Beli Wmw Bt 2 bekas (464)

Kondisi: bekas, Technical Details: Psdpfx Abou N Ezdo Isrd Diameter: 375 mm Passage: 140 mm Width: 95 mm Machine weight approx.: 65 kg 3-jaw chuck with external jaws with flange mount, size Ø 375 x 20 mm; 2x adjustment bores Ø 24 x 15 mm, pitch circle Ø 173 mm; 3x clamping bolts Ø 26.5 x 60 mm, pitch circle Ø 174 mm Turning range min./max.: Ø 100 / Ø 310 mm Equipment: 1x chuck key

Kondisi: bekas, Technical details: X-axis travel: 450 mm Y-axis travel: 150 mm Z-axis travel: 400 mm Distance column to table edge, min./max.: 100 / 250 mm Spindle speed range: 25, 44, 78, 130, 228, 400 / 6 steps rpm Feed rate X/Y: 10 - 100 / 8 steps mm/min Table size: 990 x 300 mm Clamping surface: 800 x 195 mm Table swiveling range +/-: 30° Total connected load: not specified kW Approx. weight: 1200 kg Dimensions (LxWxH): approx. 1.5 x 1.3 x 1.5 m Horizontal milling machine, currently fitted with a tool arbor Ø 32 mm and a gear milling cutter. Machine vice included. Prodsu Nc Nlspfx Ab Ied

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Psdpfx Aeu Nfvujb Isrd Manual counter In stock

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390/455 mm Cross feed: 0.3–3.5 mm Table traverse: longitudinal 1150 mm Table speed: 2.5–25 m/min Table size: 2120 x 600 mm Magnetic chuck size: 1000 x 315 x 100 mm Table clamping surface: 1160 x 315 mm Grinding spindle feed: 0.002 – 0.05 mm Distance table to spindle center: max. 550 mm Overhang of the spindle head: 200–580 mm Grinding spindle speed: 1500 / 3000 rpm Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. LxWxH: 1.3 x 1.4 x 1.95 m Coolant system dimensions LxWxH: 0.7 x 0.7 x 0.55 m Prsdsu Nggzepfx Ab Iod - Coolant system (tank with pump) - 2 grinding wheel mounts - 4 machine feet as per manufacturer’s specification.

Kondisi: bekas, Tahun pembuatan: 1964, Technische Details: Wellendurchmesser: max. 120 mm Wellenlänge - max.: 800 mm Profilhöhe/Tiefe: max. 90 mm Schleifspindeldrehzahl: unbekannt U/min Tischgröße: Ø 150 mm Betriebsspannung: 380 V Gesamtleistungsbedarf: 1.1 kW Maschinengewicht ca.: 0.675 t Abmessung Maschine ca. LxBxH: 0.75 x 0.70 x 2.0 m Application: Vertical internal cylindrical grinding of shafts at the face, as well as center grinding using a shaft grinder Spindle head technical details: - Equipped with a shaft grinder Ø 13 mm, 60°; clamping element: Ø 6 mm, collet chuck - Adjustment travel: vertical 950 mm via handwheel, lateral (cross) 80 mm via hand crank - Diamond dresser, lateral adjustment: 80 mm Table additional information: - With fixed center 60° - Speed: 63 / 125 rpm - Vertical adjustment: 600 mm, usable height: 1,100 mm, manual operation Steady rest: Predpfxou Ngr Dj Ab Isd - Prism guide Accessories: - Fixed center L = 180 mm - Fixed center L = 300 mm - Various shaft grinders - Various clamping and auxiliary tools

Tahun pembuatan: 1948, Kondisi: bekas, en-uk Psdpfou Ng Tbsx Ab Iord

Kondisi: bekas, Technical details: Table length: 865 mm Table width: 780 mm Table height: 40 mm Height above floor: approx. 815 mm Machine weight approx.: 140 kg Required space approx.: 0.87 x 0.8 x 0.82 m Marking plate – spotting plate Prodpfx Abju Nkn Ao Ied Marking plate with 3 legs *

