Beli Wmw Dlz 355 bekas (456)

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Fsdpsu N Ddwofx Aaqogb Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Fedpfju N Dfhox Aaqjgb Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, en-Technische Details: Plate length: 7040 mm Plate width: 2230 mm Fsdpfju N Dl Isx Aaqsgb Plate height: 330 mm Machine weight approx.: 12,800 kg per piece 2 cast steel plates available for sale. Surface finish: planed T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28mm, and distance between T-slots: 305mm The plates are equipped for side clamping/connection. Through holes: 11 pieces, Ø 28mm, continuous, with counterbore Ø 600mm x 260mm, and 12 pieces, Ø 28mm, continuous, with counterbore Ø 114mm x 270mm. Our price is per plate.

Kondisi: bekas, Technical details: Fjdpfx Aju N D Hrjaqsgb Plate length: 385 mm Plate width: 205 mm Plate thickness: 65 mm 8 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9; b = 24.2; c = 9.8; h = 19.9 mm

Kondisi: bekas, Technical Details: Plate length: 255 mm Plate thickness: 65 mm 4 plates available Fjdpsu N D Icofx Aaqogb T-slots according to DIN 650 for T-slot bolts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Kondisi: bekas, Technical details: Width: 200 mm Depth: 300 mm Height: 500 mm Machine weight approx.: 38 kg per bracket Fodpfx Asu N Ec Uoaqsgb 2 units available (price per unit)

Kondisi: bekas, en|Technical details: Table clamping surface: 330 x 310 machined mm Machine weight approx.: 25 kg Dimensions (L-W-H): 430 x 400 x 420 mm Application: Machine table Adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm, pitch 100mm Tiltable via gear guide +90° Fsdpfx Aou N Eineaqsgb Rotatable 360° Base surface Ø 350mm with 2 clamping slots Ø 17 x 25mm

Kondisi: bekas, Technical Details: Diameter: 375 mm Passage: 140 mm Width: 95 mm Machine weight approx.: 65 kg 3-jaw chuck with external jaws with flange mount, size Ø 375 x 20 mm; 2x adjustment bores Ø 24 x 15 mm, pitch circle Ø 173 mm; 3x clamping bolts Ø 26.5 x 60 mm, pitch circle Ø 174 mm Turning range min./max.: Ø 100 / Ø 310 mm Equipment: 1x chuck key Fedpfsu N Ezdsx Aaqsgb

Kondisi: bekas, Technical Details: Drilling capacity in steel (diameter): 13 mm Throat depth: 160 mm Drilling stroke: 60 mm Spindle taper: MT2 Spindle speed: 210 - 2,580 / 16 steps rpm Feed: manual mm/rev Table clamping surface: 200 x 185 mm (fixed) Max. distance spindle/table: 620 mm Table clamping surface: 260 x 265 mm (adjustable) Fodpsvgbdxofx Aaqogb Distance spindle/table max.: 160 - 460 mm Rotating table: yes ° Table adjustment: 300 mm (hand crank) Column diameter: approx. Ø 70 mm Total power requirement: 900 Watts Approx. machine weight: 90 kg Approx. machine dimensions (LxWxH): 0.6 x 0.31 x 1.7 m The machine is equipped with a RÖHM 1-13 drill chuck including chuck key. Right-hand spindle rotation. Small machine vice included *

Kondisi: bekas, en-001 Fgjdju N Dz Aepfx Aaqeb

Kondisi: bekas, Technical details: Table length: 1000 mm Table width: 1000 mm Approx. machine weight: 0.531 t Approx. space requirement: 1.0 x 1.0 x 0.8 m Fgsdpou Nkkkofx Aaqob The scribing plate is mounted on a sturdy welded construction made of 60 mm steel angle.

