Mesin press veneer

OTT 300K100

Kondisi: bekas, Press Rak OTT 300K100 Panjang rak: 255 cm Lebar: 135 cm Jarak antar rak: 350 mm Rak berwarna emas yang bagus, namun terdapat satu penyok berdiameter sekitar 3 cm Pemanasan listrik Diameter piston: 100 mm, 4 piston Berat sekitar 3,2 ton Rsdsyh H Uyspfx Alast Mesin tersedia di gudang, bisa diuji

Kondisi: baik (bekas), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roller diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin-walled): Ø 70x1.5mm, minimum bending radius Ø 700 mm Tube capacity (thick-walled): Ø 2" x 3.2 mm, minimum bending radius Ø 450 mm Angle bar capacity: 50x50x6 mm, minimum bending radius Ø 400 mm Flat bar capacity: 50x10 mm, minimum bending radius Ø 250 mm Flat bar capacity (on edge): 100x15 mm, minimum bending radius Ø 250 mm Box section capacity: 50x50x3 mm, minimum bending radius Ø 500 mm Shaft capacity: Ø 35 mm, minimum bending radius Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm Redpjw Hx Tvofx Alast

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm Redoycuuyepfx Alast • Heating: electric, connected load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones • Housing temperature measuring points: 6 • Material temperature measuring point: 1 • Material pressure measuring point: 1 Barrel configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Several closed barrels with ports for either liquid injection or measuring points • Venting barrel General features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive unit and process section mounted on a robust base frame Applications: • Plastic compounding • Masterbatch production • Additive and filler incorporation • Laboratory and pilot plant applications • Formulation and product development Condition & Operating Hours: According to the hour meter, the machine has operated for less than a year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: On request, we offer design and installation of suitable tooling, e.g. strand dies, as well as the integration of additional peripherals such as screen changers, pelletizing systems, dosing technology, or other customer-specific components. The machine can therefore be individually configured and delivered ready for operation according to customer requirements.

Kondisi: bekas, Tahun pembuatan: 2019, Used machine Year of manufacture: 2019 Features and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow flat teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement reading for: - horizontal saw cuts: via scale and strip cutting stop - vertical saw cuts: via scale from 0 - 1,300 mm Extraction nozzle: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Distortion-free, free-standing machine frame Pneumatic retractable slatted frame Round bar guides vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunging of the saw unit Pneumatic saw head lock Control unit at the saw unit: start button, stop button Control panel with document holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Rodswka Ntopfx Alaet Location: Flörsheim Availability: short notice

Kondisi: baru, Tahun pembuatan: 2026, Build size: 6 Nominal heat output: 170 kW -- Complies with 2nd BImSchV and CE -- Rjdpjdlhdbefx Alajt Combustion chamber fully lined with fireclay For spaces up to: 4,800 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, wood briquettes Fuel consumption: 40–50 kg/h Fan air volume, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Flue gas outlet connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 Volt

Kondisi: bekas, Mesin bekas Perlengkapan dan Data Teknis: - Luas penekanan: 2.200 × 1.100 mm - Jumlah silinder: 4 - Tekanan tekan maksimum: 60 ton - Desain: 1 tingkat - Plat pemanas: pelat hemat energi ELKOM beranodisasi emas - Jarak buka: 350 mm - Daya terpasang: 14 kW - Diameter piston: 80 mm - Tekanan operasi: 365 bar Rjdowpm I Hjpfx Alajt Dimensi: 2.600 mm × 1.250 mm × 1.750 mm Ketersediaan: segera Lokasi: Röllbach

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Rodpfx Aotr U Hlslaet Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół roboczy: stół rastrowy aluminiowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Nr seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 - praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Rodpfx Aleuu Ntgoast Silnik główny: 6,6 kW Konstrukcja bramowa: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 r. - jedna umieszczona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h. Interfejs do odczytu formatów CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors Rodsttah Ropfx Alajt → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 300 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 356801, jangkauan lengan: 706 mm, Mesin robot las TIG hanya kami gunakan selama 2 bulan. Mesin dalam kondisi sangat baik. Sistem hisap belum pernah digunakan. Penutup mesin beserta meja las sudah termasuk. Pemrograman 'Ready2_pilot' dan pengumpan material untuk pengelasan dapat dipasang kapan saja sesuai kebutuhan. Rjdexw R Nnspfx Alajt