Rak kantileverKragarmregal doppelseitig Höhe 3.500 mm
Tiefe je Seite 1.200 mm / Länge 4.000 mm
Rak kantilever
Kragarmregal doppelseitig Höhe 3.500 mm
Tiefe je Seite 1.200 mm / Länge 4.000 mm
VB ditambah PPN
€3.130
tahun pembuatan
2024
Kondisi
Bekas
Lokasi
Bad Feilnbach 

Gambar menunjukkan
Tampilkan peta
Data mesin
Harga & Lokasi
VB ditambah PPN
€3.130
- Lokasi:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland
Hubungi
Rincian penawaran
- ID iklan:
- A10755698
- pembaruan:
- terakhir pada 28.01.2025
Deskripsi
Used double-sided cantilever racking: Hot-dip galvanized bolted system
Scope of delivery:
- 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm
- 24 cantilever arms, 1,200 mm deep, standard
- Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing
- Incl. mounting material (without floor anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts reorder and extension possible at any time)
- (*Also available in larger quantities: 20 uprights in stock)
Detailed description:
- Sturdy steel construction made from IPE profiles
- All components hot-dip galvanized
- Load capacity per upright side 2,250 kg
- Load capacity per cantilever arm 750 kg
- Cantilever arms height-adjustable in 100 mm increments
- Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard
= 4 storage levels per upright side
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Rack length: 4,000 mm
- Including mounting material (without floor anchors)
- With assembly instructions and load signs C4 according to DIN standard
- Expert telephone consultation
- Made in Germany
- Short delivery times
- On-site pickup possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable shipping with advance notification before delivery.
Material is packed sensibly for easy unloading.
Crsdjmkixwspfx Ag Ujh
When installed outdoors, the load capacities are reduced due to wind and snow loads.
The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads.
The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer.
The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended.
According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Scope of delivery:
- 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm
- 24 cantilever arms, 1,200 mm deep, standard
- Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing
- Incl. mounting material (without floor anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts reorder and extension possible at any time)
- (*Also available in larger quantities: 20 uprights in stock)
Detailed description:
- Sturdy steel construction made from IPE profiles
- All components hot-dip galvanized
- Load capacity per upright side 2,250 kg
- Load capacity per cantilever arm 750 kg
- Cantilever arms height-adjustable in 100 mm increments
- Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard
= 4 storage levels per upright side
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Rack length: 4,000 mm
- Including mounting material (without floor anchors)
- With assembly instructions and load signs C4 according to DIN standard
- Expert telephone consultation
- Made in Germany
- Short delivery times
- On-site pickup possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable shipping with advance notification before delivery.
Material is packed sensibly for easy unloading.
Crsdjmkixwspfx Ag Ujh
When installed outdoors, the load capacities are reduced due to wind and snow loads.
The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads.
The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer.
The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended.
According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Penyedia
Catatan: Daftar gratis atau masuk, untuk mengakses semua informasi.
Terdaftar sejak: 2019
Kirim permintaan
Telepon & Faks
+49 8064 ... iklan
Iklan Anda telah berhasil dihapus
Terjadi kesalahan