Beli Wmw bekas (447)

Kondisi: bekas, en-001 Hodpfxeu N Dz Aj Al Isl

Kondisi: bekas, Technical details: Hjdpeu S Hzujfx Al Ijl Width: 190 mm Depth: 315 mm Height: 500 mm Approx. machine weight: 60 kg 1 piece (positioned at the rear in the photo) T-slot to DIN 650: T-slot width a = 28 mm; h = 42 mm; b = 47.5 mm; 19.5 mm, T-slot spacing 160 mm

Kondisi: bekas, Technical details: Width: 500 mm Depth: 260 mm Height: 795 mm Approx. machine weight: 320 kg per unit 2 units available (price per unit) without T-slots Base clamping slot (long hole): Ø 39 x 130 mm Hjdpfx Alju S H Nls Iel

Kondisi: bekas, Technical details: Width: 625 mm Depth: 520 mm Height: 820 mm Approx. machine weight: 300 kg per unit Hsdeu S H Stepfx Al Isl 2 units available (price per unit) without T-slots Long hole Ø 33 x 330 mm *

Kondisi: bekas, Tahun pembuatan: 1957, Detail teknis: Kapasitas pengeboran pada baja (diameter): 20 mm Overhang: 220 mm Stroke pengeboran: 85 mm Jarak spindel/meja maks.: maks. 260 mm Rentang kecepatan: sabuk V rpm Taper spindel MK: 2 Ukuran bidang penjepitan meja: 220 x 280 mm Ukuran bidang penjepitan base plate: 225 x 280 mm Jarak pusat spindel ke base plate: maks. 380 mm Kebutuhan daya total: 0,33 kW Berat mesin sekitar: 125 kg Dimensi P x L x T: 0,8 x 0,4 x 0,8 m Meja dapat diputar Hsdpfju Id D Usx Al Ijl 380 V dengan kabel sambungan 2500 mm

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Hodpfxou Ix Hde Al Iel Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Hedpfxeu Ix Hqj Al Iol Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Hjdpfxju Ndb As Al Iol Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Milling beam extendable by approx. 350 mm. The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: bekas, Technical details: Table length: 1000 mm Table width: 1000 mm Approx. machine weight: 0.531 t Hjdju Nkkkjpfx Al Ijl Approx. space requirement: 1.0 x 1.0 x 0.8 m The scribing plate is mounted on a sturdy welded construction made of 60 mm steel angle.

Kondisi: bekas, Technical details: Plate length: 660 mm Plate width: 450 mm Hsdpfx Alju Nkpys Iol Plate height: 70 mm Pass-through opening in the table: Ø 115 mm Machine weight approx.: 111 kg Required space approx.: 660x450x70 mm Pass-through hole: 115 mm T-slots: according to DIN 650 and 508 - a = 22 mm - b = 38 mm - h = 40 mm - c = 17 mm

Kondisi: bekas, en001 Hsdpfxeu Nurfo Al Isl

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Hedpfx Alsu N A Uue Iel Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Hodju N A U Iepfx Al Ijl

Kondisi: bekas, Technical details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Approx. machine weight: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Ram plate removed from a PYE 160S press - with central through-hole Ø 40 mm - with 6x pitch circle holes Ø 16 mm, pitch circle Ø 160 mm - diagonal T-slot according to DIN 650 (a = 19 mm; h = 25 mm; b = 38 mm; c = 16 mm) Hodju N Dhiopfx Al Iel - with support plate underneath = spacing approx. 410 mm

Kondisi: bekas, Technical details: Plate length: 1100 mm Plate width: 700 mm Plate height: 85 mm Hjdpeu N Dyrefx Al Iel Approx. machine weight: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48; c=24mm; Center distance 76mm

Kondisi: bekas, Technical details: Width: 350 mm Depth: 120 mm without plate Height: 315 mm without plate 3 units available with base plate (A+B+C) 1 unit available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30 mm Hsdpfou N Eczsx Al Iol Price per unit

