Beli Weiler Matador bekas (176)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Tinggi pusat: 160 mm Jarak pusat: 650 mm Kecepatan spindle: 2.500 min-1 Multifix Kwjdpfx Agew Sn Irolet Kepala lepas Aksesoris

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test report Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual Kodpfx Agov D Ip Njljwt - Used, as seen -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1974, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Commodor Year of manufacture: 1974 - overhauled Newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Kjdpfxemgaddo Aglowt Geometric acceptance with inspection protocol Equipment: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Universal lead and feed screw lathe Brand: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted in RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard Kwjdpfxjhy Tdys Aglot - Quick-change tool post size A - Simple bed stop - Chip guard (rear wall) - Operating manual With warranty Sold as seen/used The machine is technically compliant with the state of the art at the time of manufacture.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Universal lead and feed screw lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted in RAL 7035 light grey Machine no.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new Kjdsg R S Rcopfx Aglowt - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip guard/rear splash guard - Operating manual - Used, as seen -

Kondisi: siap digunakan (bekas), 38193001 Kodpfx Ajx Hz N Heglewt

Kondisi: sangat baik (bekas), Weiler Ergodor Lathe Max. turning diameter over bed: approx. 320 mm Max. turning diameter over cross slide: approx. 160 mm Max. turning length: approx. 470 mm Bar capacity: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal and face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Thread cutting capability: - Metric: 0.20 - 12 mm - Inch: 80 - 2 TPI - Diametral pitch: 160 - 5.5 DP Kjdpfx Asq Ixxyeglewt - Module: 0.1 - 4

Tahun pembuatan: 1986, Kondisi: bekas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Kodpfx Agon Ard Doljwt

Kondisi: diremajakan ulang (bekas), Mesin bubut telah direkondisi total pada tahun 2025, ranjang dan rel dibubut ulang, seluruh mesin dihilangkan cat lamanya dan dilapisi bubuk baru, semua bagian dibongkar, dibersihkan dan dirakit ulang. Akhirnya mesin diukur ulang dan dibuat protokol pemeriksaan. Dilengkapi aksesori lengkap (13 pcs Multifix, banyak rahang pengganti, dll.). Dokumen asli dengan manual dan laporan perawatan juga tersedia! Kwjdpfxox D Ayls Aglst

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 180 mm, lubang spindel: 40 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 750 mm, gores kuas bulu: 110 mm, kecepatan rotasi (maks.): 2.800 rpm, kecepatan rotasi (min.): 22 rpm, daya: 5,5 kW (7,48 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Weiler Condor AC infinitely variable lathe Kwedpfx Agjruqzcelet

Kondisi: hampir baru (bekas), Tahun pembuatan: 1992, Lathe WEILER Precision Centre Lathe in Ergonomic Design The Weiler Ergodor is the first German ergonomically designed lathe. It creates a more humane workplace and helps prevent health issues. The main feature: the operator can use this lathe both standing and sitting. Technical Specifications Centre Distance: 470 mm Turning Length: 430 mm Centre Height: 145 mm Swing Diameter over Cross Slide: 160 mm Swing Diameter over Bed: 300 mm Spindle Nose: Short taper flange Bayonet Mounting DIN 55022 Size 5 or Camlock D1-ASA-4 Spindle Bore: 36 mm Internal Spindle Taper: DIN 55022 Size 5 Spindle Speeds: 30 - 3550 rpm (S) Speeds: 15 - 3550 rpm Brake Motor: 3 kW / Brake Motor: 1.5/3 kW Cross Slide Travel: 150 mm Top Slide Travel: 100 mm Feeds and Thread Pitches: Gearbox with 30 switchable steps, Section 2 1.5/3 kW - 38 Headstock Gear Ratio: 3 - 20 Longitudinal Feeds: 150 mm via change gears / 100 mm via timing belt Cross Feeds = 1/2 longitudinal feed values Metric Threads: 0.2 - 12 mm Module Pitches: 0.1 - 4 Dimensions (L x W x H): 1450 x 640 x 1500 mm Kodpfx Agsvgqu Hslowt Net Weight: 1000 kg Acceptance according to toolmaker’s accuracy DIN 8605-20 Built according to occupational safety regulations, Official Test No. A. EM 11 1545/80. Footprint: 1450 x 640 x 1500 mm

