Bubut-konvensional-elektronik

WEILER MATADOR VS

Kondisi: siap digunakan (bekas), de-hu-001 Cgjdpfoxq Hhyjx Akaju

Kondisi: bekas, Tahun pembuatan: 1996, spindeldurchlass-80-mm-traub-tna400 Cgodpoxbtqvefx Akaju

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout Heidenhain ND 780 from training workshop!! Technical Specifications: >> Machine No. 7702, year of manufacture approx. 1990 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.012 to 0.9 mm/rev Cgedpfx Ajy T Hqcskasu >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Quick-clamping device, internal and external collets (see picture) >> 1 pc 3-jaw chuck, 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc bed stop >> Change gears >> Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The original location of the lathe was a training workshop. The machine comes with extensive accessories. Take advantage of the opportunity to view and test the machine under power on site to confirm its excellent condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 leadscrew and feedscrew lathe with 3-axis Elesta digital readout, from a training workshop! Technical specifications: >> Machine serial no.: 88-8115, Year of manufacture: 1988 >> Center height: 140 mm Cgedpfx Aoy Tmkvjkaju >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight: approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: >> 3-axis digital readout from Elesta >> Quick-change collet chucking system for internal and external collets (see picture) >> 1 pc. three-jaw chuck with 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine mounts/feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly at high speeds. The original location of the machine was a training workshop. The machine comes with an extensive range of accessories. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Kondisi: baru, Tahun pembuatan: 2026, Stepless electronic spindle speed: 40–4000 rpm Spindle taper: MT2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth set via digital depth display Cgsdpfx Ajby Swhjkaou Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase with frequency inverter, 230 V, 0.54 kW OPTION: Drilling package no. 2 - FELIX vice, jaw width 80 mm, max. opening 120 mm - Keyless drill chuck 1–13 mm, mount B16 - Morse taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN SUPPLY ANY PRODUCT FROM THE FLOTT RANGE! PLEASE REQUEST AN OFFER!

Kondisi: bekas, Tahun pembuatan: 1971, de-maschinenparameter-0001 Cgedpey Hxp Djfx Akaeu

Kondisi: bekas, Dijual mesin bubut bekas Weiler Matador. Tipe VS2 dengan transmisi presetel. Termasuk roda gigi pengganti dan set collet. Dalam kondisi fungsional yang baik. Ketinggian pusat: 140 mm Putaran di atas tempat tidur: 295 mm Jarak pusat: 500 mm Lubang spindel: 36 mm Kecepatan spindel: 15 - 3350 rpm Csdpjy Hi A Iefx Akaogu Inspeksi dalam kondisi terhubung listrik dapat dilakukan di 5023 Salzburg. Forklift untuk pemuatan tersedia.

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Cedpfxstrvzxe Akaogu Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm Cgodpfx Aeyylq Uskaju >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories & Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 toolholders >> Motor brake >> Bed stop About the Machine: This Weiler Matador VS-2 is offered in excellent condition. The machine is, of course, fully functional and has been newly repainted in light grey. It is a very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All linear scales are new and are equipped with protective covers to prevent contamination. All slides move smoothly and evenly. You are welcome to inspect the machine under power at our premises to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in Special Light Grey Paint Finish!!! Technical Specifications: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm Cgodsyylqhjpfx Akaeu >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, 200-tool programming, taper calculation, radius/diameter mode, quick zeroing, count direction switching >> 1 three-jaw chuck (1 set of jaws) >> 1 four-jaw chuck (2 sets of jaws) >> Electronic spindle guard >> Multifix Size A quick-change toolpost with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A very well-presented machine. The K&C 3-axis digital readout was retrofitted. All scales are new and equipped with protective covers to guard against dirt. The slides run smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Kondisi: baru, Centre distance ----- 750 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Motor power ----- 1.1 kW INCLUDES * Delta frequency inverter * Automatic longitudinal and cross feed * Thread cutting dial * 3-jaw chuck 125 mm Cedpeq E I Avjfx Akasgu * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Travelling steady rest * Back plate * Rear splash guard * Box with various tools Option * Stand/cabinet base

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C, in Special Light Grey Paint!! Technical Data: >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm Cgodpfx Asyyb T Sokaju >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> 3-axis digital readout by K&C, NEW, 12-month manufacturer's warranty including operating manual Features: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power on-site and verify its condition for yourself.

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Matador VS2, tahun pembuatan 1992, chuck tiga rahang, Multifix, pelindung cipratan belakang, pelindung chuck elektrik. Mesin dalam kondisi baik dan siap pakai, dapat didemonstrasikan dalam keadaan terhubung listrik setelah perjanjian. Cgjdpfsx Sqvgex Akaou

Tahun pembuatan: 1963, Kondisi: siap digunakan (bekas), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Csdpfxoh I Edvo Akaogu

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Jarak antara senter: 500 mm Tinggi senter: 160 mm Lubang spindle: 36 mm Kecepatan putar: 56 – 2000 rpm Dudukan tailstock: MK 3 Cgedpjypbypefx Akaeu Daya penggerak: 2,4 kW Berat: 650 kg Dimensi: 1.400 x 700 x 1.220 mm Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori tambahan tersedia atas permintaan!