Beli Weiler E 50 bekas (193)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop Gjdpjvv Etvefx Ahmjui About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: bekas, Diameter pembubutan di atas tempat tidur 370 mm Diameter pembubutan di atas suport 200 mm Panjang pembubutan 1000 mm Ketinggian center 185 mm Lubang spindle 56 mm Kepala lepas tipe MK 4 Putaran spindle 50 - 2000 rpm Daya penggerak 4,0 kW Berat mesin sekitar 1,4 t Kebutuhan ruang sekitar 2,3 x 1,1 x 1,3 m Mesin bubut dengan lead screw dan feed shaft Godpfxexfwcke Ahmjui Chuck tiga rahang 200 mm Pemegang pahat Multifix ukuran B 3 pcs kaset Multifix Perangkat pemutus darurat

Kondisi: bekas, nomor mesin/kendaraan: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42-2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck with 15 collets. Guodpsuqb Emefx Ahmsi The machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Tahun pembuatan: 2010, Kondisi: hampir baru (bekas), We offer the following accessories for the Weiler E30 lathe: 1 pc. Schunk faceplate 250 mm Price: €600 Spindle mount DIN 55027 size 5 2 pcs. Röhm faceplate 260 mm Price per piece: €650 Spindle mount DIN 55027 size 5 1 pc. Travelling steady Price: €450 2 pcs. Drive flanges Price per piece: €210 Gusdpfx Ajgabvnehmei Spindle mount DIN 55027 size 5 All items are in very good condition.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Gsdpfx Ahov D Ip Njmoui Geometric inspection with test report Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual - Used, as seen -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 270, lebar di tengah: 900 mm, tinggi pusat: 210 mm, kecepatan spindel (maks.): 3.000 rpm, Perlengkapan: Penandaan CE, RINCIAN TEKNIS Diameter ayun tempat tidur: 420 mm Tinggi pusat: 210 mm Jarak antara pusat: 900 mm Lubang spindle: 55 mm Kecepatan spindle: 4 - 3.000 rpm Gusdpey Rx A Ssfx Ahmoi DETAIL MESIN Pengoperasian: Teach-in Kontrol: CNC PERLENGKAPAN Tampilan digital (Weiler) Dokumentasi tersedia Tanda CE

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan Godpfx Ajw I A Uxehmjui

Kondisi: siap digunakan (bekas), Turn length 450 mm Swing diameter over bed 245 mm Swing diameter over cross slide 135 mm Spindle bore 23.0 mm Mount DIN 55021-4 Tailstock quill: 2 MT Quill travel 80.0 mm Spindle speed 60 - 3000 rpm Guedpfx Aszbc Daehmji Bed width 155 mm Total power requirement 1.2 / 1.5 kW Voltage 380 V Machine weight approx. 340 kg Dimensions L x W x H 1200 x 650 x 1330 mm From a vocational school (!) Especially suitable for precision turned parts The Primus series is the most compact precision centre lathe (engine lathe) from WEILER. It is considered a suitable machine for precise work in confined spaces in toolmaking, laboratories, and training workshops. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum vibration damping and durability. Equipment: - Robust centre lathe with leadscrew and feedshaft - 2-axis digital readout "D60-2V" - 3-jaw chuck - Swiveling chuck guard - Chuck key - MULTIFIX toolpost with 3 holders - Sliding tailstock - Control panel, front left - Infinitely variable feeds for longitudinal and cross slide - Pole-changing drive motor - Machine base - Rear chip and splash guard - Additional accessories such as collet chuck + collets, etc. - Emergency stop button on the front

Kondisi: siap digunakan (bekas), en001 Guodpfx Aszbc Dtohmoi

Kondisi: baik (bekas), Tahun pembuatan: 1989, 1 mesin bubut dan pembuat ulir bekas Merek: Weiler Tipe: Condor B Gjdjzuthhspfx Ahmjui Tahun Pembuatan: 1989 Data Teknis: Jarak antar pusat: 750 mm Tinggi antar pusat: 165 mm Diameter lubang spindel: 40 mm Kecepatan putar: 22 – 2800 RPM Kon dengan lubang tirus: MK 3 Daya penggerak: 1,6 / 3,2 kW Berat: 1040 kg Dimensi: 1.850 x 880 x 1.290 mm Dilengkapi dengan: Tampilan digital 3 sumbu Perangkat penjepit collet dengan tuas Pelindung chuck