Kondisi: baik (bekas), Tahun pembuatan: 1991, Machine type: Cycle-controlled lathe Manufacturer: WEILER Model: E30 Year of manufacture: 1991 Control system: Weiler Country of origin: Germany Additional information: Cycle-controlled lathe WEILER - E30 Technical details Max. turning diameter: 330 mm Turning length: 750 mm Control system: Weiler Centre height: 165 mm Swing diameter over bed: 330 mm Max. swing diameter over cross slide: 160 mm Cross slide travel: 180 mm Longitudinal bed slide travel: 395 mm Main spindle: Speed range - main spindle: 1 - 4,500 rpm Drive power - main spindle: 9 / 11 kW Max. torque: 165 Nm Spindle nose: DIN 55027 / 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: ( - ) mm Tool turret: Type: MultiFix Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill stroke: 110 mm Quill diameter: 50 mm Tailstock taper: MK 3 Feeds: Rapid traverse: max. 10 m/min Feed force: 6 / 3 kN Feed range: 0 - 20 mm/rpm Thread cutting: Metric: 0.1 - 400 mm Inch: 1/4 - 56 TPI (G/1") Module: 0.125 - 28 mm.II DP: 1 - 224 TPI (.II) Max. number of thread pitches: 50 Total power requirement: 10 kVA Machine weight approx.: 1.5 t Space requirements approx.: 2.8 x 2.0 x 2.0 m Kodpfxsr Dvqzs Aglewt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1977, Mesin Bubut Mekanik Merek: WEILER Model: MDU 260 Tahun pembuatan: 1977 - sudah diuji bengkel No. mesin: 14942 Tinggi senter: 125 mm Lubang spindel: 28 mm Perlengkapan: - Pelindung chuck elektris - Chuck 3 rahang Ø 140 mm Kjdpfxoxv A I Ts Agljwt termasuk set rahang putar termasuk set rahang bor - Chuck 4 rahang Ø 140 mm termasuk set rahang putar termasuk set rahang bor - Kunci chuck pengaman - Perangkat penjepit manual - Set collet W28 (366E) - Set (25 pcs) collet W28 (366E) ukuran 1,0-25,0 mm naik 1,0 mm - Pusat tetap untuk headstock W28 (366E) - Pemegang pahat quick-change, badan utama ukuran A - Buku manual pengoperasian Bekas, dijual sesuai kondisi tanpa garansi Kondisi teknis mesin sesuai standar tahun pembuatannya.

Kondisi: baik (bekas), Mesin Bubut Lead & Feed Shaft WEILER PRAKTIKANT 800 R - Diameter putar di atas alas: 300 mm - Diameter putar di atas dudukan: 150 mm - Panjang putar: 800 mm - Lubang spindle: 42 mm - Rentang kecepatan putar: 40 - 2000 rpm - Otomatis pakan memanjang / melintang - Ulir / Metrik / Inci, dll. - Tailstock MK 3 Kwjdpfx Agjx A Uktelet - Chuck tiga rahang - Dinding pelindung serpihan + lampu kerja - Wadah serbuk serpihan - Roda gigi ganti - Lemari alat - Dokumentasi Dimensi: PxLxT 1,8 x 0,8 x 1,6 meter / Berat 750 kg Kesalahan/kekeliruan entri dapat terjadi.

Kondisi: baik (bekas), Leit & Zugspindel Mesin Bubut WEILER CONDOR - Cat asli - Ketinggian center 165 mm - Diameter putar di atas ranjang 330 mm - Diameter putar di atas support 170 mm - Jarak antara center 800 mm - Kecepatan spindle 24 - 2800 rpm - Otomatis feed memanjang / melintang - Lubang spindle 38 mm - Tailstock MK 3 - Perlengkapan collet + 17x collet - Chuck tiga rahang - Multifix dengan insert - Pelindung chuck elektrik - Pelindung serpihan belakang - Lampu kerja - Berbagai aksesori - Dokumentasi Dimensi: P x L x T 1,8 x 0,9 x 1,6 meter / Berat 800 Kg Kodpox A D Ubefx Agljwt Kesalahan penulisan dan input dapat terjadi

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Kedsw I A Uxopfx Aglowt Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: sangat baik (bekas), Swing diameter over bed 330 mm Centre distance 750 mm Spindle speeds 1–4,500 rpm Control: WEILER C3 Various accessories Kwsdpfx Aeud Naqsglet MARCELS MACHINEN CH

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm Kwodpfou Aftgex Agljt >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible Kwodpovtp Edofx Aglot >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Kjdpfx Ajvkfhpjgljwt Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) Kjdpsvivmysfx Aglewt About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Kwjdpjxcuazefx Aglet Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm Kjdpfx Agsw Idllolowt >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: Ksdpjwrmuxefx Aglewt For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Kwsdpfx Agew Nw Dqelot Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.