Beli Wf bekas (667)

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 570 h, kapasitas angkut: 1.000 kg, tinggi angkat: 1.550 mm, pengangkatan bebas: 1.500 mm, tipe tiang: standar, tinggi konstruksi: 1.965 mm, panjang garpu: 1.150 mm, berat kosong: 748 kg, jenis penggerak: Elektro, lebar konstruksi: 810 mm, High-lift stacker Load center: 600 mm Fork width: 170 mm Fork thickness: 60 mm Mast type: Mono Condition: Ready for use and fully functional Technical condition: Good Front tires type: Polyurethane Front tires condition: 80 - 100% Gkedpjt Ddtgsfx Adqsc Rear tires type: Polyurethane Rear tires condition: 80 - 100% Battery voltage: 24V Battery capacity: 160Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Impulse control, Non-marking tires,

Kondisi: bekas, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Gkedec Tt Hrjpfx Adqec Travels: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 rpm Accessories: Angle table, coolant system, various tool holders

Kondisi: bekas, Tahun pembuatan: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm Table clamping surface 1000 x 500 mm Spindle taper SK 40 Control HEIDENHAIN TNC 150 Spindle speeds 31.5 - 3150 rpm Feeds - longitudinal/cross/vertical 1 - 3000 mm/min Rapid traverse longitudinal and cross 6 m/min Rapid traverse vertical 4 m/min Quill stroke 110 mm Distance spindle nose to table max. 559 mm Table load capacity max. 500 kg Total power requirement 14 kW Machine weight approx. 3.1 t Machine dimensions L x W x H 2.15 x 1.8 x 2.15 m Gsdpjtqqplefx Adqekc Accessories: Vertical head with hydraulic tool clamping and extendable quill, fixed table, coolant system

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Universal tool milling machine Brand: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, freshly repainted RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric acceptance with test protocol Accessories: - HEIDENHAIN TNC 124 traverse control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probe for workpiece position detection for determining workpiece reference points for measuring finished parts incl. Weldon tool holder SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) swivels in 3 axes rotatable 360° (displayed digitally as 4th axis in the control) tiltable +/- 30° tilt range towards the machine: 45° tilt range away from the machine: 15° Centring bore Ø 32 mm table load capacity: 150 kg - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant device - Splash guard cabin, traversing, electrically locked - Operating manual Gksdpfxjm Nbwts Adqoc Used, as seen The machine is technically according to the state of the art of its year of construction.

Kondisi: sangat baik (bekas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot pitch: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step ratio: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travels Gkjdpfxolnfggj Adqoc Longitudinal travel of clamping table (X-axis): Automatic: 400 mm Cross travel of clamping table (Y-axis): Automatic: 400 mm Vertical travel of clamping table (Z-axis): Automatic: 385 mm No guarantee is given for the accuracy, completeness or currency of the information provided.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Make: Kunzmann Model: WF5/3 Year of manufacture: 1990 X-axis travel: 500 mm Y-axis travel: 360 mm Z-axis travel: 420 mm Clamping surface: 700 x 350 mm Tool holder: SK40 Spindle bore: 22 mm Gjdeffyfrepfx Adqjkc Quill stroke: 60 mm Dimensions (approx.): W 1.50 x D 2.40 x H 1.90 m Weight (approx.): 1.6 t All information without guarantee. The machine is in very good condition. A demonstration is possible at any time in our exhibition hall.

Kondisi: baik (bekas), Horizontal milling device – counterholder for KUNZMANN milling machines, series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124. Two units available. The original price from Kunzmann is over €2,000 + VAT. With an appropriate adapter plate, it should also fit other Gkodpovr Stusfx Adqsc machines, e.g. EMCO, MIKRON, DECKEL, FPS, etc. Net price ex works

Tahun pembuatan: 2024, Kondisi: bekas, Grinding wheel mount: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Speed of diamond/CBN wheel spindle: steplessly adjustable 100 - 1000 rpm Grinding wheel radius: 0-30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Dressing wheel rotational speed: 200 - 2000 rpm Oscillation stroke of dressing wheel: 0-70 mm Dressing wheel motor power: 2.2 kW Weight approx.: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm Description: Suitable for truing and profiling diamond and CBN grinding wheels. Accessories: Full enclosure Grinding wheel motor, heavy-duty version with 4 kW Dressing wheel motor, heavy-duty version with 2.2 kW 2 machine lamps 12 V Glass linear scale on X and Z axes 2/3" camera system with 17" LCD monitor (microscope with 15-120x zoom) High-performance angle measuring device (0.05°) Diamond/CBN wheel spindle steplessly adjustable 100 - 1000 rpm Dressing wheel speed steplessly adjustable 200 - 2000 rpm Stepless oscillation stroke speed Automatic central lubrication Godpfx Adjlfil Seqskc SIC manual dressing wheel.

