Beli Wmw Bt 2 bekas (448)

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Kjdpfxju Nfinj Afijlr Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Ksdpfx Aeu Nfklefielr Throat depth: 400 mm Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Technical details: Faceplate diameter: 620 mm Ksdpju Nk Dwsfx Afislr Inner diameter: 160 mm Dimensions: 620x160x140 mm Machine weight approx.: 160 kg Four-jaw Flange mounting/diameter: - Through hole: 160 mm - Flange diameter: 197 mm - Bolt circle: 235 mm - Jaws are individually guided. - Supplied with chuck key The above specifications are approximate values!

Kondisi: bekas, en: Technical details: Diameter: 250 mm Passage: Ø 80 mm Width: 106 mm without flange Machine weight approx.: upon request kg Dimensions: Ø 250 x W: 140 mm Three-jaw chuck made of steel - incl. chuck key - incl. 2 sets of 3 jaws - Flange: size Ø 250 x 26 mm; attachment with 4 clamping bolts on bolt circle Ø 170 mm fr: Détails techniques : Diamètre : 250 mm Alésage : Ø 80 mm Largeur : 106 mm sans bride Poids de la machine env. : sur demande kg Dimensions : Ø 250 x L : 140 mm Mandrin à trois mors en acier - incl. clé de mandrin - incl. 2 jeux de 3 mors - Bride : taille Ø 250 x 26 mm ; fixation par 4 boulons de serrage sur cercle de vissage Ø 170 mm nl: Technische gegevens: Diameter: 250 mm Kledeu Nlatspfx Afier Doorgang: Ø 80 mm Breedte: 106 mm zonder flens Machinegewicht ca.: op aanvraag kg Afmetingen: Ø 250 x B: 140 mm Drieklauwplaat van staal - incl. sluitingssleutel - incl. 2 sets van 3 klauwen - Flens: maat Ø 250 x 26 mm; bevestiging met 4 spanbouten op steekcirkel Ø 170 mm

Kondisi: bekas, Technical details: Kjdpfx Aeu N D H Ejfislr Plate length: 205 mm Plate width: 195 mm Plate thickness: 65 mm 14 plates available T-slots in accordance with DIN 650 for T-slot nuts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Kondisi: bekas, Technical details: Diameter: 250 mm Kedpfx Asu Nla Hofiolr Passage: Ø 80.0 mm Width: 80 mm Machine weight approx.: 18.0 kg Dimensions: Ø 250 x W: 112 mm Three-jaw lathe chuck made of steel Flange mount Ø 210 mm with 3 holes M12x44 Including 1 set with 3 jaws *

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Klodpfju N Ddwex Afier Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, en-Technische Details: Plate length: 7040 mm Plate width: 2230 mm Plate height: 330 mm Machine weight approx.: 12,800 kg per piece 2 cast steel plates available for sale. Surface finish: planed T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28mm, and distance between T-slots: 305mm The plates are equipped for side clamping/connection. Through holes: 11 pieces, Ø 28mm, continuous, with counterbore Ø 600mm x 260mm, and 12 pieces, Ø 28mm, continuous, with counterbore Ø 114mm x 270mm. Our price is per plate. Kledpfsu N Dl Isx Afijr

Kondisi: bekas, Technical details: Plate length: 385 mm Kodpfou N D Hrox Afielr Plate width: 205 mm Plate thickness: 65 mm 8 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9; b = 24.2; c = 9.8; h = 19.9 mm

Kondisi: bekas, Technical Details: Plate length: 255 mm Plate thickness: 65 mm 4 plates available Klodpfx Aou N D Icjfisr T-slots according to DIN 650 for T-slot bolts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Kondisi: bekas, Technical details: Kodpfx Afju N Ec Ueiolr Width: 200 mm Depth: 300 mm Height: 500 mm Machine weight approx.: 38 kg per bracket 2 units available (price per unit)

Kondisi: bekas, Technical details: Drilling capacity in steel (diameter): 22 mm Throat depth: 205 mm Drilling stroke: 100 mm Spindle taper: MT2 Spindle speed: 2-step rpm Feed: manual mm/rev Max. distance spindle/table: 150 - 600 mm Base plate clamping surface: 350 x 400 mm Table clamping surface: 360 x 280 mm Table rotatable: 360° Table height adjustment: 450 mm with hand crank Kljdpsvxf Irjfx Afior Column diameter: Ø 100 mm Control voltage: 380 V Total power requirement: 0.8 kW Machine weight approx.: 270 kg Machine dimensions (LxWxH): approx. 0.6 x 0.5 x 1.95 m Column drilling machine incl. machine vice. In stock.

