2006 ORMA EUROPA/PLUS

ORMA EUROPA/PLUS

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Perlengkapan dan data teknis: - Spindel frais tetap; bantalan baru - Dengan perpanjangan meja dan penyangga rangka tarik 2500 mm - Motor 5,5 kW - Kecepatan 3000/4500/6000/8000/10000 rpm - Penghenti frais dengan 2 pengaturan: - penghenti penuh - rahang pelepas belakang - Hood penghisap: 2 x 120 mm - Rem motor otomatis - Putaran kanan-kiri - Dengan feeder Haffner 4 rol Berat sekitar 700 kg Ketersediaan: sesuai kesepakatan Fjdpfx Aew I Uinjagjpd Lokasi: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support Fpsdpfx Aoxnlgceagsd TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2026, Working width: 4500 mm Working height: 3000 mm Number of pressure cylinders: 6 pcs. Dimensions (L x W x H): 5500 x 1400 x 3550 mm Weight: 3000 kg S&S Frame Press Bavaria 2000 L, year of manufacture: 2026 ----- SHORT DELIVERY TIME available from stock at Engelfried, 73447 Oberkochen! NEW for Holz-Handwerk 2026 in Nuremberg: Now also with semi-automatic positioning of vertical press cylinders 1, 2, and 3 via enabling button, including ON/OFF selector switch for beam 2. With automatic press cycle + manual control for mortise & tenon and dowel/cut tenon corner joints, toggle switch changeover on the control cabinet. Fpedpfxjwg Hr Tj Aagod Basic configuration prepared for optional use of counter profiles if sashes are rebated on the loose part. CE version Base machine in the strongest frame-welded design with thick-walled, special box sections. Guideways for the pressure rails in the press corners are low-wear machined. Fast, smooth manual width adjustment by ball-bearing carriage, locking in 50 mm pitch holes, optionally with motor-driven width adjustment and hydraulic clamping (at extra cost). Height adjustment and pressing by long-stroke cylinders in a single cycle. Right-side press corners with integrated horizontal cylinders, so no vertical positioning of horizontal pressure cylinders is required, preventing cylinder collision. Lower stop beam can be set to optimal height in several positions. 3 kW compact hydraulic unit with integrated control block, variable pressure adjustment from 20–120 bar, manometer included. Operation via push buttons with separate control circuits for vertical and horizontal press cylinders, installed on free-movable control console. 2 double-acting vertical press cylinders, stroke adapted to working height, piston diameter 60 mm, max. pressure force per cylinder 2100 kg 2 double-acting horizontal press cylinders, 80 mm stroke, piston diameter 40 mm, max. pressure force per cylinder 1250 kg Support and pressure plate depth: 100 mm Control cabinet at machine base left, 400 Volt, 50 Hz Machine delivered ready for connection, 16 A plug. Paint: RAL 7035 light gray, with RAL 7016 anthracite gray trim. Working dimensions: L x H = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (L x H) Required space: 5,600 x 1,400 x 3,550 mm (L x W x H) Accessory: Center pressure beam complete with pressure cylinder, pressure hose, and shut-off valve up to 2,750 mm height Note: Actual working height is 3,000 mm Accessory: Individual pressure control for center pressure beam, pressure adjustment range up to max. 100 bar (for pressing cross-mullion windows) Accessory: Infinitely height-adjustable lateral pressure device, complete with pressure cylinder and support, throttle and shut-off valve Accessory: Individual pressure control for lateral pressure device, pressure adjustment range up to max. 100 bar (for pressing cross-mullion windows) Accessory: Shut-off valve for 3rd vertical cylinder Accessory: Shut-off valve for upper horizontal cylinder Accessory: Shut-off valve for lower horizontal cylinder Acces...

Kondisi: baru, 1 Fpodpfxonzh Hfs Aagsd

Kondisi: bekas, Arbeitsbreite: 3,500 mm Arbeitshöhe: 2,550 mm Anzahl der Druckzylinder: 6 Stück Lademaße (L x B x H): 4,500 x 950 x 2,900 mm Hess Speedy Rahmenpresse ----- Generalüberholt Max. Einlegemaß / Presslänge: 3,500 mm Max. Einlegemaß / Presshöhe: 2,550 mm Schiebeschlitten zur Breiteneinstellung, arretierbar im 50-mm-Doppellochrastersystem Elektrische Höhenverstellung der Langhubzylinder (hydraulisch) 4-fach vorwählbare Einlegehöhe der Widerlagerplatten 3 Vertikaldruckzylinder, Hub: 1,000 mm, Druckkraft pro Zylinder: 20,000 N 3 Horizontaldruckzylinder, Hub: 80 mm, Druckkraft pro Zylinder: 12,500 N Druckplattetiefe: 100 mm, Plattenbreite: 140 mm 50 mm Raster für Zylinderfixierung und Gegenlager Mitteldruckbalken mit Absperrventil Enddruckabschaltung und Nachdruckregelung Tastergesteuerte Bedienung für Steuerung und Pressablauf Einstellbarer Pressdruck: 25 – 160 bar Elektroanschluss: 2.2 kW / 400V Lieferumfang: - 3 Pendeldruckplatten für Schrägfenster - 1 Pendeldruckplatte für Spitzfenster Fpsdjxnqw Tepfx Aagjd - 1 Verlängerung für Pendeldruckplatte - 1 Kleinteilezulage Abbildungen und Video nicht original, zeigen jedoch ein baugleiches Modell. (Teknische Daten laut Hersteller – ohne Gewähr!)

Kondisi: bekas, Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Fpsdpfxovpr N Rs Aagsd

Kondisi: bekas, Tahun pembuatan: 1989, 1 Fpodpfx Aoliuihjaged

Tahun pembuatan: 2003, Kondisi: baik (bekas), nomor mesin/kendaraan: 02070325, Automatic dowel boring machine 2 horizontal boring units from the ends 3 vertical boring units from the top Lateral displacement of vertical boring units from above Vertical magazine Fpjdekn Ibuopfx Aagsd Return conveyor to operator

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 9.710 h, Fungsionalitas: berfungsi sepenuhnya, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Fpsdpfevpuvgjx Aaged Main drive Number of cutting heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with a robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. Included is a water purifier with a capacity of 600L/hour and a 1000L tank. The machine has 9,710 operation hours (utilization: 12%). The machine has been regularly and properly serviced, with documented invoices for spare parts. Additionally, the reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller, twice a year. Ideal for precision cutting with an operating area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), Hydraulic notching machine Manufacturer: BOSCHERT Model: K30-120 Very good condition, Year of manufacture: 1994 Technical specifications Manufacturer: BOSCHERT Model: K30-120 Year of manufacture: 1994 Cutting capacity: 6 mm in St 40 / 4 mm in stainless steel Blade length: 200 mm Fpedpfx Aohygztsaged Cutting angle: 30-120° Stroke: 40 mm Table height: 900 mm Connected load: 6 kVA Weight: approx. 1,600 kg Dimensions: approx. 1,500 x 1,200 x 1,300 mm All information subject to verification. The machine is in very good condition. A powered demonstration can be arranged at any time in our showroom.