Kondisi: baru, konfigurasi gandar: 3 gandar, panjang ruang muatan: 13.500 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.500 mm, volume ruang muat: 87 m³,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2011, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 410016 with warranty Geometric acceptance with test protocol Accessories: - HEIDENHAIN TNC 320 path control - HEIDENHAIN HR 410 electronic handwheel - Preparation kit for probe TS 220 with mounting taper on the control panel and spindle lock - Fixed table 650 x 375 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant device - Splash guard cabin, travelling, electrically interlocked - Left side panel of the splash guard cabin removable, electrically interlocked - Control panel on the base - Operating instructions Godpfxevdrx Ue Adqskc Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Kondisi: bekas, Typ SI 15 WF Abmessungen des Schiebeschlittens: 2700 x 2300 mm Schlittenhub: 2600 mm Max. Anschlagschienenlänge am Sägeblatt: 900 mm Sägeblattdurchmesser: 400 mm Gkedpfx Asitvd Ijdqsc Sägeblattneigung: 0–45° Tischgröße: 1150 x 630 mm Hauptspindeldurchmesser: 30 mm Hauptmotor: 11 kW, 380 V Maximale Schnitthöhe: 140 mm Transportmaße (L x B x H): 2700 x 1800 x 1200 mm Gewicht: 820 kg Preis: 1.200 EUR (EXW Jonava, Litauen)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size: 1,100 x 600 mm Table load: 450 kg Speed range: 6,500 rpm Spindle mount: SK 40 Tool changer: 24-fold Gkodpfx Astdfbmjdqoc Control: Siemens 840 D Total power: 20 kW Machine weight: 5,500 kg Space requirement (W x D x H): 2.3 x 3.1 x 2.3 m Condition: very good

Kondisi: bekas, Tahun pembuatan: 1995, Travel X-axis: 300 mm Travel Y-axis: 200 mm Travel Z-axis: 350 mm Table clamping surface: 700 x 270 mm Main spindle taper: ISO 40 Spindle speeds 8: 150 - 1660 rpm Speed range - horizontal (8): 110 - 1230 rpm Feeds, 8 steps: 25 - 285 mm/min Weight: 900 kg Quill stroke: 60 mm Godpsvxllkjfx Adqskc Total power requirement: 3.7 kW Dimensions (L x W x H): 1.3 x 1.38 x 1.65 m Universal tool milling machine with 2-axis digital readout and swiveling vertical milling head with quill, fixed and swiveling table, slotting device with stroke rates of 43, 59, 84 per minute, automatic feeds and rapid traverse in all three directions. The machine comes from a repair workshop. The digital readout displays 2 axes, as the indicator for the third axis (top) is defective. All three linear scales are fully functional, and you can select which of the three axes should be connected. This is a used item; therefore, we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Tahun pembuatan: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain path control TNC 128 Travel X/Y/Z = 610/400/450 mm Spindle speed 1-4500 rpm Power 8.5 kW at 100% duty cycle Spindle taper SK40 DIN 69871 (Form AD) with pull stud DIN 69872 Fixed angle table 800 x 425 mm, 6 x 14 H7 T-slots Coolant system 66 liters Electronic handwheel HEIDENHAIN HR 510 FS Further technical data available upon request. Gkodpfeuf Sv Dsx Adqoc The machine is located at our premises in 71334 Waiblingen-Beinstein, available immediately, and can be inspected by arrangement. Please contact us in advance to schedule a visit.