Kondisi: bekas, Technical details: Plate length: 660 mm Plate width: 450 mm Plate height: 70 mm Pass-through opening in the table: Ø 115 mm Machine weight approx.: 111 kg Required space approx.: 660x450x70 mm Pass-through hole: 115 mm Fsdsu Nkpyepfx Aaqogb T-slots: according to DIN 650 and 508 - a = 22 mm - b = 38 mm - h = 40 mm - c = 17 mm

Kondisi: bekas, en001 Fedpfx Aaeu Nurfeqsgb

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm Fedpfx Aaju N A Uujqjgb - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Fjdju N A U Ijpfx Aaqogb

Kondisi: bekas, Technical details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Approx. machine weight: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Fgedpou N Dhiofx Aaqeb Ram plate removed from a PYE 160S press - with central through-hole Ø 40 mm - with 6x pitch circle holes Ø 16 mm, pitch circle Ø 160 mm - diagonal T-slot according to DIN 650 (a = 19 mm; h = 25 mm; b = 38 mm; c = 16 mm) - with support plate underneath = spacing approx. 410 mm

Kondisi: bekas, Technical details: Fgsdpfx Aou N Dyrjaqeb Plate length: 1100 mm Plate width: 700 mm Plate height: 85 mm Approx. machine weight: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48; c=24mm; Center distance 76mm

Kondisi: bekas, Technical details: Width: 350 mm Depth: 120 mm without plate Height: 315 mm without plate Fjdpfx Aaou N Eczjqogb 3 units available with base plate (A+B+C) 1 unit available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30 mm Price per unit

Kondisi: bekas, Technical details: Fgjdou N E Anopfx Aaqeb Faceplate diameter: 800 mm Width: 140 mm Weight: 330 + 50 kg This faceplate does not include clamping claws. Clamping is done using the corresponding clamping plate Ø 790 x 26 mm. The clamping slots, each 300 mm in length, are arranged radially. T-slots according to DIN 650: a = 22 mm; h = 37 mm; b = 40 mm; c = 17 mm Flange mounting: Mounting surface external Ø 410 mm and internal Ø 195 mm 6x clamping bolts on a bolt circle Ø 235 mm Clamping plate: 4x through holes Ø 20.5 mm arranged on a bolt circle Ø 630 mm Various clamping holes M20 / M16 and M12 arranged in different positions Equipment: 4 pieces of clamping screws M20 with clamping straps

Kondisi: bekas, Technical details: Machine weight approx.: 160 kg Machine dimensions (LxWxH) approx.: 0.58 x 0.50 x 0.3 m Fedou N E Dxopfx Aaqjgb Swiveling: no Rotary movement: 360 degrees Application: For auxiliary tasks, e.g., marking out divisions - Dividing head with clamping chuck Ø 370 mm with external 4-jaw clamping - Pitch circle with 15/16/17/18/19/20 divisions, 360°; 360° rotation - 360° rotation via radial scale

Kondisi: bekas, Technical details: Width: 190 mm Depth: 315 mm Height: 500 mm Approx. machine weight: 60 kg Fedpfxsu S Hzus Aaqsgb 1 piece (positioned at the rear in the photo) T-slot to DIN 650: T-slot width a = 28 mm; h = 42 mm; b = 47.5 mm; 19.5 mm, T-slot spacing 160 mm

Kondisi: bekas, Technical details: Width: 500 mm Depth: 260 mm Fgedsu S H Nlspfx Aaqjb Height: 795 mm Approx. machine weight: 320 kg per unit 2 units available (price per unit) without T-slots Base clamping slot (long hole): Ø 39 x 130 mm

Kondisi: bekas, Technical details: Width: 625 mm Fgodpfou S H Stox Aaqjb Depth: 520 mm Height: 820 mm Approx. machine weight: 300 kg per unit 2 units available (price per unit) without T-slots Long hole Ø 33 x 330 mm *

Kondisi: bekas, Tahun pembuatan: 1957, Detail teknis: Kapasitas pengeboran pada baja (diameter): 20 mm Overhang: 220 mm Stroke pengeboran: 85 mm Jarak spindel/meja maks.: maks. 260 mm Rentang kecepatan: sabuk V rpm Taper spindel MK: 2 Fgodpfx Aeu Id D Uoaqjb Ukuran bidang penjepitan meja: 220 x 280 mm Ukuran bidang penjepitan base plate: 225 x 280 mm Jarak pusat spindel ke base plate: maks. 380 mm Kebutuhan daya total: 0,33 kW Berat mesin sekitar: 125 kg Dimensi P x L x T: 0,8 x 0,4 x 0,8 m Meja dapat diputar 380 V dengan kabel sambungan 2500 mm

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Fgjdou Ix Hdepfx Aaqsb Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included