Kondisi: bekas, Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Weiler / Contec (produksi lisensi) mesin bubut Matador, tahun produksi 1993, dengan tampilan digital Elesta 3-sumbu, chuck empat rahang, Multifix, pelindung percikan belakang, perlindungan chuck listrik. Mesin dalam kondisi baik, siap pakai, dan dapat didemonstrasikan dengan listrik sesuai kesepakatan. Gjdpfx Asxp Rvlehmoui

Kondisi: bekas, Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Weiler / Contec (produksi lisensi) mesin bubut Matador, tahun produksi 1993, dengan tampilan digital Elesta 3-sumbu, chuck empat rahang, Multifix, pelindung percikan belakang, perlindungan chuck listrik. Mesin dalam kondisi baik, siap pakai, dan dapat didemonstrasikan dengan listrik sesuai kesepakatan. Guodpfx Asxp Ru Uohmoi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments Gujdpfx Aju Aftgehmoi >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Godpfxevtp Ede Ahmeui

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm Guodpfx Ahjvivmyomoi >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: baik (bekas), Diameter putaran 160 mm Panjang putaran 500 mm Diameter putaran di atas alas 400 mm Diameter putaran di atas eretan atas 220 mm Spindel utama Diameter lubang spindel utama 51 mm Kecepatan putaran 5.000 RPM Diameter batang 42 mm Guodpfxozwpl Io Ahmoi Diameter chuck 160 mm Jumlah posisi alat 12 buah Langkah pinol 50 mm Dudukan senter putar MK 3 Langkah sumbu - x 250 mm Langkah sumbu - z 550 mm Total kebutuhan daya 30 kW Berat mesin sekitar 4.000 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Provisur Weiler 878 grinder, model 50hp. Mesin hebat untuk produsen burger, sosis, dan makanan hewan peliharaan. Dapat menggiling daging segar atau daging beku yang sudah diparut. Hopper diperpanjang. Gjdpfxjx Av Ruo Ahmeui

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Perangkat penjepit cepat tuas tangan Kecepatan putar 110 - 3600 rpm Kepala Multifix tipe A Gsdpezz Hz Iefx Ahmeui Collet penjepit

Kondisi: bekas, Panjang putar 500 mm Diameter putar di atas tempat tidur 297 mm Diameter putar di atas penyangga 160 mm Lubang spindle 36,0 mm Konektor DIN 55022 Gr. 5 Tailstock: 3 MK Jarak gerak pinol 90,0 mm Kecepatan putar 30 - 3550 rpm Kecepatan motor: 1410 / 2830 rpm Total kebutuhan daya 3,3 kW Gjdpjxacgdefx Ahmjui Tegangan 380 V Berat mesin sekitar 620 kg. Dimensi P-L-T 1420 x 700 x 1200 mm Dari sekolah kejuruan - kondisi sangat baik (!!) Secara rutin mendapatkan servis pabrik WEILER Sangat cocok untuk suku cadang bubut presisi menengah Perlengkapan: - Mesin bubut dengan lead screw/penggerak/penarik yang kokoh - Chuck KLOPFER empat rahang Ø 140 mm - Chuck KLOPFER tiga rahang Ø 140 mm - Dudukan collet dengan banyak collet - Pelindung chuck yang dapat dilipat - Kunci chuck - Dudukan pahat MULTIFIX A, dengan 3 sisipan baru - Tailstock dapat digeser - Panel kontrol, depan kiri - Feed otomatis untuk carriage dan cross slide - Motor penggerak bipolar - Dudukan mesin dengan pintu lemari (ruang penyimpanan) - Pelindung cip di bagian belakang - Tombol darurat NOT-Aus, kanan bawah - Kaki getar mesin - Manual pengoperasian asli

Kondisi: bekas, Tahun pembuatan: 1971, de-maschinenparameter-0001 Gjdpfx Ahsy Hxp Djmeui