Tahun pembuatan: 2006, Kondisi: baik (bekas), Universal tool milling machine Manufacturer: KNUHT, Model: WF 5, Year of manufacture: 2006, equipped with 3-axis digital readout, infinitely variable feeds, hydraulic tool clamping. Table size: 800 mm x 300 mm, maximum load capacity: 350 kg. Travel (X/Y/Z): 450/400/320 mm Spindle taper: ISO 40 Spindle speeds: 63 - 3150 rpm Infinitely variable feed rate: 5–1,250 mm/min Gkedpfx Aoichr Ssdqjc Rapid traverse: 1,800 mm/min Space requirements: 1.7 m x 1.7 m x 1.9 m, Weight: approx. 1,800 kg. Machine documentation available, machine ready for demonstration under power.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with inspection protocol Accessories: Gkedpfxshikrrs Adqoc - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as seen -

Kondisi: baik (bekas), Tahun pembuatan: 2007, X-axis 400 mm Y-axis 350 mm Z-axis 400 mm Spindle speed 4000 rpm Table length 650 mm Gkodpfxohuz T Ds Adqjc Table width 350 mm Table load capacity 250 kg Feed, X-axis 5000 mm Feed, Y-axis 5000 mm Feed, Z-axis 4000 mm Quill travel 60 mm Rapid traverse speed 0 – 2000 mm Length x Width x Height 1500 x 1800 x 1900 mm Weight 1500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 560 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 4.000 rpm, lebar meja: 750 mm, panjang meja: 425 mm, TECHNICAL DETAILS Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 500 mm Vertical travel (Z-axis): 400 mm Table dimensions: 750 x 425 mm Control system: Heidenhain Godou U Dyaopfx Adqekc Drill head Drill head mounting: ISO40 Speeds: max. 4,000 rpm MACHINE DETAILS Length (L-R): 2,430 mm Depth (F-B): 2,100 mm Height: 1,855 mm Weight: 2 t

Kondisi: bekas, Tahun pembuatan: 1980, X-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 – 2240 rpm Infinitely variable feed: 1 – 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Heidenhain TNC 131 control, tilting device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping of all axes; the working axis is automatically released, all axes can be released for manual operation. Gsdocxxq Djpfx Adqskc

Kondisi: hampir baru (bekas), Machine as new from laboratory X-axis travel: 400 mm Y-axis travel: 320 mm Z-axis travel: 400 mm Control: Heidenhain TNC124 Table size: 650 x 350 mm Tool holder: SK 40 Spindle speeds: 0–4,000 rpm Gkjdpfou Nnaiex Adqoc Quill stroke: 60 mm Vertical head swivel: 90 degrees Total power requirement: 5.0 kW Machine weight: approx. 1.3 t Space required: approx. 2.00 x 2.00 x 2.00 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Travel paths X/Y/Z 600/600/460 mm, 21 spindle speeds from 31.5 to 3150 rpm, motor 4.0 kW, spindle ISO 40, Heidenhain TNC 155 control, table size 900x550 mm, hydraulic tool clamping, rapid traverse, tilting rotary table with indexing, horizontal milling attachment, machine lamp, coolant system, splash guard, leveling feet, operating manual, excellent condition Godpfx Adspcf D Ieqekc

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Gkjdpfx Adsub R R Sjqec Year of manufacture: 1999 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 343006 with warranty Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on base - Operating manual Used as seen The machine is technically in accordance with the standard of its year of construction.

Kondisi: bekas, Heidenhain Aktiv digital display Infinitely variable feed Lamp Coolant system Travel distances X / Y / Z: 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Feed in 3 axes: 0 - 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Gkedpjcmzzgjfx Adqjc Vertically/horizontally extendable quill Dimensions approx.: 1.2 x 1.2 x 1.6 m

Kondisi: bekas, Tahun pembuatan: 1989, nomor mesin/kendaraan: 6766, Travel X-axis: 560 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Gksdpocxxpqefx Adqsc Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rate x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Required space approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light

Kondisi: bekas, z-travel: 380 mm y-travel: 400 mm x-travel: 500 mm Tool holder: SK 40 Swiveling vertical head: 90 degrees to either side Table size (LxW): 700x425 mm Required space approx.: 2x2x2 m Quill stroke: 60 mm T-slot width: 14H7 mm Gsdpfecxxmqsx Adqokc T-slot spacing: 63 mm Machine weight approx.: 2 t Total power requirement: 10 kW Speed range of driven tools: 5 - 3000 rpm Max. table load: 250 kg Number of T-slots: 6 Drive power – milling spindle: 5.5 kW