Kondisi: bekas, Technical details: Table length: 500 mm Table width: 500 mm Table height: 100 mm Height above floor level: 100 mm Machine weight approx.: 52 kg Space requirement approx.: 500x500x100 mm Pedpfxsu Nkp Ts Ab Ijrd

Kondisi: bekas, Technical details: Diameter: 250 mm Passage: Ø 80.0 mm Width: 80 mm Machine weight approx.: 18.0 kg Dimensions: Ø 250 x W: 112 mm Three-jaw lathe chuck made of steel Flange mount Ø 210 mm with 3 holes M12x44 Psdpfeu Nla Hjx Ab Isrd Including 1 set with 3 jaws *

Kondisi: bekas, Technical details: Pjdju Nlgmjpfx Ab Ierd Faceplate diameter: 318 mm Faceplate width: 56 mm Maximum through-hole: Ø 54 mm Weight: 17 kg Dimensions: Ø 318 x W: 101 mm Technical features: - Clamping jaws: 4 pieces, manual adjustment - Clamping range: external = max. Ø 280 mm, internal = min. Ø 40 mm

Kondisi: bekas, Technical Details: Prjdpsvgbdxjfx Ab Iod Drilling capacity in steel (diameter): 13 mm Throat depth: 160 mm Drilling stroke: 60 mm Spindle taper: MT2 Spindle speed: 210 - 2,580 / 16 steps rpm Feed: manual mm/rev Table clamping surface: 200 x 185 mm (fixed) Max. distance spindle/table: 620 mm Table clamping surface: 260 x 265 mm (adjustable) Distance spindle/table max.: 160 - 460 mm Rotating table: yes ° Table adjustment: 300 mm (hand crank) Column diameter: approx. Ø 70 mm Total power requirement: 900 Watts Approx. machine weight: 90 kg Approx. machine dimensions (LxWxH): 0.6 x 0.31 x 1.7 m The machine is equipped with a RÖHM 1-13 drill chuck including chuck key. Right-hand spindle rotation. Small machine vice included *

Kondisi: bekas, Technical details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame opening: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Prodpfou Icdyox Ab Isd Additional features: 2x bending rollers: - Ø 63 x 1080 mm - the top roller can be swiveled out - the bottom roller has an adjustment travel of 12 mm - manual drive via hand crank 1x running roller: - Ø 63 x 1080 mm - free-running - adjustment travel approx. 5 mm

Kondisi: bekas, en-001-techdata-2024 Prjdpfx Aou Icd Teb Ied

Kondisi: bekas, de-tsd-20240620-01 Prodsu Idp Dspfx Ab Ijd

Kondisi: bekas, Technical details: Drilling capacity in steel (diameter): 22 mm Throat depth: 205 mm Drilling stroke: 100 mm Predpfx Aevxf Ireb Ied Spindle taper: MT2 Spindle speed: 2-step rpm Feed: manual mm/rev Max. distance spindle/table: 150 - 600 mm Base plate clamping surface: 350 x 400 mm Table clamping surface: 360 x 280 mm Table rotatable: 360° Table height adjustment: 450 mm with hand crank Column diameter: Ø 100 mm Control voltage: 380 V Total power requirement: 0.8 kW Machine weight approx.: 270 kg Machine dimensions (LxWxH): approx. 0.6 x 0.5 x 1.95 m Column drilling machine incl. machine vice. In stock.

