef The machine is in good condition and fully operational. Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Centre height: 200 mm Centre distance: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over cross slide: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix quick-change system Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions (approx.): 2,200 x 1,500 x 1,800 mm Weight (approx.): 2,100 kg Transport and loading can be organised Europe-wide for an additional charge upon request. Prices are excluding VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange welcome! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your workshop? Or are you planning to sell your equipment? For further information or contact options, please visit our website.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, FULLY REFURBISHED with Measurement Protocol certifying New Machine Tolerances Technical Specifications: >> Machine No. 2268-87 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose, DIN 55029, Camlock >> Tailstock: MT 4 >> Feed rates from 0.026 to 0.888 mm/rev >> Thread Cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread pitches from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Motor Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Features: >> New K&C 3-axis Digital Readout, 12-month Manufacturer Warranty with Operating Manual >> New 200 mm Three-Jaw Chuck with 2 sets of jaws >> New Multifix Size B with 3 tool holders >> Bed Stop >> Machine Mounts >> Coolant system >> LED Machine Lamp For safety, the machine is equipped with: >> Electronic Spindle Guard >> Spindle Brake >> 2 Emergency Stops Optional: Lead and feed screw covers About the Machine: Fsdpjymznhofx Alyjgf We are offering a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guideways have been newly ground and/or scraped. Acceptance in accordance with the inspection protocol. Painted in 2K high-gloss white. The Multifix quick-change toolpost and chuck are both new. Safety: The machine features a brake motor, electronic spindle guard and two emergency stop buttons, making it essentially as-new. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and enables production of surfaces with ground-like finish. Take advantage of the opportunity to view and test the machine under power on-site and confirm its condition for yourself.

Kondisi: bekas, lathe-DA2101-EN Fgodpeykca Hefx Alyjf

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 140 B Leadscrew and Feedshaft Lathe with Toolmaker's Precision, featuring NEW 3-Axis Digital Readout from K&C! Technical Data: >> Year of manufacture: 1989 Machine No. 89-140-1471 >> Center height: 140 mm >> Distance between centers: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting options: metric, inch, module, and diametral pitch threads >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Equipment and Accessories: >> NEW K&C 3-axis digital readout, 12-month manufacturer's warranty, includes user manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, rapid zeroing, count direction switching >> NEW collet chuck set, collets from 3 to 25 mm in 1 mm increments (NEW) >> 160 mm 3-jaw chuck with one set of jaws >> Multifix size A with 2 steel tool holders >> Faceplate >> Bed stop >> Rear cover >> Machine feet >> Electronic spindle guard >> Operating manual Safety features: Electronic spindle guard, leadscrew and feedshaft cover, 2 emergency stop buttons, spindle brake, electronic change gear door interlock Fgodpfx Alsymdymeyof About the machine: Offered is a Weiler Praktikant 140 B leadscrew and feedshaft lathe in very good condition. This very well-maintained lathe comes from a training workshop. All slides move smoothly and evenly. The Weiler also runs quietly even at high speeds. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, weiler-commodor-lead-and-feed-screw-lathe-with-3-axis-heidenhain -digital-readout-very-good-condition Fedpoylh Ncjfx Alyogf Technical specifications: >> Year of manufacture: 1991, Machine No. 3140 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 Size 6 with bayonet lock >> Tailstock Morse Taper 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake, switchable >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis Heidenhain digital readout >> 200 mm 3-jaw chuck with 2 sets of jaws >> Multifix toolpost size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet About the machine: For sale is a Weiler Commodor lathe in very good and fully functional condition. The machine comes from a government-owned facility where it saw only limited use. The Commodor is one of the largest manual lathes manufactured by Weiler—a very robust and powerful machine. The 3-axis digital readout by Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us, and a complete oil change has been performed. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Fsdpfowhzcpjx Alyogf Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out in particular due to its stepless speed control, which makes working on the already highly user-friendly machine even easier. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine and its condition at our premises. Availability: on request Machine no.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Threading options: Metric, Inch, Module, Diametral Pitch Metric thread pitch: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can carry out a complete or partial overhaul of your chosen machine - Upon request, we repaint your machine in your desired colour - Upon request, you can directly order further accessories such as tools, etc. - Upon request, we can fit additional accessories such as safety features, etc. - We are happy to take care of shipping and/or installation. Fedsq H D U Eopfx Alysgf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 Fgedpfx Aovivmyolyjf >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: Fgsdpfxsvrckqj Alyof >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 Fjdpfx Alevrcqdjyjgf >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: Fsdpov Tyzcjfx Alysgf >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: Fedpfxsvv Etvo Alysgf >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.