Kondisi: baik (bekas), Tahun pembuatan: 1992, Mesin Bubut LZ WEILER Tipe: PRAKTIKANT 160 B Thn.1992 dengan indikator digital 3-sumbu Heidenhain, chuck 160 mm RÖHM, pemegang alat Multifix B, tailstock dengan senter, perangkat penjepit dengan collet 1 – 29,5 mm, sistem pendingin. Putaran di atas alas: 320 mm Putaran di atas support: 198 mm Gedpfx Ahjy Rpr Rsmsui Panjang pembubutan: 650 mm Lubang spindle: 40 mm Kecepatan spindle: 96 – 2500 rpm Info lebih lanjut lihat data mesin. Pemandu dalam kondisi baik, dokumentasi mesin tersedia.

Kondisi: bekas, Tahun pembuatan: 1999, Diameter putaran di atas landasan 330 mm Diameter putaran di atas penyangga 195 mm Panjang putaran 750 mm Tinggi antara titik di atas landasan 160 mm Jarak antara titik 650 mm Tampilan digital 3 sumbu HEIDENHAIN Lebar landasan 205 mm Lubang spindel 36 mm Dudukan spindel KK5 DIN 55027 Rentang kecepatan putar 48 - 2500 RPM Daya penggerak 3,0 kW Cakram empat rahang diameter 160 mm Dudukan pengganti cepat MULTIFIX Tipe A Kerucut penerima pada luncur penyangga MK 3 Diameter luncur 40 mm Langkah luncur 100 mm Tegangan operasi 400 V Total kebutuhan daya 3,2 kW Berat mesin sekitar 680 kg Ruang yang dibutuhkan sekitar 1,60 x 0,80 x 1,55 m !!! PERHATIAN !!! Kondisi TERBAIK !!! Mesin berasal dari sekolah kejuruan! - Pabrik - No.: 4432 - 3 sumbu tampilan digital HEIDENHAIN - Cakram empat rahang RHÖM - Dudukan baja pengganti cepat MULTIFIX - Perangkat collet termasuk collet Ø 8 - Ø 27 mm Gedpfszy Sb Dsx Ahmeui - Pelat datar Ø 250 mm - Bor chuck pengganti cepat - Titik tengah

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Mounting DIN 55022 size 5 Tailstock quill: 3 MT Quill travel 90.0 mm Speed range 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions (LxWxH) 1420 x 700 x 1200 mm From a vocational school - very good condition (!!) Regularly serviced by WEILER factory service Gjdpfxoxacirs Ahmsui Especially suitable for medium precision turned parts Equipment: - Robust lead- and feed-screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with a large range of collets - Hinged chuck guard - Chuck key - MULTIFIX tool holder size A, with 3x new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and top slide - Pole-changeable drive motor - Machine base with cabinet door (storage compartment) - Chip splash guard (rear panel) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Manufacturer: Weiler Model: Commador II Engine Lathe (L+Z Lathe) Year of manufacture: 1979 Dimensions (L x W x H): approx. 2500 x 1200 x 1800 mm Weight: approx. 1500 kg Technical Specifications: Max. turning diameter over bed: approx. Ø 380 mm Max. turning diameter over cross slide: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø 56 mm Spindle: Speed range: approx. 25 – 2000 rpm Spindle nose: A2 – 6 Drive power: approx. 4.0 kW Automatic longitudinal and cross feeds: Feed range: approx. 0.026 – 1.253 mm/rev Suitable for threads: – Metric: 0.35 – 12 mm – Inch: 44 – 2 TPI – Diametral pitch threads: 88 – 5 DP – Module: 0.2 – 4 Gujdelp Ircopfx Ahmoi Tailstock: MT 4 Without toolholder

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Spindle mount DIN 55022 size 5 Quill: 3 MT Quill travel 90.0 mm Spindle speed 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions L-W-H 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead and feed screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - Collet chuck with a large assortment of collets - Chuck key - MULTIFIX tool holder A, with 3 new tool inserts - Movable tailstock - Adjustable bed stop - Control panel, front left Gusdpfx Aexaccxohmji - Automatic longitudinal and cross feeds for facing and cross slide - Pole-changeable drive motor - Machine base with cabinet door (storage space) - Chip splash guard rear panel