Kondisi: bekas, Technical details: X-axis travel: 1000 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Distance from column to table edge: min. 150 / max. 550 mm Spindle speed range: 28 - 1400 rpm / 18 steps Tool holder: SK40 Spindle head swivel: left/right 90°, forward/backward 45° Feed rate (X/Y axis): 16 - 800 mm/min / 18 steps Table size: 1600 x 400 mm Clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Approx. weight: 4000 kg Pedpsv Sz Diefx Ab Iord Machine dimensions (LxWxH): approx. 2.0 x 2.4 x 1.85 m Horizontal milling machine, retrofitted with vertical milling head *

Kondisi: bekas, Tahun pembuatan: 2001, translate-001 Psdexna Uzepfx Ab Ierd

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Psdpfx Asvbhv Rjb Iord Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, en-GB: Technical details: Sheet width: 1000 mm Sheet thickness: 1 mm Upright width: 1220 mm Blade length: 1030 mm Prsdpfx Abou Ibz Ro Iod Stroke adjustment - Upper beam: 100 mm Stroke adjustment - Bending box: 45 mm Max. bending angle: 140° Machine weight approx.: 0.65 t Machine dimensions approx. LxWxH: 1.8 x 0.6 x 1.1 m The folding bending machine is equipped with two rear supports. Size of the round bar support = Ø 25 x 750 mm with linear scale – left side with counterweight fr-FR: Détails techniques : Largeur de tôle : 1000 mm Épaisseur de tôle : 1 mm Largeur entre montants : 1220 mm Longueur de la lame : 1030 mm Réglage de la course - traverse supérieure : 100 mm Réglage de la course - tablier de pliage : 45 mm Angle de pliage max. : 140° Poids de la machine env. : 0,65 t Dimensions de la machine env. Lxlxh : 1,8 x 0,6 x 1,1 m La plieuse à tablier pivotant est équipée de deux butées arrière. Dimension du support en acier rond = Ø 25 x 750 mm avec règle graduée linéaire – côté gauche avec contrepoids pl-PL: Dane techniczne: Szerokość blachy: 1000 mm Grubość blachy: 1 mm Rozstaw stojaków: 1220 mm Długość noża: 1030 mm Regulacja skoku – belka górna: 100 mm Regulacja skoku – wanienka do gięcia: 45 mm Maks. kąt gięcia: 140° Waga maszyny ok.: 0,65 t Wymiary maszyny dł. x szer. x wys.: 1,8 x 0,6 x 1,1 m Krawędziarka segmentowa wyposażona jest w dwa tylnie podtrzymania. Wymiary podtrzymki prętowej = Ø 25 x 750 mm ze skalą liniową – lewa strona z przeciwwagą

Kondisi: bekas, Technical Details: Number of spindles: 4 Drilling capacity in steel (diameter): 30 mm Drilling stroke: 200 mm Drill spindle Morse taper: MT3 Spindle outreach: 350 mm Spindle distance, center to center: 490 mm Spindle head adjustment: 500 mm Feed rate: 0.07; 0.15; 0.25; 0.33 / 4-step mm/rev Feed: manual and automatic Spindle speed: 70 ... 1,600 / 8-step rpm Distance spindle/table: max. 430 mm Distance spindle/table: min. 180 mm Table surface: 1820 x 400 mm Pedpfx Aju Idt Nob Isrd Table adjustment: 250 mm with handwheel Total power requirement: 10.8 kW Machine dimensions (approx. LxWxH): approx. 1.0 x 2.1 x 2.8 m All spindle heads with clockwise and counterclockwise rotation Drilling heads 1 to 3: clockwise and counterclockwise rotation without threading function Drilling head 4: with automatic threading function, Röhm chuck up to Ø 33 mm All drilling heads and the table are height-adjustable. Equipment: Coolant supply internal diameter (i.d.)

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Prsdpfou Ndb Aex Ab Ied Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Milling beam extendable by approx. 350 mm. The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Prsdpfx Aju Ix Hqjb Iod Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Prjdpfx Aeu Nfwleb Ijd Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Good condition.

Kondisi: bekas, Technical details: Psdpju Ngn Sofx Ab Iord Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390 mm Table speed: 2.5–25 m/min Table clamping surface: 250 x 1000 mm Distance table to spindle center: 550 mm Grinding wheel dimensions: max. Ø 315 x 13–63 x bore Ø 75 mm Control voltage: 220 V / 50 Hz Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 3.35 x 1.5 x 2.10 m The machine is currently located in the technical department.

Kondisi: bekas, en Prsdpfxeu Ng Npe Ab Ied