Kondisi: bekas, Technical details: Faceplate diameter: 800 mm Width: 140 mm Weight: 330 + 50 kg This faceplate does not include clamping claws. Clamping is done using the corresponding clamping plate Ø 790 x 26 mm. The clamping slots, each 300 mm in length, are arranged radially. Hedpfx Aeu N E Ansl Ijl T-slots according to DIN 650: a = 22 mm; h = 37 mm; b = 40 mm; c = 17 mm Flange mounting: Mounting surface external Ø 410 mm and internal Ø 195 mm 6x clamping bolts on a bolt circle Ø 235 mm Clamping plate: 4x through holes Ø 20.5 mm arranged on a bolt circle Ø 630 mm Various clamping holes M20 / M16 and M12 arranged in different positions Equipment: 4 pieces of clamping screws M20 with clamping straps

Kondisi: bekas, Technical details: Machine weight approx.: 160 kg Machine dimensions (LxWxH) approx.: 0.58 x 0.50 x 0.3 m Swiveling: no Rotary movement: 360 degrees Application: For auxiliary tasks, e.g., marking out divisions - Dividing head with clamping chuck Ø 370 mm with external 4-jaw clamping - Pitch circle with 15/16/17/18/19/20 divisions, 360°; 360° rotation - 360° rotation via radial scale Hodpfeu N E Dxex Al Iol

Kondisi: bekas, Technical details: Width: 400 mm Depth: 335 mm Height: 500 mm 2 pieces available (price per piece) Material: Cast steel Hodpfx Aljwfrq So Iel Transverse slots: Number: 4 Size: a = 22 mm, h = 41 mm, b = 37 mm, c = 15 mm Clamping boreholes: Number: 8; Size: 4 x 22 mm / 4 x 26 mm

Kondisi: bekas, Technical Details: Table length: 1100 mm Table width: 800 mm Table height: 100 mm Hsdpfx Alsu Nkluo Iol Number of T-slots: 3 T-slot spacing: 300 mm Machine weight approx.: 650 kg T-slots according to DIN 650 and 508 - Width a: 30 mm - Width b: 50 mm - Height c: 30 mm - Height h: 50 mm

Kondisi: bekas, Technical details: Table diameter: 300 mm Table height: 250 mm Rotational movement: 360 degrees Passage: 40 mm Tiltable: single-sided 90° Machine weight approx.: 126 kg Dimensions (LxWxH): 0.65 x 0.52 x 0.25 m Base footprint: 380x330 mm T-slots: according to DIN 650 and 508 T-slots: 4x 163 mm long and 4x 135 mm long - a = 12 mm Hodpfx Aleu Nknpj Iol - h = 19 mm - b = 21 mm - c = 9 mm

Kondisi: bekas, Technical details: Hjdpfx Aju Nkrnjl Ijl Length: 640 mm Width: 465 mm Clamping plate thickness: 90 mm Machine weight approx.: 70 kg Marking plate - spotting plate - steel plate *

Kondisi: bekas, Technical details: Faceplate diameter: 350 mm Width: 80 mm Bore diameter: 50 mm Machine weight approx.: 32.0 kg Hodpfx Aou Nk T Sel Iol Dimensions: 350x125 mm - Faceplate with 4 internal/external clamping jaws (clamping stroke 80 mm) - Internal clamping range: Ø 110–350 mm and external: Ø 40–300 mm - Flange mounting Ø 130 mm - Material: steel

Kondisi: bekas, Technical details: Load capacity: 3.2 t Span: 3,200 mm Approx. machine weight: 1 t Rear-mounted crossbeam sold Hsdpfou Nvftsx Al Iel

Kondisi: bekas, Technical details: X-axis travel: 130 mm y-axis travel: - mm z-axis travel: 140 mm Machine weight approx.: 107 kg Dimensions (L x W x H): 0.72 x 0.33 x 0.63 m Runout testing and presetting device (benchtop unit) - Application: Measuring device for production parts (helical gears), inspection and adjustment of milling tools Hedpfx Alju N Apfj Iol Features: - Longitudinal axis approx. 100 mm, Ø 280 mm - Tool carriage: swiveling range 360°, tool holder Ø 30 x 80 mm, size (LxW): 200 x 175 mm, with measuring bar Ø 8 x 400 mm, adjustable - Vertical slide: test arbor Ø 20 x 80 mm