Meja putar las, perangkat berputar,

OBE 2000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, 2000 kg load capacity Freestanding, braked rotary device for fixture construction, toolmaking Suitable for assembly, welding, painting, etc. With foot remote control Switchable right / left rotation Machine is technically as new, barely used Ncodpfxehwv Rvo Abvop Dimensions: Height to axle center 850 mm Additional machines of this type in various sizes in stock. Load capacities from 500 kg to 5000 kg.

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Nsdpsgtm U Asfx Abvocp Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Ncodpfxst Hw Iij Abvsp Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, daya laser: 4.000 W, EN Nodpfx Abjuthz Tovecp

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Ncjdpfx Ajd N H A Nsbvjp Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: bekas, Clamping plate - table of a long planing machine - Ncodpfx Aebn Amfsbvop Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: xxxx, High-Performance Tabletop Tapping Machines on T-Slot Plate Technical Specifications: - Tapping capacity approx.: M 3 – M 16 - Speed range up to: 500 rpm - Working area (pivot radius): 2500 mm - Quick-change tool holder Size 2, Ø 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots: 2050 x 900 mm - Table height: 910 mm - Machine vice with jaw width: 200 mm - 3-jaw chuck: 250 mm - Pneumatic connection with pressure regulator - Mobile base frame Nedpfxjf Tcy Do Abvecp - Space requirement approx.: W 2400 x H 2000 x D 1000 mm - Weight approx.: 1100 kg

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ncsdpfx Asdlcy Hjbvjp Ram area 350 x 355 mm Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Additional information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This state-of-the-art CNC-controlled notching system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location in the machine using a pulling gripper carriage along the roller conveyor. A robotic arm fitted with cutting units (oxy-fuel or plasma) performs the cuts or notching operations at the selected position. The cut or notched, finished components either drop into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 beam notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD serves as the plasma power source, suitable for material thicknesses up to 32 mm. Thicker material sections or phase cuts over 32 mm are handled by the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain-drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. The profiles are then moved into the machine on a sturdy roller conveyor with a gripper carriage. The system is designed for profiles up to 12 m long and therefore features 12 m roller conveyors on both the infeed and outfeed sides, each with a roller conveyor width of 1,300 mm. For removal of finished parts on the outfeed side, there are four chain-drag transverse conveyors each 6,450 mm long located after the notching system. Ncedpfx Ajtwm Ubobvjp Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC controller from Mitrol. The reliable CNC control unit is produced by Ficep's in-house supplier Mitrol and operates with Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit: The extraction filter unit is from Donaldson Torit DCE. Safety: Perimeter fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Welding positioner KT 50 Load capacity horizontal: 50 kg, tilted: 25 kg Nsdpfx Asd A Etysbvjcp Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilt range: stepless adjustment via geared crank motor, 0 – 90° Speed: 1.7 – 15 rpm Incl. foot remote control