Mesin pelapis tepi Ott Atlantic V6F

Ott Atlantic V6F

Kondisi: baik (bekas), Tahun pembuatan: 2002, Edge banding machine with jointing milling, otherwise fully equipped, PU adhesive can be used. Cjlhcjgmn H Ajdw Eopw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, lebar benda kerja (maks.): 40 mm, tinggi total: 950 mm, panjang produk (maks.): 3.672 mm, This BRANDT edge banding machine, model Ambition 1110 KDF 110, was manufactured in 2016. It is a single-sided edge bander designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses ranging from 8 to 40 mm. Check the availability of this BRANDT edge bander Ambition 1110 KDF 110 for purchase. Contact us for further details. • Machine type: Single-sided edge bander for straight panel edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge material parameters • Workpiece thickness: 8–40 mm • Workpiece width: min. 70 mm (thickness 8–22 mm) or 120 mm (thickness 23–40 mm) • Edging material (coils): 0.4–3 mm • Edging material (strips): 0.4–3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one clockwise, one counter-clockwise) with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable for flush, radius, or chamfer trimming • Profile scraper: For rounding or chamfering prefabricated PVC edges (max. 3 mm) • Glue joint scraper: Removes residual glue in the glue joint area • Control and electrics • Control system: EASY CONTROL EC 10+ with 7” widescreen touchscreen • Program memory: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual adjustment of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for transport chain (standard) • Safety: CE compliant; dust tested (TRK max. 2 mg/m³) Cpsleyir S Njhcdw Esw Technical Specification Feed speed 8 m/min

Kondisi: sangat baik (bekas), Gold-anodised plates Working dimensions: 2.5 × 1.1 m Electric heating Fully operational, tested You can call or write to us. We can speak and write in German and Russian. Cpelhcju I N D Hsdw Esw You may also send messages in English. 31.3.5

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0, year of manufacture 2019. Configuration: - 1 pc. milling spindle, 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return system: draws the elements back to the operator or discharges them to the rear as a throughfeed machine. Element max. size: x 1250 x 50 mm Element min. size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Cslhcdovx Dz Dsw Eepw Supplied with full documentation and CE certificate. Very good condition. Immediately available.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Cpjlhjrq Ebfocdw Eew Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit - Cross-cutting unit Cpsljd Inktshcdw Eow - Milling unit - Fine milling unit - Scraper - Buffing unit

Kondisi: bekas, Tahun pembuatan: 2009, Panjang pemotongan: 4200 mm Lebar pemotongan: 3200 mm Maks. tonjolan mata gergaji: pada mata gergaji tegak 0° = 70 mm, pada mata gergaji miring 45° = 50 mm Kecepatan maju: 0-80 m/menit Kecepatan mundur: 100 m/menit Berat: sekitar 5400 kg Daya motor: 14 kW Skor mata gergaji pendahulu: 1,5 kW Alat: diameter: 350 mm Lubang: 30 mm Koneksi ekstraksi bawah: 140 mm Koneksi ekstraksi pada balok tekan: 100 mm Lokasi penyimpanan: Pemasok Celhcsyf Nu Tsdw Eopw

Kondisi: sangat baik (bekas), lebar total: 1.300 mm, panjang total: 3.500 mm, berat keseluruhan: 7.000 kg, tekanan kerja: 300 batang, lebar transportasi: 1.600 mm, tinggi transportasi: 2.350 mm, panjang transportasi: 4.350 mm, Press rak bertingkat untuk pelapisan veneer Simimpiantin 3500×1300 Panjang rak: 3500 mm Lebar rak: 1300 mm Dua slot pengisian Press dengan 8 silinder hidrolik Rak dipanaskan dengan air dari pemanas sentral Tekanan kerja maks: 300 bar Diameter piston: 80 mm Berat mesin: 7000 kg Dimensi mesin: 435x160x235 cm (T) Cpolhoxxpgbjcdw Eow

Kondisi: bekas, Tahun pembuatan: 2019, Used machine Year of manufacture: 2019 Features and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow flat teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement reading for: - horizontal saw cuts: via scale and strip cutting stop - vertical saw cuts: via scale from 0 - 1,300 mm Extraction nozzle: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Cpslhcdwjwka Nts Ejw Distortion-free, free-standing machine frame Pneumatic retractable slatted frame Round bar guides vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunging of the saw unit Pneumatic saw head lock Control unit at the saw unit: start button, stop button Control panel with document holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short notice

Kondisi: bekas, Tahun pembuatan: 1990, 04502 Ott JU 2511/70 Veneer Press Used, year of manufacture 1990 Electrohydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm (L x W) Celhcoxwp S Iodw Espw Heating: electric 4 hydraulic cylinders, each 80 mm diameter Total pressing force: 70 tons Specific pressing pressure: 2.5 - 3.5 kg/cm² Opening height: 400 mm Push-button controls for open - close - stop Pressure monitoring with automatic adjustment Adjustable limit switch for preset opening height HAWE pump Safety pull-cord Includes electric cable and plug (32 A) Includes electrical diagrams and operating manual as PDF Transport dimensions approx. 2900 x 1400 x 2000 mm (L x W x H) Weight approx. 3000 kg To avoid misunderstandings, on-site inspection is possible and recommended by prior appointment. Sale as is Technical specifications, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. No warranty is provided for used machines; they are sold “as inspected.” Payment terms: Prices plus statutory VAT, payment before collection or shipment. Delivery terms: ex stock