Kondisi: bekas, Technical details: Width: 500 mm Depth: 260 mm Height: 795 mm Approx. machine weight: 320 kg per unit 2 units available (price per unit) without T-slots Ksdpju S H Nljfx Afislr Base clamping slot (long hole): Ø 39 x 130 mm

Kondisi: bekas, Technical details: Width: 625 mm Depth: 520 mm Height: 820 mm Approx. machine weight: 300 kg per unit 2 units available (price per unit) without T-slots Long hole Ø 33 x 330 mm Ksdpfju S H Stex Afiolr *

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Kedpfx Aeu Ix Hqjfijlr Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Kjdpfx Aeu Ndb Asfislr Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Milling beam extendable by approx. 350 mm. The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: bekas, Technical details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Klsdpfx Afou N Dhijier Approx. machine weight: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Ram plate removed from a PYE 160S press - with central through-hole Ø 40 mm - with 6x pitch circle holes Ø 16 mm, pitch circle Ø 160 mm - diagonal T-slot according to DIN 650 (a = 19 mm; h = 25 mm; b = 38 mm; c = 16 mm) - with support plate underneath = spacing approx. 410 mm

Kondisi: bekas, Technical details: Width: 350 mm Depth: 120 mm without plate Height: 315 mm without plate Klsdpfju N Eczex Afisr 3 units available with base plate (A+B+C) 1 unit available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30 mm Price per unit

Kondisi: bekas, Technical details: Machine weight approx.: 160 kg Machine dimensions (LxWxH) approx.: 0.58 x 0.50 x 0.3 m Swiveling: no Rotary movement: 360 degrees Application: For auxiliary tasks, e.g., marking out divisions - Dividing head with clamping chuck Ø 370 mm with external 4-jaw clamping - Pitch circle with 15/16/17/18/19/20 divisions, 360°; 360° rotation Kjdsu N E Dxepfx Afislr - 360° rotation via radial scale

Kondisi: bekas, Technical details: Length: 1020 mm Width: 810 mm Height: 625 mm Approx. machine weight: 1070 kg Drilling cube made from cast steel. Surface with heavy drill inclusions. Kljdov Ddunopfx Afijr T-slots as per DIN 650 - Clamping surface vertical (LxD): 1020 x 625 mm - Clamping surface horizontal (LxW): 1020 x 810 mm

Kondisi: bekas, Technical details: Load capacity: 3.2 t Span: 3,200 mm Kedpfx Asu Nvftjfislr Approx. machine weight: 1 t Rear-mounted crossbeam sold

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: Plate length: 5500 mm Plate width: 1500 mm Plate height: 250 mm Approx. machine weight: 6.5 t Required space approx.: 5.5 x 1.5 m Kedou N Dnvepfx Afiolr - T-slot spacing = 542 / 500 mm with staggered parallel arrangement - T-slots according to DIN 650 - a = 28.0 mm; h = 48.0 mm; b = 48.0 mm; c = 22.0 mm - incl. leveling screws and end caps as per manufacturer's documentation.

Kondisi: bekas, Technical details: Width: 250 mm Depth: 180 mm Height: 250 mm Approx. machine weight: 30.0 kg 2 units available (price per unit) (Item no. 1104021 A is slightly narrower) Kljdpfx Afsu N Eb Deier *

Kondisi: bekas, en-GB Kledpfjvgbhkox Afier

Kondisi: bekas, de-tec-20240612-1 Ksdov U T Dyspfx Afislr